! Started logfile: J0622-0109_S_2017_06_15_pus_uvs.log on Tue May 7 15:12:38 2019 obs J0622-0109_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0622-0109_S_2017_06_15_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.915222 visibilities/baseline/integration-bin. ! Found source: J0622-0109 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 28500 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0622-0109_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 961 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.886501Jy sigma=0.007467 ! Fit after self-cal, rms=0.878119Jy sigma=0.007402 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=7.099 mas, bpa=-3.86 degrees ! Estimated noise=765.599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0983419 Jy ! Component: 100 - total flux cleaned = 0.12049 Jy ! Total flux subtracted in 100 components = 0.12049 Jy ! Clean residual min=-0.006696 max=0.022087 Jy/beam ! Clean residual mean=0.000009 rms=0.001942 Jy/beam ! Combined flux in latest and established models = 0.12049 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.12049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091438Jy sigma=0.000740 ! Fit after self-cal, rms=0.091441Jy sigma=0.000740 ! Inverting map ! Added new window around map position (4.5, -37). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196666 Jy ! Component: 100 - total flux cleaned = 0.0296399 Jy ! Total flux subtracted in 100 components = 0.0296399 Jy ! Clean residual min=-0.003930 max=0.007007 Jy/beam ! Clean residual mean=0.000014 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.15013 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 0.15013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087115Jy sigma=0.000700 ! Fit after self-cal, rms=0.086921Jy sigma=0.000698 ! Inverting map ! Added new window around map position (-12, -55). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00836897 Jy ! Component: 100 - total flux cleaned = 0.0145973 Jy ! Total flux subtracted in 100 components = 0.0145973 Jy ! Clean residual min=-0.003420 max=0.005101 Jy/beam ! Clean residual mean=0.000010 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.164727 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 48 components and 0.164727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085897Jy sigma=0.000689 ! Fit after self-cal, rms=0.085875Jy sigma=0.000689 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.178 mas, bpa=-4.463 degrees ! Estimated noise=575.884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -45.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00788889 Jy ! Component: 100 - total flux cleaned = 0.0134964 Jy ! Component: 150 - total flux cleaned = 0.0180404 Jy ! Component: 200 - total flux cleaned = 0.0218098 Jy ! Total flux subtracted in 200 components = 0.0218098 Jy ! Clean residual min=-0.002801 max=0.003554 Jy/beam ! Clean residual mean=0.000009 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.186537 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 114 components and 0.186537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084899Jy sigma=0.000680 ! Fit after self-cal, rms=0.084848Jy sigma=0.000679 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 0.96 KP 1.02 ! LA 0.97 MK 1.05 NL 0.89 OV 1.01 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.96 HN 0.98 KP 0.99 ! LA 0.95 MK 1.01 NL 1.05 OV 1.02 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.98 HN 0.99 KP 0.97 ! LA 0.96 MK 1.08 NL 0.99 OV 0.93 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.94 KP 1.00* ! LA 0.94 MK 0.99 NL 1.00* OV 1.00* ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.084848Jy sigma=0.000679 ! Fit after self-cal, rms=0.082280Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.242 mas, bpa=-4.451 degrees ! Estimated noise=564.959 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332756 Jy ! Component: 100 - total flux cleaned = 0.00560981 Jy ! Component: 150 - total flux cleaned = 0.00733709 Jy ! Component: 200 - total flux cleaned = 0.00868395 Jy ! Total flux subtracted in 200 components = 0.00868395 Jy ! Clean residual min=-0.001857 max=0.001750 Jy/beam ! Clean residual mean=0.000002 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.195221 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 159 components and 0.195221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082118Jy sigma=0.000674 ! Fit after self-cal, rms=0.082089Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082089Jy sigma=0.000674 ! Fit after self-cal, rms=0.082317Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=8.262 mas, bpa=-4.476 degrees ! Estimated noise=565.632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145671 Jy ! Component: 100 - total flux cleaned = 0.00253415 Jy ! Component: 150 - total flux cleaned = 