! Started logfile: J0623-4413_S_2017_03_23_pus_uvs.log on Mon May 13 09:51:06 2019 obs J0623-4413_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0623-4413_S_2017_03_23_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.534105 visibilities/baseline/integration-bin. ! Found source: J0623-4413 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 13844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0623-4413_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 443 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 443 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 905 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883775Jy sigma=0.004830 ! Fit after self-cal, rms=0.827643Jy sigma=0.004507 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.14 mas, bmaj=6.132 mas, bpa=-5.334 degrees ! Estimated noise=2266.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115448 Jy ! Component: 100 - total flux cleaned = 0.16956 Jy ! Total flux subtracted in 100 components = 0.16956 Jy ! Clean residual min=-0.019798 max=0.042801 Jy/beam ! Clean residual mean=-0.000646 rms=0.006404 Jy/beam ! Combined flux in latest and established models = 0.16956 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.16956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175364Jy sigma=0.000895 ! Fit after self-cal, rms=0.175150Jy sigma=0.000894 ! Inverting map ! Added new window around map position (3, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445945 Jy ! Component: 100 - total flux cleaned = 0.0732667 Jy ! Total flux subtracted in 100 components = 0.0732667 Jy ! Clean residual min=-0.014077 max=0.024681 Jy/beam ! Clean residual mean=-0.000468 rms=0.004314 Jy/beam ! Combined flux in latest and established models = 0.242827 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 0.242827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152162Jy sigma=0.000761 ! Fit after self-cal, rms=0.151452Jy sigma=0.000757 ! Inverting map ! Added new window around map position (9, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0261485 Jy ! Component: 100 - total flux cleaned = 0.0434037 Jy ! Total flux subtracted in 100 components = 0.0434037 Jy ! Clean residual min=-0.011791 max=0.017380 Jy/beam ! Clean residual mean=-0.000350 rms=0.003311 Jy/beam ! Combined flux in latest and established models = 0.286231 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 83 components and 0.286231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143369Jy sigma=0.000714 ! Fit after self-cal, rms=0.142544Jy sigma=0.000710 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=7.573 mas, bpa=-4.162 degrees ! Estimated noise=1299.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.02464 Jy ! Component: 100 - total flux cleaned = 0.0392993 Jy ! Component: 150 - total flux cleaned = 0.0486476 Jy ! Component: 200 - total flux cleaned = 0.0546774 Jy ! Total flux subtracted in 200 components = 0.0546774 Jy ! Clean residual min=-0.009922 max=0.014016 Jy/beam ! Clean residual mean=-0.000407 rms=0.002961 Jy/beam ! Combined flux in latest and established models = 0.340908 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 107 components and 0.340908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137017Jy sigma=0.000687 ! Fit after self-cal, rms=0.136539Jy sigma=0.000684 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.07 ! LA 0.99 MK 0.95 NL 1.00* OV 1.06 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.05 ! LA 0.94 MK 0.95 NL 1.00* OV 1.08 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.93 ! LA 0.75 MK 0.97 NL 1.65 OV 0.97 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 4. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 1.00* ! LA 0.59 MK 0.91 NL 1.00* OV 1.50 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.136539Jy sigma=0.000684 ! Fit after self-cal, rms=0.133011Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.508 mas, bpa=-4.228 degrees ! Estimated noise=1295.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (27.5, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685344 Jy ! Component: 100 - total flux cleaned = 0.0105164 Jy ! Component: 150 - total flux cleaned = 0.0126304 Jy ! Component: 200 - total flux cleaned = 0.0132351 Jy ! Total flux subtracted in 200 components = 0.0132351 Jy ! Clean residual min=-0.004538 max=0.004749 Jy/beam ! Clean residual mean=-0.000005 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.354143 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 128 components and 0.354143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132600Jy sigma=0.000657 ! Fit after self-cal, rms=0.132868Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132868Jy sigma=0.000656 ! Fit after self-cal, rms=0.133193Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.466 mas, bpa=-4.406 degrees ! Estimated noise=1292.