! Started logfile: J0623+2241_S_2017_05_27_pus_uvs.log on Fri May 3 10:58:37 2019 obs J0623+2241_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0623+2241_S_2017_05_27_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.922605 visibilities/baseline/integration-bin. ! Found source: J0623+2241 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 24080 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0623+2241_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 740 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977032Jy sigma=0.026612 ! Fit after self-cal, rms=0.951702Jy sigma=0.026516 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=6.482 mas, bpa=13.4 degrees ! Estimated noise=544.874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191028 Jy ! Component: 100 - total flux cleaned = 0.0292907 Jy ! Total flux subtracted in 100 components = 0.0292907 Jy ! Clean residual min=-0.006909 max=0.009460 Jy/beam ! Clean residual mean=-0.000021 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.0292907 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0292907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096219Jy sigma=0.000901 ! Fit after self-cal, rms=0.095703Jy sigma=0.000883 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=7.243 mas, bpa=9.429 degrees ! Estimated noise=441.265 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228286 Jy ! Component: 100 - total flux cleaned = 0.0385469 Jy ! Component: 150 - total flux cleaned = 0.050069 Jy ! Component: 200 - total flux cleaned = 0.0585354 Jy ! Total flux subtracted in 200 components = 0.0585354 Jy ! Clean residual min=-0.007559 max=0.010650 Jy/beam ! Clean residual mean=0.000008 rms=0.002585 Jy/beam ! Combined flux in latest and established models = 0.0878262 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 42 components and 0.0878262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086526Jy sigma=0.000908 ! Fit after self-cal, rms=0.085609Jy sigma=0.000901 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 0.82 HN 1.36 KP 0.82 ! LA 0.71 MK 1.02 NL 1.94 OV 1.62 ! PT 0.68 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 0.84 HN 1.43 KP 0.75 ! LA 0.67 MK 1.02 NL 2.06 OV 1.25 ! PT 0.69 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 8.96 FD 0.88 HN 1.51 KP 0.75 ! LA 0.73 MK 1.10 NL 2.03 OV 1.24 ! PT 0.68 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 1.05 KP 1.00* ! LA 0.72 MK 0.74 NL 1.00* OV 1.00* ! PT 0.70 SC 1.00* ! ! ! Fit before self-cal, rms=0.085609Jy sigma=0.000901 ! Fit after self-cal, rms=0.220675Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=8.239 mas, bpa=8.504 degrees ! Estimated noise=516.817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115364 Jy ! Component: 100 - total flux cleaned = 0.00111349 Jy ! Component: 150 - total flux cleaned = 0.00104168 Jy ! Component: 200 - total flux cleaned = 0.00100804 Jy ! Total flux subtracted in 200 components = 0.00100804 Jy ! Clean residual min=-0.003006 max=0.003571 Jy/beam ! Clean residual mean=0.000004 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.0888342 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.0888342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220548Jy sigma=0.000667 ! Fit after self-cal, rms=0.221556Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221556Jy sigma=0.000658 ! Fit after self-cal, rms=0.301283Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=8.44 mas, bpa=6.073 degrees ! Estimated noise=527.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000564558 Jy ! Component: 100 - total flux cleaned = 0.000496736 Jy ! Component: 150 - total flux cleaned = 0.000469005 Jy ! Component: 200 - total flux cleaned = 0.000424405 Jy ! Total flux subtracted in 200 components = 0.000424405 Jy ! Clean residual min=-0.002052 max=0.002099 Jy/beam ! Clean residual mean=0.000001 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0892586 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.0892586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301190Jy sigma=0.000654 ! Fit after self-cal, rms=0.301284Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018971 Jy ! Component: 100 - total flux cleaned = -0.000189836 Jy ! Component: 150 - total flux cleaned = -0.000211877 Jy ! Component: 200 - total flux cleaned = -0.000231676 Jy ! Total flux