! Started logfile: J0621-0609_S_2017_06_15_pus_uvs.log on Tue May 7 15:12:33 2019 obs J0621-0609_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0621-0609_S_2017_06_15_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.952579 visibilities/baseline/integration-bin. ! Found source: J0621-0609 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 19204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0621-0609_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 613 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985204Jy sigma=0.008062 ! Fit after self-cal, rms=0.950208Jy sigma=0.007796 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=7.018 mas, bpa=-4.483 degrees ! Estimated noise=1075.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.041079 Jy ! Component: 100 - total flux cleaned = 0.0507318 Jy ! Total flux subtracted in 100 components = 0.0507318 Jy ! Clean residual min=-0.003715 max=0.003757 Jy/beam ! Clean residual mean=-0.000000 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.0507318 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0507318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084832Jy sigma=0.000664 ! Fit after self-cal, rms=0.084233Jy sigma=0.000659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=8.034 mas, bpa=-3.679 degrees ! Estimated noise=718.662 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485703 Jy ! Component: 100 - total flux cleaned = 0.00717349 Jy ! Component: 150 - total flux cleaned = 0.00852545 Jy ! Component: 200 - total flux cleaned = 0.00933374 Jy ! Total flux subtracted in 200 components = 0.00933374 Jy ! Clean residual min=-0.002032 max=0.002407 Jy/beam ! Clean residual mean=0.000007 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0600655 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 30 components and 0.0600655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083968Jy sigma=0.000657 ! Fit after self-cal, rms=0.083960Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.92 HN 1.01 KP 1.06 ! LA 1.05 MK 1.05 NL 0.94 OV 1.08 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.03 HN 1.06 KP 0.97 ! LA 0.96 MK 1.11 NL 1.08 OV 1.05 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 0.99 KP 0.99 ! LA 0.92 MK 1.02 NL 1.01 OV 0.98 ! PT 0.93 SC 1.09 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.90 KP 1.00* ! LA 0.76 MK 0.82 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.083960Jy sigma=0.000657 ! Fit after self-cal, rms=0.084931Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=8.113 mas, bpa=-3.69 degrees ! Estimated noise=719.688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285893 Jy ! Component: 100 - total flux cleaned = 0.000232927 Jy ! Component: 150 - total flux cleaned = 0.000232867 Jy ! Component: 200 - total flux cleaned = 0.000232847 Jy ! Total flux subtracted in 200 components = 0.000232847 Jy ! Clean residual min=-0.001929 max=0.002069 Jy/beam ! Clean residual mean=0.000001 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0602984 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0602984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084914Jy sigma=0.000655 ! Fit after self-cal, rms=0.084953Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084953Jy sigma=0.000655 ! Fit after self-cal, rms=0.084873Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=8.074 mas, bpa=-3.592 degrees ! Estimated noise=718.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.20462e-05 Jy ! Component: 100 - total flux cleaned = 0.000104572 Jy ! Component: 150 - total flux cleaned = 0.000104997 Jy ! Component: 200 - total flux cleaned = 0.00011981 Jy ! Total flux subtracted in 200 components = 0.00011981 Jy ! Clean residual min=-0.001878 max=0.001956 Jy/beam ! Clean residual mean=0.000001 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0604182 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.0604182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084864Jy sigma=0.000653 ! Fit after self-cal, rms=0.084915Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017161 Jy ! Component: 100 - total flux cleaned = 0.00208572 Jy ! Component: 