! Started logfile: J0628-2805_S_2017_08_12_pus_uvs.log on Fri May 10 14:54:23 2019 obs J0628-2805_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0628-2805_S_2017_08_12_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.967139 visibilities/baseline/integration-bin. ! Found source: J0628-2805 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 16364 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0628-2805_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 638 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.895432Jy sigma=0.006310 ! Fit after self-cal, rms=0.874127Jy sigma=0.006174 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.471 mas, bmaj=7.024 mas, bpa=-6.19 degrees ! Estimated noise=1604.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0990532 Jy ! Component: 100 - total flux cleaned = 0.122305 Jy ! Total flux subtracted in 100 components = 0.122305 Jy ! Clean residual min=-0.007962 max=0.013895 Jy/beam ! Clean residual mean=0.000018 rms=0.002340 Jy/beam ! Combined flux in latest and established models = 0.122305 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.122305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107075Jy sigma=0.000712 ! Fit after self-cal, rms=0.107041Jy sigma=0.000712 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.947 mas, bpa=-6.459 degrees ! Estimated noise=985.137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157426 Jy ! Component: 100 - total flux cleaned = 0.0235012 Jy ! Component: 150 - total flux cleaned = 0.0280931 Jy ! Component: 200 - total flux cleaned = 0.029961 Jy ! Total flux subtracted in 200 components = 0.029961 Jy ! Clean residual min=-0.005244 max=0.009404 Jy/beam ! Clean residual mean=0.000010 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.152266 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 39 components and 0.152266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105053Jy sigma=0.000694 ! Fit after self-cal, rms=0.104972Jy sigma=0.000692 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.11 KP 1.03 ! LA 0.96 MK 1.00 NL 0.95 OV 0.96 ! PT 0.99 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.20 KP 0.97 ! LA 0.95 MK 1.00 NL 1.09 OV 0.97 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.92 FD 0.97 HN 1.19 KP 0.99 ! LA 0.95 MK 0.99 NL 0.98 OV 0.88 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 4. ! A total of 174 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.95 KP 1.00* ! LA 1.00* MK 1.07 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.104972Jy sigma=0.000692 ! Fit after self-cal, rms=0.115647Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=7.901 mas, bpa=-5.395 degrees ! Estimated noise=992.487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177444 Jy ! Component: 100 - total flux cleaned = -0.00196464 Jy ! Component: 150 - total flux cleaned = -0.00196563 Jy ! Component: 200 - total flux cleaned = -0.00189303 Jy ! Total flux subtracted in 200 components = -0.00189303 Jy ! Clean residual min=-0.003518 max=0.003843 Jy/beam ! Clean residual mean=0.000014 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.150373 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.150373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115603Jy sigma=0.000678 ! Fit after self-cal, rms=0.115999Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115999Jy sigma=0.000678 ! Fit after self-cal, rms=0.125738Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=7.897 mas, bpa=-5.504 degrees ! Estimated noise=993.993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000676531 Jy ! Component: 100 - total flux cleaned = -0.000763218 Jy ! Component: 150 - total flux cleaned = -0.000763533 Jy ! Component: 200 - total flux cleaned = -0.000797364 Jy ! Total flux subtracted in 200 components = -0.000797364 Jy ! Clean residual min=-0.002782 max=0.002997 Jy/beam ! Clean residual mean=0.000006 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.149575 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.149575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125695Jy sigma=0.000674 ! Fit after self-cal, rms=0.125866Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166087 