! Started logfile: J0627-3529_S_2017_01_21_pus_uvs.log on Sun May 5 15:47:43 2019 obs J0627-3529_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0627-3529_S_2017_01_21_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.562865 visibilities/baseline/integration-bin. ! Found source: J0627-3529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 6160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0627-3529_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 341 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.766426Jy sigma=0.004283 ! Fit after self-cal, rms=0.752419Jy sigma=0.004208 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.586 mas, bmaj=8.119 mas, bpa=7.391 degrees ! Estimated noise=2964.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195644 Jy ! Component: 100 - total flux cleaned = 0.246535 Jy ! Total flux subtracted in 100 components = 0.246535 Jy ! Clean residual min=-0.018454 max=0.028093 Jy/beam ! Clean residual mean=-0.000267 rms=0.005378 Jy/beam ! Combined flux in latest and established models = 0.246535 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.246535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146727Jy sigma=0.000767 ! Fit after self-cal, rms=0.146620Jy sigma=0.000766 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=9.66 mas, bpa=6.864 degrees ! Estimated noise=1799.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371384 Jy ! Component: 100 - total flux cleaned = 0.0564612 Jy ! Component: 150 - total flux cleaned = 0.0673041 Jy ! Component: 200 - total flux cleaned = 0.0734162 Jy ! Total flux subtracted in 200 components = 0.0734162 Jy ! Clean residual min=-0.015434 max=0.019858 Jy/beam ! Clean residual mean=-0.000120 rms=0.005098 Jy/beam ! Combined flux in latest and established models = 0.319952 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.319952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139319Jy sigma=0.000697 ! Fit after self-cal, rms=0.139369Jy sigma=0.000697 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.39 LA 0.99 ! MK 0.94 NL 1.06 OV 1.01 PT 0.94 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00 HN 1.33 LA 0.95 ! MK 0.98 NL 1.06 OV 1.07 PT 0.91 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 1.33 LA 0.94 ! MK 1.04 NL 1.07 OV 0.94 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.03 HN 1.24 LA 0.96 ! MK 0.89 NL 1.00* OV 0.97 PT 0.94 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.139369Jy sigma=0.000697 ! Fit after self-cal, rms=0.147074Jy sigma=0.000679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=9.627 mas, bpa=7.171 degrees ! Estimated noise=1798.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000634424 Jy ! Component: 100 - total flux cleaned = -0.00100912 Jy ! Component: 150 - total flux cleaned = -0.00131382 Jy ! Component: 200 - total flux cleaned = -0.00149799 Jy ! Total flux subtracted in 200 components = -0.00149799 Jy ! Clean residual min=-0.012437 max=0.015681 Jy/beam ! Clean residual mean=0.000063 rms=0.004035 Jy/beam ! Combined flux in latest and established models = 0.318454 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.318454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146795Jy sigma=0.000678 ! Fit after self-cal, rms=0.147262Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147262Jy sigma=0.000677 ! Fit after self-cal, rms=0.148080Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=9.697 mas, bpa=7.161 degrees ! Estimated noise=1796.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000530479 Jy ! Component: 100 - total flux cleaned = -0.000546419 Jy ! Component: 150 - total flux cleaned = -0.000685123 Jy ! Component: 200 - total flux cleaned = -0.000744025 Jy ! Total flux subtracted in 200 components = -0.000744025 Jy ! Clean residual min=-0.011673 max=0.013960 Jy/beam ! Clean residual mean=-0.000096 rms=0.003532 Jy/beam ! Combined flux in latest and established models = 0.31771 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.31771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147926Jy sigma=0.000668 ! Fit after self-cal, rms=0.147934Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.52376e-05 Jy ! Component: 100 - total flux cleaned = -0.000225206 Jy ! Component: 150 - total flux cleaned = -0.000228502 Jy ! Component: 200 - total flux cleaned = -0.000276452 Jy ! Total flux subtracted in 200 components = -0.000276452 Jy ! Clean residual min=-0.011671 max=0.013791 Jy/beam ! Clean residual mean=-0.000097 rms=0.003528 Jy/beam ! Combined flux in latest and established models = 0.317433 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.317433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147856Jy sigma=0.000668 ! Fit after self-cal, rms=0.147873Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147873Jy sigma=0.000668 ! Fit after self-cal, rms=0.148234Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=9.735 mas, bpa=7.127 degrees ! Estimated noise=1795.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000605094 Jy ! Component: 100 - total flux cleaned = -0.000716757 Jy ! Component: 150 - total flux cleaned = -0.000806923 Jy ! Component: 200 - total flux cleaned = -0.000807639 Jy ! Total flux subtracted in 200 components = -0.000807639 Jy ! Clean residual min=-0.011703 max=0.013683 Jy/beam ! Clean residual mean=-0.000108 rms=0.003514 Jy/beam ! Combined flux in latest and established models = 0.316626 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.316626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148167Jy sigma=0.000667 ! Fit after self-cal, rms=0.148192Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.52668e-06 Jy ! Component: 100 - total flux cleaned = -5.03657e-05 Jy ! Component: 150 - total flux cleaned = -8.81847e-05 Jy ! Component: 200 - total flux cleaned = -8.7306e-05 Jy ! Total flux subtracted in 200 components = -8.7306e-05 Jy ! Clean residual min=-0.011679 max=0.013627 Jy/beam ! Clean residual mean=-0.000108 rms=0.003510 Jy/beam ! Combined flux in latest and established models = 0.316538 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.316538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148150Jy sigma=0.000667 ! Fit after self-cal, rms=0.148165Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148165Jy sigma=0.000667 ! Fit after self-cal, rms=0.148369Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.792 mas, bmaj=23.36 mas, bpa=1.36 degrees ! Estimated noise=2178.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624413 Jy ! Component: 100 - total flux cleaned = 0.000627872 Jy ! Component: 150 - total flux cleaned = 0.000633103 Jy ! Component: 200 - total flux cleaned = 0.000635382 Jy ! Total flux subtracted in 200 components = 0.000635382 Jy ! Clean residual min=-0.019235 max=0.018400 Jy/beam ! Clean residual mean=-0.000199 rms=0.006120 Jy/beam ! Combined flux in latest and established models = 0.317174 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 56 components and 0.317174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148406Jy sigma=0.000668 ! Fit after self-cal, rms=0.148312Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001612 Jy ! Component: 100 - total flux cleaned = -0.000163582 Jy ! Component: 150 - total flux cleaned = -0.000167807 Jy ! Component: 200 - total flux cleaned = -0.000229088 Jy ! Total flux subtracted in 200 components = -0.000229088 Jy ! Clean residual min=-0.019192 max=0.018285 Jy/beam ! Clean residual mean=-0.000201 rms=0.006121 Jy/beam ! Combined flux in latest and established models = 0.316945 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 57 components and 0.316945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148399Jy sigma=0.000668 ! Fit after self-cal, rms=0.148322Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=9.756 mas, bpa=7.113 degrees ! Estimated noise=1793.28 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 9.756 at 7.113 degrees (North through East) ! Clean map min=-0.01157 max=0.24862 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=8.154 mas, bpa=7.545 degrees ! Estimated noise=2989.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197101 Jy ! Component: 100 - total flux cleaned = 0.252219 Jy ! Component: 150 - total flux cleaned = 0.277269 Jy ! Component: 200 - total flux cleaned = 0.290916 Jy ! Total flux subtracted in 200 components = 0.290916 Jy ! Clean residual min=-0.011652 max=0.013040 Jy/beam ! Clean residual mean=-0.000128 rms=0.003102 Jy/beam ! Combined flux in latest and established models = 0.290916 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.290916 Jy ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=9.756 mas, bpa=7.113 degrees ! Estimated noise=1793.