! Started logfile: J0624-0103_S_2017_06_15_pus_uvs.log on Tue May 7 15:12:44 2019 obs J0624-0103_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0624-0103_S_2017_06_15_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.944055 visibilities/baseline/integration-bin. ! Found source: J0624-0103 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 19372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0624-0103_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 624 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.962682Jy sigma=0.008052 ! Fit after self-cal, rms=0.937674Jy sigma=0.007872 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.728 mas, bmaj=7.009 mas, bpa=-2.975 degrees ! Estimated noise=913.553 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0500727 Jy ! Component: 100 - total flux cleaned = 0.0623658 Jy ! Total flux subtracted in 100 components = 0.0623658 Jy ! Clean residual min=-0.004163 max=0.008001 Jy/beam ! Clean residual mean=0.000015 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.0623658 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0623658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086185Jy sigma=0.000682 ! Fit after self-cal, rms=0.085960Jy sigma=0.000680 ! Inverting map ! Added new window around map position (-4, -11.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00787111 Jy ! Component: 100 - total flux cleaned = 0.0127603 Jy ! Total flux subtracted in 100 components = 0.0127603 Jy ! Clean residual min=-0.003418 max=0.003535 Jy/beam ! Clean residual mean=0.000011 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.0751261 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.0751261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085086Jy sigma=0.000672 ! Fit after self-cal, rms=0.085013Jy sigma=0.000671 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.111 mas, bpa=-4.122 degrees ! Estimated noise=708.403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00559576 Jy ! Component: 100 - total flux cleaned = 0.00887412 Jy ! Component: 150 - total flux cleaned = 0.011099 Jy ! Component: 200 - total flux cleaned = 0.0126408 Jy ! Total flux subtracted in 200 components = 0.0126408 Jy ! Clean residual min=-0.002595 max=0.002228 Jy/beam ! Clean residual mean=0.000003 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0877669 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 53 components and 0.0877669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084645Jy sigma=0.000667 ! Fit after self-cal, rms=0.084615Jy sigma=0.000667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.92 HN 1.00 KP 0.98 ! LA 1.01 MK 1.07 NL 0.94 OV 0.99 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.85 FD 1.01 HN 1.10 KP 0.96 ! LA 0.97 MK 1.05 NL 1.05 OV 1.00 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.01 KP 0.97 ! LA 1.00 MK 1.02 NL 1.00 OV 0.97 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.85 KP 1.00* ! LA 0.91 MK 0.91 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.084615Jy sigma=0.000667 ! Fit after self-cal, rms=0.085252Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=8.182 mas, bpa=-3.965 degrees ! Estimated noise=706.206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125345 Jy ! Component: 100 - total flux cleaned = 0.00138828 Jy ! Component: 150 - total flux cleaned = 0.00146695 Jy ! Component: 200 - total flux cleaned = 0.00148271 Jy ! Total flux subtracted in 200 components = 0.00148271 Jy ! Clean residual min=-0.002269 max=0.002042 Jy/beam ! Clean residual mean=0.000001 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0892496 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 72 components and 0.0892496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085232Jy sigma=0.000665 ! Fit after self-cal, rms=0.085272Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085272Jy sigma=0.000665 ! Fit after self-cal, rms=0.085846Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=8.164 mas, bpa=-3.999 degrees ! Estimated noise=703.576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000864087 Jy ! Component: 100 - total flux cleaned = 0.000936613 Jy ! Component: 150 - total flux cleaned = 0.000991315 Jy ! Component: 200 - total flux cleaned = 0.00103768 Jy ! Total flux subtracted in 200 components = 0.00103768 Jy ! Clean residual min=-0.002157 