Jy ! Component: 100 - total flux cleaned = 0.00172753 Jy ! Component: 150 - total flux cleaned = 0.00154958 Jy ! Component: 200 - total flux cleaned = 0.00151029 Jy ! Total flux subtracted in 200 components = 0.00151029 Jy ! Clean residual min=-0.002528 max=0.002367 Jy/beam ! Clean residual mean=0.000008 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.151086 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.151086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125793Jy sigma=0.000674 ! Fit after self-cal, rms=0.125796Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125796Jy sigma=0.000674 ! Fit after self-cal, rms=0.126927Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=7.906 mas, bpa=-5.503 degrees ! Estimated noise=992.825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194069 Jy ! Component: 100 - total flux cleaned = 0.000119623 Jy ! Component: 150 - total flux cleaned = 5.03982e-05 Jy ! Component: 200 - total flux cleaned = -1.38858e-05 Jy ! Total flux subtracted in 200 components = -1.38858e-05 Jy ! Clean residual min=-0.002362 max=0.002327 Jy/beam ! Clean residual mean=0.000008 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.151072 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.151072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126896Jy sigma=0.000673 ! Fit after self-cal, rms=0.126905Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.1921e-05 Jy ! Component: 100 - total flux cleaned = -3.80615e-05 Jy ! Component: 150 - total flux cleaned = -6.58501e-05 Jy ! Component: 200 - total flux cleaned = -6.58317e-05 Jy ! Total flux subtracted in 200 components = -6.58317e-05 Jy ! Clean residual min=-0.002328 max=0.002313 Jy/beam ! Clean residual mean=0.000008 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.151006 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.151006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126886Jy sigma=0.000673 ! Fit after self-cal, rms=0.126884Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126884Jy sigma=0.000673 ! Fit after self-cal, rms=0.127259Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.712 mas, bmaj=20.3 mas, bpa=-1.758 degrees ! Estimated noise=1264.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000318542 Jy ! Component: 100 - total flux cleaned = -0.000395758 Jy ! Component: 150 - total flux cleaned = -0.00037629 Jy ! Component: 200 - total flux cleaned = -0.000322133 Jy ! Total flux subtracted in 200 components = -0.000322133 Jy ! Clean residual min=-0.002034 max=0.002447 Jy/beam ! Clean residual mean=0.000018 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.150684 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 107 components and 0.150684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127250Jy sigma=0.000673 ! Fit after self-cal, rms=0.127252Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116322 Jy ! Component: 100 - total flux cleaned = -6.39099e-05 Jy ! Component: 150 - total flux cleaned = 7.81369e-07 Jy ! Component: 200 - total flux cleaned = 4.62652e-05 Jy ! Total flux subtracted in 200 components = 4.62652e-05 Jy ! Clean residual min=-0.002012 max=0.002444 Jy/beam ! Clean residual mean=0.000018 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.15073 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 108 components and 0.15073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127246Jy sigma=0.000673 ! Fit after self-cal, rms=0.127245Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.914 mas, bpa=-5.463 degrees ! Estimated noise=991.608 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 7.914 at -5.463 degrees (North through East) ! Clean map min=-0.0021745 max=0.12615 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.452 mas, bmaj=6.918 mas, bpa=-5.37 degrees ! Estimated noise=1656.