subtracted in 200 components = -0.000231676 Jy ! Clean residual min=-0.001878 max=0.001915 Jy/beam ! Clean residual mean=0.000002 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0890269 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.0890269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301253Jy sigma=0.000653 ! Fit after self-cal, rms=0.301252Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301252Jy sigma=0.000653 ! Fit after self-cal, rms=0.111680Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=8.386 mas, bpa=5.297 degrees ! Estimated noise=520.012 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.80197e-05 Jy ! Component: 100 - total flux cleaned = 0.000102819 Jy ! Component: 150 - total flux cleaned = 0.000102724 Jy ! Component: 200 - total flux cleaned = 8.47955e-05 Jy ! Total flux subtracted in 200 components = 8.47955e-05 Jy ! Clean residual min=-0.001867 max=0.001962 Jy/beam ! Clean residual mean=-0.000001 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0891117 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.0891117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111657Jy sigma=0.000651 ! Fit after self-cal, rms=0.111596Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.07736e-05 Jy ! Component: 100 - total flux cleaned = 3.22804e-05 Jy ! Component: 150 - total flux cleaned = -3.67266e-06 Jy ! Component: 200 - total flux cleaned = -1.94838e-05 Jy ! Total flux subtracted in 200 components = -1.94838e-05 Jy ! Clean residual min=-0.001949 max=0.001961 Jy/beam ! Clean residual mean=-0.000001 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0890922 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.0890922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111579Jy sigma=0.000651 ! Fit after self-cal, rms=0.111567Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111567Jy sigma=0.000651 ! Fit after self-cal, rms=0.111164Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.411 mas, bmaj=12.11 mas, bpa=-2.182 degrees ! Estimated noise=571.439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426327 Jy ! Component: 100 - total flux cleaned = 0.000470842 Jy ! Component: 150 - total flux cleaned = 0.000522936 Jy ! Component: 200 - total flux cleaned = 0.000557614 Jy ! Total flux subtracted in 200 components = 0.000557614 Jy ! Clean residual min=-0.002268 max=0.002471 Jy/beam ! Clean residual mean=-0.000003 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0896499 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 66 components and 0.0896498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111157Jy sigma=0.000651 ! Fit after self-cal, rms=0.111133Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.68924e-05 Jy ! Component: 100 - total flux cleaned = 0.000111386 Jy ! Component: 150 - total flux cleaned = 0.000151337 Jy ! Component: 200 - total flux cleaned = 0.000169485 Jy ! Total flux subtracted in 200 components = 0.000169485 Jy ! Clean residual min=-0.002244 max=0.002490 Jy/beam ! Clean residual mean=-0.000003 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0898193 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.0898193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111127Jy sigma=0.000651 ! Fit after self-cal, rms=0.111119Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=8.429 mas, bpa=4.441 degrees ! Estimated noise=517.229 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.51 x 8.429 at 4.441 degrees (North through East) ! Clean map min=-0.0018881 max=0.038667 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=7.225 mas, bpa=4.808 degrees ! Estimated noise=943.597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310235 Jy ! Component: 100 - total flux cleaned = 0.0461195 Jy ! Component: 150 - total flux cleaned = 0.0567104 Jy ! Component: 200 - total flux cleaned = 0.0643429 Jy ! Total flux subtracted in 200 components = 0.0643429 Jy ! Clean residual min=-0.003417 max=0.004631 Jy/beam ! Clean residual mean=-0.000004 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.0643429 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0643429 Jy ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=8.429 mas, bpa=4.441 degrees ! Estimated noise=517.229 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00949213 Jy ! Component: 100 - total flux cleaned = 0.0151333 Jy ! Component: 150 - total flux cleaned = 0.0185834 Jy ! Component: 200 - total flux cleaned = 0.0207125 Jy ! Total flux subtracted in 200 components = 0.0207125 Jy ! Clean residual min=-0.002148 max=0.002803 Jy/beam ! Clean residual mean=-0.000001 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0850554 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 61 components and 0.0850554 Jy ! Inverting map ! Added new window around map position (-6, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162208 Jy ! Component: 100 - total flux cleaned = 0.0020222 Jy ! Component: 150 - total flux cleaned = 0.00231551 Jy ! Component: 200 - total flux cleaned = 0.0024488 Jy ! Total flux subtracted in 200 components = 0.0024488 Jy ! Clean residual min=-0.001759 max=0.001980 Jy/beam ! Clean residual mean=0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0875042 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 83 components and 0.0875042 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.411 mas, bmaj=12.11 mas, bpa=-2.182 degrees ! Estimated noise=571.439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000768559 Jy ! Component: 100 - total flux cleaned = 0.000870197 Jy ! Component: 150 - total flux cleaned = 0.000885995 Jy ! Component: 200 - total flux cleaned = 0.000899388 Jy ! Total flux subtracted in 200 components = 0.000899388 Jy ! Clean residual min=-0.002042 max=0.002344 Jy/beam ! Clean residual mean=0.000002 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.0884036 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.36662e-05 Jy ! Component: 100 - total flux cleaned = 4.59222e-05 Jy ! Component: 150 - total flux cleaned = 5.64118e-05 Jy ! Component: 200 - total flux cleaned = 6.62583e-05 Jy ! Total flux subtracted in 200 components = 6.62583e-05 Jy ! Clean residual min=-0.002024 max=0.002348 Jy/beam ! Clean residual mean=0.000002 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0884698 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 107 components and 0.0884698 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=8.429 mas, bpa=4.441 degrees ! Estimated noise=517.229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000609387 Jy ! Component: 100 - total flux cleaned = -0.000583823 Jy ! Component: 150 - total flux cleaned = -0.00056236 Jy ! Component: 200 - total flux cleaned = -0.000541578 Jy ! Total flux subtracted in 200 components = -0.000541578 Jy ! Clean residual min=-0.001708 max=0.001912 Jy/beam ! Clean residual mean=0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0879283 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 126 components and 0.0879283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111003Jy sigma=0.000650 ! Fit after self-cal, rms=0.110723Jy sigma=0.000649 wmodel J0623+2241_S_2017_05_27_pus_map.mod ! Writing 126 model components to file: J0623+2241_S_2017_05_27_pus_map.mod wobs J0623+2241_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0623+2241_S_2017_05_27_pus_uvs.fits wwins J0623+2241_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0623+2241_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185333 Jy ! Component: 100 - total flux cleaned = 0.000480882 Jy ! Component: 150 - total flux cleaned = 0.000542641 Jy ! Component: 200 - total flux cleaned = 0.000630904 Jy ! Component: 250 - total flux cleaned = 0.000687647 Jy ! Component: 300 - total flux cleaned = 0.000742086 Jy ! Component: 350 - total flux cleaned = 0.00074299 Jy ! Component: 400 - total flux cleaned = 0.000743444 Jy ! Component: 450 - total flux cleaned = 0.000598418 Jy ! Component: 500 - total flux cleaned = 0.0004807 Jy ! Component: 550 - total flux cleaned = 0.000273286 Jy ! Component: 600 - total flux cleaned = 0.000182875 Jy ! Component: 650 - total flux cleaned = 9.37766e-05 Jy ! Component: 700 - total flux cleaned = 2.8342e-05 Jy ! Component: 750 - total flux cleaned = 6.98157e-06 Jy ! Component: 800 - total flux cleaned = 2.76194e-05 Jy ! Component: 850 - total flux cleaned = -3.40239e-05 Jy ! Component: 900 - total flux cleaned = -7.44791e-05 Jy ! Component: 950 - total flux cleaned = -7.44377e-05 Jy ! Component: 1000 - total flux cleaned = -0.000113693 Jy ! Component: 1050 - total flux cleaned = -7.5056e-05 Jy ! Component: 1100 - total flux cleaned = -0.000170334 Jy ! Component: 1150 - total flux cleaned = -7.57553e-05 