! Started logfile: J0632+1559_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:33:59 2019 obs J0632+1559_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0632+1559_S_2017_03_27_pus_uva.fits ! AN table 1: 172 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975581 visibilities/baseline/integration-bin. ! Found source: J0632+1559 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 30204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0632+1559_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 511 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.591625Jy sigma=0.005232 ! Fit after self-cal, rms=0.527745Jy sigma=0.004633 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=6.357 mas, bpa=-3.807 degrees ! Estimated noise=782.371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.496029 Jy ! Component: 100 - total flux cleaned = 0.700999 Jy ! Total flux subtracted in 100 components = 0.700999 Jy ! Clean residual min=-0.046374 max=0.206415 Jy/beam ! Clean residual mean=-0.000276 rms=0.014548 Jy/beam ! Combined flux in latest and established models = 0.700999 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.700999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335876Jy sigma=0.003092 ! Fit after self-cal, rms=0.332991Jy sigma=0.003073 ! Inverting map ! Added new window around map position (-4.5, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181251 Jy ! Component: 100 - total flux cleaned = 0.266155 Jy ! Total flux subtracted in 100 components = 0.266155 Jy ! Clean residual min=-0.025809 max=0.071037 Jy/beam ! Clean residual mean=-0.000159 rms=0.007558 Jy/beam ! Combined flux in latest and established models = 0.967154 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.967154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201729Jy sigma=0.001762 ! Fit after self-cal, rms=0.186913Jy sigma=0.001637 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0700942 Jy ! Component: 100 - total flux cleaned = 0.110165 Jy ! Total flux subtracted in 100 components = 0.110165 Jy ! Clean residual min=-0.016211 max=0.030711 Jy/beam ! Clean residual mean=-0.000114 rms=0.004538 Jy/beam ! Combined flux in latest and established models = 1.07732 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 37 components and 1.07732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150993Jy sigma=0.001254 ! Fit after self-cal, rms=0.148019Jy sigma=0.001229 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310591 Jy ! Component: 100 - total flux cleaned = 0.0500592 Jy ! Total flux subtracted in 100 components = 0.0500592 Jy ! Clean residual min=-0.015372 max=0.018560 Jy/beam ! Clean residual mean=-0.000094 rms=0.003802 Jy/beam ! Combined flux in latest and established models = 1.12738 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 51 components and 1.12738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138807Jy sigma=0.001127 ! Fit after self-cal, rms=0.138287Jy sigma=0.001122 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.47 mas, bmaj=7.284 mas, bpa=-4.16 degrees ! Estimated noise=492.327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0290804 Jy ! Component: 100 - total flux cleaned = 0.0489574 Jy ! Component: 150 - total flux cleaned = 0.063868 Jy ! Component: 200 - total flux cleaned = 0.0757044 Jy ! Total flux subtracted in 200 components = 0.0757044 Jy ! Clean residual min=-0.014331 max=0.015169 Jy/beam ! Clean residual mean=-0.000084 rms=0.003376 Jy/beam ! Combined flux in latest and established models = 1.20308 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 107 components and 1.20308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130335Jy sigma=0.001042 ! Fit after self-cal, rms=0.129149Jy sigma=0.001030 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.96 KP 1.02 ! LA 0.98 MK 0.98 NL 0.98 OV 1.08 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 1.00 KP 0.98 ! LA 0.94 MK 0.99 NL 1.06 OV 1.06 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.05 HN 0.99 KP 0.98 ! LA 0.99 MK 1.02 NL 1.08 OV 0.97 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 0.93 KP 1.00* ! LA 0.95 MK 1.08 NL 1.00* OV 1.28 ! PT 0.98 SC 1.48 ! ! ! Fit before self-cal, rms=0.129149Jy sigma=0.001030 ! Fit after self-cal, rms=0.123458Jy sigma=0.000901 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=7.304 mas, bpa=-4.193 degrees ! Estimated noise=490.225 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467495 