! Started logfile: J0618-2426_S_2017_10_21_pus_uvs.log on Sat May 11 20:52:23 2019 obs J0618-2426_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0618-2426_S_2017_10_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.971498 visibilities/baseline/integration-bin. ! Found source: J0618-2426 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 16088 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0618-2426_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 478 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931198Jy sigma=0.007458 ! Fit after self-cal, rms=0.907006Jy sigma=0.007278 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=14.8 mas, bpa=-21.45 degrees ! Estimated noise=1293.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.071628 Jy ! Component: 100 - total flux cleaned = 0.0875368 Jy ! Total flux subtracted in 100 components = 0.0875368 Jy ! Clean residual min=-0.005047 max=0.006584 Jy/beam ! Clean residual mean=-0.000008 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.0875368 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0875368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101120Jy sigma=0.000723 ! Fit after self-cal, rms=0.101069Jy sigma=0.000723 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=16.76 mas, bpa=-20.42 degrees ! Estimated noise=823.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103784 Jy ! Component: 100 - total flux cleaned = 0.0157002 Jy ! Component: 150 - total flux cleaned = 0.0192476 Jy ! Component: 200 - total flux cleaned = 0.0217235 Jy ! Total flux subtracted in 200 components = 0.0217235 Jy ! Clean residual min=-0.004079 max=0.004981 Jy/beam ! Clean residual mean=-0.000046 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.10926 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 57 components and 0.10926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099904Jy sigma=0.000714 ! Fit after self-cal, rms=0.099967Jy sigma=0.000714 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00 HN 1.00 KP 1.07 ! LA 1.01 MK 1.02 NL 0.91 OV 1.00 ! PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.07 KP 1.05 ! LA 0.96 MK 0.99 NL 1.04 OV 0.98 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.09 HN 1.04 KP 1.02 ! LA 0.74 MK 0.99 NL 1.13 OV 0.96 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 0.98 KP 1.00* ! LA 0.68 MK 1.19 NL 1.00* OV 1.00* ! PT 0.85 ! ! ! Fit before self-cal, rms=0.099967Jy sigma=0.000714 ! Fit after self-cal, rms=0.096455Jy sigma=0.000707 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=17.05 mas, bpa=-20.5 degrees ! Estimated noise=823.442 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000275588 Jy ! Component: 100 - total flux cleaned = -0.000551573 Jy ! Component: 150 - total flux cleaned = -0.000665467 Jy ! Component: 200 - total flux cleaned = -0.000714827 Jy ! Total flux subtracted in 200 components = -0.000714827 Jy ! Clean residual min=-0.003337 max=0.003771 Jy/beam ! Clean residual mean=-0.000011 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.108546 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.108546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096431Jy sigma=0.000707 ! Fit after self-cal, rms=0.096504Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096504Jy sigma=0.000706 ! Fit after self-cal, rms=0.096501Jy sigma=0.000706 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=17.09 mas, bpa=-20.51 degrees ! Estimated noise=820.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000673849 Jy ! Component: 100 - total flux cleaned = -0.000852585 Jy ! Component: 150 - total flux cleaned = -0.000915986 Jy ! Component: 200 - total flux cleaned = -0.000897157 Jy ! Total flux subtracted in 200 components = -0.000897157 Jy ! Clean residual min=-0.003247 max=0.003635 Jy/beam ! Clean residual mean=-0.000010 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.107648 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.107648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096486Jy sigma=0.000706 ! Fit after self-cal, rms=0.096543Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.6211e-06 Jy ! Component: 100 - total flux cleaned = -2.02026e-05 Jy ! Component: 150 - total flux