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307748 Jy ! Component: 100 - total flux cleaned = 0.00441525 Jy ! Component: 150 - total flux cleaned = 0.00502131 Jy ! Component: 200 - total flux cleaned = 0.00525851 Jy ! Total flux subtracted in 200 components = 0.00525851 Jy ! Clean residual min=-0.003933 max=0.003717 Jy/beam ! Clean residual mean=-0.000012 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.359402 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 141 components and 0.359402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133082Jy sigma=0.000655 ! Fit after self-cal, rms=0.133079Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105251 Jy ! Component: 100 - total flux cleaned = 0.00134405 Jy ! Component: 150 - total flux cleaned = 0.00155194 Jy ! Component: 200 - total flux cleaned = 0.00164642 Jy ! Total flux subtracted in 200 components = 0.00164642 Jy ! Clean residual min=-0.003695 max=0.003539 Jy/beam ! Clean residual mean=-0.000001 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.361048 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 148 components and 0.361048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133026Jy sigma=0.000655 ! Fit after self-cal, rms=0.133008Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133008Jy sigma=0.000655 ! Fit after self-cal, rms=0.131823Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.812 mas, bmaj=7.421 mas, bpa=-4.703 degrees ! Estimated noise=1283.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124248 Jy ! Component: 100 - total flux cleaned = 0.00182086 Jy ! Component: 150 - total flux cleaned = 0.0019995 Jy ! Component: 200 - total flux cleaned = 0.00208153 Jy ! Total flux subtracted in 200 components = 0.00208153 Jy ! Clean residual min=-0.003625 max=0.003105 Jy/beam ! Clean residual mean=-0.000016 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.36313 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 157 components and 0.36313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131775Jy sigma=0.000655 ! Fit after self-cal, rms=0.131764Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000575606 Jy ! Component: 100 - total flux cleaned = 0.000660891 Jy ! Component: 150 - total flux cleaned = 0.000737327 Jy ! Component: 200 - total flux cleaned = 0.000773024 Jy ! Total flux subtracted in 200 components = 0.000773024 Jy ! Clean residual min=-0.003515 max=0.003006 Jy/beam ! Clean residual mean=-0.000011 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.363903 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 159 components and 0.363903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131733Jy sigma=0.000655 ! Fit after self-cal, rms=0.131726Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131726Jy sigma=0.000655 ! Fit after self-cal, rms=0.130816Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.915 mas, bmaj=28.59 mas, bpa=-2.585 degrees ! Estimated noise=1738.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158244 Jy ! Component: 100 - total flux cleaned = 0.0020461 Jy ! Component: 150 - total flux cleaned = 0.00210543 Jy ! Component: 200 - total flux cleaned = 0.00210524 Jy ! Total flux subtracted in 200 components = 0.00210524 Jy ! Clean residual min=-0.003968 max=0.003118 Jy/beam ! Clean residual mean=-0.000027 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.366008 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 164 components and 0.366008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130809Jy sigma=0.000655 ! Fit after self-cal, rms=0.130791Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000524008 Jy ! Component: 100 - total flux cleaned = 0.000578529 Jy ! Component: 150 - total flux cleaned = 0.000604458 Jy ! Component: 200 - total flux cleaned = 0.000605286 Jy ! Total flux subtracted in 200 components = 0.000605286 Jy ! Clean residual min=-0.003912 max=0.003196 Jy/beam ! Clean residual mean=-0.000017 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.366613 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 167 components and 0.366613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130786Jy sigma=0.000655 ! Fit after self-cal, rms=0.130781Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.805 mas, bmaj=7.399 mas, bpa=-4.879 degrees ! Estimated noise=1277.