! Started logfile: J0620-2827_S_2017_08_12_pus_uvs.log on Fri May 10 14:54:18 2019 obs J0620-2827_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0620-2827_S_2017_08_12_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.764286 visibilities/baseline/integration-bin. ! Found source: J0620-2827 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 7704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0620-2827_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 353 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.758909Jy sigma=0.005193 ! Fit after self-cal, rms=0.743381Jy sigma=0.005093 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.291 mas, bmaj=6.818 mas, bpa=-6.023 degrees ! Estimated noise=1870.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203192 Jy ! Component: 100 - total flux cleaned = 0.27795 Jy ! Total flux subtracted in 100 components = 0.27795 Jy ! Clean residual min=-0.014476 max=0.034986 Jy/beam ! Clean residual mean=-0.000086 rms=0.004627 Jy/beam ! Combined flux in latest and established models = 0.27795 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.27795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129220Jy sigma=0.000881 ! Fit after self-cal, rms=0.128884Jy sigma=0.000879 ! Inverting map ! Added new window around map position (3.5, 8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367721 Jy ! Component: 100 - total flux cleaned = 0.0577824 Jy ! Total flux subtracted in 100 components = 0.0577824 Jy ! Clean residual min=-0.009662 max=0.019696 Jy/beam ! Clean residual mean=-0.000051 rms=0.002909 Jy/beam ! Combined flux in latest and established models = 0.335733 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.335733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116055Jy sigma=0.000755 ! Fit after self-cal, rms=0.115818Jy sigma=0.000753 ! Inverting map ! Added new window around map position (4, -7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178179 Jy ! Component: 100 - total flux cleaned = 0.0290568 Jy ! Total flux subtracted in 100 components = 0.0290568 Jy ! Clean residual min=-0.007838 max=0.014497 Jy/beam ! Clean residual mean=-0.000034 rms=0.002350 Jy/beam ! Combined flux in latest and established models = 0.36479 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 0.364789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111922Jy sigma=0.000721 ! Fit after self-cal, rms=0.111722Jy sigma=0.000718 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=8.012 mas, bpa=-6.541 degrees ! Estimated noise=1329.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168852 Jy ! Component: 100 - total flux cleaned = 0.0272637 Jy ! Component: 150 - total flux cleaned = 0.0337471 Jy ! Component: 200 - total flux cleaned = 0.0360815 Jy ! Total flux subtracted in 200 components = 0.0360815 Jy ! Clean residual min=-0.006713 max=0.008204 Jy/beam ! Clean residual mean=-0.000042 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 0.400871 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 87 components and 0.400871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108728Jy sigma=0.000697 ! Fit after self-cal, rms=0.108736Jy sigma=0.000697 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.14 KP 1.06 ! LA 0.99 MK 1.03 NL 0.94 OV 0.94 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.24 KP 1.02 ! LA 0.98 MK 0.94 NL 1.15 OV 0.99 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.20 KP 1.01 ! LA 0.97 MK 1.03 NL 0.98 OV 0.91 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.04 KP 1.00* ! LA 1.00* MK 0.98 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.108736Jy sigma=0.000697 ! Fit after self-cal, rms=0.113658Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=8.005 mas, bpa=-6.496 degrees ! Estimated noise=1350.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107411 Jy ! Component: 100 - total flux cleaned = -0.00144473 Jy ! Component: 150 - total flux cleaned = -0.00177503 Jy ! Component: 200 - total flux cleaned = -0.00197473 Jy ! Total flux subtracted in 200 components = -0.00197473 Jy ! Clean residual min=-0.005296 max=0.006037 Jy/beam ! Clean residual mean=-0.000020 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.398896 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 113 components and 0.398896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113336Jy sigma=0.000677 ! Fit after self-cal, rms=0.113406Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113406Jy sigma=0.000677 ! Fit after self-cal, rms=0.113913Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=8.019 mas, bpa=-6.609 degrees ! Estimated noise=1352.