! Started logfile: J0629+1527_S_2017_03_23_pus_uvs.log on Mon May 13 09:51:26 2019 obs J0629+1527_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0629+1527_S_2017_03_23_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.897466 visibilities/baseline/integration-bin. ! Found source: J0629+1527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 18416 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0629+1527_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 483 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.983686Jy sigma=0.008596 ! Fit after self-cal, rms=0.949793Jy sigma=0.008316 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=6.298 mas, bpa=-3.538 degrees ! Estimated noise=935.524 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0402425 Jy ! Component: 100 - total flux cleaned = 0.0490571 Jy ! Total flux subtracted in 100 components = 0.0490571 Jy ! Clean residual min=-0.002892 max=0.003173 Jy/beam ! Clean residual mean=-0.000012 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.0490571 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0490571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081987Jy sigma=0.000668 ! Fit after self-cal, rms=0.081525Jy sigma=0.000664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=7.276 mas, bpa=-3.904 degrees ! Estimated noise=669.424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00411542 Jy ! Component: 100 - total flux cleaned = 0.00599697 Jy ! Component: 150 - total flux cleaned = 0.00710177 Jy ! Component: 200 - total flux cleaned = 0.00749385 Jy ! Total flux subtracted in 200 components = 0.00749385 Jy ! Clean residual min=-0.002373 max=0.002292 Jy/beam ! Clean residual mean=-0.000023 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0565509 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 32 components and 0.0565509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081280Jy sigma=0.000662 ! Fit after self-cal, rms=0.081262Jy sigma=0.000662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.98 KP 0.97 ! LA 1.06 MK 1.05 NL 0.93 OV 1.05 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.06 HN 1.00 KP 1.00 ! LA 0.96 MK 1.10 NL 1.11 OV 1.06 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.06 HN 1.10 KP 0.90 ! LA 0.75 MK 1.08 NL 1.09 OV 1.00 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 0.82 KP 1.00* ! LA 0.81 MK 0.87 NL 1.00* OV 1.04 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.081262Jy sigma=0.000662 ! Fit after self-cal, rms=0.078878Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=7.317 mas, bpa=-3.722 degrees ! Estimated noise=667.552 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139321 Jy ! Component: 100 - total flux cleaned = 0.000202606 Jy ! Component: 150 - total flux cleaned = 0.00024395 Jy ! Component: 200 - total flux cleaned = 0.000282118 Jy ! Total flux subtracted in 200 components = 0.000282118 Jy ! Clean residual min=-0.002165 max=0.002040 Jy/beam ! Clean residual mean=-0.000018 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.056833 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.056833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078871Jy sigma=0.000660 ! Fit after self-cal, rms=0.078794Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078794Jy sigma=0.000659 ! Fit after self-cal, rms=0.079230Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=7.321 mas, bpa=-4.091 degrees ! Estimated noise=667.366 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139341 Jy ! Component: 100 - total flux cleaned = -1.23325e-05 Jy ! Component: 150 - total flux cleaned = 5.63705e-05 Jy ! Component: 200 - total flux cleaned = 8.73719e-05 Jy ! Total flux subtracted in 200 components = 8.73719e-05 Jy ! Clean residual min=-0.001880 max=0.001805 Jy/beam ! Clean residual mean=-0.000018 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0569204 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0569204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079225Jy sigma=0.000658 ! Fit after self-cal, rms=0.079268Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132828 Jy ! Component: 100 - total flux cleaned = -0.000121431 Jy ! Component: 