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101257 Jy ! Component: 100 - total flux cleaned = 0.125391 Jy ! Component: 150 - total flux cleaned = 0.134827 Jy ! Component: 200 - total flux cleaned = 0.139153 Jy ! Total flux subtracted in 200 components = 0.139153 Jy ! Clean residual min=-0.004740 max=0.004980 Jy/beam ! Clean residual mean=0.000003 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.139153 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.139153 Jy ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.914 mas, bpa=-5.463 degrees ! Estimated noise=991.608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00542105 Jy ! Component: 100 - total flux cleaned = 0.00816743 Jy ! Component: 150 - total flux cleaned = 0.00919657 Jy ! Component: 200 - total flux cleaned = 0.0098316 Jy ! Total flux subtracted in 200 components = 0.0098316 Jy ! Clean residual min=-0.002767 max=0.002555 Jy/beam ! Clean residual mean=0.000005 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.148985 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 64 components and 0.148985 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.712 mas, bmaj=20.3 mas, bpa=-1.758 degrees ! Estimated noise=1264.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000728496 Jy ! Component: 100 - total flux cleaned = 0.000992726 Jy ! Component: 150 - total flux cleaned = 0.00123319 Jy ! Component: 200 - total flux cleaned = 0.00137938 Jy ! Total flux subtracted in 200 components = 0.00137938 Jy ! Clean residual min=-0.002192 max=0.002519 Jy/beam ! Clean residual mean=0.000017 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.150364 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108488 Jy ! Component: 100 - total flux cleaned = 0.000207196 Jy ! Component: 150 - total flux cleaned = 0.000296767 Jy ! Component: 200 - total flux cleaned = 0.000378338 Jy ! Total flux subtracted in 200 components = 0.000378338 Jy ! Clean residual min=-0.002173 max=0.002527 Jy/beam ! Clean residual mean=0.000018 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.150742 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 97 components and 0.150742 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.914 mas, bpa=-5.463 degrees ! Estimated noise=991.608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68753e-05 Jy ! Component: 100 - total flux cleaned = 4.67007e-05 Jy ! Component: 150 - total flux cleaned = 4.55297e-05 Jy ! Component: 200 - total flux cleaned = 7.82073e-05 Jy ! Total flux subtracted in 200 components = 7.82073e-05 Jy ! Clean residual min=-0.002432 max=0.002391 Jy/beam ! Clean residual mean=0.000008 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.15082 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 110 components and 0.15082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127242Jy sigma=0.000673 ! Fit after self-cal, rms=0.127241Jy sigma=0.000673 wmodel J0628-2805_S_2017_08_12_pus_map.mod ! Writing 110 model components to file: J0628-2805_S_2017_08_12_pus_map.mod wobs J0628-2805_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0628-2805_S_2017_08_12_pus_uvs.fits wwins J0628-2805_S_2017_08_12_pus_map.win ! wwins: Wrote 3 windows to J0628-2805_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127211 Jy ! Component: 100 - total flux cleaned = 0.000414389 Jy ! Component: 150 - total flux cleaned = 0.0006433 Jy ! Component: 200 - total flux cleaned = 0.000969355 Jy ! Component: 250 - total flux cleaned = 0.00121178 Jy ! Component: 300 - total flux cleaned = 0.00131062 Jy ! Component: 350 - total flux cleaned = 0.00134253 Jy ! Component: 400 - total flux cleaned = 0.00131161 Jy ! Component: 450 - total flux cleaned = 0.00137214 Jy ! Component: 500 - total flux cleaned = 0.00154911 Jy ! Component: 550 - total flux cleaned = 0.00169391 Jy ! Component: 600 - total flux cleaned = 0.00186401 Jy ! Component: 650 - total flux cleaned = 0.00194687 Jy ! Component: 700 - total flux cleaned = 0.00210964 Jy ! Component: 750 - total flux cleaned = 0.00218971 Jy ! Component: 800 - total flux cleaned = 0.0022947 Jy ! Component: 850 - total flux cleaned = 0.00242379 Jy ! Component: 900 - total flux cleaned = 0.00247417 Jy ! Component: 950 - total flux cleaned = 0.00252423 Jy ! Component: 1000 - total flux cleaned = 0.00254883 Jy ! Component: 1050 - total flux cleaned = 0.00262142 Jy ! Component: 1100 - total flux cleaned = 0.00269284 Jy ! Component: 1150 - total flux cleaned = 0.0027398 Jy ! Component: 1200 - total flux cleaned = 0.00283214 Jy ! Component: 1250 - total flux