! Started logfile: J0617-3634_S_2017_09_26_pus_uvs.log on Sat May 11 12:55:19 2019 obs J0617-3634_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0617-3634_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.290678 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0617-3634 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 12348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0617-3634_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1331 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2574 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.822158Jy sigma=0.005306 ! Fit after self-cal, rms=0.785643Jy sigma=0.005122 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=26.82 mas, bpa=-13.71 degrees ! Estimated noise=2467.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168279 Jy ! Component: 100 - total flux cleaned = 0.205355 Jy ! Total flux subtracted in 100 components = 0.205355 Jy ! Clean residual min=-0.049515 max=0.049481 Jy/beam ! Clean residual mean=-0.001414 rms=0.019283 Jy/beam ! Combined flux in latest and established models = 0.205355 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.205355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213674Jy sigma=0.001368 ! Fit after self-cal, rms=0.213268Jy sigma=0.001364 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.094 mas, bmaj=29.49 mas, bpa=-12.68 degrees ! Estimated noise=1198.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805856 Jy ! Component: 100 - total flux cleaned = 0.103711 Jy ! Component: 150 - total flux cleaned = 0.10632 Jy ! Component: 200 - total flux cleaned = 0.107874 Jy ! Total flux subtracted in 200 components = 0.107874 Jy ! Clean residual min=-0.027483 max=0.027121 Jy/beam ! Clean residual mean=-0.002287 rms=0.015842 Jy/beam ! Combined flux in latest and established models = 0.31323 Jy ! Performing phase self-cal ! Adding 135 model components to the UV plane model. ! The established model now contains 182 components and 0.31323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142970Jy sigma=0.000915 ! Fit after self-cal, rms=0.141566Jy sigma=0.000906 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.00* KP 1.11 ! LA 0.81 MK 1.11 NL 1.00* OV 0.94 ! PT 0.83 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 1.00* KP 1.08 ! LA 0.84 MK 1.13 NL 1.00* OV 1.00 ! PT 0.82 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00 ! LA 0.83 MK 1.08 NL 1.00* OV 1.03 ! PT 0.80 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.141566Jy sigma=0.000906 ! Fit after self-cal, rms=0.106394Jy sigma=0.000776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.375 mas, bmaj=29.32 mas, bpa=-12.28 degrees ! Estimated noise=1042.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128236 Jy ! Component: 100 - total flux cleaned = -0.00476217 Jy ! Component: 150 - total flux cleaned = -0.0115647 Jy ! Component: 200 - total flux cleaned = -0.0196434 Jy ! Total flux subtracted in 200 components = -0.0196434 Jy ! Clean residual min=-0.009033 max=0.008897 Jy/beam ! Clean residual mean=-0.000367 rms=0.003998 Jy/beam ! Combined flux in latest and established models = 0.293586 Jy ! Performing phase self-cal ! Adding 97 model components to the UV plane model. ! The established model now contains 279 components and 0.293586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094687Jy sigma=0.000665 ! Fit after self-cal, rms=0.094661Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094661Jy sigma=0.000663 ! Fit after self-cal, rms=0.093837Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.389 mas, bmaj=29.32 mas, bpa=-12.16 degrees ! Estimated noise=1039.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00542287 Jy ! Component: 100 - total flux cleaned = 0.01024 Jy ! Component: 150 - total flux cleaned = 0.0141988 Jy ! Component: 200 - total flux cleaned = 0.0173123 Jy ! Total flux subtracted in 200 components = 0.0173123 Jy ! Clean residual min=-0.002958 max=0.002977 Jy/beam ! Clean residual mean=0.000004 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 0.310899 Jy selfcal ! Performing phase self-cal ! Adding 101 model components to the UV plane model. ! The established model now contains 379 components and 0.310899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092488Jy sigma=0.000637 ! Fit after self-cal, rms=0.092394Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373578 Jy ! Component: 100 - total flux cleaned = 0.00635475 Jy ! Component: 150 - total flux cleaned = 0.00699849 Jy ! Component: 200 - total flux cleaned = 0.0066732 Jy ! Total flux subtracted in 200 components = 0.0066732 Jy ! Clean residual min=-0.001728 max=0.001718 Jy/beam ! Clean residual mean=0.000003 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.317572 Jy ! Performing phase self-cal ! Adding 103 model components to the UV plane model. ! The established model now contains 470 components and 0.317572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092025Jy sigma=0.000634 ! Fit after self-cal, rms=0.091998Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091998Jy sigma=0.000634 ! Fit after self-cal, rms=0.091934Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.389 mas, bmaj=29.27 mas, bpa=-12.15 degrees ! Estimated noise=1037.