max=0.001822 Jy/beam ! Clean residual mean=0.000001 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0902873 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 83 components and 0.0902873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085833Jy sigma=0.000663 ! Fit after self-cal, rms=0.085902Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191278 Jy ! Component: 100 - total flux cleaned = 0.000235656 Jy ! Component: 150 - total flux cleaned = 0.000260591 Jy ! Component: 200 - total flux cleaned = 0.000272226 Jy ! Total flux subtracted in 200 components = 0.000272226 Jy ! Clean residual min=-0.002147 max=0.001803 Jy/beam ! Clean residual mean=0.000000 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0905595 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 86 components and 0.0905595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085896Jy sigma=0.000663 ! Fit after self-cal, rms=0.085898Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085898Jy sigma=0.000663 ! Fit after self-cal, rms=0.086310Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.218 mas, bmaj=8.154 mas, bpa=-4.073 degrees ! Estimated noise=701.208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000487103 Jy ! Component: 100 - total flux cleaned = 0.000590674 Jy ! Component: 150 - total flux cleaned = 0.000632183 Jy ! Component: 200 - total flux cleaned = 0.00063232 Jy ! Total flux subtracted in 200 components = 0.00063232 Jy ! Clean residual min=-0.002124 max=0.001807 Jy/beam ! Clean residual mean=0.000001 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0911918 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.0911918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086304Jy sigma=0.000663 ! Fit after self-cal, rms=0.086312Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.55037e-05 Jy ! Component: 100 - total flux cleaned = 0.000121644 Jy ! Component: 150 - total flux cleaned = 0.000132491 Jy ! Component: 200 - total flux cleaned = 0.000132524 Jy ! Total flux subtracted in 200 components = 0.000132524 Jy ! Clean residual min=-0.002120 max=0.001809 Jy/beam ! Clean residual mean=0.000001 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0913243 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 0.0913244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086309Jy sigma=0.000663 ! Fit after self-cal, rms=0.086302Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086302Jy sigma=0.000663 ! Fit after self-cal, rms=0.086219Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.522 mas, bmaj=13.44 mas, bpa=-5 degrees ! Estimated noise=870.096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493767 Jy ! Component: 100 - total flux cleaned = 0.000478145 Jy ! Component: 150 - total flux cleaned = 0.000469525 Jy ! Component: 200 - total flux cleaned = 0.000452766 Jy ! Total flux subtracted in 200 components = 0.000452766 Jy ! Clean residual min=-0.002203 max=0.001983 Jy/beam ! Clean residual mean=0.000002 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0917771 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 99 components and 0.0917771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086218Jy sigma=0.000663 ! Fit after self-cal, rms=0.086215Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.61743e-05 Jy ! Component: 100 - total flux cleaned = 7.80024e-05 Jy ! Component: 150 - total flux cleaned = 6.38172e-05 Jy ! Component: 200 - total flux cleaned = 5.08849e-05 Jy ! Total flux subtracted in 200 components = 5.08849e-05 Jy ! Clean residual min=-0.002171 max=0.001992 Jy/beam ! Clean residual mean=0.000002 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.091828 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 100 components and 0.091828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086216Jy sigma=0.000663 ! Fit after self-cal, rms=0.086215Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=8.152 mas, bpa=-4.139 degrees ! Estimated noise=700.081 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.219 x 8.152 at -4.139 degrees (North through East) ! Clean map min=-0.002013 max=0.061996 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=7.044 mas, bpa=-3.125 degrees ! Estimated noise=880.869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0488039 Jy ! Component: 100 - total flux cleaned = 0.0637424 