0.00337552 Jy ! Component: 200 - total flux cleaned = 0.00403902 Jy ! Total flux subtracted in 200 components = 0.00403902 Jy ! Clean residual min=-0.001535 max=0.001790 Jy/beam ! Clean residual mean=-0.000001 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.19926 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 179 components and 0.19926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082282Jy sigma=0.000672 ! Fit after self-cal, rms=0.082303Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-60.5, 37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140084 Jy ! Component: 100 - total flux cleaned = 0.00170636 Jy ! Component: 150 - total flux cleaned = 0.0019722 Jy ! Component: 200 - total flux cleaned = 0.00221684 Jy ! Total flux subtracted in 200 components = 0.00221684 Jy ! Clean residual min=-0.001427 max=0.001538 Jy/beam ! Clean residual mean=-0.000002 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.201477 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 195 components and 0.201477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082277Jy sigma=0.000671 ! Fit after self-cal, rms=0.082276Jy sigma=0.000671 ! Inverting map ! Added new window around map position (30, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693828 Jy ! Component: 100 - total flux cleaned = 0.000868752 Jy ! Component: 150 - total flux cleaned = 0.00108093 Jy ! Component: 200 - total flux cleaned = 0.00124501 Jy ! Total flux subtracted in 200 components = 0.00124501 Jy ! Clean residual min=-0.001333 max=0.001395 Jy/beam ! Clean residual mean=-0.000002 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.202722 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 214 components and 0.202722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082250Jy sigma=0.000671 ! Fit after self-cal, rms=0.082246Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082246Jy sigma=0.000671 ! Fit after self-cal, rms=0.082363Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.266 mas, bpa=-4.501 degrees ! Estimated noise=565.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00064158 Jy ! Component: 100 - total flux cleaned = 0.00111622 Jy ! Component: 150 - total flux cleaned = 0.0013338 Jy ! Component: 200 - total flux cleaned = 0.00146719 Jy ! Total flux subtracted in 200 components = 0.00146719 Jy ! Clean residual min=-0.001390 max=0.001327 Jy/beam ! Clean residual mean=-0.000001 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.204189 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 236 components and 0.204189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082354Jy sigma=0.000671 ! Fit after self-cal, rms=0.082361Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206635 Jy ! Component: 100 - total flux cleaned = 0.00029844 Jy ! Component: 150 - total flux cleaned = 0.000399129 Jy ! Component: 200 - total flux cleaned = 0.000454 Jy ! Total flux subtracted in 200 components = 0.000454 Jy ! Clean residual min=-0.001385 max=0.001334 Jy/beam ! Clean residual mean=-0.000001 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.204643 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 255 components and 0.204643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082357Jy sigma=0.000671 ! Fit after self-cal, rms=0.082356Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082356Jy sigma=0.000671 ! Fit after self-cal, rms=0.082401Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.555 mas, bmaj=13.63 mas, bpa=-5.754 degrees ! Estimated noise=703.989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000565142 Jy ! Component: 100 - total flux cleaned = 0.000743879 Jy ! Component: 150 - total flux cleaned = 0.000859792 Jy ! Component: 200 - total flux cleaned = 0.000978419 Jy ! Total flux subtracted in 200 components = 0.000978419 Jy ! Clean residual min=-0.001529 max=0.001369 Jy/beam ! Clean residual mean=-0.000002 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.205622 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 273 components and 0.205622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082398Jy sigma=0.000671 ! Fit after self-cal, rms=0.082401Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.40254e-05 Jy ! Component: 100 - total flux cleaned = 0.000139194 Jy ! Component: 150 - total flux cleaned = 0.000211261 Jy ! Component: 200 - total flux cleaned = 0.000267531 Jy ! Total flux subtracted in 200 components = 0.000267531 Jy ! Clean residual min=-0.001483 max=0.001364 Jy/beam ! Clean residual mean=-0.000003 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.205889 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 286 components and 0.205889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082400Jy sigma=0.000671 ! Fit after self-cal, rms=0.082400Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=8.268 