Jy ! Component: 100 - total flux cleaned = 0.00923883 Jy ! Component: 150 - total flux cleaned = 0.0112103 Jy ! Component: 200 - total flux cleaned = 0.0125004 Jy ! Total flux subtracted in 200 components = 0.0125004 Jy ! Clean residual min=-0.008583 max=0.008693 Jy/beam ! Clean residual mean=-0.000016 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 1.21558 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 128 components and 1.21558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121987Jy sigma=0.000887 ! Fit after self-cal, rms=0.121787Jy sigma=0.000885 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121787Jy sigma=0.000885 ! Fit after self-cal, rms=0.105623Jy sigma=0.000795 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=7.31 mas, bpa=-4.123 degrees ! Estimated noise=490.583 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000640748 Jy ! Component: 100 - total flux cleaned = 0.000447257 Jy ! Component: 150 - total flux cleaned = 0.00135814 Jy ! Component: 200 - total flux cleaned = 0.00198865 Jy ! Total flux subtracted in 200 components = 0.00198865 Jy ! Clean residual min=-0.006292 max=0.006561 Jy/beam ! Clean residual mean=0.000001 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 1.21757 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 148 components and 1.21757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104780Jy sigma=0.000787 ! Fit after self-cal, rms=0.104547Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.63038e-05 Jy ! Component: 100 - total flux cleaned = 0.00112978 Jy ! Component: 150 - total flux cleaned = 0.00215213 Jy ! Component: 200 - total flux cleaned = 0.0026626 Jy ! Total flux subtracted in 200 components = 0.0026626 Jy ! Clean residual min=-0.005705 max=0.005859 Jy/beam ! Clean residual mean=0.000003 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 1.22023 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 155 components and 1.22023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104006Jy sigma=0.000780 ! Fit after self-cal, rms=0.103822Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103822Jy sigma=0.000778 ! Fit after self-cal, rms=0.103573Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=7.313 mas, bpa=-4.034 degrees ! Estimated noise=490.511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0005045 Jy ! Component: 100 - total flux cleaned = 0.000870694 Jy ! Component: 150 - total flux cleaned = 0.00200955 Jy ! Component: 200 - total flux cleaned = 0.00276922 Jy ! Total flux subtracted in 200 components = 0.00276922 Jy ! Clean residual min=-0.005240 max=0.005013 Jy/beam ! Clean residual mean=0.000002 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 1.223 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 158 components and 1.223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103159Jy sigma=0.000773 ! Fit after self-cal, rms=0.103003Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.38449e-05 Jy ! Component: 100 - total flux cleaned = 0.000651262 Jy ! Component: 150 - total flux cleaned = 0.00128174 Jy ! Component: 200 - total flux cleaned = 0.00183398 Jy ! Total flux subtracted in 200 components = 0.00183398 Jy ! Clean residual min=-0.004837 max=0.004627 Jy/beam ! Clean residual mean=0.000003 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 1.22484 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 163 components and 1.22484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102710Jy sigma=0.000769 ! Fit after self-cal, rms=0.102594Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102594Jy sigma=0.000768 ! Fit after self-cal, rms=0.102449Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.601 mas, bmaj=10.56 mas, bpa=-1.156 degrees ! Estimated noise=599.636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235184 Jy ! Component: 100 - total flux cleaned = 0.00345139 Jy ! Component: 150 - total flux cleaned = 0.00424117 Jy ! Component: 200 - total flux cleaned = 0.00471074 Jy ! Total flux subtracted in 200 components = 0.00471074 Jy ! Clean residual min=-0.003408 max=0.003899 Jy/beam ! Clean residual mean=0.000004 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 1.22955 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 186 components and 1.22955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102350Jy sigma=0.000767 ! Fit after self-cal, rms=0.102266Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.06263e-05 