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100624 Jy ! Component: 100 - total flux cleaned = -0.00181436 Jy ! Component: 150 - total flux cleaned = -0.00219442 Jy ! Component: 200 - total flux cleaned = -0.0025303 Jy ! Total flux subtracted in 200 components = -0.0025303 Jy ! Clean residual min=-0.003883 max=0.003446 Jy/beam ! Clean residual mean=-0.000020 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.396366 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 141 components and 0.396366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113782Jy sigma=0.000665 ! Fit after self-cal, rms=0.113828Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.5267e-05 Jy ! Component: 100 - total flux cleaned = -8.24767e-05 Jy ! Component: 150 - total flux cleaned = -0.000242752 Jy ! Component: 200 - total flux cleaned = -0.000340912 Jy ! Total flux subtracted in 200 components = -0.000340912 Jy ! Clean residual min=-0.003801 max=0.003290 Jy/beam ! Clean residual mean=-0.000021 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.396025 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 157 components and 0.396025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113769Jy sigma=0.000665 ! Fit after self-cal, rms=0.113763Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113763Jy sigma=0.000665 ! Fit after self-cal, rms=0.114898Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.884 mas, bmaj=8.019 mas, bpa=-6.604 degrees ! Estimated noise=1355.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000986592 Jy ! Component: 100 - total flux cleaned = -0.00153047 Jy ! Component: 150 - total flux cleaned = -0.00183539 Jy ! Component: 200 - total flux cleaned = -0.00210413 Jy ! Total flux subtracted in 200 components = -0.00210413 Jy ! Clean residual min=-0.003732 max=0.003244 Jy/beam ! Clean residual mean=-0.000023 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.393921 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 167 components and 0.393921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114835Jy sigma=0.000664 ! Fit after self-cal, rms=0.114838Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.40278e-05 Jy ! Component: 100 - total flux cleaned = -2.87627e-05 Jy ! Component: 150 - total flux cleaned = -0.000103459 Jy ! Component: 200 - total flux cleaned = -0.000172089 Jy ! Total flux subtracted in 200 components = -0.000172089 Jy ! Clean residual min=-0.003685 max=0.003225 Jy/beam ! Clean residual mean=-0.000023 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.393749 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 176 components and 0.393749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114807Jy sigma=0.000664 ! Fit after self-cal, rms=0.114803Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114803Jy sigma=0.000664 ! Fit after self-cal, rms=0.115654Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.628 mas, bmaj=21.07 mas, bpa=-2.204 degrees ! Estimated noise=1719.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000678516 Jy ! Component: 100 - total flux cleaned = -0.000833364 Jy ! Component: 150 - total flux cleaned = -0.000899655 Jy ! Component: 200 - total flux cleaned = -0.000899776 Jy ! Total flux subtracted in 200 components = -0.000899776 Jy ! Clean residual min=-0.003406 max=0.003364 Jy/beam ! Clean residual mean=-0.000051 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.392849 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 187 components and 0.392849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115631Jy sigma=0.000664 ! Fit after self-cal, rms=0.115630Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260206 Jy ! Component: 100 - total flux cleaned = 0.000261423 Jy ! Component: 150 - total flux cleaned = 0.000262679 Jy ! Component: 200 - total flux cleaned = 0.000283588 Jy ! Total flux subtracted in 200 components = 0.000283588 Jy ! Clean residual min=-0.003348 max=0.003292 Jy/beam ! Clean residual mean=-0.000050 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.393133 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 195 components and 0.393133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115621Jy sigma=0.000664 ! Fit after self-cal, rms=0.115617Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=8.018 mas, bpa=-6.601 degrees ! Estimated noise=1356.