! Started logfile: J0626-1512_S_2017_10_21_pus_uvs.log on Sat May 11 20:52:28 2019 obs J0626-1512_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0626-1512_S_2017_10_21_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.662835 visibilities/baseline/integration-bin. ! Found source: J0626-1512 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 11072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0626-1512_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 702 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.895231Jy sigma=0.007948 ! Fit after self-cal, rms=0.883627Jy sigma=0.007856 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=29.2 mas, bpa=-13.12 degrees ! Estimated noise=1544.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0896376 Jy ! Component: 100 - total flux cleaned = 0.112257 Jy ! Total flux subtracted in 100 components = 0.112257 Jy ! Clean residual min=-0.007451 max=0.010201 Jy/beam ! Clean residual mean=-0.000038 rms=0.002291 Jy/beam ! Combined flux in latest and established models = 0.112257 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.112257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093184Jy sigma=0.000746 ! Fit after self-cal, rms=0.093109Jy sigma=0.000746 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=27.62 mas, bpa=-13.08 degrees ! Estimated noise=870.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137668 Jy ! Component: 100 - total flux cleaned = 0.0206478 Jy ! Component: 150 - total flux cleaned = 0.0246536 Jy ! Component: 200 - total flux cleaned = 0.0271128 Jy ! Total flux subtracted in 200 components = 0.0271128 Jy ! Clean residual min=-0.003830 max=0.004219 Jy/beam ! Clean residual mean=-0.000005 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.13937 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 54 components and 0.13937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091062Jy sigma=0.000728 ! Fit after self-cal, rms=0.091031Jy sigma=0.000728 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.06 KP 1.09 ! LA 1.01 MK 0.98 NL 0.91 OV 1.02 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.05 KP 1.04 ! LA 0.95 MK 1.04 NL 1.07 OV 1.03 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.97 KP 1.06 ! LA 0.77 MK 1.02 NL 1.21 OV 0.96 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.97 KP 1.00* ! LA 1.01 MK 1.00* NL 1.00* OV 1.00* ! PT 0.83 ! ! ! Fit before self-cal, rms=0.091031Jy sigma=0.000728 ! Fit after self-cal, rms=0.088010Jy sigma=0.000719 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.856 mas, bmaj=27.64 mas, bpa=-13.05 degrees ! Estimated noise=874.531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153136 Jy ! Component: 100 - total flux cleaned = -0.00168063 Jy ! Component: 150 - total flux cleaned = -0.00178044 Jy ! Component: 200 - total flux cleaned = -0.00183774 Jy ! Total flux subtracted in 200 components = -0.00183774 Jy ! Clean residual min=-0.002555 max=0.002755 Jy/beam ! Clean residual mean=-0.000005 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.137532 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 87 components and 0.137532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087961Jy sigma=0.000719 ! Fit after self-cal, rms=0.088040Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088040Jy sigma=0.000719 ! Fit after self-cal, rms=0.088143Jy sigma=0.000717 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=27.65 mas, bpa=-13.07 degrees ! Estimated noise=873.054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00044038 Jy ! Component: 100 - total flux cleaned = -0.000779438 Jy ! Component: 150 - total flux cleaned = -0.00111333 Jy ! Component: 200 - total flux cleaned = -0.00135658 Jy ! Total flux subtracted in 200 components = -0.00135658 Jy ! Clean residual min=-0.002249 max=0.002173 Jy/beam ! Clean residual mean=-0.000003 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.136175 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 105 components and 0.136175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088116Jy sigma=0.000717 ! Fit after self-cal, rms=0.088254Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134943 Jy ! Component: 100 - total flux cleaned = -0.00025223 Jy ! Component: 150 - total flux cleaned = -0.00037369 Jy ! Component: 200 - total flux cleaned = -0.000447555 Jy ! Total flux subtracted in 200 components = -0.000447555 Jy ! Clean residual min=-0.002167 max=0.002082 Jy/beam ! Clean residual mean=-0.000003 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.135728 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 124 components and 0.135728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088240Jy sigma=0.000717 ! Fit after self-cal, rms=0.088233Jy sigma=0.000717 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088233Jy sigma=0.000717 ! Fit after self-cal, rms=0.089313Jy sigma=0.000717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=27.65 mas, bpa=-13.07 degrees ! Estimated noise=873.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000325244 Jy ! Component: 100 - total flux cleaned = -0.000562663 Jy ! Component: 150 - total flux cleaned = -0.000780602 Jy ! Component: 200 - total flux cleaned = -0.000903589 Jy ! Total flux subtracted in 200 components = -0.000903589 Jy ! Clean residual min=-0.002110 max=0.002119 Jy/beam ! Clean residual mean=-0.000003 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.134824 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 141 components and 0.134824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089302Jy sigma=0.000716 ! Fit after self-cal, rms=0.089455Jy sigma=0.000716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.39176e-05 Jy ! Component: 100 - total flux cleaned = -0.000127095 Jy ! Component: 150 - total flux cleaned = -0.0002074 Jy ! Component: 200 - total flux cleaned = -0.000298 Jy ! Total flux subtracted in 200 components = -0.000298 Jy ! Clean residual min=-0.002072 max=0.002061 Jy/beam ! Clean residual mean=-0.000003 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.134526 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 150 components and 0.134526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089448Jy sigma=0.000716 ! Fit after self-cal, rms=0.089445Jy sigma=0.000716 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089445Jy sigma=0.000716 ! Fit after self-cal, rms=0.091553Jy sigma=0.000716 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.441 mas, bmaj=28.31 mas, bpa=-8.771 degrees ! Estimated noise=1000.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000753568 Jy ! Component: 100 - total flux cleaned = -0.000908628 Jy ! Component: 150 - total flux cleaned = -0.000991199 Jy ! Component: 200 - total flux cleaned = -0.00107762 Jy ! Total flux subtracted in 200 components = -0.00107762 Jy ! Clean residual min=-0.002014 max=0.002075 Jy/beam ! Clean residual mean=-0.000004 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.133448 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 158 components and 0.133448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091550Jy sigma=0.000716 ! Fit after self-cal, rms=0.091663Jy sigma=0.000716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145406 Jy ! Component: 100 - total flux cleaned = -0.000131417 Jy ! Component: 150 - total flux cleaned = -0.000144007 Jy ! Component: 200 - total flux cleaned = -0.000156262 Jy ! Total flux subtracted in 200 components = -0.000156262 Jy ! Clean residual min=-0.001968 max=0.002023 Jy/beam ! Clean residual mean=-0.000004 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.133292 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 166 components and 0.133292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091661Jy sigma=0.000716 ! Fit after self-cal, rms=0.091661Jy sigma=0.000716 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=27.64 mas, bpa=-13.07 degrees ! Estimated noise=874.083 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.877 x 27.64 at -13.07 degrees (North through East) ! Clean map min=-0.0019736 max=0.11429 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=29.27 mas, bpa=-13.09 degrees ! Estimated noise=1556.