! Started logfile: J0622-1927_S_2017_05_27_pus_uvs.log on Fri May 3 10:58:31 2019 obs J0622-1927_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0622-1927_S_2017_05_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.979532 visibilities/baseline/integration-bin. ! Found source: J0622-1927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 20100 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0622-1927_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 585 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.851542Jy sigma=0.067782 ! Fit after self-cal, rms=0.846745Jy sigma=0.067728 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=6.446 mas, bpa=-1.633 degrees ! Estimated noise=528.593 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503259 Jy ! Component: 100 - total flux cleaned = 0.0488202 Jy ! Total flux subtracted in 100 components = 0.0488202 Jy ! Clean residual min=-0.017083 max=0.031298 Jy/beam ! Clean residual mean=-0.000043 rms=0.006318 Jy/beam ! Combined flux in latest and established models = 0.0488202 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0488202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186611Jy sigma=0.003473 ! Fit after self-cal, rms=0.186506Jy sigma=0.003469 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.938 mas, bmaj=7.821 mas, bpa=-0.1587 degrees ! Estimated noise=252.268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000729827 Jy ! Component: 100 - total flux cleaned = 0.000735534 Jy ! Component: 150 - total flux cleaned = 0.00128463 Jy ! Component: 200 - total flux cleaned = 0.00176149 Jy ! Total flux subtracted in 200 components = 0.00176149 Jy ! Clean residual min=-0.016648 max=0.029366 Jy/beam ! Clean residual mean=-0.000058 rms=0.006354 Jy/beam ! Combined flux in latest and established models = 0.0505817 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.0505817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185518Jy sigma=0.003301 ! Fit after self-cal, rms=0.185252Jy sigma=0.003301 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 12.97 FD 0.47 HN 0.70 KP 0.56 ! LA 0.52 MK 0.86 NL 0.50 OV 0.56 ! PT 0.56 SC 0.50 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 23.80 FD 0.55 HN 0.79 KP 0.55 ! LA 0.56 MK 0.83 NL 0.65 OV 0.60 ! PT 0.56 SC 0.60 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 27.09 FD 0.51 HN 0.71 KP 0.55 ! LA 0.53 MK 0.85 NL 0.59 OV 0.51 ! PT 0.54 SC 0.53 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.53 HN 0.72 KP 1.00* ! LA 0.47 MK 0.90 NL 1.00* OV 1.00* ! PT 0.54 SC 1.00* ! ! ! Fit before self-cal, rms=0.185252Jy sigma=0.003301 ! Fit after self-cal, rms=1.333895Jy sigma=0.000893 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=8.494 mas, bpa=-1.238 degrees ! Estimated noise=308.944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0064678 Jy ! Component: 100 - total flux cleaned = 0.00646267 Jy ! Component: 150 - total flux cleaned = 0.00646344 Jy ! Component: 200 - total flux cleaned = 0.0066031 Jy ! Total flux subtracted in 200 components = 0.0066031 Jy ! Clean residual min=-0.006498 max=0.003744 Jy/beam ! Clean residual mean=0.000018 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.0571848 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.0571848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.331800Jy sigma=0.000893 ! Fit after self-cal, rms=1.331832Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.331832Jy sigma=0.000788 ! Fit after self-cal, rms=1.511967Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=8.439 mas, bpa=-3.12 degrees ! Estimated noise=311.258 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526643 Jy ! Component: 100 - total flux cleaned = 0.0056105 Jy ! Component: 150 - total flux cleaned = 0.00581382 Jy ! Component: 200 - total flux cleaned = 0.00609045 Jy ! Total flux subtracted in 200 components = 0.00609045 Jy ! Clean residual min=-0.004989 max=0.002916 Jy/beam ! Clean residual mean=0.000014 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.0632753 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.0632753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.510555Jy sigma=0.000766 ! Fit after