! Started logfile: J0626-1512_S_2017_05_27_pus_uvs.log on Fri May 3 10:58:43 2019 obs J0626-1512_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0626-1512_S_2017_05_27_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977544 visibilities/baseline/integration-bin. ! Found source: J0626-1512 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 16716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0626-1512_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 489 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.878996Jy sigma=0.062395 ! Fit after self-cal, rms=0.881323Jy sigma=0.062352 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=7.234 mas, bpa=5.346 degrees ! Estimated noise=347.652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227893 Jy ! Component: 100 - total flux cleaned = 0.0252379 Jy ! Total flux subtracted in 100 components = 0.0252379 Jy ! Clean residual min=-0.010580 max=0.019992 Jy/beam ! Clean residual mean=-0.000063 rms=0.003440 Jy/beam ! Combined flux in latest and established models = 0.0252379 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0252379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164113Jy sigma=0.001662 ! Fit after self-cal, rms=0.164008Jy sigma=0.001659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.838 mas, bmaj=7.935 mas, bpa=5.435 degrees ! Estimated noise=301.207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (38.5, -51). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251784 Jy ! Component: 100 - total flux cleaned = 0.0428694 Jy ! Component: 150 - total flux cleaned = 0.0570099 Jy ! Component: 200 - total flux cleaned = 0.0685105 Jy ! Total flux subtracted in 200 components = 0.0685105 Jy ! Clean residual min=-0.010697 max=0.021843 Jy/beam ! Clean residual mean=-0.000076 rms=0.003475 Jy/beam ! Combined flux in latest and established models = 0.0937485 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.0937485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145443Jy sigma=0.001820 ! Fit after self-cal, rms=0.140909Jy sigma=0.001798 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 11.99 FD 0.62 HN 0.81 KP 0.75 ! LA 0.76 MK 0.71 NL 0.71 OV 0.68 ! PT 0.79 SC 0.67 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.58 HN 0.80 KP 0.66 ! LA 0.70 MK 0.78 NL 0.83 OV 0.71 ! PT 0.73 SC 0.58 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 14.65 FD 0.59 HN 0.78 KP 0.74 ! LA 0.74 MK 0.89 NL 0.82 OV 0.66 ! PT 0.76 SC 0.60 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.63 HN 0.79 KP 1.00* ! LA 0.65 MK 0.87 NL 1.00* OV 1.00* ! PT 0.77 SC 1.00* ! ! ! Fit before self-cal, rms=0.140909Jy sigma=0.001798 ! Fit after self-cal, rms=0.433929Jy sigma=0.000774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=8.33 mas, bpa=-0.276 degrees ! Estimated noise=458.374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000953702 Jy ! Component: 100 - total flux cleaned = -0.00203758 Jy ! Component: 150 - total flux cleaned = -0.00222779 Jy ! Component: 200 - total flux cleaned = -0.00237437 Jy ! Total flux subtracted in 200 components = -0.00237437 Jy ! Clean residual min=-0.004752 max=0.004200 Jy/beam ! Clean residual mean=0.000005 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.0913741 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 0.0913741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.432175Jy sigma=0.000759 ! Fit after self-cal, rms=0.431662Jy sigma=0.000703 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276466 Jy ! Component: 100 - total flux cleaned = 0.00263418 Jy ! Component: 150 - total flux cleaned = 0.00253195 Jy ! Component: 200 - total flux cleaned = 0.00233785 Jy ! Total flux subtracted in 200 components = 0.00233785 Jy ! Clean residual min=-0.004887 max=0.003796 Jy/beam ! Clean residual mean=0.000001 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.0937119 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.0937119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.430563Jy sigma=0.000700 ! Fit after self-cal, rms=0.430561Jy sigma=0.000699 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.430561Jy sigma=0.000699 ! Fit after self-cal, rms=0.603204Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.401 mas, bpa=-0.3726 degrees ! Estimated noise=478.027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000770168 Jy ! Component: 100 - total flux cleaned = 0.000782405 Jy ! Component: 150 - total