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121553 Jy ! Component: 100 - total flux cleaned = 0.0176768 Jy ! Component: 150 - total flux cleaned = 0.0189973 Jy ! Component: 200 - total flux cleaned = 0.0196047 Jy ! Total flux subtracted in 200 components = 0.0196047 Jy ! Clean residual min=-0.012290 max=0.013638 Jy/beam ! Clean residual mean=-0.000137 rms=0.003598 Jy/beam ! Combined flux in latest and established models = 0.310521 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 0.310521 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.792 mas, bmaj=23.36 mas, bpa=1.36 degrees ! Estimated noise=2178.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039177 Jy ! Component: 100 - total flux cleaned = 0.00393286 Jy ! Component: 150 - total flux cleaned = 0.00393959 Jy ! Component: 200 - total flux cleaned = 0.00394298 Jy ! Total flux subtracted in 200 components = 0.00394298 Jy ! Clean residual min=-0.019717 max=0.018160 Jy/beam ! Clean residual mean=-0.000226 rms=0.006187 Jy/beam ! Combined flux in latest and established models = 0.314464 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.77161e-06 Jy ! Component: 100 - total flux cleaned = 4.65213e-06 Jy ! Component: 150 - total flux cleaned = 5.00222e-05 Jy ! Component: 200 - total flux cleaned = 9.07777e-05 Jy ! Total flux subtracted in 200 components = 9.07777e-05 Jy ! Clean residual min=-0.019671 max=0.018117 Jy/beam ! Clean residual mean=-0.000225 rms=0.006172 Jy/beam ! Combined flux in latest and established models = 0.314555 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.314555 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=9.756 mas, bpa=7.113 degrees ! Estimated noise=1793.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00221732 Jy ! Component: 100 - total flux cleaned = -0.00193325 Jy ! Component: 150 - total flux cleaned = -0.0019319 Jy ! Component: 200 - total flux cleaned = -0.00201417 Jy ! Total flux subtracted in 200 components = -0.00201417 Jy ! Clean residual min=-0.012006 max=0.013625 Jy/beam ! Clean residual mean=-0.000125 rms=0.003546 Jy/beam ! Combined flux in latest and established models = 0.31254 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.31254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148418Jy sigma=0.000667 ! Fit after self-cal, rms=0.148422Jy sigma=0.000667 wmodel J0627-3529_S_2017_01_21_pus_map.mod ! Writing 52 model components to file: J0627-3529_S_2017_01_21_pus_map.mod wobs J0627-3529_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0627-3529_S_2017_01_21_pus_uvs.fits wwins J0627-3529_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0627-3529_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417781 Jy ! Component: 100 - total flux cleaned = 0.00519556 Jy ! Component: 150 - total flux cleaned = 0.0055745 Jy ! Component: 200 - total flux cleaned = 0.00574928 Jy ! Component: 250 - total flux cleaned = 0.0057548 Jy ! Component: 300 - total flux cleaned = 0.00589782 Jy ! Component: 350 - total flux cleaned = 0.00602632 Jy ! Component: 400 - total flux cleaned = 0.00614781 Jy ! Component: 450 - total flux cleaned = 0.00613626 Jy ! Component: 500 - total flux cleaned = 0.00591133 Jy ! Component: 550 - total flux cleaned = 0.00580591 Jy ! Component: 600 - total flux cleaned = 0.00590327 Jy ! Component: 650 - total flux cleaned = 0.00599319 Jy ! Component: 700 - total flux cleaned = 0.00625849 Jy ! Component: 750 - total flux cleaned = 0.00677058 Jy ! Component: 800 - total flux cleaned = 0.00741972 Jy ! Component: 850 - total flux cleaned = 0.00773077 Jy ! Component: 900 - total flux cleaned = 0.00825777 Jy ! Component: 950 - total flux cleaned = 0.00869209 Jy ! Component: 1000 - total flux cleaned = 0.00869021 Jy ! Component: 1050 - total flux cleaned = 0.00855666 Jy ! Component: 1100 - total flux cleaned = 0.00868885 Jy ! Component: 1150 - total flux cleaned = 0.00875161 Jy ! Component: 1200 - total flux cleaned = 0.00875038 Jy ! Component: 1250 - total flux cleaned = 