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.888 x 8.018 at -6.601 degrees (North through East) ! Clean map min=-0.0033936 max=0.24748 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.312 mas, bmaj=6.795 mas, bpa=-5.963 degrees ! Estimated noise=1923.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208526 Jy ! Component: 100 - total flux cleaned = 0.285175 Jy ! Component: 150 - total flux cleaned = 0.32068 Jy ! Component: 200 - total flux cleaned = 0.340557 Jy ! Total flux subtracted in 200 components = 0.340557 Jy ! Clean residual min=-0.007067 max=0.010750 Jy/beam ! Clean residual mean=-0.000037 rms=0.001868 Jy/beam ! Combined flux in latest and established models = 0.340557 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.340557 Jy ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=8.018 mas, bpa=-6.601 degrees ! Estimated noise=1356.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186343 Jy ! Component: 100 - total flux cleaned = 0.0298343 Jy ! Component: 150 - total flux cleaned = 0.0370245 Jy ! Component: 200 - total flux cleaned = 0.041784 Jy ! Total flux subtracted in 200 components = 0.041784 Jy ! Clean residual min=-0.004035 max=0.004060 Jy/beam ! Clean residual mean=-0.000042 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.382341 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 90 components and 0.382341 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.628 mas, bmaj=21.07 mas, bpa=-2.204 degrees ! Estimated noise=1719.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00527027 Jy ! Component: 100 - total flux cleaned = 0.00798293 Jy ! Component: 150 - total flux cleaned = 0.00943482 Jy ! Component: 200 - total flux cleaned = 0.00964484 Jy ! Total flux subtracted in 200 components = 0.00964484 Jy ! Clean residual min=-0.003574 max=0.003297 Jy/beam ! Clean residual mean=-0.000054 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.391986 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189792 Jy ! Component: 100 - total flux cleaned = 0.000331793 Jy ! Component: 150 - total flux cleaned = 0.000463938 Jy ! Component: 200 - total flux cleaned = 0.000558292 Jy ! Total flux subtracted in 200 components = 0.000558292 Jy ! Clean residual min=-0.003487 max=0.003320 Jy/beam ! Clean residual mean=-0.000052 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.392544 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 117 components and 0.392544 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=8.018 mas, bpa=-6.601 degrees ! Estimated noise=1356.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00059839 Jy ! Component: 100 - total flux cleaned = -0.000524719 Jy ! Component: 150 - total flux cleaned = -0.000734172 Jy ! Component: 200 - total flux cleaned = -0.000779223 Jy ! Total flux subtracted in 200 components = -0.000779223 Jy ! Clean residual min=-0.003482 max=0.003078 Jy/beam ! Clean residual mean=-0.000025 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.391765 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 136 components and 0.391765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115636Jy sigma=0.000664 ! Fit after self-cal, rms=0.115611Jy sigma=0.000664 wmodel J0620-2827_S_2017_08_12_pus_map.mod ! Writing 136 model components to file: J0620-2827_S_2017_08_12_pus_map.mod wobs J0620-2827_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0620-2827_S_2017_08_12_pus_uvs.fits wwins J0620-2827_S_2017_08_12_pus_map.win ! wwins: Wrote 5 windows to J0620-2827_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108394 Jy ! Component: 100 - total flux cleaned = -0.00168386 Jy ! Component: 150 - total flux cleaned = -0.00194268 Jy ! Component: 200 - total flux cleaned = -0.00209117 Jy ! Component: 250 - total flux cleaned = -0.00204215 Jy ! Component: 300 - total flux cleaned = -0.0019953 Jy ! Component: 350 - total flux cleaned = -0.00186066 Jy ! Component: 400 - total flux cleaned = -0.00172984 Jy ! Component: 450 - total flux cleaned = -0.00160268 Jy ! Component: 500 - total flux cleaned = -0.00164341 Jy ! Component: 550 - total flux cleaned = -0.00156133 Jy ! Component: 600 - total flux cleaned = -0.00148233 Jy ! Component: 650 - total flux cleaned = -0.00152128 Jy ! Component: 700 - total flux cleaned = -0.00152121 Jy ! Component: 750 - total flux cleaned = -0.00144659 Jy ! Component: 800 - total flux cleaned = -0.00133717 Jy ! Component: 850 - total flux cleaned = -0.00130162 Jy ! Component: 900 - total flux cleaned = -0.00133638 Jy ! Component: 950 - total flux cleaned = -0.00126693 Jy ! Component: 1000 - total flux cleaned = -0.0011993 Jy ! Component: 1050 - total flux cleaned = -0.00119862 Jy ! Component: 1100 - total flux cleaned = -0.0010665 Jy ! Component: 1150 - total flux cleaned = -0.00100175 Jy ! Component: 1200 - total flux cleaned = -0.000906636 Jy ! Component: 1250 - total flux cleaned = -0.000843836 Jy ! Component: 1300 - total flux cleaned = -0.000690006 Jy ! Component: 1350 - total flux cleaned = -0.000750778 Jy ! Component: 1400 - total flux cleaned = -0.000571146 Jy ! Component: 1450 - total flux cleaned = -0.000483148 Jy ! Component: 1500 - total flux cleaned = -0.000541525 Jy ! Component: 1550 - total flux cleaned = -0.000426543 Jy ! Component: 1600 - total flux cleaned = -0.000313469 Jy ! Component: 1650 - total flux cleaned = -0.000230055 Jy ! Component: 1700 - total flux cleaned = -6.52817e-05 Jy ! Component: 1750 - total flux cleaned = 1.54767e-05 Jy ! Component: 1800 - total flux cleaned = 0.000122622 Jy ! Component: 1850 - total flux cleaned = 0.00025541 Jy ! Component: 1900 - total flux cleaned = 0.000359985 Jy ! Component: 1950 - total flux cleaned = 0.000463312 Jy ! Component: 2000 - total flux cleaned = 0.000590394 Jy ! Component: 2050 - total flux cleaned = 0.000690681 Jy ! Component: 2100 - total flux cleaned = 0.00079015 Jy ! Component: 2150 - total flux cleaned = 0.000937696 Jy ! Component: 2200 - total flux cleaned = 0.00101103 Jy ! Component: 2250 - total flux cleaned = 0.00113149 Jy ! Component: 2300 - total flux cleaned = 0.00122665 Jy ! Component: 2350 - total flux cleaned = 0.00134417 Jy ! Component: 2400 - total flux cleaned = 0.00141443 Jy ! Component: 2450 - total flux cleaned = 0.00148423 Jy ! Component: 2500 - total flux cleaned = 0.00162177 Jy ! Component: 2550 - total flux cleaned = 0.00155377 Jy ! Component: 2600 - total flux cleaned = 0.00164394 Jy ! Component: 2650 - total flux cleaned = 0.00159929 Jy ! Component: 2700 - total flux cleaned = 0.00166586 Jy ! Component: 2750 - total flux cleaned = 0.00168795 Jy ! Component: 2800 - total flux cleaned = 0.00173138 Jy ! Component: 2850 - total flux cleaned = 0.00177457 Jy ! Component: 2900 - total flux cleaned = 0.00179583 Jy ! Component: 2950 - total flux cleaned = 0.00181713 Jy ! Component: 3000 - total flux cleaned = 0.00188007 Jy ! Component: 3050 - total flux cleaned = 0.00185927 Jy ! Component: 3100 - total flux cleaned = 0.00192162 Jy ! Component: 3150 - total flux cleaned = 0.00200391 Jy ! Component: 3200 - total flux cleaned = 0.00198373 Jy ! Component: 3250 - total flux cleaned = 0.00206476 Jy ! Component: 3300 - total flux cleaned = 0.0021249 Jy ! Component: 3350 - total flux cleaned = 0.00214503 Jy ! Component: 3400 - total flux cleaned = 0.00216497 Jy ! Component: 3450 - total flux cleaned = 0.00218469 Jy ! Component: 3500 - total flux cleaned = 0.00218472 Jy ! Component: 3550 - total flux cleaned = 0.00224292 Jy ! Component: 3600 - total flux cleaned = 0.0022813 Jy ! Component: 3650 - total flux cleaned = 0.00230037 Jy ! Component: 3700 - total flux cleaned = 0.00233832 Jy ! Component: 3750 - total flux cleaned = 0.00237589 Jy ! Component: 3800 - total flux cleaned = 0.00246899 Jy ! Component: 3850 - total flux cleaned = 0.00246895 Jy ! Component: 3900 - total flux cleaned = 0.0025059 Jy ! Component: 3950 - total flux cleaned = 0.00256065 Jy ! Component: 4000 - total flux cleaned = 0.00259684 Jy ! Component: 4050 - total flux cleaned = 0.0026147 Jy ! Total flux subtracted in 4096 components = 0.00270416 Jy ! Clean residual min=-0.000980 max=0.001136 Jy/beam ! Clean residual mean=-0.000002 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.394469 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 438 components and 0.394469 Jy ![Exited script file: muppet] wmap "J0620-2827_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.888 x 8.018 at -6.601 degrees (North through East) ! Clean map min=-0.00205 max=0.25255 Jy/beam ! Writing clean map to FITS file: J0620-2827_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.252551 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000315015 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.374199 0.374199 0.748398 1.4968 2.99359 5.98718 11.9744 23.9487 47.8974 95.7949 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.252 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.888 x 8.018 at -6.601 degrees (North through East) ! Clean map min=-0.00205 max=0.25255 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0620-2827_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:54:23 2019