Jy ! Component: 150 - total flux cleaned = 0.0724847 Jy ! Component: 200 - total flux cleaned = 0.078091 Jy ! Total flux subtracted in 200 components = 0.078091 Jy ! Clean residual min=-0.003135 max=0.003159 Jy/beam ! Clean residual mean=0.000008 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.078091 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.078091 Jy ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=8.152 mas, bpa=-4.139 degrees ! Estimated noise=700.081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489666 Jy ! Component: 100 - total flux cleaned = 0.00787886 Jy ! Component: 150 - total flux cleaned = 0.00985863 Jy ! Component: 200 - total flux cleaned = 0.0111943 Jy ! Total flux subtracted in 200 components = 0.0111943 Jy ! Clean residual min=-0.002489 max=0.001795 Jy/beam ! Clean residual mean=0.000002 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0892852 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 52 components and 0.0892852 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.522 mas, bmaj=13.44 mas, bpa=-5 degrees ! Estimated noise=870.096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144775 Jy ! Component: 100 - total flux cleaned = 0.00205193 Jy ! Component: 150 - total flux cleaned = 0.00229918 Jy ! Component: 200 - total flux cleaned = 0.00230783 Jy ! Total flux subtracted in 200 components = 0.00230783 Jy ! Clean residual min=-0.002206 max=0.001985 Jy/beam ! Clean residual mean=0.000002 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0915931 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.98036e-07 Jy ! Component: 100 - total flux cleaned = -6.65383e-06 Jy ! Component: 150 - total flux cleaned = -6.31863e-06 Jy ! Component: 200 - total flux cleaned = -6.33872e-06 Jy ! Total flux subtracted in 200 components = -6.33872e-06 Jy ! Clean residual min=-0.002200 max=0.001990 Jy/beam ! Clean residual mean=0.000002 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0915867 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 70 components and 0.0915867 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=8.152 mas, bpa=-4.139 degrees ! Estimated noise=700.081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164029 Jy ! Component: 100 - total flux cleaned = -0.000143246 Jy ! Component: 150 - total flux cleaned = -0.000143303 Jy ! Component: 200 - total flux cleaned = -0.000143129 Jy ! Total flux subtracted in 200 components = -0.000143129 Jy ! Clean residual min=-0.002369 max=0.001811 Jy/beam ! Clean residual mean=0.000001 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0914436 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 84 components and 0.0914436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086240Jy sigma=0.000663 ! Fit after self-cal, rms=0.086243Jy sigma=0.000663 wmodel J0624-0103_S_2017_06_15_pus_map.mod ! Writing 84 model components to file: J0624-0103_S_2017_06_15_pus_map.mod wobs J0624-0103_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0624-0103_S_2017_06_15_pus_uvs.fits wwins J0624-0103_S_2017_06_15_pus_map.win ! wwins: Wrote 2 windows to J0624-0103_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000551587 Jy ! Component: 100 - total flux cleaned = -0.000551164 Jy ! Component: 150 - total flux cleaned = -0.000520366 Jy ! Component: 200 - total flux cleaned = -0.000548998 Jy ! Component: 250 - total flux cleaned = -0.00046595 Jy ! Component: 300 - total flux cleaned = -0.000412617 Jy ! Component: 350 - total flux cleaned = -0.000256749 Jy ! Component: 400 - total flux cleaned = -5.36124e-05 Jy ! Component: 450 - total flux cleaned = 0.000119366 Jy ! Component: 500 - total flux cleaned = 0.000192458 Jy ! Component: 550 - total flux cleaned = 0.00031134 Jy ! Component: 600 - total flux cleaned = 0.000357707 Jy ! Component: 650 - total flux cleaned = 0.000357583 Jy ! Component: 700 - total flux cleaned = 0.000313182 Jy ! Component: 750 - total flux cleaned = 0.000401237 Jy ! Component: 800 - total flux cleaned = 0.000465377 Jy ! Component: 850 - total flux cleaned = 0.000507617 Jy ! Component: 900 - total flux cleaned = 0.000632839 Jy ! Component: 950 - total flux cleaned = 0.000591429 Jy ! Component: 1000 - total flux cleaned = 0.000632117 Jy ! Component: 1050 - total flux cleaned = 0.000691974 Jy ! Component: 1100 - total flux cleaned = 0.000672293 