cleaned = -2.00703e-05 Jy ! Component: 200 - total flux cleaned = -3.56735e-05 Jy ! Total flux subtracted in 200 components = -3.56735e-05 Jy ! Clean residual min=-0.003211 max=0.003610 Jy/beam ! Clean residual mean=-0.000011 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.107613 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.107613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096537Jy sigma=0.000706 ! Fit after self-cal, rms=0.096539Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096539Jy sigma=0.000706 ! Fit after self-cal, rms=0.099841Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=17.14 mas, bpa=-20.51 degrees ! Estimated noise=819.407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000552446 Jy ! Component: 100 - total flux cleaned = -0.000651439 Jy ! Component: 150 - total flux cleaned = -0.000634113 Jy ! Component: 200 - total flux cleaned = -0.00063409 Jy ! Total flux subtracted in 200 components = -0.00063409 Jy ! Clean residual min=-0.003627 max=0.003432 Jy/beam ! Clean residual mean=-0.000008 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.106979 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 91 components and 0.106979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099832Jy sigma=0.000704 ! Fit after self-cal, rms=0.100097Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112272 Jy ! Component: 100 - total flux cleaned = -9.4947e-05 Jy ! Component: 150 - total flux cleaned = -9.49473e-05 Jy ! Component: 200 - total flux cleaned = -9.4718e-05 Jy ! Total flux subtracted in 200 components = -9.4718e-05 Jy ! Clean residual min=-0.003557 max=0.003437 Jy/beam ! Clean residual mean=-0.000007 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.106884 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 0.106884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100090Jy sigma=0.000704 ! Fit after self-cal, rms=0.100092Jy sigma=0.000704 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100092Jy sigma=0.000704 ! Fit after self-cal, rms=0.101649Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.985 mas, bmaj=26.39 mas, bpa=-8.781 degrees ! Estimated noise=966.171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000428514 Jy ! Component: 100 - total flux cleaned = -0.000416215 Jy ! Component: 150 - total flux cleaned = -0.000416174 Jy ! Component: 200 - total flux cleaned = -0.00041592 Jy ! Total flux subtracted in 200 components = -0.00041592 Jy ! Clean residual min=-0.004367 max=0.004054 Jy/beam ! Clean residual mean=-0.000014 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.106468 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 103 components and 0.106468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101647Jy sigma=0.000704 ! Fit after self-cal, rms=0.101862Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.0381e-05 Jy ! Component: 100 - total flux cleaned = -2.06261e-05 Jy ! Component: 150 - total flux cleaned = -2.03155e-05 Jy ! Component: 200 - total flux cleaned = -2.91483e-05 Jy ! Total flux subtracted in 200 components = -2.91483e-05 Jy ! Clean residual min=-0.004345 max=0.004044 Jy/beam ! Clean residual mean=-0.000014 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.106439 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 105 components and 0.106439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101863Jy sigma=0.000704 ! Fit after self-cal, rms=0.101861Jy sigma=0.000704 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=17.16 mas, bpa=-20.5 degrees ! Estimated noise=818.534 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 17.16 at -20.5 degrees (North through East) ! Clean map min=-0.0034693 max=0.095573 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.624 mas, bmaj=15.18 mas, bpa=-21.49 degrees ! Estimated noise=1339.