! Started logfile: J0618-1418_S_2017_05_27_pus_uvs.log on Fri May 3 10:58:19 2019 obs J0618-1418_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0618-1418_S_2017_05_27_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970292 visibilities/baseline/integration-bin. ! Found source: J0618-1418 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 16592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0618-1418_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 492 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.978067Jy sigma=0.006809 ! Fit after self-cal, rms=0.937826Jy sigma=0.006640 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.727 mas, bmaj=7.032 mas, bpa=-2.813 degrees ! Estimated noise=1307.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.051969 Jy ! Component: 100 - total flux cleaned = 0.0644852 Jy ! Total flux subtracted in 100 components = 0.0644852 Jy ! Clean residual min=-0.005005 max=0.006520 Jy/beam ! Clean residual mean=-0.000034 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 0.0644852 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0644852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133116Jy sigma=0.000669 ! Fit after self-cal, rms=0.132713Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=8.309 mas, bpa=-2.727 degrees ! Estimated noise=914.336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00718739 Jy ! Component: 100 - total flux cleaned = 0.0110916 Jy ! Component: 150 - total flux cleaned = 0.0126502 Jy ! Component: 200 - total flux cleaned = 0.0132918 Jy ! Total flux subtracted in 200 components = 0.0132918 Jy ! Clean residual min=-0.003730 max=0.003787 Jy/beam ! Clean residual mean=-0.000014 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.0777771 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 35 components and 0.0777771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132090Jy sigma=0.000664 ! Fit after self-cal, rms=0.132019Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.89 HN 1.11 KP 0.98 ! LA 0.93 MK 1.03 NL 0.89 OV 1.34 ! PT 1.09 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.98 HN 1.13 KP 0.99 ! LA 0.94 MK 1.00 NL 1.00 OV 1.01 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.95 HN 1.13 KP 0.98 ! LA 0.96 MK 0.99 NL 1.02 OV 0.91 ! PT 0.96 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.94 KP 1.00* ! LA 0.79 MK 0.87 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.132019Jy sigma=0.000663 ! Fit after self-cal, rms=0.133866Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=8.336 mas, bpa=-2.938 degrees ! Estimated noise=911.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121689 Jy ! Component: 100 - total flux cleaned = 0.00113381 Jy ! Component: 150 - total flux cleaned = 0.00106132 Jy ! Component: 200 - total flux cleaned = 0.00106107 Jy ! Total flux subtracted in 200 components = 0.00106107 Jy ! Clean residual min=-0.003166 max=0.002543 Jy/beam ! Clean residual mean=0.000003 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.0788381 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 50 components and 0.0788381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133668Jy sigma=0.000660 ! Fit after self-cal, rms=0.133727Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133727Jy sigma=0.000659 ! Fit after self-cal, rms=0.118488Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=8.205 mas, bpa=-3.348 degrees ! Estimated noise=904.458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131143 Jy ! Component: 100 - total flux cleaned = 0.00149136 Jy ! Component: 150 - total flux cleaned = 0.00149349 Jy ! Component: 200 - total flux cleaned = 0.00149415 Jy ! Total flux subtracted in 200 components = 0.00149415 Jy ! Clean residual min=-0.002387 max=0.002251 Jy/beam ! Clean residual mean=-0.000003 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0803323 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.0803323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118448Jy sigma=0.000657 ! Fit after self-cal, rms=0.118377Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332419 Jy ! Component: 100 - total flux cleaned = 0.000407908 Jy ! Component: 150 - total flux cleaned = 0.000472283 Jy ! Component: 200 - total flux cleaned = 0.000500682 Jy ! Total flux subtracted in 200 components = 0.000500682 Jy ! Clean residual min=-0.002368 max=0.002215 Jy/beam ! Clean residual mean=-0.000002 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.080833 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.080833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118342Jy sigma=0.000657 ! Fit after self-cal, rms=0.118323Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118323Jy sigma=0.000657 ! Fit after self-cal, rms=0.117604Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.247 mas, bmaj=8.164 mas, bpa=-3.177 degrees ! Estimated noise=901.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00054276 Jy ! Component: 100 - total flux cleaned = 0.000694755 Jy ! Component: 150 - total flux cleaned = 0.000773405 Jy ! Component: 200 - total flux cleaned = 0.000749249 Jy ! Total flux subtracted in 200 components = 0.000749249 Jy ! Clean residual min=-0.002372 max=0.002165 Jy/beam ! Clean residual mean=-0.000004 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0815822 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.0815822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117582Jy sigma=0.000657 ! Fit after self-cal, rms=0.117569Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244635 Jy ! Component: 100 - total flux cleaned = 0.000220743 Jy ! Component: 150 - total flux cleaned = 0.00022069 Jy ! Component: 200 - total flux cleaned = 0.000198627 Jy ! Total flux subtracted in 200 components = 0.000198627 Jy ! Clean residual min=-0.002343 max=0.002160 Jy/beam ! Clean residual mean=-0.000003 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0817808 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.0817808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117553Jy sigma=0.000657 ! Fit after self-cal, rms=0.117544Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117544Jy sigma=0.000657 ! Fit after self-cal, rms=0.117723Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.528 mas, bmaj=15.33 mas, bpa=-2.304 degrees ! Estimated noise=1101.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000523396 Jy ! Component: 100 - total flux cleaned = 0.00062511 Jy ! Component: 150 - total flux cleaned = 0.000634722 Jy ! Component: 200 - total flux cleaned = 0.000652402 Jy ! Total flux subtracted in 200 components = 0.000652402 Jy ! Clean residual min=-0.001877 max=0.001972 Jy/beam ! Clean residual mean=-0.000008 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0824332 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 80 components and 0.0824332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117719Jy sigma=0.000656 ! Fit after self-cal, rms=0.117723Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120145 Jy ! Component: 100 - total flux cleaned = 0.000110757 Jy ! Component: 150 - total flux cleaned = 0.000119225 Jy ! Component: 200 - total flux cleaned = 0.000135363 Jy ! Total flux subtracted in 200 components = 0.000135363 Jy ! Clean residual min=-0.001863 max=0.001963 Jy/beam ! Clean residual mean=-0.000007 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0825686 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 83 components and 0.0825686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117720Jy sigma=0.000656 ! Fit after self-cal, rms=0.117718Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.145 mas, bpa=-2.967 degrees ! Estimated noise=900.594 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 8.145 at -2.967 degrees (North through East) ! Clean map min=-0.0022069 max=0.065071 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.727 mas, bmaj=6.948 mas, bpa=-3.468 degrees ! Estimated noise=1272.