! Started logfile: J0619-1140_S_2017_05_27_pus_uvs.log on Fri May 3 10:58:25 2019 obs J0619-1140_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0619-1140_S_2017_05_27_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.90614 visibilities/baseline/integration-bin. ! Found source: J0619-1140 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 12396 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0619-1140_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 394 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.501742Jy sigma=0.059425 ! Fit after self-cal, rms=0.484282Jy sigma=0.059391 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.698 mas, bmaj=7.319 mas, bpa=6.595 degrees ! Estimated noise=286.495 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0973688 Jy ! Component: 100 - total flux cleaned = 0.137231 Jy ! Total flux subtracted in 100 components = 0.137231 Jy ! Clean residual min=-0.031815 max=0.068048 Jy/beam ! Clean residual mean=-0.000082 rms=0.011753 Jy/beam ! Combined flux in latest and established models = 0.137231 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.137231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.468837Jy sigma=0.005999 ! Fit after self-cal, rms=0.468579Jy sigma=0.005998 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=7.783 mas, bpa=3.156 degrees ! Estimated noise=366.557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103107 Jy ! Component: 100 - total flux cleaned = 0.161866 Jy ! Component: 150 - total flux cleaned = 0.172266 Jy ! Component: 200 - total flux cleaned = 0.176742 Jy ! Total flux subtracted in 200 components = 0.176742 Jy ! Clean residual min=-0.063589 max=0.101614 Jy/beam ! Clean residual mean=-0.000217 rms=0.022870 Jy/beam ! Combined flux in latest and established models = 0.313973 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.313973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346069Jy sigma=0.010367 ! Fit after self-cal, rms=0.345660Jy sigma=0.010366 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 28.26 FD 0.60 HN 0.72 KP 0.74 ! LA 0.70 MK 0.81 NL 0.66 OV 0.69 ! PT 0.75 SC 0.56 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.63 HN 0.74 KP 0.71 ! LA 0.68 MK 0.81 NL 0.75 OV 0.66 ! PT 0.74 SC 0.58 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.65 HN 0.73 KP 0.72 ! LA 0.71 MK 0.85 NL 0.73 OV 0.60 ! PT 0.73 SC 0.58 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.72 HN 0.79 KP 1.00* ! LA 0.65 MK 0.80 NL 1.00* OV 1.00* ! PT 0.74 SC 1.00* ! ! ! Fit before self-cal, rms=0.345660Jy sigma=0.010366 ! Fit after self-cal, rms=0.096504Jy sigma=0.001347 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=8.185 mas, bpa=-1.361 degrees ! Estimated noise=475.765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00412663 Jy ! Component: 100 - total flux cleaned = -0.00867484 Jy ! Component: 150 - total flux cleaned = -0.0126019 Jy ! Component: 200 - total flux cleaned = -0.0139892 Jy ! Total flux subtracted in 200 components = -0.0139892 Jy ! Clean residual min=-0.017296 max=0.013507 Jy/beam ! Clean residual mean=0.000016 rms=0.003074 Jy/beam ! Combined flux in latest and established models = 0.299984 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.299984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081758Jy sigma=0.001081 ! Fit after self-cal, rms=0.079220Jy sigma=0.001031 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079220Jy sigma=0.001031 ! Fit after self-cal, rms=0.066001Jy sigma=0.000961 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.155 mas, bpa=-1.796 degrees ! Estimated noise=464.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129631 Jy ! Component: 100 - total flux cleaned = -0.000336091 Jy ! Component: 150 - total flux cleaned = -0.000740933 Jy ! Component: 200 - total flux cleaned = -0.00110207 Jy ! Total flux subtracted in 200 components = -0.00110207 Jy ! Clean residual min=-0.011160 max=0.007981 Jy/beam ! Clean residual mean=-0.000005 rms=0.001965 Jy/beam ! Combined flux in latest and established models = 0.298881 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.298881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061005Jy sigma=0.000852 ! Fit after self-cal, rms=0.060995Jy sigma=0.000851 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.84171e-05 Jy ! Component: 100 - total flux cleaned = -0.000565276 Jy ! Component: 150 - total flux cleaned = -0.000820911 Jy ! Component: 200 - total flux cleaned = -0.00104444 Jy ! Total flux subtracted in 200 components = -0.00104444 Jy ! Clean residual