cleaned = 0.00296801 Jy ! Component: 1300 - total flux cleaned = 0.00299039 Jy ! Component: 1350 - total flux cleaned = 0.00312227 Jy ! Component: 1400 - total flux cleaned = 0.00307913 Jy ! Component: 1450 - total flux cleaned = 0.00320703 Jy ! Component: 1500 - total flux cleaned = 0.00324904 Jy ! Component: 1550 - total flux cleaned = 0.0033323 Jy ! Component: 1600 - total flux cleaned = 0.00345577 Jy ! Component: 1650 - total flux cleaned = 0.00349613 Jy ! Component: 1700 - total flux cleaned = 0.00355649 Jy ! Component: 1750 - total flux cleaned = 0.0036559 Jy ! Component: 1800 - total flux cleaned = 0.0037149 Jy ! Component: 1850 - total flux cleaned = 0.0037924 Jy ! Component: 1900 - total flux cleaned = 0.00388802 Jy ! Component: 1950 - total flux cleaned = 0.00388788 Jy ! Component: 2000 - total flux cleaned = 0.0040385 Jy ! Component: 2050 - total flux cleaned = 0.00403843 Jy ! Component: 2100 - total flux cleaned = 0.00416802 Jy ! Component: 2150 - total flux cleaned = 0.0042411 Jy ! Component: 2200 - total flux cleaned = 0.00429581 Jy ! Component: 2250 - total flux cleaned = 0.00443984 Jy ! Component: 2300 - total flux cleaned = 0.00449353 Jy ! Component: 2350 - total flux cleaned = 0.00451108 Jy ! Component: 2400 - total flux cleaned = 0.00456384 Jy ! Component: 2450 - total flux cleaned = 0.00459876 Jy ! Component: 2500 - total flux cleaned = 0.00470226 Jy ! Component: 2550 - total flux cleaned = 0.00480483 Jy ! Component: 2600 - total flux cleaned = 0.00492367 Jy ! Component: 2650 - total flux cleaned = 0.00490672 Jy ! Component: 2700 - total flux cleaned = 0.00499034 Jy ! Component: 2750 - total flux cleaned = 0.0049737 Jy ! Component: 2800 - total flux cleaned = 0.00507268 Jy ! Component: 2850 - total flux cleaned = 0.00513827 Jy ! Component: 2900 - total flux cleaned = 0.0052033 Jy ! Component: 2950 - total flux cleaned = 0.005284 Jy ! Component: 3000 - total flux cleaned = 0.0052679 Jy ! Component: 3050 - total flux cleaned = 0.0053636 Jy ! Component: 3100 - total flux cleaned = 0.00539521 Jy ! Component: 3150 - total flux cleaned = 0.00545799 Jy ! Component: 3200 - total flux cleaned = 0.0054894 Jy ! Component: 3250 - total flux cleaned = 0.00556701 Jy ! Component: 3300 - total flux cleaned = 0.00559779 Jy ! Component: 3350 - total flux cleaned = 0.00565905 Jy ! Component: 3400 - total flux cleaned = 0.00568938 Jy ! Component: 3450 - total flux cleaned = 0.00574975 Jy ! Component: 3500 - total flux cleaned = 0.00579475 Jy ! Component: 3550 - total flux cleaned = 0.00574993 Jy ! Component: 3600 - total flux cleaned = 0.00586872 Jy ! Component: 3650 - total flux cleaned = 0.00588333 Jy ! Component: 3700 - total flux cleaned = 0.00586868 Jy ! Component: 3750 - total flux cleaned = 0.00591247 Jy ! Component: 3800 - total flux cleaned = 0.00588345 Jy ! Component: 3850 - total flux cleaned = 0.00595568 Jy ! Component: 3900 - total flux cleaned = 0.00596995 Jy ! Component: 3950 - total flux cleaned = 0.00594133 Jy ! Component: 4000 - total flux cleaned = 0.00598408 Jy ! Component: 4050 - total flux cleaned = 0.00604039 Jy ! Total flux subtracted in 4096 components = 0.0059703 Jy ! Clean residual min=-0.000828 max=0.000823 Jy/beam ! Clean residual mean=0.000004 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.156791 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 367 components and 0.156791 Jy ![Exited script file: muppet] wmap "J0628-2805_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 7.914 at -5.463 degrees (North through East) ! Clean map min=-0.0019433 max=0.12804 Jy/beam ! Writing clean map to FITS file: J0628-2805_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.128042 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000253634 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.594259 0.594259 1.18852 2.37703 4.75407 9.50814 19.0163 38.0326 76.0651 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.128 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 7.914 at -5.463 degrees (North through East) ! Clean map min=-0.0019433 max=0.12804 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0628-2805_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:54:27 2019