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503838 Jy ! Component: 100 - total flux cleaned = 0.063286 Jy ! Component: 150 - total flux cleaned = 0.0707905 Jy ! Component: 200 - total flux cleaned = 0.0760518 Jy ! Total flux subtracted in 200 components = 0.0760518 Jy ! Clean residual min=-0.003763 max=0.003996 Jy/beam ! Clean residual mean=-0.000014 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.0760518 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0760518 Jy ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.145 mas, bpa=-2.967 degrees ! Estimated noise=900.594 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373548 Jy ! Component: 100 - total flux cleaned = 0.00466225 Jy ! Component: 150 - total flux cleaned = 0.00489041 Jy ! Component: 200 - total flux cleaned = 0.00495737 Jy ! Total flux subtracted in 200 components = 0.00495737 Jy ! Clean residual min=-0.002415 max=0.002143 Jy/beam ! Clean residual mean=-0.000006 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0810092 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.0810092 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.528 mas, bmaj=15.33 mas, bpa=-2.304 degrees ! Estimated noise=1101.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000911211 Jy ! Component: 100 - total flux cleaned = 0.00106747 Jy ! Component: 150 - total flux cleaned = 0.00117173 Jy ! Component: 200 - total flux cleaned = 0.00121828 Jy ! Total flux subtracted in 200 components = 0.00121828 Jy ! Clean residual min=-0.001949 max=0.001951 Jy/beam ! Clean residual mean=-0.000008 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0822275 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.32244e-05 Jy ! Component: 100 - total flux cleaned = 8.35929e-05 Jy ! Component: 150 - total flux cleaned = 0.000121224 Jy ! Component: 200 - total flux cleaned = 0.00015639 Jy ! Total flux subtracted in 200 components = 0.00015639 Jy ! Clean residual min=-0.001894 max=0.001957 Jy/beam ! Clean residual mean=-0.000008 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0823838 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 52 components and 0.0823838 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.145 mas, bpa=-2.967 degrees ! Estimated noise=900.594 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000330204 Jy ! Component: 100 - total flux cleaned = -0.000329322 Jy ! Component: 150 - total flux cleaned = -0.000415038 Jy ! Component: 200 - total flux cleaned = -0.000414004 Jy ! Total flux subtracted in 200 components = -0.000414004 Jy ! Clean residual min=-0.002219 max=0.002153 Jy/beam ! Clean residual mean=-0.000005 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0819698 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.0819698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117807Jy sigma=0.000657 ! Fit after self-cal, rms=0.117825Jy sigma=0.000656 wmodel J0618-1418_S_2017_05_27_pus_map.mod ! Writing 59 model components to file: J0618-1418_S_2017_05_27_pus_map.mod wobs J0618-1418_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0618-1418_S_2017_05_27_pus_uvs.fits wwins J0618-1418_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0618-1418_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000623208 Jy ! Component: 100 - total flux cleaned = -0.000996305 Jy ! Component: 150 - total flux cleaned = -0.00131016 Jy ! Component: 200 - total flux cleaned = -0.00147582 Jy ! Component: 250 - total flux cleaned = -0.0016683 Jy ! Component: 300 - total flux cleaned = -0.00166811 Jy ! Component: 350 - total flux cleaned = -0.00160911 Jy ! Component: 400 - total flux cleaned = -0.00160935 Jy ! Component: 450 - total flux cleaned = -0.00155145 Jy ! Component: 500 - total flux cleaned = -0.00149552 Jy ! Component: 550 - total flux cleaned = -0.00144126 Jy ! Component: 600 - total flux cleaned = -0.00144161 Jy ! Component: 650 - total flux cleaned = -0.00144157 Jy ! Component: 700 - total flux cleaned = -0.00138982 Jy ! Component: 750 - total flux cleaned = -0.00133894 Jy ! Component: 800 - total flux cleaned = -0.00133901 Jy ! Component: 850 - total flux cleaned = -0.00131449 Jy ! Component: 900 - total flux cleaned = -0.00136281 Jy ! Component: 950 - total flux cleaned = -0.00129089 Jy ! Component: 1000 - total flux cleaned = -0.00140879 Jy ! Component: 1050 - total flux cleaned = -0.00129329 Jy ! Component: 1100 - total flux cleaned = -0.00138508 Jy ! Component: 1150 - total flux cleaned = -0.00133998 Jy ! Component: 1200 - total flux cleaned = -0.00125078 Jy ! Component: 1250 - total flux cleaned = -0.0012288 Jy ! Component: 1300 - total flux cleaned = -0.00122832 Jy ! Component: 1350 - total flux cleaned = -0.00114271 Jy ! Component: 1400 - total flux cleaned = -0.00116377 Jy ! Component: 1450 - total flux cleaned = -0.00114291 Jy ! Component: 1500 - total flux cleaned = -0.00114302 Jy ! Component: 1550 - total flux cleaned = -0.00112254 Jy ! Component: 1600 - total flux cleaned = -0.00118262 Jy ! Component: 1650 - total flux cleaned = -0.0012424 Jy ! Component: 1700 - total flux cleaned = -0.0012816 Jy ! Component: 1750 - total flux cleaned = -0.00141743 Jy ! Component: 1800 - total flux cleaned = -0.00137854 Jy ! Component: 1850 - total flux cleaned = -0.00147401 Jy ! Component: 1900 - total flux cleaned = -0.00154929 Jy ! Component: 1950 - total flux cleaned = -0.00164254 Jy ! Component: 2000 - total flux cleaned = -0.00166071 Jy ! Component: 2050 - total flux cleaned = -0.00164249 Jy ! Component: 2100 - total flux cleaned = -0.00164275 Jy ! Component: 2150 - total flux cleaned = -0.00173285 Jy ! Component: 2200 - total flux cleaned = -0.0017503 Jy ! Component: 2250 - total flux cleaned = -0.00166205 Jy ! Component: 2300 - total flux cleaned = -0.00169719 Jy ! Component: 2350 - total flux cleaned = -0.00166241 Jy ! Component: 2400 - total flux cleaned = -0.00161088 Jy ! Component: 2450 - total flux cleaned = -0.00164502 Jy ! Component: 2500 - total flux cleaned = -0.00156074 Jy ! Component: 2550 - total flux cleaned = -0.00157772 Jy ! Component: 2600 - total flux cleaned = -0.00157766 Jy ! Component: 2650 - total flux cleaned = -0.00157765 Jy ! Component: 2700 - total flux cleaned = -0.00152875 Jy ! Component: 2750 - total flux cleaned = -0.00151257 Jy ! Component: 2800 - total flux cleaned = -0.00148034 Jy ! Component: 2850 - total flux cleaned = -0.00148028 Jy ! Component: 2900 - total flux cleaned = -0.00146447 Jy ! Component: 2950 - total flux cleaned = -0.00140164 Jy ! Component: 3000 - total flux cleaned = -0.0013081 Jy ! Component: 3050 - total flux cleaned = -0.00127738 Jy ! Component: 3100 - total flux cleaned = -0.00126204 Jy ! Component: 3150 - total flux cleaned = -0.00123154 Jy ! Component: 3200 - total flux cleaned = -0.0011861 Jy ! Component: 3250 - total flux cleaned = -0.00114106 Jy ! Component: 3300 - total flux cleaned = -0.00114109 Jy ! Component: 3350 - total flux cleaned = -0.00106709 Jy ! Component: 3400 - total flux cleaned = -0.00109649 Jy ! Component: 3450 - total flux cleaned = -0.00105265 Jy ! Component: 3500 - total flux cleaned = -0.00102377 Jy ! Component: 3550 - total flux cleaned = -0.00105265 Jy ! Component: 3600 - total flux cleaned = -0.00102405 Jy ! Component: 3650 - total flux cleaned = -0.00105238 Jy ! Component: 3700 - total flux cleaned = -0.00103815 Jy ! Component: 3750 - total flux cleaned = -0.00099595 Jy ! Component: 3800 - total flux cleaned = -0.000926155 Jy ! Component: 3850 - total flux cleaned = -0.000898426 Jy ! Component: 3900 - total flux cleaned = -0.000898554 Jy ! Component: 3950 - total flux cleaned = -0.000884871 Jy ! Component: 4000 - total flux cleaned = -0.000830388 Jy ! Component: 4050 - total flux cleaned = -0.000735687 Jy ! Total flux subtracted in 4096 components = -0.00076252 Jy ! Clean residual min=-0.000714 max=0.000747 Jy/beam ! Clean residual mean=-0.000000 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0812073 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 308 components and 0.0812073 Jy ![Exited script file: muppet] wmap "J0618-1418_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 8.145 at -2.967 degrees (North through East) ! Clean map min=-0.0020677 max=0.064762 Jy/beam ! Writing clean map to FITS file: J0618-1418_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0647624 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000238076 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.10284 1.10284 2.20569 4.41138 8.82275 17.6455 35.291 70.582 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 8.145 at -2.967 degrees (North through East) ! Clean map min=-0.0020677 max=0.064762 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0618-1418_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:58:24 2019