min=-0.009406 max=0.007705 Jy/beam ! Clean residual mean=-0.000003 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.297837 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.297837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058821Jy sigma=0.000807 ! Fit after self-cal, rms=0.058811Jy sigma=0.000807 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058811Jy sigma=0.000807 ! Fit after self-cal, rms=0.056875Jy sigma=0.000796 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=8.115 mas, bpa=-2.161 degrees ! Estimated noise=463.878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156162 Jy ! Component: 100 - total flux cleaned = -0.00179216 Jy ! Component: 150 - total flux cleaned = -0.00199839 Jy ! Component: 200 - total flux cleaned = -0.00199533 Jy ! Total flux subtracted in 200 components = -0.00199533 Jy ! Clean residual min=-0.007455 max=0.005648 Jy/beam ! Clean residual mean=-0.000003 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.295842 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.295842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055344Jy sigma=0.000764 ! Fit after self-cal, rms=0.055327Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40491e-05 Jy ! Component: 100 - total flux cleaned = -0.000140967 Jy ! Component: 150 - total flux cleaned = -0.000290521 Jy ! Component: 200 - total flux cleaned = -0.000428767 Jy ! Total flux subtracted in 200 components = -0.000428767 Jy ! Clean residual min=-0.006530 max=0.005145 Jy/beam ! Clean residual mean=-0.000002 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.295413 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.295413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054518Jy sigma=0.000750 ! Fit after self-cal, rms=0.054514Jy sigma=0.000750 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054514Jy sigma=0.000750 ! Fit after self-cal, rms=0.053860Jy sigma=0.000745 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.305 mas, bmaj=15.18 mas, bpa=-3.892 degrees ! Estimated noise=588.472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201558 Jy ! Component: 100 - total flux cleaned = 0.00188639 Jy ! Component: 150 - total flux cleaned = 0.0016856 Jy ! Component: 200 - total flux cleaned = 0.00149795 Jy ! Total flux subtracted in 200 components = 0.00149795 Jy ! Clean residual min=-0.004243 max=0.003076 Jy/beam ! Clean residual mean=0.000003 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.296911 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.296911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053520Jy sigma=0.000736 ! Fit after self-cal, rms=0.053505Jy sigma=0.000736 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.03232e-05 Jy ! Component: 100 - total flux cleaned = -0.000237356 Jy ! Component: 150 - total flux cleaned = -0.000396395 Jy ! Component: 200 - total flux cleaned = -0.000612575 Jy ! Total flux subtracted in 200 components = -0.000612575 Jy ! Clean residual min=-0.004007 max=0.002945 Jy/beam ! Clean residual mean=0.000003 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.296298 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.296298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053218Jy sigma=0.000732 ! Fit after self-cal, rms=0.053215Jy sigma=0.000732 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=8.081 mas, bpa=-2.197 degrees ! Estimated noise=463.365 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.163 x 8.081 at -2.197 degrees (North through East) ! Clean map min=-0.0049832 max=0.23948 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.664 mas, bmaj=6.854 mas, bpa=-2.025 degrees ! Estimated noise=633.572 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201664 Jy ! Component: 100 - total flux cleaned = 0.248904 Jy ! Component: 150 - total flux cleaned = 0.268427 Jy ! Component: 200 - total flux cleaned = 0.275761 Jy ! Total flux subtracted in 200 components = 0.275761 Jy ! Clean residual min=-0.005323 max=0.007096 Jy/beam ! Clean residual mean=-0.000008 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.275761 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.275761 Jy ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=8.081 mas, bpa=-2.197 degrees ! Estimated noise=463.365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00827431 Jy ! Component: 100 - total flux cleaned = 0.0104319 Jy ! Component: 150 - total flux cleaned = 0.011524 Jy ! Component: 200 - total flux cleaned = 0.0123266 Jy ! Total flux subtracted in 200 components = 0.0123266 Jy ! Clean residual