Jy ! Component: 100 - total flux cleaned = 0.000497187 Jy ! Component: 150 - total flux cleaned = 0.000892107 Jy ! Component: 200 - total flux cleaned = 0.00115934 Jy ! Total flux subtracted in 200 components = 0.00115934 Jy ! Clean residual min=-0.003495 max=0.003760 Jy/beam ! Clean residual mean=0.000005 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 1.23071 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 201 components and 1.23071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102193Jy sigma=0.000765 ! Fit after self-cal, rms=0.102124Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=7.313 mas, bpa=-3.947 degrees ! Estimated noise=490.657 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.487 x 7.313 at -3.947 degrees (North through East) ! Clean map min=-0.0042146 max=0.56819 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102124Jy sigma=0.000765 ! Fit after self-cal, rms=0.086828Jy sigma=0.000634 ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=7.313 mas, bpa=-3.826 degrees ! Estimated noise=491.201 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000649302 Jy ! Component: 100 - total flux cleaned = 0.000262604 Jy ! Component: 150 - total flux cleaned = 0.000691172 Jy ! Component: 200 - total flux cleaned = 0.000988457 Jy ! Total flux subtracted in 200 components = 0.000988457 Jy ! Clean residual min=-0.003929 max=0.004059 Jy/beam ! Clean residual mean=0.000001 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 1.2317 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 213 components and 1.2317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086599Jy sigma=0.000632 ! Fit after self-cal, rms=0.086511Jy sigma=0.000631 ! Inverting map ! Added new window around map position (-23.5, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025519 Jy ! Component: 100 - total flux cleaned = 0.00391801 Jy ! Component: 150 - total flux cleaned = 0.0046651 Jy ! Component: 200 - total flux cleaned = 0.00514898 Jy ! Total flux subtracted in 200 components = 0.00514898 Jy ! Clean residual min=-0.003560 max=0.002936 Jy/beam ! Clean residual mean=0.000001 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 1.23684 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 228 components and 1.23684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086235Jy sigma=0.000629 ! Fit after self-cal, rms=0.086184Jy sigma=0.000628 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086184Jy sigma=0.000628 ! Fit after self-cal, rms=0.086210Jy sigma=0.000628 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=6.41 mas, bpa=-3.539 degrees ! Estimated noise=787.719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.512437 Jy ! Component: 100 - total flux cleaned = 0.767331 Jy ! Component: 150 - total flux cleaned = 0.907498 Jy ! Component: 200 - total flux cleaned = 0.990654 Jy ! Total flux subtracted in 200 components = 0.990654 Jy ! Clean residual min=-0.014260 max=0.043045 Jy/beam ! Clean residual mean=-0.000119 rms=0.004533 Jy/beam ! Combined flux in latest and established models = 0.990654 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.990654 Jy ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=7.315 mas, bpa=-3.786 degrees ! Estimated noise=491.262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0694376 Jy ! Component: 100 - total flux cleaned = 0.110408 Jy ! Component: 150 - total flux cleaned = 0.138643 Jy ! Component: 200 - total flux cleaned = 0.159891 Jy ! Total flux subtracted in 200 components = 0.159891 Jy ! Clean residual min=-0.006348 max=0.012443 Jy/beam ! Clean residual mean=-0.000064 rms=0.002189 Jy/beam ! Combined flux in latest and established models = 1.15054 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 78 components and 1.15054 Jy ! Inverting map ! Added new window around map position (-8.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163828 Jy ! Component: 100 - total flux cleaned = 0.0292095 Jy ! Component: 150 - total flux cleaned = 0.0394132 Jy ! Component: 200 - total flux cleaned = 0.0476186 Jy ! Total flux subtracted in 200 components = 0.0476186 Jy ! Clean residual min=-0.003949 max=0.005844 Jy/beam ! Clean residual mean=-0.000025 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 1.19816 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 131 components and 1.19816 Jy ! Inverting map ! Added new window around map position (4.