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.805 x 7.399 at -4.879 degrees (North through East) ! Clean map min=-0.003281 max=0.15395 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.115 mas, bmaj=6.036 mas, bpa=-6.376 degrees ! Estimated noise=2201.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112884 Jy ! Component: 100 - total flux cleaned = 0.174378 Jy ! Component: 150 - total flux cleaned = 0.215581 Jy ! Component: 200 - total flux cleaned = 0.245688 Jy ! Total flux subtracted in 200 components = 0.245688 Jy ! Clean residual min=-0.010685 max=0.018779 Jy/beam ! Clean residual mean=-0.000335 rms=0.003418 Jy/beam ! Combined flux in latest and established models = 0.245688 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.245688 Jy ! Inverting map and beam ! Estimated beam: bmin=2.805 mas, bmaj=7.399 mas, bpa=-4.879 degrees ! Estimated noise=1277.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380201 Jy ! Component: 100 - total flux cleaned = 0.0589261 Jy ! Component: 150 - total flux cleaned = 0.071606 Jy ! Component: 200 - total flux cleaned = 0.0805221 Jy ! Total flux subtracted in 200 components = 0.0805221 Jy ! Clean residual min=-0.005162 max=0.006612 Jy/beam ! Clean residual mean=-0.000240 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 0.32621 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 115 components and 0.32621 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.915 mas, bmaj=28.59 mas, bpa=-2.585 degrees ! Estimated noise=1738.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125742 Jy ! Component: 100 - total flux cleaned = 0.0207542 Jy ! Component: 150 - total flux cleaned = 0.0262739 Jy ! Component: 200 - total flux cleaned = 0.0300307 Jy ! Total flux subtracted in 200 components = 0.0300307 Jy ! Clean residual min=-0.004566 max=0.005497 Jy/beam ! Clean residual mean=-0.000148 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 0.356241 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155976 Jy ! Component: 100 - total flux cleaned = 0.00224105 Jy ! Component: 150 - total flux cleaned = 0.00278657 Jy ! Component: 200 - total flux cleaned = 0.00337948 Jy ! Total flux subtracted in 200 components = 0.00337948 Jy ! Clean residual min=-0.004295 max=0.004628 Jy/beam ! Clean residual mean=-0.000107 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.359621 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 160 components and 0.359621 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.805 mas, bmaj=7.399 mas, bpa=-4.879 degrees ! Estimated noise=1277.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00161141 Jy ! Component: 100 - total flux cleaned = -0.000857167 Jy ! Component: 150 - total flux cleaned = -0.000179582 Jy ! Component: 200 - total flux cleaned = 0.000429503 Jy ! Total flux subtracted in 200 components = 0.000429503 Jy ! Clean residual min=-0.003835 max=0.003841 Jy/beam ! Clean residual mean=-0.000047 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.36005 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 168 components and 0.36005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130944Jy sigma=0.000655 ! Fit after self-cal, rms=0.130758Jy sigma=0.000655 wmodel J0623-4413_S_2017_03_23_pus_map.mod ! Writing 168 model components to file: J0623-4413_S_2017_03_23_pus_map.mod wobs J0623-4413_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0623-4413_S_2017_03_23_pus_uvs.fits wwins J0623-4413_S_2017_03_23_pus_map.win ! wwins: Wrote 4 windows to J0623-4413_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000512825 Jy ! Component: 100 - total flux cleaned = 0.00073785 Jy ! Component: 150 - total flux cleaned = 0.00100352 Jy ! Component: 200 - total flux cleaned = 0.00120686 Jy ! Component: 250 - total flux cleaned = 0.00149322 Jy ! Component: 300 - total flux cleaned = 0.00158305 Jy ! Component: 350 - total flux cleaned = 0.00162496 Jy ! Component: 400 - total flux cleaned = 0.00166604 Jy ! Component: 450 - total flux cleaned = 0.00162666 Jy ! Component: 500 - total flux cleaned = 0.0014734 Jy ! Component: 550 - total flux cleaned = 0.00151143 Jy ! Component: 600 - total flux cleaned = 0.00151179 Jy ! Component: 650 - total flux cleaned = 0.00158327 Jy ! Component: 700 - total flux cleaned = 0.0016526 Jy ! Component: 750 - total flux cleaned = 0.0017204 Jy ! Component: 800 - total flux cleaned = 0.00175343 Jy ! Component: 850 - total flux cleaned = 0.00185001 Jy ! Component: 900 - total flux cleaned = 0.00188136 Jy ! Component: 