flux cleaned = 0.000677047 Jy ! Component: 200 - total flux cleaned = 0.000580685 Jy ! Total flux subtracted in 200 components = 0.000580685 Jy ! Clean residual min=-0.004413 max=0.003170 Jy/beam ! Clean residual mean=0.000008 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.0942926 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 71 components and 0.0942926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.602249Jy sigma=0.000677 ! Fit after self-cal, rms=0.602257Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00067863 Jy ! Component: 100 - total flux cleaned = -0.000859966 Jy ! Component: 150 - total flux cleaned = -0.00103435 Jy ! Component: 200 - total flux cleaned = -0.00119837 Jy ! Total flux subtracted in 200 components = -0.00119837 Jy ! Clean residual min=-0.003981 max=0.002969 Jy/beam ! Clean residual mean=0.000007 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.0930942 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 80 components and 0.0930942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.601593Jy sigma=0.000674 ! Fit after self-cal, rms=0.601600Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.601600Jy sigma=0.000674 ! Fit after self-cal, rms=0.058364Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=8.36 mas, bpa=-0.5626 degrees ! Estimated noise=476.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101696 Jy ! Component: 100 - total flux cleaned = -0.0010151 Jy ! Component: 150 - total flux cleaned = -0.0010191 Jy ! Component: 200 - total flux cleaned = -0.000880673 Jy ! Total flux subtracted in 200 components = -0.000880673 Jy ! Clean residual min=-0.003040 max=0.002049 Jy/beam ! Clean residual mean=0.000004 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.0922136 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 92 components and 0.0922136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058214Jy sigma=0.000656 ! Fit after self-cal, rms=0.058147Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00054253 Jy ! Component: 100 - total flux cleaned = -0.000637708 Jy ! Component: 150 - total flux cleaned = -0.000596451 Jy ! Component: 200 - total flux cleaned = -0.000558725 Jy ! Total flux subtracted in 200 components = -0.000558725 Jy ! Clean residual min=-0.002726 max=0.001989 Jy/beam ! Clean residual mean=0.000004 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0916548 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 100 components and 0.0916548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058051Jy sigma=0.000654 ! Fit after self-cal, rms=0.058041Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058041Jy sigma=0.000654 ! Fit after self-cal, rms=0.058086Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.548 mas, bmaj=15.91 mas, bpa=-1.406 degrees ! Estimated noise=580.444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000435943 Jy ! Component: 100 - total flux cleaned = -0.000330956 Jy ! Component: 150 - total flux cleaned = -0.000291737 Jy ! Component: 200 - total flux cleaned = -0.000342609 Jy ! Total flux subtracted in 200 components = -0.000342609 Jy ! Clean residual min=-0.002504 max=0.001929 Jy/beam ! Clean residual mean=0.000008 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.0913122 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 102 components and 0.0913122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058034Jy sigma=0.000652 ! Fit after self-cal, rms=0.058002Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00051739 Jy ! Component: 100 - total flux cleaned = -0.000554315 Jy ! Component: 150 - total flux cleaned = -0.000601506 Jy ! Component: 200 - total flux cleaned = -0.000660913 Jy ! Total flux subtracted in 200 components = -0.000660913 Jy ! Clean residual min=-0.002235 max=0.001943 Jy/beam ! Clean residual mean=0.000009 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0906513 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 105 components and 0.0906513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057972Jy sigma=0.000652 ! Fit after self-cal, rms=0.057966Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=8.374 mas, bpa=-0.7044 degrees ! Estimated noise=478.517 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.258 x 8.374 at -0.7044 degrees (North through East) ! Clean map min=-0.00416 max=0.061114 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.727 mas, bmaj=7.092 mas, bpa=-0.5787 