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692669 Jy ! Component: 100 - total flux cleaned = 0.0125502 Jy ! Component: 150 - total flux cleaned = 0.0172842 Jy ! Component: 200 - total flux cleaned = 0.0206959 Jy ! Total flux subtracted in 200 components = 0.0206959 Jy ! Clean residual min=-0.003563 max=0.003813 Jy/beam ! Clean residual mean=-0.000011 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 1.21886 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 165 components and 1.21886 Jy ! Inverting map ! Added new window around map position (-39.5, 23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316369 Jy ! Component: 100 - total flux cleaned = 0.0055653 Jy ! Component: 150 - total flux cleaned = 0.00759158 Jy ! Component: 200 - total flux cleaned = 0.00951153 Jy ! Total flux subtracted in 200 components = 0.00951153 Jy ! Clean residual min=-0.003321 max=0.002878 Jy/beam ! Clean residual mean=-0.000006 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 1.22837 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 201 components and 1.22837 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.602 mas, bmaj=10.56 mas, bpa=-1.02 degrees ! Estimated noise=599.606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346199 Jy ! Component: 100 - total flux cleaned = 0.00593807 Jy ! Component: 150 - total flux cleaned = 0.00741458 Jy ! Component: 200 - total flux cleaned = 0.00810996 Jy ! Total flux subtracted in 200 components = 0.00810996 Jy ! Clean residual min=-0.002410 max=0.002581 Jy/beam ! Clean residual mean=-0.000004 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 1.23648 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331186 Jy ! Component: 100 - total flux cleaned = 0.000475882 Jy ! Component: 150 - total flux cleaned = 0.000651026 Jy ! Component: 200 - total flux cleaned = 0.000770523 Jy ! Total flux subtracted in 200 components = 0.000770523 Jy ! Clean residual min=-0.002364 max=0.002519 Jy/beam ! Clean residual mean=-0.000003 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 1.23725 Jy ! Adding 128 model components to the UV plane model. ! The established model now contains 321 components and 1.23725 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=7.315 mas, bpa=-3.786 degrees ! Estimated noise=491.262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.00148e-05 Jy ! Component: 100 - total flux cleaned = 0.000224244 Jy ! Component: 150 - total flux cleaned = 0.000655705 Jy ! Component: 200 - total flux cleaned = 0.00076976 Jy ! Total flux subtracted in 200 components = 0.00076976 Jy ! Clean residual min=-0.003026 max=0.002509 Jy/beam ! Clean residual mean=-0.000001 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 1.23802 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 343 components and 1.23802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085527Jy sigma=0.000622 ! Fit after self-cal, rms=0.085425Jy sigma=0.000621 wmodel J0632+1559_S_2017_03_27_pus_map.mod ! Writing 343 model components to file: J0632+1559_S_2017_03_27_pus_map.mod wobs J0632+1559_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0632+1559_S_2017_03_27_pus_uvs.fits wwins J0632+1559_S_2017_03_27_pus_map.win ! wwins: Wrote 7 windows to J0632+1559_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125825 Jy ! Component: 100 - total flux cleaned = -0.00154904 Jy ! Component: 150 - total flux cleaned = -0.00166726 Jy ! Component: 200 - total flux cleaned = -0.00177861 Jy ! Component: 250 - total flux cleaned = -0.00188598 Jy ! Component: 300 - total flux cleaned = -0.00188661 Jy ! Component: 350 - total flux cleaned = -0.00178589 Jy ! Component: 400 - total flux cleaned = -0.00165512 Jy ! Component: 450 - total flux cleaned = -0.00152725 Jy ! Component: 500 - total flux cleaned = -0.00137224 Jy ! Component: 550 - total flux cleaned = -0.00128063 Jy ! Component: 600 - total flux cleaned = -0.00113207 Jy ! Component: 650 - total flux cleaned = -0.000957193 Jy ! Component: 700 - total flux cleaned = -0.000813921 Jy ! Component: 750 - total flux cleaned = -0.000672853 Jy ! Component: 800 - total flux cleaned = -0.000617394 Jy ! Component: 850 - total flux cleaned = -0.000453624 Jy ! Component: 900 - total flux cleaned = -0.000453594 Jy ! Component: 950 - total flux cleaned = -0.0003209 Jy ! Component: 1000 - total flux cleaned = -0.000242196 Jy ! Component: 1050 - total flux cleaned = -0.000216223 Jy ! Component: 