Jy ! Component: 1200 - total flux cleaned = -9.39324e-05 Jy ! Component: 1250 - total flux cleaned = -5.73616e-05 Jy ! Component: 1300 - total flux cleaned = -9.35706e-05 Jy ! Component: 1350 - total flux cleaned = -4.07771e-06 Jy ! Component: 1400 - total flux cleaned = 1.34038e-05 Jy ! Component: 1450 - total flux cleaned = -5.65146e-05 Jy ! Component: 1500 - total flux cleaned = -2.17285e-05 Jy ! Component: 1550 - total flux cleaned = -4.73788e-06 Jy ! Component: 1600 - total flux cleaned = -5.52726e-05 Jy ! Component: 1650 - total flux cleaned = -5.4953e-05 Jy ! Component: 1700 - total flux cleaned = -5.50151e-05 Jy ! Component: 1750 - total flux cleaned = -2.24092e-05 Jy ! Component: 1800 - total flux cleaned = -2.25997e-05 Jy ! Component: 1850 - total flux cleaned = -6.69335e-06 Jy ! Component: 1900 - total flux cleaned = -6.63655e-06 Jy ! Component: 1950 - total flux cleaned = 4.04565e-05 Jy ! Component: 2000 - total flux cleaned = 2.46791e-05 Jy ! Component: 2050 - total flux cleaned = 9.46376e-06 Jy ! Component: 2100 - total flux cleaned = 8.54341e-05 Jy ! Component: 2150 - total flux cleaned = 5.51448e-05 Jy ! Component: 2200 - total flux cleaned = 7.00938e-05 Jy ! Component: 2250 - total flux cleaned = 4.0508e-05 Jy ! Component: 2300 - total flux cleaned = 1.13165e-05 Jy ! Component: 2350 - total flux cleaned = 4.02709e-05 Jy ! Component: 2400 - total flux cleaned = 5.44968e-05 Jy ! Component: 2450 - total flux cleaned = 1.16846e-05 Jy ! Component: 2500 - total flux cleaned = 5.4049e-05 Jy ! Component: 2550 - total flux cleaned = -1.86705e-06 Jy ! Component: 2600 - total flux cleaned = 3.98464e-05 Jy ! Component: 2650 - total flux cleaned = 1.23932e-05 Jy ! Component: 2700 - total flux cleaned = 1.24106e-05 Jy ! Component: 2750 - total flux cleaned = -1.2551e-06 Jy ! Component: 2800 - total flux cleaned = -1.47519e-05 Jy ! Component: 2850 - total flux cleaned = 6.51912e-05 Jy ! Component: 2900 - total flux cleaned = 7.82629e-05 Jy ! Component: 2950 - total flux cleaned = 0.000130721 Jy ! Component: 3000 - total flux cleaned = 0.000117718 Jy ! Component: 3050 - total flux cleaned = 0.000182492 Jy ! Component: 3100 - total flux cleaned = 0.000195266 Jy ! Component: 3150 - total flux cleaned = 0.000233538 Jy ! Component: 3200 - total flux cleaned = 0.000233449 Jy ! Component: 3250 - total flux cleaned = 0.0003089 Jy ! Component: 3300 - total flux cleaned = 0.000358664 Jy ! Component: 3350 - total flux cleaned = 0.000321426 Jy ! Component: 3400 - total flux cleaned = 0.000419887 Jy ! Component: 3450 - total flux cleaned = 0.00040759 Jy ! Component: 3500 - total flux cleaned = 0.000407577 Jy ! Component: 3550 - total flux cleaned = 0.00043185 Jy ! Component: 3600 - total flux cleaned = 0.0004679 Jy ! Component: 3650 - total flux cleaned = 0.000491813 Jy ! Component: 3700 - total flux cleaned = 0.000574568 Jy ! Component: 3750 - total flux cleaned = 0.000586382 Jy ! Component: 3800 - total flux cleaned = 0.000609786 Jy ! Component: 3850 - total flux cleaned = 0.000633165 Jy ! Component: 3900 - total flux cleaned = 0.000702357 Jy ! Component: 3950 - total flux cleaned = 0.000690884 Jy ! Component: 4000 - total flux cleaned = 0.000725283 Jy ! Component: 4050 - total flux cleaned = 0.000748063 Jy ! Total flux subtracted in 4096 components = 0.000815817 Jy ! Clean residual min=-0.000626 max=0.000714 Jy/beam ! Clean residual mean=0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.0887441 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 408 components and 0.0887441 Jy ![Exited script file: muppet] wmap "J0623+2241_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.51 x 8.429 at 4.441 degrees (North through East) ! Clean map min=-0.0019882 max=0.039031 Jy/beam ! Writing clean map to FITS file: J0623+2241_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0390315 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205412 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.57882 1.57882 3.15764 6.31527 12.6305 25.2611 50.5222 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.039 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.51 x 8.429 at 4.441 degrees (North through East) ! Clean map min=-0.0019882 max=0.039031 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0623+2241_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:58:43 2019