950 - total flux cleaned = 0.0019429 Jy ! Component: 1000 - total flux cleaned = 0.00191233 Jy ! Component: 1050 - total flux cleaned = 0.00188355 Jy ! Component: 1100 - total flux cleaned = 0.00185491 Jy ! Component: 1150 - total flux cleaned = 0.00182702 Jy ! Component: 1200 - total flux cleaned = 0.00179931 Jy ! Component: 1250 - total flux cleaned = 0.00179964 Jy ! Component: 1300 - total flux cleaned = 0.00182681 Jy ! Component: 1350 - total flux cleaned = 0.00190643 Jy ! Component: 1400 - total flux cleaned = 0.00195861 Jy ! Component: 1450 - total flux cleaned = 0.00198431 Jy ! Component: 1500 - total flux cleaned = 0.00195897 Jy ! Component: 1550 - total flux cleaned = 0.00190929 Jy ! Component: 1600 - total flux cleaned = 0.00195893 Jy ! Component: 1650 - total flux cleaned = 0.00198328 Jy ! Component: 1700 - total flux cleaned = 0.00198314 Jy ! Component: 1750 - total flux cleaned = 0.00198278 Jy ! Component: 1800 - total flux cleaned = 0.00200613 Jy ! Component: 1850 - total flux cleaned = 0.00198281 Jy ! Component: 1900 - total flux cleaned = 0.00205143 Jy ! Component: 1950 - total flux cleaned = 0.00202887 Jy ! Component: 2000 - total flux cleaned = 0.00209605 Jy ! Component: 2050 - total flux cleaned = 0.00216252 Jy ! Component: 2100 - total flux cleaned = 0.00216253 Jy ! Component: 2150 - total flux cleaned = 0.00222777 Jy ! Component: 2200 - total flux cleaned = 0.0022063 Jy ! Component: 2250 - total flux cleaned = 0.00220663 Jy ! Component: 2300 - total flux cleaned = 0.00222778 Jy ! Component: 2350 - total flux cleaned = 0.00229083 Jy ! Component: 2400 - total flux cleaned = 0.00227 Jy ! Component: 2450 - total flux cleaned = 0.00224929 Jy ! Component: 2500 - total flux cleaned = 0.00226961 Jy ! Component: 2550 - total flux cleaned = 0.00222925 Jy ! Component: 2600 - total flux cleaned = 0.00218916 Jy ! Component: 2650 - total flux cleaned = 0.00220919 Jy ! Component: 2700 - total flux cleaned = 0.00220933 Jy ! Component: 2750 - total flux cleaned = 0.00222875 Jy ! Component: 2800 - total flux cleaned = 0.00228702 Jy ! Component: 2850 - total flux cleaned = 0.00226783 Jy ! Component: 2900 - total flux cleaned = 0.00230618 Jy ! Component: 2950 - total flux cleaned = 0.00234419 Jy ! Component: 3000 - total flux cleaned = 0.00236313 Jy ! Component: 3050 - total flux cleaned = 0.0024196 Jy ! Component: 3100 - total flux cleaned = 0.00253151 Jy ! Component: 3150 - total flux cleaned = 0.00251276 Jy ! Component: 3200 - total flux cleaned = 0.00258651 Jy ! Component: 3250 - total flux cleaned = 0.00264161 Jy ! Component: 3300 - total flux cleaned = 0.00267811 Jy ! Component: 3350 - total flux cleaned = 0.00276871 Jy ! Component: 3400 - total flux cleaned = 0.00278668 Jy ! Component: 3450 - total flux cleaned = 0.00278676 Jy ! Component: 3500 - total flux cleaned = 0.00287612 Jy ! Component: 3550 - total flux cleaned = 0.00284052 Jy ! Component: 3600 - total flux cleaned = 0.00284066 Jy ! Component: 3650 - total flux cleaned = 0.00284071 Jy ! Component: 3700 - total flux cleaned = 0.00289328 Jy ! Component: 3750 - total flux cleaned = 0.0028758 Jy ! Component: 3800 - total flux cleaned = 0.00291051 Jy ! Component: 3850 - total flux cleaned = 0.00291062 Jy ! Component: 3900 - total flux cleaned = 0.00291059 Jy ! Component: 3950 - total flux cleaned = 0.00287629 Jy ! Component: 4000 - total flux cleaned = 0.00284212 Jy ! Component: 4050 - total flux cleaned = 0.00289323 Jy ! Total flux subtracted in 4096 components = 0.00279135 Jy ! Clean residual min=-0.001021 max=0.001158 Jy/beam ! Clean residual mean=0.000000 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.362842 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 415 components and 0.362842 Jy ![Exited script file: muppet] wmap "J0623-4413_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.805 x 7.399 at -4.879 degrees (North through East) ! Clean map min=-0.0023737 max=0.15819 Jy/beam ! Writing clean map to FITS file: J0623-4413_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.158194 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000295045 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.559526 0.559526 1.11905 2.2381 4.47621 8.95241 17.9048 35.8097 71.6193 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.158 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.805 x 7.399 at -4.879 degrees (North through East) ! Clean map min=-0.0023737 max=0.15819 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0623-4413_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:51:16 2019