1100 - total flux cleaned = 3.73877e-05 Jy ! Component: 1150 - total flux cleaned = 6.18876e-05 Jy ! Component: 1200 - total flux cleaned = 0.000136429 Jy ! Component: 1250 - total flux cleaned = 0.000282912 Jy ! Component: 1300 - total flux cleaned = 0.000355905 Jy ! Component: 1350 - total flux cleaned = 0.00052236 Jy ! Component: 1400 - total flux cleaned = 0.000639562 Jy ! Component: 1450 - total flux cleaned = 0.000709201 Jy ! Component: 1500 - total flux cleaned = 0.000732253 Jy ! Component: 1550 - total flux cleaned = 0.000800855 Jy ! Component: 1600 - total flux cleaned = 0.000979927 Jy ! Component: 1650 - total flux cleaned = 0.00104641 Jy ! Component: 1700 - total flux cleaned = 0.00115626 Jy ! Component: 1750 - total flux cleaned = 0.00122079 Jy ! Component: 1800 - total flux cleaned = 0.0013921 Jy ! Component: 1850 - total flux cleaned = 0.00141321 Jy ! Component: 1900 - total flux cleaned = 0.00149707 Jy ! Component: 1950 - total flux cleaned = 0.00153857 Jy ! Component: 2000 - total flux cleaned = 0.00155943 Jy ! Component: 2050 - total flux cleaned = 0.00162054 Jy ! Component: 2100 - total flux cleaned = 0.00172088 Jy ! Component: 2150 - total flux cleaned = 0.00178075 Jy ! Component: 2200 - total flux cleaned = 0.00189862 Jy ! Component: 2250 - total flux cleaned = 0.00184011 Jy ! Component: 2300 - total flux cleaned = 0.00191761 Jy ! Component: 2350 - total flux cleaned = 0.00193712 Jy ! Component: 2400 - total flux cleaned = 0.00201282 Jy ! Component: 2450 - total flux cleaned = 0.002088 Jy ! Component: 2500 - total flux cleaned = 0.00206948 Jy ! Component: 2550 - total flux cleaned = 0.00216164 Jy ! Component: 2600 - total flux cleaned = 0.00217984 Jy ! Component: 2650 - total flux cleaned = 0.0022523 Jy ! Component: 2700 - total flux cleaned = 0.00225225 Jy ! Component: 2750 - total flux cleaned = 0.00232357 Jy ! Component: 2800 - total flux cleaned = 0.00239394 Jy ! Component: 2850 - total flux cleaned = 0.00242912 Jy ! Component: 2900 - total flux cleaned = 0.00249841 Jy ! Component: 2950 - total flux cleaned = 0.00253277 Jy ! Component: 3000 - total flux cleaned = 0.00254996 Jy ! Component: 3050 - total flux cleaned = 0.00256672 Jy ! Component: 3100 - total flux cleaned = 0.00261705 Jy ! Component: 3150 - total flux cleaned = 0.00266706 Jy ! Component: 3200 - total flux cleaned = 0.00266704 Jy ! Component: 3250 - total flux cleaned = 0.00266692 Jy ! Component: 3300 - total flux cleaned = 0.0027804 Jy ! Component: 3350 - total flux cleaned = 0.00278045 Jy ! Component: 3400 - total flux cleaned = 0.00278063 Jy ! Component: 3450 - total flux cleaned = 0.00284363 Jy ! Component: 3500 - total flux cleaned = 0.00285937 Jy ! Component: 3550 - total flux cleaned = 0.00289051 Jy ! Component: 3600 - total flux cleaned = 0.0028443 Jy ! Component: 3650 - total flux cleaned = 0.00285965 Jy ! Component: 3700 - total flux cleaned = 0.00288987 Jy ! Component: 3750 - total flux cleaned = 0.00289004 Jy ! Component: 3800 - total flux cleaned = 0.00291987 Jy ! Component: 3850 - total flux cleaned = 0.00297913 Jy ! Component: 3900 - total flux cleaned = 0.00296433 Jy ! Component: 3950 - total flux cleaned = 0.00299357 Jy ! Component: 4000 - total flux cleaned = 0.00295006 Jy ! Component: 4050 - total flux cleaned = 0.00305086 Jy ! Total flux subtracted in 4096 components = 0.00299371 Jy ! Clean residual min=-0.000941 max=0.000730 Jy/beam ! Clean residual mean=-0.000000 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 1.24101 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 660 components and 1.24101 Jy ![Exited script file: muppet] wmap "J0632+1559_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.493 x 7.315 at -3.786 degrees (North through East) ! Clean map min=-0.0022129 max=0.56462 Jy/beam ! Writing clean map to FITS file: J0632+1559_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.564619 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000274285 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.145736 0.145736 0.291472 0.582945 1.16589 2.33178 4.66356 9.32712 18.6542 37.3085 74.6169 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.564 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.493 x 7.315 at -3.786 degrees (North through East) ! Clean map min=-0.0022129 max=0.56462 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0632+1559_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:34:06 2019