degrees ! Estimated noise=760.813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.054884 Jy ! Component: 100 - total flux cleaned = 0.0689087 Jy ! Component: 150 - total flux cleaned = 0.0757182 Jy ! Component: 200 - total flux cleaned = 0.0801202 Jy ! Total flux subtracted in 200 components = 0.0801202 Jy ! Clean residual min=-0.002780 max=0.003811 Jy/beam ! Clean residual mean=-0.000007 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.0801202 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0801202 Jy ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=8.374 mas, bpa=-0.7044 degrees ! Estimated noise=478.517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463607 Jy ! Component: 100 - total flux cleaned = 0.00730476 Jy ! Component: 150 - total flux cleaned = 0.00853049 Jy ! Component: 200 - total flux cleaned = 0.0090208 Jy ! Total flux subtracted in 200 components = 0.0090208 Jy ! Clean residual min=-0.002048 max=0.001937 Jy/beam ! Clean residual mean=0.000002 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.089141 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 40 components and 0.089141 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.548 mas, bmaj=15.91 mas, bpa=-1.406 degrees ! Estimated noise=580.444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000876374 Jy ! Component: 100 - total flux cleaned = 0.000848887 Jy ! Component: 150 - total flux cleaned = 0.00082456 Jy ! Component: 200 - total flux cleaned = 0.000824852 Jy ! Total flux subtracted in 200 components = 0.000824852 Jy ! Clean residual min=-0.002018 max=0.001867 Jy/beam ! Clean residual mean=0.000008 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0899659 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.73272e-07 Jy ! Component: 100 - total flux cleaned = 2.26929e-07 Jy ! Component: 150 - total flux cleaned = -1.06527e-07 Jy ! Component: 200 - total flux cleaned = -1.55527e-05 Jy ! Total flux subtracted in 200 components = -1.55527e-05 Jy ! Clean residual min=-0.002036 max=0.001868 Jy/beam ! Clean residual mean=0.000008 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0899503 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 70 components and 0.0899503 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=8.374 mas, bpa=-0.7044 degrees ! Estimated noise=478.517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.23011e-05 Jy ! Component: 100 - total flux cleaned = 3.60031e-05 Jy ! Component: 150 - total flux cleaned = 1.3146e-06 Jy ! Component: 200 - total flux cleaned = -6.20424e-05 Jy ! Total flux subtracted in 200 components = -6.20424e-05 Jy ! Clean residual min=-0.001897 max=0.001585 Jy/beam ! Clean residual mean=0.000004 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0898883 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.0898883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057808Jy sigma=0.000650 ! Fit after self-cal, rms=0.057706Jy sigma=0.000649 wmodel J0626-1512_S_2017_05_27_pus_map.mod ! Writing 87 model components to file: J0626-1512_S_2017_05_27_pus_map.mod wobs J0626-1512_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0626-1512_S_2017_05_27_pus_uvs.fits wwins J0626-1512_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J0626-1512_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000775928 Jy ! Component: 100 - total flux cleaned = -0.00134261 Jy ! Component: 150 - total flux cleaned = -0.00164378 Jy ! Component: 200 - total flux cleaned = -0.00185662 Jy ! Component: 250 - total flux cleaned = -0.00201529 Jy ! Component: 300 - total flux cleaned = -0.00214568 Jy ! Component: 350 - total flux cleaned = -0.00227075 Jy ! Component: 400 - total flux cleaned = -0.00224972 Jy ! Component: 450 - total flux cleaned = -0.00223011 Jy ! Component: 500 - total flux cleaned = -0.0022492 Jy ! Component: 550 - total flux cleaned = -0.00226817 Jy ! Component: 600 - total flux cleaned = -0.00230499 Jy ! Component: 650 - total flux cleaned = -0.00234098 Jy ! Component: 700 - total flux cleaned = -0.00241056 Jy ! Component: 750 - total flux cleaned = -0.0024275 Jy ! Component: 800 - total flux cleaned = -0.00242743 Jy ! Component: 850 - total flux cleaned = -0.00245987 Jy ! Component: 900 - total flux cleaned = -0.00244353 Jy ! Component: 950 - total flux cleaned = -0.00238058 Jy ! Component: 1000 - total flux cleaned = -0.00236512 Jy ! Component: 1050 - total flux cleaned = -0.00233497 