mas, bpa=-4.51 degrees ! Estimated noise=565.712 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.216 x 8.268 at -4.51 degrees (North through East) ! Clean map min=-0.0012958 max=0.12703 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=7.177 mas, bpa=-3.95 degrees ! Estimated noise=758.125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0970728 Jy ! Component: 100 - total flux cleaned = 0.124486 Jy ! Component: 150 - total flux cleaned = 0.139427 Jy ! Component: 200 - total flux cleaned = 0.149524 Jy ! Total flux subtracted in 200 components = 0.149524 Jy ! Clean residual min=-0.003900 max=0.005820 Jy/beam ! Clean residual mean=0.000008 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.149524 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.149524 Jy ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=8.268 mas, bpa=-4.51 degrees ! Estimated noise=565.712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00952274 Jy ! Component: 100 - total flux cleaned = 0.0166773 Jy ! Component: 150 - total flux cleaned = 0.0223527 Jy ! Component: 200 - total flux cleaned = 0.0269323 Jy ! Total flux subtracted in 200 components = 0.0269323 Jy ! Clean residual min=-0.002590 max=0.003124 Jy/beam ! Clean residual mean=0.000004 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.176456 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 68 components and 0.176456 Jy ! Inverting map ! Added new window around map position (-35.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381809 Jy ! Component: 100 - total flux cleaned = 0.00700906 Jy ! Component: 150 - total flux cleaned = 0.00973391 Jy ! Component: 200 - total flux cleaned = 0.0120781 Jy ! Total flux subtracted in 200 components = 0.0120781 Jy ! Clean residual min=-0.002007 max=0.001746 Jy/beam ! Clean residual mean=0.000002 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.188534 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 121 components and 0.188534 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.555 mas, bmaj=13.63 mas, bpa=-5.754 degrees ! Estimated noise=703.989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350665 Jy ! Component: 100 - total flux cleaned = 0.00603994 Jy ! Component: 150 - total flux cleaned = 0.00800181 Jy ! Component: 200 - total flux cleaned = 0.00961478 Jy ! Total flux subtracted in 200 components = 0.00961478 Jy ! Clean residual min=-0.001957 max=0.001488 Jy/beam ! Clean residual mean=0.000001 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.198149 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013688 Jy ! Component: 100 - total flux cleaned = 0.00253737 Jy ! Component: 150 - total flux cleaned = 0.0034243 Jy ! Component: 200 - total flux cleaned = 0.00398575 Jy ! Total flux subtracted in 200 components = 0.00398575 Jy ! Clean residual min=-0.001766 max=0.001345 Jy/beam ! Clean residual mean=-0.000001 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.202135 Jy ! Adding 115 model components to the UV plane model. ! The established model now contains 225 components and 0.202135 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=8.268 mas, bpa=-4.51 degrees ! Estimated noise=565.712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000460032 Jy ! Component: 100 - total flux cleaned = 0.00102239 Jy ! Component: 150 - total flux cleaned = 0.00139365 Jy ! Component: 200 - total flux cleaned = 0.00170278 Jy ! Total flux subtracted in 200 components = 0.00170278 Jy ! Clean residual min=-0.001530 max=0.001275 Jy/beam ! Clean residual mean=-0.000001 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.203838 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 251 components and 0.203838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082424Jy sigma=0.000671 ! Fit after self-cal, rms=0.082414Jy sigma=0.000671 wmodel J0622-0109_S_2017_06_15_pus_map.mod ! Writing 251 model components to file: J0622-0109_S_2017_06_15_pus_map.mod wobs J0622-0109_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0622-0109_S_2017_06_15_pus_uvs.fits wwins J0622-0109_S_2017_06_15_pus_map.win ! wwins: Wrote 7 windows to J0622-0109_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203775 Jy ! Component: 100 - total flux cleaned = -8.67809e-05 Jy ! Component: 150 - total flux cleaned = -6.48954e-05 Jy ! Component: 200 - total flux cleaned = -2.19318e-05 Jy ! Component: 250 - total flux cleaned = -2.12407e-05 Jy ! Component: 300 - total flux cleaned = 5.92216e-05 Jy ! Component: 350 - total flux cleaned = 0.000117378 Jy ! Component: 400 - total flux cleaned = 0.000117184 Jy ! Component: 450 - total flux cleaned = 0.000154539 Jy ! Component: 500 - total flux cleaned = 0.000191058 Jy ! Component: 550 - total flux cleaned = 0.000208641 Jy ! Component: 600 - total flux cleaned = 0.000208306 Jy ! Component: 650 - total flux cleaned = 0.000191402 