Jy ! Component: 1150 - total flux cleaned = 0.000730773 Jy ! Component: 1200 - total flux cleaned = 0.000826497 Jy ! Component: 1250 - total flux cleaned = 0.000845227 Jy ! Component: 1300 - total flux cleaned = 0.00090115 Jy ! Component: 1350 - total flux cleaned = 0.000901023 Jy ! Component: 1400 - total flux cleaned = 0.000901176 Jy ! Component: 1450 - total flux cleaned = 0.000901314 Jy ! Component: 1500 - total flux cleaned = 0.000972391 Jy ! Component: 1550 - total flux cleaned = 0.000954753 Jy ! Component: 1600 - total flux cleaned = 0.000954851 Jy ! Component: 1650 - total flux cleaned = 0.000955053 Jy ! Component: 1700 - total flux cleaned = 0.00097229 Jy ! Component: 1750 - total flux cleaned = 0.00095549 Jy ! Component: 1800 - total flux cleaned = 0.000989229 Jy ! Component: 1850 - total flux cleaned = 0.00103869 Jy ! Component: 1900 - total flux cleaned = 0.00105497 Jy ! Component: 1950 - total flux cleaned = 0.00105509 Jy ! Component: 2000 - total flux cleaned = 0.00115117 Jy ! Component: 2050 - total flux cleaned = 0.00111922 Jy ! Component: 2100 - total flux cleaned = 0.0011347 Jy ! Component: 2150 - total flux cleaned = 0.00115018 Jy ! Component: 2200 - total flux cleaned = 0.00115042 Jy ! Component: 2250 - total flux cleaned = 0.0011351 Jy ! Component: 2300 - total flux cleaned = 0.00108974 Jy ! Component: 2350 - total flux cleaned = 0.00111969 Jy ! Component: 2400 - total flux cleaned = 0.00106033 Jy ! Component: 2450 - total flux cleaned = 0.00101641 Jy ! Component: 2500 - total flux cleaned = 0.00106037 Jy ! Component: 2550 - total flux cleaned = 0.00108929 Jy ! Component: 2600 - total flux cleaned = 0.00103157 Jy ! Component: 2650 - total flux cleaned = 0.000974368 Jy ! Component: 2700 - total flux cleaned = 0.000889697 Jy ! Component: 2750 - total flux cleaned = 0.000945993 Jy ! Component: 2800 - total flux cleaned = 0.000890305 Jy ! Component: 2850 - total flux cleaned = 0.000890111 Jy ! Component: 2900 - total flux cleaned = 0.000835066 Jy ! Component: 2950 - total flux cleaned = 0.000753221 Jy ! Component: 3000 - total flux cleaned = 0.000712542 Jy ! Component: 3050 - total flux cleaned = 0.000631913 Jy ! Component: 3100 - total flux cleaned = 0.000658716 Jy ! Component: 3150 - total flux cleaned = 0.000565775 Jy ! Component: 3200 - total flux cleaned = 0.000539529 Jy ! Component: 3250 - total flux cleaned = 0.000487082 Jy ! Component: 3300 - total flux cleaned = 0.000383036 Jy ! Component: 3350 - total flux cleaned = 0.000369996 Jy ! Component: 3400 - total flux cleaned = 0.000370135 Jy ! Component: 3450 - total flux cleaned = 0.000280829 Jy ! Component: 3500 - total flux cleaned = 0.000255409 Jy ! Component: 3550 - total flux cleaned = 0.00015468 Jy ! Component: 3600 - total flux cleaned = 0.000104701 Jy ! Component: 3650 - total flux cleaned = 0.000117291 Jy ! Component: 3700 - total flux cleaned = 3.07208e-05 Jy ! Component: 3750 - total flux cleaned = 3.06818e-05 Jy ! Component: 3800 - total flux cleaned = 3.05233e-05 Jy ! Component: 3850 - total flux cleaned = -1.81995e-05 Jy ! Component: 3900 - total flux cleaned = -4.23618e-05 Jy ! Component: 3950 - total flux cleaned = -5.43706e-05 Jy ! Component: 4000 - total flux cleaned = -0.000102191 Jy ! Component: 4050 - total flux cleaned = -0.000102073 Jy ! Total flux subtracted in 4096 components = -0.000113967 Jy ! Clean residual min=-0.000654 max=0.000795 Jy/beam ! Clean residual mean=0.000001 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.0913296 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 389 components and 0.0913297 Jy ![Exited script file: muppet] wmap "J0624-0103_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.219 x 8.152 at -4.139 degrees (North through East) ! Clean map min=-0.0014757 max=0.062127 Jy/beam ! Writing clean map to FITS file: J0624-0103_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0621268 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218809 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05659 1.05659 2.11319 4.22637 8.45275 16.9055 33.811 67.622 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.219 x 8.152 at -4.139 degrees (North through East) ! Clean map min=-0.0014757 max=0.062127 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0624-0103_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:12:49 2019