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0893004 Jy ! Component: 100 - total flux cleaned = 0.112197 Jy ! Component: 150 - total flux cleaned = 0.123598 Jy ! Component: 200 - total flux cleaned = 0.129918 Jy ! Total flux subtracted in 200 components = 0.129918 Jy ! Clean residual min=-0.003656 max=0.003754 Jy/beam ! Clean residual mean=-0.000011 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.129918 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.129918 Jy ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=27.64 mas, bpa=-13.07 degrees ! Estimated noise=874.083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353255 Jy ! Component: 100 - total flux cleaned = 0.0045494 Jy ! Component: 150 - total flux cleaned = 0.00455058 Jy ! Component: 200 - total flux cleaned = 0.00438356 Jy ! Total flux subtracted in 200 components = 0.00438356 Jy ! Clean residual min=-0.002225 max=0.002182 Jy/beam ! Clean residual mean=-0.000004 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.134302 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 54 components and 0.134302 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.441 mas, bmaj=28.31 mas, bpa=-8.771 degrees ! Estimated noise=1000.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313074 Jy ! Component: 100 - total flux cleaned = -0.000413618 Jy ! Component: 150 - total flux cleaned = -0.000532325 Jy ! Component: 200 - total flux cleaned = -0.000635005 Jy ! Total flux subtracted in 200 components = -0.000635005 Jy ! Clean residual min=-0.002127 max=0.002031 Jy/beam ! Clean residual mean=-0.000004 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.133667 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.00361e-05 Jy ! Component: 100 - total flux cleaned = -0.00014979 Jy ! Component: 150 - total flux cleaned = -0.000185196 Jy ! Component: 200 - total flux cleaned = -0.000234441 Jy ! Total flux subtracted in 200 components = -0.000234441 Jy ! Clean residual min=-0.002049 max=0.002015 Jy/beam ! Clean residual mean=-0.000004 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.133432 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 83 components and 0.133432 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=27.64 mas, bpa=-13.07 degrees ! Estimated noise=874.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185294 Jy ! Component: 100 - total flux cleaned = 0.00022798 Jy ! Component: 150 - total flux cleaned = 0.000208478 Jy ! Component: 200 - total flux cleaned = 0.000208845 Jy ! Total flux subtracted in 200 components = 0.000208845 Jy ! Clean residual min=-0.001995 max=0.002093 Jy/beam ! Clean residual mean=-0.000003 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.133641 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 106 components and 0.133641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091672Jy sigma=0.000716 ! Fit after self-cal, rms=0.091668Jy sigma=0.000716 wmodel J0626-1512_S_2017_10_21_pus_map.mod ! Writing 106 model components to file: J0626-1512_S_2017_10_21_pus_map.mod wobs J0626-1512_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0626-1512_S_2017_10_21_pus_uvs.fits wwins J0626-1512_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0626-1512_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356747 Jy ! Component: 100 - total flux cleaned = 3.02919e-05 Jy ! Component: 150 - total flux cleaned = -0.000334599 Jy ! Component: 200 - total flux cleaned = -0.000706038 Jy ! Component: 250 - total flux cleaned = -0.00089572 Jy ! Component: 300 - total flux cleaned = -0.000998355 Jy ! Component: 350 - total flux cleaned = -0.00112027 Jy ! Component: 400 - total flux cleaned = -0.00116656 Jy ! Component: 450 - total flux cleaned = -0.0012111 Jy ! Component: 500 - total flux cleaned = -0.0012978 Jy ! Component: 550 - total flux cleaned = -0.00131892 Jy ! Component: 600 - total flux cleaned = -0.00142138 Jy ! Component: 650 - total flux cleaned = -0.00142182 Jy ! Component: 700 - total flux cleaned = -0.00148017 Jy ! Component: 750 - total flux cleaned = -0.00149904 Jy ! Component: 800 - total flux cleaned = -0.00155407 Jy ! Component: 850 - total flux cleaned = -0.00157177 Jy ! Component: 900 - total flux cleaned = -0.00157181 Jy ! Component: 950 - total flux cleaned = -0.00162343 Jy ! Component: 1000 - total flux cleaned = -0.00164029 Jy ! Component: 1050 - total flux cleaned = -0.00167344 Jy ! Component: 1100 - total flux cleaned = -0.00172177 Jy ! Component: 1150 - total flux cleaned = -0.00180027 Jy ! Component: 1200 - total flux cleaned = -0.00180012 