! Started logfile: J0618-1418_S_2017_10_21_pus_uvs.log on Sat May 11 20:52:18 2019 obs J0618-1418_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0618-1418_S_2017_10_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.733816 visibilities/baseline/integration-bin. ! Found source: J0618-1418 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 12152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0618-1418_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 621 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968081Jy sigma=0.008957 ! Fit after self-cal, rms=0.940650Jy sigma=0.008724 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=16.49 mas, bpa=-19.76 degrees ! Estimated noise=1578.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435776 Jy ! Component: 100 - total flux cleaned = 0.0571139 Jy ! Total flux subtracted in 100 components = 0.0571139 Jy ! Clean residual min=-0.005954 max=0.006754 Jy/beam ! Clean residual mean=-0.000021 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.0571139 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0571139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086911Jy sigma=0.000734 ! Fit after self-cal, rms=0.086560Jy sigma=0.000732 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=18.7 mas, bpa=-18.3 degrees ! Estimated noise=794.569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107467 Jy ! Component: 100 - total flux cleaned = 0.0160206 Jy ! Component: 150 - total flux cleaned = 0.0190126 Jy ! Component: 200 - total flux cleaned = 0.0208564 Jy ! Total flux subtracted in 200 components = 0.0208564 Jy ! Clean residual min=-0.003708 max=0.003454 Jy/beam ! Clean residual mean=-0.000007 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.0779704 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 86 components and 0.0779703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085208Jy sigma=0.000720 ! Fit after self-cal, rms=0.084998Jy sigma=0.000719 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.21 KP 1.14 ! LA 1.02 MK 1.05 NL 0.95 OV 1.12 ! PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.02 KP 1.10 ! LA 0.99 MK 1.05 NL 1.01 OV 1.11 ! PT 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.01 KP 1.04 ! LA 0.83 MK 1.09 NL 1.18 OV 0.96 ! PT 0.87 ! ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.83 KP 1.00* ! LA 1.00* MK 0.92 NL 1.00* OV 1.00* ! PT 0.75 ! ! ! Fit before self-cal, rms=0.084998Jy sigma=0.000719 ! Fit after self-cal, rms=0.084550Jy sigma=0.000714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=18.87 mas, bpa=-18.34 degrees ! Estimated noise=800.193 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363626 Jy ! Component: 100 - total flux cleaned = 6.92412e-05 Jy ! Component: 150 - total flux cleaned = -4.04422e-06 Jy ! Component: 200 - total flux cleaned = -2.51881e-05 Jy ! Total flux subtracted in 200 components = -2.51881e-05 Jy ! Clean residual min=-0.002345 max=0.002296 Jy/beam ! Clean residual mean=-0.000009 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0779451 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 0.0779451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084529Jy sigma=0.000714 ! Fit after self-cal, rms=0.084693Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084693Jy sigma=0.000713 ! Fit after self-cal, rms=0.084806Jy sigma=0.000712 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=18.98 mas, bpa=-18.3 degrees ! Estimated noise=801.348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.50044e-05 Jy ! Component: 100 - total flux cleaned = -0.000187224 Jy ! Component: 150 - total flux cleaned = -0.000320107 Jy ! Component: 200 - total flux cleaned = -0.000369742 Jy ! Total flux subtracted in 200 components = -0.000369742 Jy ! Clean residual min=-0.002233 max=0.002298 Jy/beam ! Clean residual mean=-0.000004 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0775754 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 113 components and 0.0775754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084793Jy sigma=0.000712 ! Fit after self-cal, rms=0.084909Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.30144e-06 Jy ! Component: 100 - total flux cleaned = -7.14022e-05 Jy ! Component: 