150 - total flux cleaned = -9.98454e-05 Jy ! Component: 200 - total flux cleaned = -6.9553e-05 Jy ! Total flux subtracted in 200 components = -6.9553e-05 Jy ! Clean residual min=-0.001879 max=0.001751 Jy/beam ! Clean residual mean=-0.000018 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0568509 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0568509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079264Jy sigma=0.000657 ! Fit after self-cal, rms=0.079266Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079266Jy sigma=0.000657 ! Fit after self-cal, rms=0.080074Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=7.318 mas, bpa=-4.332 degrees ! Estimated noise=668.104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.47461e-05 Jy ! Component: 100 - total flux cleaned = 8.46945e-05 Jy ! Component: 150 - total flux cleaned = 0.00016301 Jy ! Component: 200 - total flux cleaned = 0.000188676 Jy ! Total flux subtracted in 200 components = 0.000188676 Jy ! Clean residual min=-0.001758 max=0.001762 Jy/beam ! Clean residual mean=-0.000018 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0570395 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0570395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080070Jy sigma=0.000657 ! Fit after self-cal, rms=0.080112Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.66955e-05 Jy ! Component: 100 - total flux cleaned = -4.71487e-05 Jy ! Component: 150 - total flux cleaned = -2.05812e-05 Jy ! Component: 200 - total flux cleaned = -3.46666e-06 Jy ! Total flux subtracted in 200 components = -3.46666e-06 Jy ! Clean residual min=-0.001762 max=0.001761 Jy/beam ! Clean residual mean=-0.000018 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0570361 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0570361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080109Jy sigma=0.000657 ! Fit after self-cal, rms=0.080111Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080111Jy sigma=0.000657 ! Fit after self-cal, rms=0.080417Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.403 mas, bmaj=10.57 mas, bpa=-4.752 degrees ! Estimated noise=821.878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004063 Jy ! Component: 100 - total flux cleaned = 0.000416404 Jy ! Component: 150 - total flux cleaned = 0.000424267 Jy ! Component: 200 - total flux cleaned = 0.00043607 Jy ! Total flux subtracted in 200 components = 0.00043607 Jy ! Clean residual min=-0.001911 max=0.002150 Jy/beam ! Clean residual mean=-0.000035 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0574721 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.0574721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080417Jy sigma=0.000657 ! Fit after self-cal, rms=0.080427Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.01959e-05 Jy ! Component: 100 - total flux cleaned = 2.92128e-05 Jy ! Component: 150 - total flux cleaned = 3.54137e-05 Jy ! Component: 200 - total flux cleaned = 4.70635e-05 Jy ! Total flux subtracted in 200 components = 4.70635e-05 Jy ! Clean residual min=-0.001910 max=0.002167 Jy/beam ! Clean residual mean=-0.000035 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0575192 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.0575192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080427Jy sigma=0.000657 ! Fit after self-cal, rms=0.080428Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.597 mas, bmaj=7.31 mas, bpa=-4.434 degrees ! Estimated noise=669.015 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.597 x 7.31 at -4.434 degrees (North through East) ! Clean map min=-0.0016829 max=0.05341 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=6.326 mas, bpa=-4.619 degrees ! Estimated noise=932.