min=-0.003252 max=0.004344 Jy/beam ! Clean residual mean=-0.000003 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.288088 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.288088 Jy ! Inverting map ! Added new window around map position (36, -38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312006 Jy ! Component: 100 - total flux cleaned = 0.00323628 Jy ! Component: 150 - total flux cleaned = 0.00340079 Jy ! Component: 200 - total flux cleaned = 0.00353589 Jy ! Total flux subtracted in 200 components = 0.00353589 Jy ! Clean residual min=-0.002879 max=0.003687 Jy/beam ! Clean residual mean=-0.000003 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.291624 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 47 components and 0.291624 Jy ! Inverting map ! Added new window around map position (-36, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203034 Jy ! Component: 100 - total flux cleaned = 0.00194852 Jy ! Component: 150 - total flux cleaned = 0.00174577 Jy ! Component: 200 - total flux cleaned = 0.00180373 Jy ! Total flux subtracted in 200 components = 0.00180373 Jy ! Clean residual min=-0.002523 max=0.002231 Jy/beam ! Clean residual mean=-0.000001 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.293427 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 65 components and 0.293427 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.305 mas, bmaj=15.18 mas, bpa=-3.892 degrees ! Estimated noise=588.472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000938696 Jy ! Component: 100 - total flux cleaned = 0.000995756 Jy ! Component: 150 - total flux cleaned = 0.00104417 Jy ! Component: 200 - total flux cleaned = 0.0010072 Jy ! Total flux subtracted in 200 components = 0.0010072 Jy ! Clean residual min=-0.002254 max=0.002222 Jy/beam ! Clean residual mean=-0.000001 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.294435 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.37499e-05 Jy ! Component: 100 - total flux cleaned = -3.27955e-05 Jy ! Component: 150 - total flux cleaned = -6.38407e-05 Jy ! Component: 200 - total flux cleaned = -6.38658e-05 Jy ! Total flux subtracted in 200 components = -6.38658e-05 Jy ! Clean residual min=-0.002197 max=0.002232 Jy/beam ! Clean residual mean=-0.000001 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.294371 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 0.294371 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=8.081 mas, bpa=-2.197 degrees ! Estimated noise=463.365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000204218 Jy ! Component: 100 - total flux cleaned = -9.77277e-05 Jy ! Component: 150 - total flux cleaned = -9.91521e-05 Jy ! Component: 200 - total flux cleaned = -9.91202e-05 Jy ! Total flux subtracted in 200 components = -9.91202e-05 Jy ! Clean residual min=-0.002451 max=0.001880 Jy/beam ! Clean residual mean=-0.000000 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.294272 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 111 components and 0.294272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050816Jy sigma=0.000709 ! Fit after self-cal, rms=0.050768Jy sigma=0.000709 wmodel J0619-1140_S_2017_05_27_pus_map.mod ! Writing 111 model components to file: J0619-1140_S_2017_05_27_pus_map.mod wobs J0619-1140_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0619-1140_S_2017_05_27_pus_uvs.fits wwins J0619-1140_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J0619-1140_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109748 Jy ! Component: 100 - total flux cleaned = -0.00204576 Jy ! Component: 150 - total flux cleaned = -0.00264106 Jy ! Component: 200 - total flux cleaned = -0.00290521 Jy ! Component: 250 - total flux cleaned = -0.00315761 Jy ! Component: 300 - total flux cleaned = -0.00337069 Jy ! Component: 350 - total flux cleaned = -0.00342963 Jy ! Component: 400 - total flux cleaned = -0.00343015 Jy ! Component: 450 - total flux cleaned = -0.00343083 Jy ! Component: 500 - total flux cleaned = -0.00345914 Jy ! Component: 550 - total flux cleaned = -0.00348597 Jy ! Component: 600 - total flux cleaned = -0.00340848 Jy ! Component: 650 - total flux cleaned = -0.0034086 Jy ! Component: 700 - total flux cleaned = -0.00335864 Jy ! Component: 750 - total flux cleaned = -0.00333431 Jy ! Component: 800 - total flux cleaned = -0.00326349 Jy ! Component: 850 - total flux cleaned = -0.0032404 Jy ! Component: 900 - total flux cleaned = -0.00324045 Jy ! Component: 950 - total flux cleaned = -0.00317327 Jy ! Component: 1000 - total flux cleaned = -0.00315104 Jy ! Component: 1050 - total flux cleaned = -0.00315062 Jy ! Component: 1100 - total flux cleaned = -0.00298041 Jy ! Component: 1150 - total flux cleaned = -0.00295946 Jy ! Component: 1200 - total flux cleaned = -0.00283569 Jy ! Component: 1250 - total flux cleaned = -0.00283539 Jy ! Component: 1300 - total flux cleaned = -0.00271519 Jy ! Component: 1350 - total flux cleaned = -0.00267585 Jy ! Component: 1400 - total flux cleaned = -0.00265637 Jy ! Component: 1450 - total flux cleaned = -0.00259894 Jy ! Component: 1500 - total flux cleaned = -0.00261762 Jy ! Component: 1550 - total flux cleaned = -0.00259861 Jy ! Component: 1600 - total flux cleaned = -0.0025616 Jy ! Component: 1650 - total flux cleaned = -0.00252536 Jy ! Component: 1700 - total flux cleaned = -0.00256082 Jy ! Component: 1750 - total flux cleaned = -0.00252565 Jy ! Component: 1800 - total flux cleaned = -0.00243873 Jy ! Component: 1850 - total flux cleaned = -0.00243902 Jy ! Component: 1900 - total flux cleaned = -0.00240511 Jy ! Component: 1950 - total flux cleaned = -0.00238818 Jy ! Component: 2000 - total flux cleaned = -0.00237154 Jy ! Component: 2050 - total flux cleaned = -0.00227323 Jy ! Component: 2100 - total flux cleaned = -0.00224115 Jy ! Component: 2150 - total flux cleaned = -0.00222526 Jy ! Component: 2200 - total flux cleaned = -0.00219361 Jy ! Component: 2250 - total flux cleaned = -0.00216245 Jy ! Component: 2300 - total flux cleaned = -0.00214707 Jy ! Component: 2350 - total flux cleaned = -0.00211647 Jy ! Component: 2400 - total flux cleaned = -0.00204067 Jy ! Component: 2450 - total flux cleaned = -0.00196596 Jy ! Component: 2500 - total flux cleaned = -0.00198095 Jy ! Component: 2550 - total flux cleaned = -0.00196632 Jy ! Component: 2600 - total flux cleaned = -0.00195146 Jy ! Component: 2650 - total flux cleaned = -0.00185056 Jy ! Component: 2700 - total flux cleaned = -0.00180801 Jy ! Component: 2750 - total flux cleaned = -0.00175171 Jy ! Component: 2800 - total flux cleaned = -0.00169575 Jy ! Component: 2850 - total flux cleaned = -0.00159896 Jy ! Component: 2900 - total flux cleaned = -0.0015854 Jy ! Component: 2950 - total flux cleaned = -0.00154459 Jy ! Component: 3000 - total flux cleaned = -0.00149045 Jy ! Component: 3050 - total flux cleaned = -0.00145042 Jy ! Component: 3100 - total flux cleaned = -0.00139737 Jy ! Component: 3150 - total flux cleaned = -0.00133183 Jy ! Component: 3200 - total flux cleaned = -0.0012667 Jy ! Component: 3250 - total flux cleaned = -0.00125363 Jy ! Component: 3300 - total flux cleaned = -0.00115115 Jy ! Component: 3350 - total flux cleaned = -0.00115108 Jy ! Component: 3400 - total flux cleaned = -0.00103754 Jy ! Component: 3450 - total flux cleaned = -0.00101275 Jy ! Component: 3500 - total flux cleaned = -0.000988069 Jy ! Component: 3550 - total flux cleaned = -0.000963463 Jy ! Component: 3600 - total flux cleaned = -0.000939013 Jy ! Component: 3650 - total flux cleaned = -0.000902509 Jy ! Component: 3700 - total flux cleaned = -0.000854272 Jy ! Component: 3750 - total flux cleaned = -0.000854305 Jy ! Component: 3800 - total flux cleaned = -0.000806673 Jy ! Component: 3850 - total flux cleaned = -0.000794881 Jy ! Component: 3900 - total flux cleaned = -0.000771396 Jy ! Component: 3950 - total flux cleaned = -0.000794781 Jy ! Component: 4000 - total flux cleaned = -0.000713857 Jy ! Component: 4050 - total flux cleaned = -0.000702413 Jy ! Total flux subtracted in 4096 components = -0.000679444 Jy ! Clean residual min=-0.000697 max=0.000792 Jy/beam ! Clean residual mean=-0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.293592 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 397 components and 0.293592 Jy ![Exited script file: muppet] wmap "J0619-1140_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.163 x 8.081 at -2.197 degrees (North through East) ! Clean map min=-0.0019711 max=0.25047 Jy/beam ! Writing clean map to FITS file: J0619-1140_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.250468 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205726 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.246411 0.246411 0.492821 0.985642 1.97128 3.94257 7.88514 15.7703 31.5406 63.0811 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.25 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.163 x 8.081 at -2.197 degrees (North through East) ! Clean map min=-0.0019711 max=0.25047 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0619-1140_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:58:31 2019