150 - total flux cleaned = -7.27473e-05 Jy ! Component: 200 - total flux cleaned = -7.32628e-05 Jy ! Total flux subtracted in 200 components = -7.32628e-05 Jy ! Clean residual min=-0.002239 max=0.002343 Jy/beam ! Clean residual mean=-0.000005 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0775021 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 120 components and 0.0775021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084898Jy sigma=0.000711 ! Fit after self-cal, rms=0.084895Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084895Jy sigma=0.000711 ! Fit after self-cal, rms=0.085394Jy sigma=0.000711 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=19.01 mas, bpa=-18.28 degrees ! Estimated noise=801.591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.10644e-05 Jy ! Component: 100 - total flux cleaned = -0.000161893 Jy ! Component: 150 - total flux cleaned = -0.000259287 Jy ! Component: 200 - total flux cleaned = -0.000287315 Jy ! Total flux subtracted in 200 components = -0.000287315 Jy ! Clean residual min=-0.002107 max=0.002285 Jy/beam ! Clean residual mean=-0.000004 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0772148 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 126 components and 0.0772148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085384Jy sigma=0.000711 ! Fit after self-cal, rms=0.085459Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.73478e-05 Jy ! Component: 100 - total flux cleaned = -3.69279e-05 Jy ! Component: 150 - total flux cleaned = -5.17849e-05 Jy ! Component: 200 - total flux cleaned = -5.15328e-05 Jy ! Total flux subtracted in 200 components = -5.15328e-05 Jy ! Clean residual min=-0.002075 max=0.002282 Jy/beam ! Clean residual mean=-0.000004 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0771633 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 132 components and 0.0771633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085452Jy sigma=0.000711 ! Fit after self-cal, rms=0.085441Jy sigma=0.000711 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085441Jy sigma=0.000711 ! Fit after self-cal, rms=0.085696Jy sigma=0.000711 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.059 mas, bmaj=25.65 mas, bpa=-11.82 degrees ! Estimated noise=978.094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000339238 Jy ! Component: 100 - total flux cleaned = -0.000402818 Jy ! Component: 150 - total flux cleaned = -0.000464237 Jy ! Component: 200 - total flux cleaned = -0.000508928 Jy ! Total flux subtracted in 200 components = -0.000508928 Jy ! Clean residual min=-0.002317 max=0.002213 Jy/beam ! Clean residual mean=-0.000006 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0766543 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 140 components and 0.0766543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085694Jy sigma=0.000711 ! Fit after self-cal, rms=0.085726Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169534 Jy ! Component: 100 - total flux cleaned = -0.000226083 Jy ! Component: 150 - total flux cleaned = -0.000256572 Jy ! Component: 200 - total flux cleaned = -0.00029157 Jy ! Total flux subtracted in 200 components = -0.00029157 Jy ! Clean residual min=-0.002307 max=0.002161 Jy/beam ! Clean residual mean=-0.000006 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.0763628 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 146 components and 0.0763628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085724Jy sigma=0.000711 ! Fit after self-cal, rms=0.085717Jy sigma=0.000711 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=19.02 mas, bpa=-18.27 degrees ! Estimated noise=801.266 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.323 x 19.02 at -18.27 degrees (North through East) ! Clean map min=-0.0019775 max=0.059293 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=16.76 mas, bpa=-19.87 degrees ! Estimated noise=1622.