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0735878 Jy ! Component: 100 - total flux cleaned = 0.0896809 Jy ! Component: 150 - total flux cleaned = 0.095093 Jy ! Component: 200 - total flux cleaned = 0.0984193 Jy ! Total flux subtracted in 200 components = 0.0984193 Jy ! Clean residual min=-0.005117 max=0.003516 Jy/beam ! Clean residual mean=-0.000000 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.0984193 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0984193 Jy ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=17.16 mas, bpa=-20.5 degrees ! Estimated noise=818.534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371965 Jy ! Component: 100 - total flux cleaned = 0.00566301 Jy ! Component: 150 - total flux cleaned = 0.00612866 Jy ! Component: 200 - total flux cleaned = 0.00645097 Jy ! Total flux subtracted in 200 components = 0.00645097 Jy ! Clean residual min=-0.003887 max=0.003392 Jy/beam ! Clean residual mean=-0.000008 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.10487 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 35 components and 0.10487 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.985 mas, bmaj=26.39 mas, bpa=-8.781 degrees ! Estimated noise=966.171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000951948 Jy ! Component: 100 - total flux cleaned = 0.00107487 Jy ! Component: 150 - total flux cleaned = 0.00117106 Jy ! Component: 200 - total flux cleaned = 0.00123289 Jy ! Total flux subtracted in 200 components = 0.00123289 Jy ! Clean residual min=-0.004429 max=0.004045 Jy/beam ! Clean residual mean=-0.000015 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.106103 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.18295e-05 Jy ! Component: 100 - total flux cleaned = 9.65647e-05 Jy ! Component: 150 - total flux cleaned = 0.000148054 Jy ! Component: 200 - total flux cleaned = 0.000167467 Jy ! Total flux subtracted in 200 components = 0.000167467 Jy ! Clean residual min=-0.004398 max=0.004028 Jy/beam ! Clean residual mean=-0.000014 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 0.106271 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.106271 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=17.16 mas, bpa=-20.5 degrees ! Estimated noise=818.534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000184245 Jy ! Component: 100 - total flux cleaned = -0.000161682 Jy ! Component: 150 - total flux cleaned = -0.000140215 Jy ! Component: 200 - total flux cleaned = -0.000100558 Jy ! Total flux subtracted in 200 components = -0.000100558 Jy ! Clean residual min=-0.003652 max=0.003401 Jy/beam ! Clean residual mean=-0.000007 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.10617 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.10617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101855Jy sigma=0.000704 ! Fit after self-cal, rms=0.101841Jy sigma=0.000704 wmodel J0618-2426_S_2017_10_21_pus_map.mod ! Writing 67 model components to file: J0618-2426_S_2017_10_21_pus_map.mod wobs J0618-2426_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0618-2426_S_2017_10_21_pus_uvs.fits wwins J0618-2426_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0618-2426_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156227 Jy ! Component: 100 - total flux cleaned = 0.000594899 Jy ! Component: 150 - total flux cleaned = 0.000786753 Jy ! Component: 200 - total flux cleaned = 0.00110238 Jy ! Component: 250 - total flux cleaned = 0.00152164 Jy ! Component: 300 - total flux cleaned = 0.00183579 Jy ! Component: 350 - total flux cleaned = 0.00216872 Jy ! Component: 400 - total flux cleaned = 0.00237876 Jy ! Component: 450 - total flux cleaned = 0.00251236 Jy ! Component: 500 - total flux cleaned = 0.00257523 Jy ! Component: 550 - total flux cleaned = 0.0024843 Jy ! Component: 600 - total flux cleaned = 0.00245501 Jy ! Component: 650 - total flux cleaned = 0.00236912 Jy ! Component: 700 - total flux cleaned = 0.00228623 Jy ! Component: 750 - total flux cleaned = 0.00223224 Jy ! Component: 800 - total flux cleaned = 0.00217975 Jy ! Component: 850 - total flux cleaned = 0.00202687 Jy ! Component: 900 - total flux cleaned = 0.00192768 Jy ! Component: 950 - total flux cleaned = 0.00173439 Jy ! Component: 1000 - total flux cleaned = 0.00163939 Jy ! Component: 1050 - total flux cleaned = 0.00152339 Jy ! Component: 1100 - total flux cleaned = 0.00141011 Jy ! Component: 1150 - total flux cleaned = 0.00129932 Jy ! Component: 1200 - total flux cleaned = 0.00125555 Jy ! Component: 1250 - total flux cleaned = 0.00112783 Jy ! Component: 1300 - total flux cleaned = 0.0011071 Jy ! Component: 1350 - total flux cleaned = 0.00100432 Jy ! Component: 1400 - total flux cleaned = 0.000923963 Jy ! Component: 1450 - total flux cleaned = 0.000864502 Jy ! Component: 1500 - total flux cleaned = 0.00080595 Jy ! Component: 1550 - total flux cleaned = 0.000614132 Jy ! Component: 1600 - total flux cleaned = 0.000576294 Jy ! Component: 1650 - total flux cleaned = 0.000465064 Jy ! Component: 1700 - total flux cleaned = 0.000355203 Jy ! Component: 1750 - total flux cleaned = 0.00028282 Jy ! Component: 1800 - total flux cleaned = 0.000158377 Jy ! Component: 1850 - total flux cleaned = 7.09028e-05 Jy ! Component: 1900 - total flux cleaned = 1.63566e-06 Jy ! Component: 1950 - total flux cleaned = -0.000100699 Jy ! Component: 2000 - total flux cleaned = -0.000168417 Jy ! Component: 2050 - total flux cleaned = -0.000234816 Jy ! Component: 2100 - total flux cleaned = -0.00030058 Jy ! Component: 2150 - total flux cleaned = -0.000316888 Jy ! Component: 2200 - total flux cleaned = -0.000333014 Jy ! Component: 2250 - total flux cleaned = -0.000428379 Jy ! Component: 2300 - total flux cleaned = -0.000506439 Jy ! Component: 2350 - total flux cleaned = -0.00047528 Jy ! Component: 2400 - total flux cleaned = -0.000551628 Jy ! Component: 2450 - total flux cleaned = -0.000596835 Jy ! Component: 2500 - total flux cleaned = -0.000626699 Jy ! Component: 2550 - total flux cleaned = -0.000671094 Jy ! Component: 2600 - total flux cleaned = -0.000700198 Jy ! Component: 2650 - total flux cleaned = -0.000757888 Jy ! Component: 2700 - total flux cleaned = -0.000814948 Jy ! Component: 2750 - total flux cleaned = -0.000829065 Jy ! Component: 2800 - total flux cleaned = -0.000856984 Jy ! Component: 2850 - total flux cleaned = -0.00088456 Jy ! Component: 2900 - total flux cleaned = -0.00092551 Jy ! Component: 2950 - total flux cleaned = -0.000979547 Jy ! Component: 3000 - total flux cleaned = -0.000966057 Jy ! Component: 3050 - total flux cleaned = -0.000952859 Jy ! Component: 3100 - total flux cleaned = -0.000952881 Jy ! Component: 3150 - total flux cleaned = -0.000966134 Jy ! Component: 3200 - total flux cleaned = -0.000991757 Jy ! Component: 3250 - total flux cleaned = -0.000928196 Jy ! Component: 3300 - total flux cleaned = -0.000915663 Jy ! Component: 3350 - total flux cleaned = -0.00092822 Jy ! Component: 3400 - total flux cleaned = -0.000915589 Jy ! Component: 3450 - total flux cleaned = -0.000903178 Jy ! Component: 3500 - total flux cleaned = -0.000842412 Jy ! Component: 3550 - total flux cleaned = -0.000806355 Jy ! Component: 3600 - total flux cleaned = -0.000794281 Jy ! Component: 3650 - total flux cleaned = -0.000699626 Jy ! Component: 3700 - total flux cleaned = -0.000676161 Jy ! Component: 3750 - total flux cleaned = -0.000571371 Jy ! Component: 3800 - total flux cleaned = -0.000582874 Jy ! Component: 3850 - total flux cleaned = -0.000468244 Jy ! Component: 3900 - total flux cleaned = -0.000422612 Jy ! Component: 3950 - total flux cleaned = -0.000332537 Jy ! Component: 4000 - total flux cleaned = -0.000287828 Jy ! Component: 4050 - total flux cleaned = -0.000209981 Jy ! Total flux subtracted in 4096 components = -0.000154933 Jy ! Clean residual min=-0.000578 max=0.000573 Jy/beam ! Clean residual mean=0.000000 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.106015 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 370 components and 0.106015 Jy ![Exited script file: muppet] wmap "J0618-2426_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 17.16 at -20.5 degrees (North through East) ! Clean map min=-0.0028472 max=0.095694 Jy/beam ! Writing clean map to FITS file: J0618-2426_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0956944 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209325 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.656228 0.656228 1.31246 2.62491 5.24982 10.4996 20.9993 41.9986 83.9972 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.095 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 17.16 at -20.5 degrees (North through East) ! Clean map min=-0.0028472 max=0.095694 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0618-2426_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:52:28 2019