150 - total flux cleaned = 0.00221895 Jy ! Component: 200 - total flux cleaned = 0.00219541 Jy ! Total flux subtracted in 200 components = 0.00219541 Jy ! Clean residual min=-0.001767 max=0.001753 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0626136 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.0626136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084872Jy sigma=0.000653 ! Fit after self-cal, rms=0.084846Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084846Jy sigma=0.000653 ! Fit after self-cal, rms=0.084659Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.249 mas, bmaj=8.048 mas, bpa=-3.513 degrees ! Estimated noise=714.981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110623 Jy ! Component: 100 - total flux cleaned = 0.00135421 Jy ! Component: 150 - total flux cleaned = 0.00142001 Jy ! Component: 200 - total flux cleaned = 0.00143958 Jy ! Total flux subtracted in 200 components = 0.00143958 Jy ! Clean residual min=-0.001719 max=0.001791 Jy/beam ! Clean residual mean=-0.000001 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0640532 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.0640532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084636Jy sigma=0.000652 ! Fit after self-cal, rms=0.084637Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305017 Jy ! Component: 100 - total flux cleaned = 0.000417195 Jy ! Component: 150 - total flux cleaned = 0.000436693 Jy ! Component: 200 - total flux cleaned = 0.000454416 Jy ! Total flux subtracted in 200 components = 0.000454416 Jy ! Clean residual min=-0.001700 max=0.001780 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0645076 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.0645076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084624Jy sigma=0.000652 ! Fit after self-cal, rms=0.084615Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084615Jy sigma=0.000652 ! Fit after self-cal, rms=0.084448Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.581 mas, bmaj=13.85 mas, bpa=-1.692 degrees ! Estimated noise=889.361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000468125 Jy ! Component: 100 - total flux cleaned = 0.000628514 Jy ! Component: 150 - total flux cleaned = 0.000703304 Jy ! Component: 200 - total flux cleaned = 0.000765164 Jy ! Total flux subtracted in 200 components = 0.000765164 Jy ! Clean residual min=-0.001780 max=0.001794 Jy/beam ! Clean residual mean=-0.000001 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0652728 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 0.0652728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084443Jy sigma=0.000652 ! Fit after self-cal, rms=0.084439Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.19236e-06 Jy ! Component: 100 - total flux cleaned = 8.31219e-05 Jy ! Component: 150 - total flux cleaned = 0.000131524 Jy ! Component: 200 - total flux cleaned = 0.000141932 Jy ! Total flux subtracted in 200 components = 0.000141932 Jy ! Clean residual min=-0.001762 max=0.001785 Jy/beam ! Clean residual mean=-0.000002 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0654147 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 0.0654147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084437Jy sigma=0.000652 ! Fit after self-cal, rms=0.084433Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.045 mas, bpa=-3.535 degrees ! Estimated noise=713.676 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 8.045 at -3.535 degrees (North through East) ! Clean map min=-0.0015921 max=0.052108 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.78 mas, bmaj=7.053 mas, bpa=-4.641 degrees ! Estimated noise=1059.