self-cal, rms=1.510555Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243841 Jy ! Component: 100 - total flux cleaned = 0.000316713 Jy ! Component: 150 - total flux cleaned = 0.000384647 Jy ! Component: 200 - total flux cleaned = 0.000446794 Jy ! Total flux subtracted in 200 components = 0.000446794 Jy ! Clean residual min=-0.004874 max=0.002903 Jy/beam ! Clean residual mean=0.000015 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.0637221 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.0637221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.510214Jy sigma=0.000766 ! Fit after self-cal, rms=1.510216Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.510216Jy sigma=0.000766 ! Fit after self-cal, rms=1.538437Jy sigma=0.000737 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=8.346 mas, bpa=-3.464 degrees ! Estimated noise=327.157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355467 Jy ! Component: 100 - total flux cleaned = 0.00386375 Jy ! Component: 150 - total flux cleaned = 0.0040617 Jy ! Component: 200 - total flux cleaned = 0.00423448 Jy ! Total flux subtracted in 200 components = 0.00423448 Jy ! Clean residual min=-0.003356 max=0.002007 Jy/beam ! Clean residual mean=0.000008 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.0679565 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0679565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.537680Jy sigma=0.000739 ! Fit after self-cal, rms=1.537678Jy sigma=0.000738 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105082 Jy ! Component: 100 - total flux cleaned = 0.000244426 Jy ! Component: 150 - total flux cleaned = 0.000325698 Jy ! Component: 200 - total flux cleaned = 0.000363216 Jy ! Total flux subtracted in 200 components = 0.000363216 Jy ! Clean residual min=-0.003349 max=0.001984 Jy/beam ! Clean residual mean=0.000009 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.0683197 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.0683198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.537497Jy sigma=0.000739 ! Fit after self-cal, rms=1.537498Jy sigma=0.000739 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.537498Jy sigma=0.000739 ! Fit after self-cal, rms=1.655558Jy sigma=0.000735 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.706 mas, bmaj=16.96 mas, bpa=-2.149 degrees ! Estimated noise=412.512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420216 Jy ! Component: 100 - total flux cleaned = 0.00451507 Jy ! Component: 150 - total flux cleaned = 0.00438802 Jy ! Component: 200 - total flux cleaned = 0.00432999 Jy ! Total flux subtracted in 200 components = 0.00432999 Jy ! Clean residual min=-0.004719 max=0.002200 Jy/beam ! Clean residual mean=0.000016 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.0726497 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.0726497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.654754Jy sigma=0.000738 ! Fit after self-cal, rms=1.654754Jy sigma=0.000738 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.32841e-05 Jy ! Component: 100 - total flux cleaned = -0.000106554 Jy ! Component: 150 - total flux cleaned = -0.000200425 Jy ! Component: 200 - total flux cleaned = -0.000244555 Jy ! Total flux subtracted in 200 components = -0.000244555 Jy ! Clean residual min=-0.004639 max=0.002314 Jy/beam ! Clean residual mean=0.000015 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.0724052 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.0724052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.654568Jy sigma=0.000740 ! Fit after self-cal, rms=1.654570Jy sigma=0.000740 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=8.329 mas, bpa=-3.833 degrees ! Estimated noise=344.971 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.322 x 8.329 at -3.833 degrees (North through East) ! Clean map min=-0.0032952 max=0.076679 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=6.721 mas, bpa=-5.27 degrees ! Estimated noise=600.087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0606382 Jy ! Component: 100 - total flux cleaned = 0.0739583 Jy ! Component: 150 - total flux cleaned = 0.0749107 Jy ! Component: 200 - total flux cleaned = 0.0745648 Jy ! Total flux subtracted in 200 components = 0.0745648 