Jy ! Component: 700 - total flux cleaned = 0.000224799 Jy ! Component: 750 - total flux cleaned = 0.000240984 Jy ! Component: 800 - total flux cleaned = 0.000240928 Jy ! Component: 850 - total flux cleaned = 0.000224933 Jy ! Component: 900 - total flux cleaned = 0.000271441 Jy ! Component: 950 - total flux cleaned = 0.000302061 Jy ! Component: 1000 - total flux cleaned = 0.000302165 Jy ! Component: 1050 - total flux cleaned = 0.000361783 Jy ! Component: 1100 - total flux cleaned = 0.000391231 Jy ! Component: 1150 - total flux cleaned = 0.000391021 Jy ! Component: 1200 - total flux cleaned = 0.000476659 Jy ! Component: 1250 - total flux cleaned = 0.000476326 Jy ! Component: 1300 - total flux cleaned = 0.000532233 Jy ! Component: 1350 - total flux cleaned = 0.000573524 Jy ! Component: 1400 - total flux cleaned = 0.000573465 Jy ! Component: 1450 - total flux cleaned = 0.000600509 Jy ! Component: 1500 - total flux cleaned = 0.000640414 Jy ! Component: 1550 - total flux cleaned = 0.000640501 Jy ! Component: 1600 - total flux cleaned = 0.000640465 Jy ! Component: 1650 - total flux cleaned = 0.000614869 Jy ! Component: 1700 - total flux cleaned = 0.000640561 Jy ! Component: 1750 - total flux cleaned = 0.000640426 Jy ! Component: 1800 - total flux cleaned = 0.000640247 Jy ! Component: 1850 - total flux cleaned = 0.000640172 Jy ! Component: 1900 - total flux cleaned = 0.00059125 Jy ! Component: 1950 - total flux cleaned = 0.000591274 Jy ! Component: 2000 - total flux cleaned = 0.00060313 Jy ! Component: 2050 - total flux cleaned = 0.000555706 Jy ! Component: 2100 - total flux cleaned = 0.000555613 Jy ! Component: 2150 - total flux cleaned = 0.000555638 Jy ! Component: 2200 - total flux cleaned = 0.000555682 Jy ! Component: 2250 - total flux cleaned = 0.000555675 Jy ! Component: 2300 - total flux cleaned = 0.000532838 Jy ! Component: 2350 - total flux cleaned = 0.000544265 Jy ! Component: 2400 - total flux cleaned = 0.000555418 Jy ! Component: 2450 - total flux cleaned = 0.000555484 Jy ! Component: 2500 - total flux cleaned = 0.00057775 Jy ! Component: 2550 - total flux cleaned = 0.000588667 Jy ! Component: 2600 - total flux cleaned = 0.000642873 Jy ! Component: 2650 - total flux cleaned = 0.000642866 Jy ! Component: 2700 - total flux cleaned = 0.00062131 Jy ! Component: 2750 - total flux cleaned = 0.000674275 Jy ! Component: 2800 - total flux cleaned = 0.000684678 Jy ! Component: 2850 - total flux cleaned = 0.000695039 Jy ! Component: 2900 - total flux cleaned = 0.000705429 Jy ! Component: 2950 - total flux cleaned = 0.000746652 Jy ! Component: 3000 - total flux cleaned = 0.000787702 Jy ! Component: 3050 - total flux cleaned = 0.000818075 Jy ! Component: 3100 - total flux cleaned = 0.000848208 Jy ! Component: 3150 - total flux cleaned = 0.000898143 Jy ! Component: 3200 - total flux cleaned = 0.000878272 Jy ! Component: 3250 - total flux cleaned = 0.00087826 Jy ! Component: 3300 - total flux cleaned = 0.000907691 Jy ! Component: 3350 - total flux cleaned = 0.000956374 Jy ! Component: 3400 - total flux cleaned = 0.000994997 Jy ! Component: 3450 - total flux cleaned = 0.000975823 Jy ! Component: 3500 - total flux cleaned = 0.00107128 Jy ! Component: 3550 - total flux cleaned = 0.00110918 Jy ! Component: 3600 - total flux cleaned = 0.00111859 Jy ! Component: 3650 - total flux cleaned = 0.00119358 Jy ! Component: 3700 - total flux cleaned = 0.00119349 Jy ! Component: 3750 - total flux cleaned = 0.00124903 Jy ! Component: 3800 - total flux cleaned = 0.00127669 Jy ! Component: 3850 - total flux cleaned = 0.00130413 Jy ! Component: 3900 - total flux cleaned = 0.0013223 Jy ! Component: 3950 - total flux cleaned = 0.0013403 Jy ! Component: 4000 - total flux cleaned = 0.00142113 Jy ! Component: 4050 - total flux cleaned = 0.00143891 Jy ! Total flux subtracted in 4096 components = 0.00145661 Jy ! Clean residual min=-0.000708 max=0.000621 Jy/beam ! Clean residual mean=-0.000001 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.205294 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 540 components and 0.205294 Jy ![Exited script file: muppet] wmap "J0622-0109_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.216 x 8.268 at -4.51 degrees (North through East) ! Clean map min=-0.0013473 max=0.12731 Jy/beam ! Writing clean map to FITS file: J0622-0109_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127313 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165693 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.390439 0.390439 0.780877 1.56175 3.12351 6.24702 12.494 24.9881 49.9761 99.9523 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.216 x 8.268 at -4.51 degrees (North through East) ! Clean map min=-0.0013473 max=0.12731 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0622-0109_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:12:44 2019