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410223 Jy ! Component: 100 - total flux cleaned = 0.051174 Jy ! Component: 150 - total flux cleaned = 0.0560875 Jy ! Component: 200 - total flux cleaned = 0.0592914 Jy ! Total flux subtracted in 200 components = 0.0592914 Jy ! Clean residual min=-0.002793 max=0.002955 Jy/beam ! Clean residual mean=-0.000000 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0592914 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0592914 Jy ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.045 mas, bpa=-3.535 degrees ! Estimated noise=713.676 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274226 Jy ! Component: 100 - total flux cleaned = 0.00435711 Jy ! Component: 150 - total flux cleaned = 0.00502801 Jy ! Component: 200 - total flux cleaned = 0.00538601 Jy ! Total flux subtracted in 200 components = 0.00538601 Jy ! Clean residual min=-0.001709 max=0.001814 Jy/beam ! Clean residual mean=-0.000000 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0646774 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 39 components and 0.0646774 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.581 mas, bmaj=13.85 mas, bpa=-1.692 degrees ! Estimated noise=889.361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217765 Jy ! Component: 100 - total flux cleaned = 0.000367491 Jy ! Component: 150 - total flux cleaned = 0.000500085 Jy ! Component: 200 - total flux cleaned = 0.000577512 Jy ! Total flux subtracted in 200 components = 0.000577512 Jy ! Clean residual min=-0.001807 max=0.001772 Jy/beam ! Clean residual mean=-0.000001 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0652549 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.6077e-05 Jy ! Component: 100 - total flux cleaned = 0.000101095 Jy ! Component: 150 - total flux cleaned = 0.000143152 Jy ! Component: 200 - total flux cleaned = 0.000180605 Jy ! Total flux subtracted in 200 components = 0.000180605 Jy ! Clean residual min=-0.001790 max=0.001756 Jy/beam ! Clean residual mean=-0.000002 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0654355 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 72 components and 0.0654355 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.045 mas, bpa=-3.535 degrees ! Estimated noise=713.676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152587 Jy ! Component: 100 - total flux cleaned = -0.000178558 Jy ! Component: 150 - total flux cleaned = -0.000178271 Jy ! Component: 200 - total flux cleaned = -0.000157578 Jy ! Total flux subtracted in 200 components = -0.000157578 Jy ! Clean residual min=-0.001729 max=0.001737 Jy/beam ! Clean residual mean=-0.000001 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0652779 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.0652779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084447Jy sigma=0.000652 ! Fit after self-cal, rms=0.084451Jy sigma=0.000652 wmodel J0621-0609_S_2017_06_15_pus_map.mod ! Writing 89 model components to file: J0621-0609_S_2017_06_15_pus_map.mod wobs J0621-0609_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0621-0609_S_2017_06_15_pus_uvs.fits wwins J0621-0609_S_2017_06_15_pus_map.win ! wwins: Wrote 2 windows to J0621-0609_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.37106e-05 Jy ! Component: 100 - total flux cleaned = -0.00024502 Jy ! Component: 150 - total flux cleaned = -0.000474715 Jy ! Component: 200 - total flux cleaned = -0.000695657 Jy ! Component: 250 - total flux cleaned = -0.000802402 Jy ! Component: 300 - total flux cleaned = -0.000984282 Jy ! Component: 350 - total flux cleaned = -0.00118608 Jy ! Component: 400 - total flux cleaned = -0.00130918 Jy ! Component: 450 - total flux cleaned = -0.00145463 Jy ! Component: 500 - total flux cleaned = -0.00162021 Jy ! Component: 550 - total flux cleaned = -0.00169002 Jy ! Component: 600 - total flux cleaned = -0.00180403 Jy ! Component: 650 - total flux cleaned = -0.0019159 Jy ! Component: 700 - total flux cleaned = -0.00196014 Jy ! Component: 750 - total flux cleaned = -0.00204652 Jy ! Component: 800 - total flux cleaned = -0.00196105 Jy ! Component: 850 - total flux cleaned = -0.00185623 Jy ! Component: 900 - total flux cleaned = -0.00179434 Jy ! Component: 950 - total flux cleaned = -0.00175362 Jy ! Component: 1000 - total flux cleaned = -0.00173348 Jy ! Component: 1050 - total flux cleaned = -0.00167347 Jy ! Component: 1100 - total flux cleaned = -0.00161395 Jy ! Component: 1150 - total flux cleaned = -0.0015556 Jy ! Component: 1200 - total flux cleaned = -0.0014594 Jy ! Component: 1250 - total flux cleaned = -0.00149786 Jy ! Component: 1300 - total