0.00857135 Jy ! Component: 1300 - total flux cleaned = 0.00880257 Jy ! Component: 1350 - total flux cleaned = 0.00880073 Jy ! Component: 1400 - total flux cleaned = 0.00874694 Jy ! Component: 1450 - total flux cleaned = 0.00880067 Jy ! Component: 1500 - total flux cleaned = 0.00864443 Jy ! Component: 1550 - total flux cleaned = 0.00864529 Jy ! Component: 1600 - total flux cleaned = 0.00864519 Jy ! Component: 1650 - total flux cleaned = 0.00854904 Jy ! Component: 1700 - total flux cleaned = 0.0085972 Jy ! Component: 1750 - total flux cleaned = 0.00845827 Jy ! Component: 1800 - total flux cleaned = 0.00836778 Jy ! Component: 1850 - total flux cleaned = 0.00836832 Jy ! Component: 1900 - total flux cleaned = 0.00832489 Jy ! Component: 1950 - total flux cleaned = 0.00832409 Jy ! Component: 2000 - total flux cleaned = 0.00824015 Jy ! Component: 2050 - total flux cleaned = 0.00823914 Jy ! Component: 2100 - total flux cleaned = 0.00807719 Jy ! Component: 2150 - total flux cleaned = 0.00799747 Jy ! Component: 2200 - total flux cleaned = 0.00788004 Jy ! Component: 2250 - total flux cleaned = 0.00776426 Jy ! Component: 2300 - total flux cleaned = 0.00765171 Jy ! Component: 2350 - total flux cleaned = 0.00750411 Jy ! Component: 2400 - total flux cleaned = 0.00754041 Jy ! Component: 2450 - total flux cleaned = 0.00750419 Jy ! Component: 2500 - total flux cleaned = 0.00746867 Jy ! Component: 2550 - total flux cleaned = 0.00743376 Jy ! Component: 2600 - total flux cleaned = 0.00736474 Jy ! Component: 2650 - total flux cleaned = 0.00733079 Jy ! Component: 2700 - total flux cleaned = 0.00739822 Jy ! Component: 2750 - total flux cleaned = 0.0073976 Jy ! Component: 2800 - total flux cleaned = 0.00736444 Jy ! Component: 2850 - total flux cleaned = 0.00742979 Jy ! Component: 2900 - total flux cleaned = 0.00749422 Jy ! Component: 2950 - total flux cleaned = 0.00755799 Jy ! Component: 3000 - total flux cleaned = 0.00758977 Jy ! Component: 3050 - total flux cleaned = 0.00765309 Jy ! Component: 3100 - total flux cleaned = 0.00777831 Jy ! Component: 3150 - total flux cleaned = 0.00784028 Jy ! Component: 3200 - total flux cleaned = 0.007933 Jy ! Component: 3250 - total flux cleaned = 0.00805585 Jy ! Component: 3300 - total flux cleaned = 0.00805589 Jy ! Component: 3350 - total flux cleaned = 0.00823822 Jy ! Component: 3400 - total flux cleaned = 0.00829819 Jy ! Component: 3450 - total flux cleaned = 0.00835823 Jy ! Component: 3500 - total flux cleaned = 0.00844767 Jy ! Component: 3550 - total flux cleaned = 0.00850713 Jy ! Component: 3600 - total flux cleaned = 0.00850723 Jy ! Component: 3650 - total flux cleaned = 0.00859543 Jy ! Component: 3700 - total flux cleaned = 0.00868319 Jy ! Component: 3750 - total flux cleaned = 0.00877043 Jy ! Component: 3800 - total flux cleaned = 0.0087704 Jy ! Component: 3850 - total flux cleaned = 0.00885689 Jy ! Component: 3900 - total flux cleaned = 0.00894326 Jy ! Component: 3950 - total flux cleaned = 0.00908663 Jy ! Component: 4000 - total flux cleaned = 0.00914386 Jy ! Component: 4050 - total flux cleaned = 0.00917256 Jy ! Total flux subtracted in 4096 components = 0.00922966 Jy ! Clean residual min=-0.001651 max=0.001650 Jy/beam ! Clean residual mean=0.000019 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.32177 Jy keep ! Adding 357 model components to the UV plane model. ! The established model now contains 409 components and 0.32177 Jy ![Exited script file: muppet] wmap "J0627-3529_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 9.756 at 7.113 degrees (North through East) ! Clean map min=-0.004596 max=0.25219 Jy/beam ! Writing clean map to FITS file: J0627-3529_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.252187 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000476316 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.566622 0.566622 1.13324 2.26649 4.53298 9.06595 18.1319 36.2638 72.5276 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.252 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 9.756 at 7.113 degrees (North through East) ! Clean map min=-0.004596 max=0.25219 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0627-3529_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:47:48 2019