Jy ! Component: 1250 - total flux cleaned = -0.00187562 Jy ! Component: 1300 - total flux cleaned = -0.0019052 Jy ! Component: 1350 - total flux cleaned = -0.00197823 Jy ! Component: 1400 - total flux cleaned = -0.00197797 Jy ! Component: 1450 - total flux cleaned = -0.00202016 Jy ! Component: 1500 - total flux cleaned = -0.00207562 Jy ! Component: 1550 - total flux cleaned = -0.00213019 Jy ! Component: 1600 - total flux cleaned = -0.00217077 Jy ! Component: 1650 - total flux cleaned = -0.00223724 Jy ! Component: 1700 - total flux cleaned = -0.00228983 Jy ! Component: 1750 - total flux cleaned = -0.00239285 Jy ! Component: 1800 - total flux cleaned = -0.00243065 Jy ! Component: 1850 - total flux cleaned = -0.00245572 Jy ! Component: 1900 - total flux cleaned = -0.00250513 Jy ! Component: 1950 - total flux cleaned = -0.00252964 Jy ! Component: 2000 - total flux cleaned = -0.00259003 Jy ! Component: 2050 - total flux cleaned = -0.00260202 Jy ! Component: 2100 - total flux cleaned = -0.00262572 Jy ! Component: 2150 - total flux cleaned = -0.00264908 Jy ! Component: 2200 - total flux cleaned = -0.00269508 Jy ! Component: 2250 - total flux cleaned = -0.00274038 Jy ! Component: 2300 - total flux cleaned = -0.00275165 Jy ! Component: 2350 - total flux cleaned = -0.00279604 Jy ! Component: 2400 - total flux cleaned = -0.00281811 Jy ! Component: 2450 - total flux cleaned = -0.00285068 Jy ! Component: 2500 - total flux cleaned = -0.00286146 Jy ! Component: 2550 - total flux cleaned = -0.00289364 Jy ! Component: 2600 - total flux cleaned = -0.00292536 Jy ! Component: 2650 - total flux cleaned = -0.00293567 Jy ! Component: 2700 - total flux cleaned = -0.00295627 Jy ! Component: 2750 - total flux cleaned = -0.00293569 Jy ! Component: 2800 - total flux cleaned = -0.00295598 Jy ! Component: 2850 - total flux cleaned = -0.00294595 Jy ! Component: 2900 - total flux cleaned = -0.00297604 Jy ! Component: 2950 - total flux cleaned = -0.00300581 Jy ! Component: 3000 - total flux cleaned = -0.00304527 Jy ! Component: 3050 - total flux cleaned = -0.0030746 Jy ! Component: 3100 - total flux cleaned = -0.00308431 Jy ! Component: 3150 - total flux cleaned = -0.00313241 Jy ! Component: 3200 - total flux cleaned = -0.00317052 Jy ! Component: 3250 - total flux cleaned = -0.00318941 Jy ! Component: 3300 - total flux cleaned = -0.00323651 Jy ! Component: 3350 - total flux cleaned = -0.00327387 Jy ! Component: 3400 - total flux cleaned = -0.00329251 Jy ! Component: 3450 - total flux cleaned = -0.00331104 Jy ! Component: 3500 - total flux cleaned = -0.00335684 Jy ! Component: 3550 - total flux cleaned = -0.00340218 Jy ! Component: 3600 - total flux cleaned = -0.00340224 Jy ! Component: 3650 - total flux cleaned = -0.00342025 Jy ! Component: 3700 - total flux cleaned = -0.00347362 Jy ! Component: 3750 - total flux cleaned = -0.00350005 Jy ! Component: 3800 - total flux cleaned = -0.00349122 Jy ! Component: 3850 - total flux cleaned = -0.00349998 Jy ! Component: 3900 - total flux cleaned = -0.00358678 Jy ! Component: 3950 - total flux cleaned = -0.00361251 Jy ! Component: 4000 - total flux cleaned = -0.00358683 Jy ! Component: 4050 - total flux cleaned = -0.00363794 Jy ! Total flux subtracted in 4096 components = -0.00366339 Jy ! Clean residual min=-0.000483 max=0.000525 Jy/beam ! Clean residual mean=-0.000001 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.129978 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 424 components and 0.129978 Jy ![Exited script file: muppet] wmap "J0626-1512_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.877 x 27.64 at -13.07 degrees (North through East) ! Clean map min=-0.002181 max=0.11444 Jy/beam ! Writing clean map to FITS file: J0626-1512_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114445 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159914 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.41919 0.41919 0.838381 1.67676 3.35352 6.70705 13.4141 26.8282 53.6564 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.877 x 27.64 at -13.07 degrees (North through East) ! Clean map min=-0.002181 max=0.11444 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0626-1512_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:52:34 2019