flux cleaned = -0.00146022 Jy ! Component: 1350 - total flux cleaned = -0.00144195 Jy ! Component: 1400 - total flux cleaned = -0.00136809 Jy ! Component: 1450 - total flux cleaned = -0.00131339 Jy ! Component: 1500 - total flux cleaned = -0.00136762 Jy ! Component: 1550 - total flux cleaned = -0.00129587 Jy ! Component: 1600 - total flux cleaned = -0.00138449 Jy ! Component: 1650 - total flux cleaned = -0.00131375 Jy ! Component: 1700 - total flux cleaned = -0.00129641 Jy ! Component: 1750 - total flux cleaned = -0.00138315 Jy ! Component: 1800 - total flux cleaned = -0.001349 Jy ! Component: 1850 - total flux cleaned = -0.00143424 Jy ! Component: 1900 - total flux cleaned = -0.00145111 Jy ! Component: 1950 - total flux cleaned = -0.00143425 Jy ! Component: 2000 - total flux cleaned = -0.00145091 Jy ! Component: 2050 - total flux cleaned = -0.00151689 Jy ! Component: 2100 - total flux cleaned = -0.00141896 Jy ! Component: 2150 - total flux cleaned = -0.00148437 Jy ! Component: 2200 - total flux cleaned = -0.00156473 Jy ! Component: 2250 - total flux cleaned = -0.00154871 Jy ! Component: 2300 - total flux cleaned = -0.00154864 Jy ! Component: 2350 - total flux cleaned = -0.00162739 Jy ! Component: 2400 - total flux cleaned = -0.00162752 Jy ! Component: 2450 - total flux cleaned = -0.00164288 Jy ! Component: 2500 - total flux cleaned = -0.00168909 Jy ! Component: 2550 - total flux cleaned = -0.00165852 Jy ! Component: 2600 - total flux cleaned = -0.00173473 Jy ! Component: 2650 - total flux cleaned = -0.00179486 Jy ! Component: 2700 - total flux cleaned = -0.00178015 Jy ! Component: 2750 - total flux cleaned = -0.00186947 Jy ! Component: 2800 - total flux cleaned = -0.00191362 Jy ! Component: 2850 - total flux cleaned = -0.00189879 Jy ! Component: 2900 - total flux cleaned = -0.00191336 Jy ! Component: 2950 - total flux cleaned = -0.00191331 Jy ! Component: 3000 - total flux cleaned = -0.00194203 Jy ! Component: 3050 - total flux cleaned = -0.00198477 Jy ! Component: 3100 - total flux cleaned = -0.00202725 Jy ! Component: 3150 - total flux cleaned = -0.00201326 Jy ! Component: 3200 - total flux cleaned = -0.00205509 Jy ! Component: 3250 - total flux cleaned = -0.00211078 Jy ! Component: 3300 - total flux cleaned = -0.00211076 Jy ! Component: 3350 - total flux cleaned = -0.00215197 Jy ! Component: 3400 - total flux cleaned = -0.00217926 Jy ! Component: 3450 - total flux cleaned = -0.00217927 Jy ! Component: 3500 - total flux cleaned = -0.00217924 Jy ! Component: 3550 - total flux cleaned = -0.00212554 Jy ! Component: 3600 - total flux cleaned = -0.00211238 Jy ! Component: 3650 - total flux cleaned = -0.00215208 Jy ! Component: 3700 - total flux cleaned = -0.00208627 Jy ! Component: 3750 - total flux cleaned = -0.00208631 Jy ! Component: 3800 - total flux cleaned = -0.00213834 Jy ! Component: 3850 - total flux cleaned = -0.00209952 Jy ! Component: 3900 - total flux cleaned = -0.00213797 Jy ! Component: 3950 - total flux cleaned = -0.00217623 Jy ! Component: 4000 - total flux cleaned = -0.00220155 Jy ! Component: 4050 - total flux cleaned = -0.0022268 Jy ! Total flux subtracted in 4096 components = -0.00220157 Jy ! Clean residual min=-0.000665 max=0.000647 Jy/beam ! Clean residual mean=-0.000000 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.0630764 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 383 components and 0.0630764 Jy ![Exited script file: muppet] wmap "J0621-0609_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 8.045 at -3.535 degrees (North through East) ! Clean map min=-0.0014336 max=0.051857 Jy/beam ! Writing clean map to FITS file: J0621-0609_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0518566 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000233817 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.35268 1.35268 2.70535 5.4107 10.8214 21.6428 43.2856 86.5713 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 8.045 at -3.535 degrees (North through East) ! Clean map min=-0.0014336 max=0.051857 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0621-0609_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:12:38 2019