Jy ! Component: 1100 - total flux cleaned = -0.00234992 Jy ! Component: 1150 - total flux cleaned = -0.0023499 Jy ! Component: 1200 - total flux cleaned = -0.00236439 Jy ! Component: 1250 - total flux cleaned = -0.00242066 Jy ! Component: 1300 - total flux cleaned = -0.0023926 Jy ! Component: 1350 - total flux cleaned = -0.00241979 Jy ! Component: 1400 - total flux cleaned = -0.00236553 Jy ! Component: 1450 - total flux cleaned = -0.00243202 Jy ! Component: 1500 - total flux cleaned = -0.00248414 Jy ! Component: 1550 - total flux cleaned = -0.0025485 Jy ! Component: 1600 - total flux cleaned = -0.00256103 Jy ! Component: 1650 - total flux cleaned = -0.00259838 Jy ! Component: 1700 - total flux cleaned = -0.0026605 Jy ! Component: 1750 - total flux cleaned = -0.00278329 Jy ! Component: 1800 - total flux cleaned = -0.0028436 Jy ! Component: 1850 - total flux cleaned = -0.00290337 Jy ! Component: 1900 - total flux cleaned = -0.00297452 Jy ! Component: 1950 - total flux cleaned = -0.00309121 Jy ! Component: 2000 - total flux cleaned = -0.00317177 Jy ! Component: 2050 - total flux cleaned = -0.00325147 Jy ! Component: 2100 - total flux cleaned = -0.00333031 Jy ! Component: 2150 - total flux cleaned = -0.00338597 Jy ! Component: 2200 - total flux cleaned = -0.0035069 Jy ! Component: 2250 - total flux cleaned = -0.00353945 Jy ! Component: 2300 - total flux cleaned = -0.00361449 Jy ! Component: 2350 - total flux cleaned = -0.00365706 Jy ! Component: 2400 - total flux cleaned = -0.00372021 Jy ! Component: 2450 - total flux cleaned = -0.00380329 Jy ! Component: 2500 - total flux cleaned = -0.00381365 Jy ! Component: 2550 - total flux cleaned = -0.00389516 Jy ! Component: 2600 - total flux cleaned = -0.00393538 Jy ! Component: 2650 - total flux cleaned = -0.00398533 Jy ! Component: 2700 - total flux cleaned = -0.0040346 Jy ! Component: 2750 - total flux cleaned = -0.00408335 Jy ! Component: 2800 - total flux cleaned = -0.00410263 Jy ! Component: 2850 - total flux cleaned = -0.00413146 Jy ! Component: 2900 - total flux cleaned = -0.00413158 Jy ! Component: 2950 - total flux cleaned = -0.00418798 Jy ! Component: 3000 - total flux cleaned = -0.00416944 Jy ! Component: 3050 - total flux cleaned = -0.00416947 Jy ! Component: 3100 - total flux cleaned = -0.00421535 Jy ! Component: 3150 - total flux cleaned = -0.00422435 Jy ! Component: 3200 - total flux cleaned = -0.00423345 Jy ! Component: 3250 - total flux cleaned = -0.00425125 Jy ! Component: 3300 - total flux cleaned = -0.00428675 Jy ! Component: 3350 - total flux cleaned = -0.00434832 Jy ! Component: 3400 - total flux cleaned = -0.00440052 Jy ! Component: 3450 - total flux cleaned = -0.00446116 Jy ! Component: 3500 - total flux cleaned = -0.00447837 Jy ! Component: 3550 - total flux cleaned = -0.00453804 Jy ! Component: 3600 - total flux cleaned = -0.00458872 Jy ! Component: 3650 - total flux cleaned = -0.00461389 Jy ! Component: 3700 - total flux cleaned = -0.00468064 Jy ! Component: 3750 - total flux cleaned = -0.00476337 Jy ! Component: 3800 - total flux cleaned = -0.00478802 Jy ! Component: 3850 - total flux cleaned = -0.00485332 Jy ! Component: 3900 - total flux cleaned = -0.0049263 Jy ! Component: 3950 - total flux cleaned = -0.00495854 Jy ! Component: 4000 - total flux cleaned = -0.00505463 Jy ! Component: 4050 - total flux cleaned = -0.00510229 Jy ! Total flux subtracted in 4096 components = -0.00514965 Jy ! Clean residual min=-0.000445 max=0.000478 Jy/beam ! Clean residual mean=-0.000000 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.0847386 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 381 components and 0.0847386 Jy ![Exited script file: muppet] wmap "J0626-1512_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.258 x 8.374 at -0.7044 degrees (North through East) ! Clean map min=-0.00119 max=0.067231 Jy/beam ! Writing clean map to FITS file: J0626-1512_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0672307 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000144128 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.643136 0.643136 1.28627 2.57254 5.14509 10.2902 20.5804 41.1607 82.3214 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.258 x 8.374 at -0.7044 degrees (North through East) ! Clean map min=-0.00119 max=0.067231 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0626-1512_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:58:48 2019