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0407957 Jy ! Component: 100 - total flux cleaned = 0.0498904 Jy ! Component: 150 - total flux cleaned = 0.0522805 Jy ! Component: 200 - total flux cleaned = 0.0531611 Jy ! Total flux subtracted in 200 components = 0.0531611 Jy ! Clean residual min=-0.002346 max=0.002526 Jy/beam ! Clean residual mean=-0.000010 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.0531611 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0531611 Jy ! Inverting map and beam ! Estimated beam: bmin=3.597 mas, bmaj=7.31 mas, bpa=-4.434 degrees ! Estimated noise=669.015 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196638 Jy ! Component: 100 - total flux cleaned = 0.00258308 Jy ! Component: 150 - total flux cleaned = 0.00292777 Jy ! Component: 200 - total flux cleaned = 0.00322222 Jy ! Total flux subtracted in 200 components = 0.00322222 Jy ! Clean residual min=-0.001798 max=0.001737 Jy/beam ! Clean residual mean=-0.000019 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0563833 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 28 components and 0.0563833 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.403 mas, bmaj=10.57 mas, bpa=-4.752 degrees ! Estimated noise=821.878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000751069 Jy ! Component: 100 - total flux cleaned = 0.000972491 Jy ! Component: 150 - total flux cleaned = 0.0010149 Jy ! Component: 200 - total flux cleaned = 0.00104239 Jy ! Total flux subtracted in 200 components = 0.00104239 Jy ! Clean residual min=-0.001912 max=0.002175 Jy/beam ! Clean residual mean=-0.000035 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0574257 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.84694e-05 Jy ! Component: 100 - total flux cleaned = 3.57485e-05 Jy ! Component: 150 - total flux cleaned = 4.69783e-05 Jy ! Component: 200 - total flux cleaned = 6.25476e-05 Jy ! Total flux subtracted in 200 components = 6.25476e-05 Jy ! Clean residual min=-0.001904 max=0.002173 Jy/beam ! Clean residual mean=-0.000035 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0574882 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 0.0574882 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.597 mas, bmaj=7.31 mas, bpa=-4.434 degrees ! Estimated noise=669.015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186348 Jy ! Component: 100 - total flux cleaned = -0.000201426 Jy ! Component: 150 - total flux cleaned = -0.000201187 Jy ! Component: 200 - total flux cleaned = -0.000213549 Jy ! Total flux subtracted in 200 components = -0.000213549 Jy ! Clean residual min=-0.001761 max=0.001771 Jy/beam ! Clean residual mean=-0.000018 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0572747 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.0572747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080435Jy sigma=0.000657 ! Fit after self-cal, rms=0.080434Jy sigma=0.000657 wmodel J0629+1527_S_2017_03_23_pus_map.mod ! Writing 51 model components to file: J0629+1527_S_2017_03_23_pus_map.mod wobs J0629+1527_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0629+1527_S_2017_03_23_pus_uvs.fits wwins J0629+1527_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J0629+1527_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.59933e-05 Jy ! Component: 100 - total flux cleaned = 1.48076e-05 Jy ! Component: 150 - total flux cleaned = 1.50543e-05 Jy ! Component: 200 - total flux cleaned = -1.24819e-05 Jy ! Component: 250 - total flux cleaned = -0.000117021 Jy ! Component: 300 - total flux cleaned = -0.000167845 Jy ! Component: 350 - total flux cleaned = -0.000292323 Jy ! Component: 400 - total flux cleaned = -0.000462794 Jy ! Component: 450 - total flux cleaned = -0.000581614 Jy ! Component: 500 - total flux cleaned = -0.000675241 Jy ! Component: 550 - total flux cleaned = -0.000903762 Jy ! Component: 600 - total flux cleaned = -0.000993124 Jy ! Component: 650 - total flux cleaned = -0.00103705 Jy ! Component: 700 - total flux cleaned = -0.00112408 Jy ! Component: 750 - total flux cleaned = -0.00125185 Jy ! Component: 800 - total flux cleaned = -0.00125238 Jy ! Component: 850 - total flux cleaned = -0.00139726 Jy ! Component: 900 - total flux cleaned = -0.00139703 Jy ! Component: 950 - total flux cleaned = -0.00143727 Jy ! Component: 1000 - total flux cleaned = -0.00147693 Jy ! Component: 1050 - total flux cleaned = -0.00145787 Jy ! Component: 1100 - total flux cleaned = -0.00155404 Jy ! Component: 1150 - total flux cleaned = -0.00149724 Jy ! Component: 1200 - total flux cleaned = -0.00153441 Jy ! Component: 1250 - total flux cleaned = -0.00153435 Jy ! Component: 1300 - total flux cleaned = -0.00153423 Jy ! Component: 1350 - total flux cleaned = -0.00153418 Jy ! Component: 1400 - total flux cleaned = -0.00151675 Jy ! Component: 1450 - total flux cleaned = -0.00158718 Jy ! Component: 1500 - total flux cleaned = -0.00158732 Jy ! Component: 1550 - total flux cleaned = -0.00160473 Jy ! Component: 1600 - total flux cleaned = -0.00167264 Jy ! Component: 1650 - total flux cleaned = -0.0017063 Jy ! Component: 1700 - total flux cleaned = -0.00185521 Jy ! Component: 1750 - total flux cleaned = -0.0018881 Jy ! Component: 1800 - total flux cleaned = -0.00193682 Jy ! Component: 1850 - total flux cleaned = -0.00196899 Jy ! Component: 1900 - total flux cleaned = -0.00206441 Jy ! Component: 1950 - total flux cleaned = -0.00211114 Jy ! Component: 2000 - total flux cleaned = -0.00209578 Jy ! Component: 2050 - total flux cleaned = -0.00218817 Jy ! Component: 2100 - total flux cleaned = -0.00226435 Jy ! Component: 2150 - total flux cleaned = -0.00230938 Jy ! Component: 2200 - total flux cleaned = -0.00236897 Jy ! Component: 2250 - total flux cleaned = -0.00238378 Jy ! Component: 2300 - total flux cleaned = -0.00247206 Jy ! Component: 2350 - total flux cleaned = -0.00253043 Jy ! Component: 2400 - total flux cleaned = -0.00255933 Jy ! Component: 2450 - total flux cleaned = -0.00263087 Jy ! Component: 2500 - total flux cleaned = -0.00265925 Jy ! Component: 2550 - total flux cleaned = -0.00274354 Jy ! Component: 2600 - total flux cleaned = -0.00278533 Jy ! Component: 2650 - total flux cleaned = -0.00282663 Jy ! Component: 2700 - total flux cleaned = -0.00288142 Jy ! Component: 2750 - total flux cleaned = -0.00289512 Jy ! Component: 2800 - total flux cleaned = -0.003003 Jy ! Component: 2850 - total flux cleaned = -0.00301646 Jy ! Component: 2900 - total flux cleaned = -0.00306982 Jy ! Component: 2950 - total flux cleaned = -0.003149 Jy ! Component: 3000 - total flux cleaned = -0.00321455 Jy ! Component: 3050 - total flux cleaned = -0.00331844 Jy ! Component: 3100 - total flux cleaned = -0.00338284 Jy ! Component: 3150 - total flux cleaned = -0.00342141 Jy ! Component: 3200 - total flux cleaned = -0.00353579 Jy ! Component: 3250 - total flux cleaned = -0.00361147 Jy ! Component: 3300 - total flux cleaned = -0.00372433 Jy ! Component: 3350 - total flux cleaned = -0.00377407 Jy ! Component: 3400 - total flux cleaned = -0.00381124 Jy ! Component: 3450 - total flux cleaned = -0.00389714 Jy ! Component: 3500 - total flux cleaned = -0.00386043 Jy ! Component: 3550 - total flux cleaned = -0.00394531 Jy ! Component: 3600 - total flux cleaned = -0.00398138 Jy ! Component: 3650 - total flux cleaned = -0.00405316 Jy ! Component: 3700 - total flux cleaned = -0.00405314 Jy ! Component: 3750 - total flux cleaned = -0.00408856 Jy ! Component: 3800 - total flux cleaned = -0.00411207 Jy ! Component: 3850 - total flux cleaned = -0.00418187 Jy ! Component: 3900 - total flux cleaned = -0.00418182 Jy ! Component: 3950 - total flux cleaned = -0.00415881 Jy ! Component: 4000 - total flux cleaned = -0.00425039 Jy ! Component: 4050 - total flux cleaned = -0.00428461 Jy ! Total flux subtracted in 4096 components = -0.00434117 Jy ! Clean residual min=-0.000710 max=0.000702 Jy/beam ! Clean residual mean=-0.000006 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.0529335 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 349 components and 0.0529335 Jy ![Exited script file: muppet] wmap "J0629+1527_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.597 x 7.31 at -4.434 degrees (North through East) ! Clean map min=-0.001271 max=0.053367 Jy/beam ! Writing clean map to FITS file: J0629+1527_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0533665 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000208377 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17139 1.17139 2.34278 4.68557 9.37114 18.7423 37.4846 74.9691 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.597 x 7.31 at -4.434 degrees (North through East) ! Clean map min=-0.001271 max=0.053367 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0629+1527_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:51:33 2019