Jy ! Clean residual min=-0.004159 max=0.003182 Jy/beam ! Clean residual mean=0.000007 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.0745648 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0745648 Jy ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=8.329 mas, bpa=-3.833 degrees ! Estimated noise=344.971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155382 Jy ! Component: 100 - total flux cleaned = -0.00163998 Jy ! Component: 150 - total flux cleaned = -0.0016757 Jy ! Component: 200 - total flux cleaned = -0.00167556 Jy ! Total flux subtracted in 200 components = -0.00167556 Jy ! Clean residual min=-0.003573 max=0.002189 Jy/beam ! Clean residual mean=0.000009 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.0728893 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.0728893 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.706 mas, bmaj=16.96 mas, bpa=-2.149 degrees ! Estimated noise=412.512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000542747 Jy ! Component: 100 - total flux cleaned = -0.000600778 Jy ! Component: 150 - total flux cleaned = -0.00060662 Jy ! Component: 200 - total flux cleaned = -0.000654073 Jy ! Total flux subtracted in 200 components = -0.000654073 Jy ! Clean residual min=-0.004682 max=0.002292 Jy/beam ! Clean residual mean=0.000014 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.0722352 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.06801e-05 Jy ! Component: 100 - total flux cleaned = -7.85696e-05 Jy ! Component: 150 - total flux cleaned = -0.000114438 Jy ! Component: 200 - total flux cleaned = -0.000148612 Jy ! Total flux subtracted in 200 components = -0.000148612 Jy ! Clean residual min=-0.004621 max=0.002382 Jy/beam ! Clean residual mean=0.000014 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.0720866 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.0720866 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=8.329 mas, bpa=-3.833 degrees ! Estimated noise=344.971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479544 Jy ! Component: 100 - total flux cleaned = 0.000544356 Jy ! Component: 150 - total flux cleaned = 0.000594116 Jy ! Component: 200 - total flux cleaned = 0.000629469 Jy ! Total flux subtracted in 200 components = 0.000629469 Jy ! Clean residual min=-0.003522 max=0.002497 Jy/beam ! Clean residual mean=0.000008 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.072716 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.072716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.654398Jy sigma=0.000741 ! Fit after self-cal, rms=1.654398Jy sigma=0.000741 wmodel J0622-1927_S_2017_05_27_pus_map.mod ! Writing 43 model components to file: J0622-1927_S_2017_05_27_pus_map.mod wobs J0622-1927_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0622-1927_S_2017_05_27_pus_uvs.fits wwins J0622-1927_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0622-1927_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157709 Jy ! Component: 100 - total flux cleaned = -0.00296137 Jy ! Component: 150 - total flux cleaned = -0.00412285 Jy ! Component: 200 - total flux cleaned = -0.00501598 Jy ! Component: 250 - total flux cleaned = -0.0058144 Jy ! Component: 300 - total flux cleaned = -0.00665724 Jy ! Component: 350 - total flux cleaned = -0.00734619 Jy ! Component: 400 - total flux cleaned = -0.00789664 Jy ! Component: 450 - total flux cleaned = -0.00835743 Jy ! Component: 500 - total flux cleaned = -0.00880872 Jy ! Component: 550 - total flux cleaned = -0.00914104 Jy ! Component: 600 - total flux cleaned = -0.00957688 Jy ! Component: 650 - total flux cleaned = -0.00989821 Jy ! Component: 700 - total flux cleaned = -0.0103198 Jy ! Component: 750 - total flux cleaned = -0.0107353 Jy ! Component: 800 - total flux cleaned = -0.0111786 Jy ! Component: 850 - total flux cleaned = -0.0115483 Jy ! Component: 900 - total flux cleaned = -0.0119462 Jy ! Component: 950 - total flux cleaned = -0.0123062 Jy ! Component: 1000 - total flux cleaned = -0.0127256 Jy ! Component: 1050 - total flux cleaned = -0.0131077 Jy ! Component: 1100 - total flux cleaned = -0.0134532 Jy ! Component: 1150 - total flux cleaned = -0.0138564 Jy ! Component: 1200 - total