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433192 Jy ! Component: 100 - total flux cleaned = 0.0586793 Jy ! Component: 150 - total flux cleaned = 0.0671562 Jy ! Component: 200 - total flux cleaned = 0.072335 Jy ! Total flux subtracted in 200 components = 0.072335 Jy ! Clean residual min=-0.004915 max=0.004327 Jy/beam ! Clean residual mean=-0.000008 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.0723351 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0723351 Jy ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=19.02 mas, bpa=-18.27 degrees ! Estimated noise=801.266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340537 Jy ! Component: 100 - total flux cleaned = 0.0042526 Jy ! Component: 150 - total flux cleaned = 0.0044785 Jy ! Component: 200 - total flux cleaned = 0.00471181 Jy ! Total flux subtracted in 200 components = 0.00471181 Jy ! Clean residual min=-0.002143 max=0.002236 Jy/beam ! Clean residual mean=-0.000004 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0770469 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 67 components and 0.0770469 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.059 mas, bmaj=25.65 mas, bpa=-11.82 degrees ! Estimated noise=978.094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.48785e-05 Jy ! Component: 100 - total flux cleaned = -0.000127218 Jy ! Component: 150 - total flux cleaned = -0.000176879 Jy ! Component: 200 - total flux cleaned = -0.000237703 Jy ! Total flux subtracted in 200 components = -0.000237703 Jy ! Clean residual min=-0.002461 max=0.002354 Jy/beam ! Clean residual mean=-0.000006 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0768092 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.58077e-05 Jy ! Component: 100 - total flux cleaned = -0.0001465 Jy ! Component: 150 - total flux cleaned = -0.000212472 Jy ! Component: 200 - total flux cleaned = -0.000273486 Jy ! Total flux subtracted in 200 components = -0.000273486 Jy ! Clean residual min=-0.002386 max=0.002289 Jy/beam ! Clean residual mean=-0.000006 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0765357 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.0765357 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=19.02 mas, bpa=-18.27 degrees ! Estimated noise=801.266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152612 Jy ! Component: 100 - total flux cleaned = -2.20325e-05 Jy ! Component: 150 - total flux cleaned = -0.00011491 Jy ! Component: 200 - total flux cleaned = -8.824e-05 Jy ! Total flux subtracted in 200 components = -8.824e-05 Jy ! Clean residual min=-0.002139 max=0.002168 Jy/beam ! Clean residual mean=-0.000004 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0764474 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 96 components and 0.0764474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085735Jy sigma=0.000711 ! Fit after self-cal, rms=0.085720Jy sigma=0.000711 wmodel J0618-1418_S_2017_10_21_pus_map.mod ! Writing 96 model components to file: J0618-1418_S_2017_10_21_pus_map.mod wobs J0618-1418_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0618-1418_S_2017_10_21_pus_uvs.fits wwins J0618-1418_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0618-1418_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227423 Jy ! Component: 100 - total flux cleaned = 0.00050473 Jy ! Component: 150 - total flux cleaned = 0.000635758 Jy ! Component: 200 - total flux cleaned = 0.00066591 Jy ! Component: 250 - total flux cleaned = 0.000636987 Jy ! Component: 300 - total flux cleaned = 0.000665745 Jy ! Component: 350 - total flux cleaned = 0.000746194 Jy ! Component: 400 - total flux cleaned = 0.000872487 Jy ! Component: 450 - total flux cleaned = 0.0010189 Jy ! Component: 500 - total flux cleaned = 0.0011858 Jy ! Component: 550 - total flux cleaned = 0.00132385 Jy ! Component: 600 - total flux cleaned = 0.00143568 Jy ! Component: 650 - total flux cleaned = 0.00145821 Jy ! Component: 700 - total flux cleaned = 0.0015228 Jy ! Component: 750 - total flux cleaned = 0.00156452 Jy ! Component: 800 - total flux cleaned = 0.00156463 Jy ! Component: 850 - total flux cleaned = 0.00158449 Jy ! Component: 900 - total flux cleaned = 0.00154478 Jy ! Component: 950 - total flux cleaned = 0.00150644 Jy ! Component: 1000 - total flux cleaned = 0.00152571 Jy ! Component: 1050 - total flux cleaned = 0.00150677 Jy ! Component: 1100 - total flux cleaned = 0.00143363 Jy ! Component: 1150 - total flux cleaned = 0.00139781 Jy ! Component: 1200 - total flux cleaned = 0.00134448 Jy ! Component: 1250 - total flux cleaned = 0.00127472 Jy ! Component: 1300 - total flux cleaned = 0.00122353 Jy ! Component: 1350 - total flux cleaned = 0.00122348 Jy ! Component: 1400 - total flux cleaned = 0.00115674 Jy ! Component: 1450 - total flux cleaned = 0.0011076 Jy ! Component: 1500 - total flux cleaned = 0.00109158 Jy ! Component: 1550 - total flux cleaned = 0.00105979 Jy ! Component: 1600 - total flux cleaned = 0.00102834 Jy ! Component: 1650 - total flux cleaned = 0.000950969 Jy ! Component: 1700 - total flux cleaned = 0.000935577 Jy ! Component: 1750 - total flux cleaned = 0.000935376 Jy ! Component: 1800 - total flux cleaned = 0.000845905 Jy ! Component: 1850 - total flux cleaned = 0.000831469 Jy ! Component: 1900 - total flux cleaned = 0.000831377 Jy ! Component: 1950 - total flux cleaned = 0.000773748 Jy ! Component: 2000 - total flux cleaned = 0.00074537 Jy ! Component: 2050 - total flux cleaned = 0.000745382 Jy ! Component: 2100 - total flux cleaned = 0.00068982 Jy ! Component: 2150 - total flux cleaned = 0.000703378 Jy ! Component: 2200 - total flux cleaned = 0.000676169 Jy ! Component: 2250 - total flux cleaned = 0.000636051 Jy ! Component: 2300 - total flux cleaned = 0.000622817 Jy ! Component: 2350 - total flux cleaned = 0.000609695 Jy ! Component: 2400 - total flux cleaned = 0.000583851 Jy ! Component: 2450 - total flux cleaned = 0.000596815 Jy ! Component: 2500 - total flux cleaned = 0.00059675 Jy ! Component: 2550 - total flux cleaned = 0.000596895 Jy ! Component: 2600 - total flux cleaned = 0.000559529 Jy ! Component: 2650 - total flux cleaned = 0.00053494 Jy ! Component: 2700 - total flux cleaned = 0.000559412 Jy ! Component: 2750 - total flux cleaned = 0.000535085 Jy ! Component: 2800 - total flux cleaned = 0.000535095 Jy ! Component: 2850 - total flux cleaned = 0.000582654 Jy ! Component: 2900 - total flux cleaned = 0.00055897 Jy ! Component: 2950 - total flux cleaned = 0.000559058 Jy ! Component: 3000 - total flux cleaned = 0.000547458 Jy ! Component: 3050 - total flux cleaned = 0.000559076 Jy ! Component: 3100 - total flux cleaned = 0.000559042 Jy ! Component: 3150 - total flux cleaned = 0.000547731 Jy ! Component: 3200 - total flux cleaned = 0.000514073 Jy ! Component: 3250 - total flux cleaned = 0.000503041 Jy ! Component: 3300 - total flux cleaned = 0.000469926 Jy ! Component: 3350 - total flux cleaned = 0.000458975 Jy ! Component: 3400 - total flux cleaned = 0.000437242 Jy ! Component: 3450 - total flux cleaned = 0.000426401 Jy ! Component: 3500 - total flux cleaned = 0.000383438 Jy ! Component: 3550 - total flux cleaned = 0.000351527 Jy ! Component: 3600 - total flux cleaned = 0.000320007 Jy ! Component: 3650 - total flux cleaned = 0.000299207 Jy ! Component: 3700 - total flux cleaned = 0.000288809 Jy ! Component: 3750 - total flux cleaned = 0.000257812 Jy ! Component: 3800 - total flux cleaned = 0.000257721 Jy ! Component: 3850 - total flux cleaned = 0.000217032 Jy ! Component: 3900 - total flux cleaned = 0.000206961 Jy ! Component: 3950 - total flux cleaned = 0.000206961 Jy ! Component: 4000 - total flux cleaned = 0.000187058 Jy ! Component: 4050 - total flux cleaned = 0.000157398 Jy ! Total flux subtracted in 4096 components = 0.000127909 Jy ! Clean residual min=-0.000529 max=0.000572 Jy/beam ! Clean residual mean=0.000001 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.0765753 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 360 components and 0.0765754 Jy ![Exited script file: muppet] wmap "J0618-1418_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.323 x 19.02 at -18.27 degrees (North through East) ! Clean map min=-0.0016495 max=0.059701 Jy/beam ! Writing clean map to FITS file: J0618-1418_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.059701 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180769 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.90837 0.90837 1.81674 3.63348 7.26696 14.5339 29.0678 58.1357 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.323 x 19.02 at -18.27 degrees (North through East) ! Clean map min=-0.0016495 max=0.059701 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0618-1418_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:52:23 2019