flux cleaned = -0.0142237 Jy ! Component: 1250 - total flux cleaned = -0.0145862 Jy ! Component: 1300 - total flux cleaned = -0.0149143 Jy ! Component: 1350 - total flux cleaned = -0.0152089 Jy ! Component: 1400 - total flux cleaned = -0.0155286 Jy ! Component: 1450 - total flux cleaned = -0.0158161 Jy ! Component: 1500 - total flux cleaned = -0.0161283 Jy ! Component: 1550 - total flux cleaned = -0.0162968 Jy ! Component: 1600 - total flux cleaned = -0.0166302 Jy ! Component: 1650 - total flux cleaned = -0.0168504 Jy ! Component: 1700 - total flux cleaned = -0.0170952 Jy ! Component: 1750 - total flux cleaned = -0.0173643 Jy ! Component: 1800 - total flux cleaned = -0.0175771 Jy ! Component: 1850 - total flux cleaned = -0.0178141 Jy ! Component: 1900 - total flux cleaned = -0.0180747 Jy ! Component: 1950 - total flux cleaned = -0.0182807 Jy ! Component: 2000 - total flux cleaned = -0.0184596 Jy ! Component: 2050 - total flux cleaned = -0.0187877 Jy ! Component: 2100 - total flux cleaned = -0.0190623 Jy ! Component: 2150 - total flux cleaned = -0.019285 Jy ! Component: 2200 - total flux cleaned = -0.0195054 Jy ! Component: 2250 - total flux cleaned = -0.0197482 Jy ! Component: 2300 - total flux cleaned = -0.0199406 Jy ! Component: 2350 - total flux cleaned = -0.0202027 Jy ! Component: 2400 - total flux cleaned = -0.0204153 Jy ! Component: 2450 - total flux cleaned = -0.0206724 Jy ! Component: 2500 - total flux cleaned = -0.0209502 Jy ! Component: 2550 - total flux cleaned = -0.0211568 Jy ! Component: 2600 - total flux cleaned = -0.0213842 Jy ! Component: 2650 - total flux cleaned = -0.0216775 Jy ! Component: 2700 - total flux cleaned = -0.0219234 Jy ! Component: 2750 - total flux cleaned = -0.0221445 Jy ! Component: 2800 - total flux cleaned = -0.0223859 Jy ! Component: 2850 - total flux cleaned = -0.0226032 Jy ! Component: 2900 - total flux cleaned = -0.0227968 Jy ! Component: 2950 - total flux cleaned = -0.023053 Jy ! Component: 3000 - total flux cleaned = -0.0232433 Jy ! Component: 3050 - total flux cleaned = -0.0233899 Jy ! Component: 3100 - total flux cleaned = -0.0235982 Jy ! Component: 3150 - total flux cleaned = -0.0237841 Jy ! Component: 3200 - total flux cleaned = -0.0239479 Jy ! Component: 3250 - total flux cleaned = -0.0241511 Jy ! Component: 3300 - total flux cleaned = -0.0243122 Jy ! Component: 3350 - total flux cleaned = -0.024492 Jy ! Component: 3400 - total flux cleaned = -0.0246305 Jy ! Component: 3450 - total flux cleaned = -0.0247291 Jy ! Component: 3500 - total flux cleaned = -0.0248853 Jy ! Component: 3550 - total flux cleaned = -0.0250209 Jy ! Component: 3600 - total flux cleaned = -0.025117 Jy ! Component: 3650 - total flux cleaned = -0.0252126 Jy ! Component: 3700 - total flux cleaned = -0.0253074 Jy ! Component: 3750 - total flux cleaned = -0.0254392 Jy ! Component: 3800 - total flux cleaned = -0.0254392 Jy ! Component: 3850 - total flux cleaned = -0.025625 Jy ! Component: 3900 - total flux cleaned = -0.0256987 Jy ! Component: 3950 - total flux cleaned = -0.0258084 Jy ! Component: 4000 - total flux cleaned = -0.0258267 Jy ! Component: 4050 - total flux cleaned = -0.0260075 Jy ! Total flux subtracted in 4096 components = -0.0260255 Jy ! Clean residual min=-0.001109 max=0.000994 Jy/beam ! Clean residual mean=-0.000000 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.0466905 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 297 components and 0.0466905 Jy ![Exited script file: muppet] wmap "J0622-1927_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.322 x 8.329 at -3.833 degrees (North through East) ! Clean map min=-0.0025634 max=0.081871 Jy/beam ! Writing clean map to FITS file: J0622-1927_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0818707 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000323027 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.18367 1.18367 2.36734 4.73469 9.46938 18.9388 37.8775 75.755 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.322 x 8.329 at -3.833 degrees (North through East) ! Clean map min=-0.0025634 max=0.081871 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0622-1927_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:58:37 2019