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112898 Jy ! Component: 100 - total flux cleaned = 0.00168731 Jy ! Component: 150 - total flux cleaned = 0.00193841 Jy ! Component: 200 - total flux cleaned = 0.00194503 Jy ! Total flux subtracted in 200 components = 0.00194503 Jy ! Clean residual min=-0.001159 max=0.001162 Jy/beam ! Clean residual mean=0.000009 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.319517 Jy selfcal ! Performing phase self-cal ! Adding 80 model components to the UV plane model. ! The established model now contains 536 components and 0.319517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091772Jy sigma=0.000632 ! Fit after self-cal, rms=0.091768Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206555 Jy ! Component: 100 - total flux cleaned = 0.000325605 Jy ! Component: 150 - total flux cleaned = 0.000329135 Jy ! Component: 200 - total flux cleaned = 0.000438106 Jy ! Total flux subtracted in 200 components = 0.000438106 Jy ! Clean residual min=-0.000864 max=0.000867 Jy/beam ! Clean residual mean=0.000001 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.319955 Jy ! Performing phase self-cal ! Adding 93 model components to the UV plane model. ! The established model now contains 613 components and 0.319955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091696Jy sigma=0.000632 ! Fit after self-cal, rms=0.091693Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091693Jy sigma=0.000632 ! Fit after self-cal, rms=0.091663Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.84 mas, bmaj=34.21 mas, bpa=-0.4369 degrees ! Estimated noise=1161.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104054 Jy ! Component: 100 - total flux cleaned = 0.000219535 Jy ! Component: 150 - total flux cleaned = 0.00011232 Jy ! Component: 200 - total flux cleaned = 0.000164079 Jy ! Total flux subtracted in 200 components = 0.000164079 Jy ! Clean residual min=-0.000797 max=0.000799 Jy/beam ! Clean residual mean=0.000006 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.320119 Jy selfcal ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 681 components and 0.320119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091610Jy sigma=0.000631 ! Fit after self-cal, rms=0.091605Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022788 Jy ! Component: 100 - total flux cleaned = -0.000317761 Jy ! Component: 150 - total flux cleaned = -0.000488034 Jy ! Component: 200 - total flux cleaned = -0.000529166 Jy ! Total flux subtracted in 200 components = -0.000529166 Jy ! Clean residual min=-0.000670 max=0.000672 Jy/beam ! Clean residual mean=0.000001 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.31959 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 735 components and 0.31959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091575Jy sigma=0.000631 ! Fit after self-cal, rms=0.091570Jy sigma=0.000631 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.388 mas, bmaj=29.23 mas, bpa=-12.15 degrees ! Estimated noise=1036.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.388 x 29.23 at -12.15 degrees (North through East) ! Clean map min=-0.03403 max=0.20318 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=26.37 mas, bpa=-13.18 degrees ! Estimated noise=2261.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1322 Jy ! Component: 100 - total flux cleaned = 0.173479 Jy ! Component: 150 - total flux cleaned = 0.205424 Jy ! Component: 200 - total flux cleaned = 0.22155 Jy ! Total flux subtracted in 200 components = 0.22155 Jy ! Clean residual min=-0.029070 max=0.029322 Jy/beam ! Clean residual mean=-0.000671 rms=0.012084 Jy/beam ! Combined flux in latest and established models = 0.22155 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 96 model components to the UV plane model. ! The established model now contains 96 components and 0.22155 Jy ! Inverting map and beam ! Estimated beam: bmin=4.388 mas, bmaj=29.23 mas, bpa=-12.15 degrees ! Estimated noise=1036.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0452409 Jy ! Component: 100 - total flux cleaned = 0.0504539 Jy ! Component: 150 - total flux cleaned = 0.0518503 Jy ! Component: 200 - total flux cleaned = 0.0506337 Jy ! Total flux subtracted in 200 components = 0.0506337 Jy ! Clean residual min=-0.014813 max=0.014688 Jy/beam ! Clean residual mean=-0.000742 rms=0.007662 Jy/beam ! Combined flux in latest and established models = 0.272184 Jy ! Adding 124 model components to the UV plane model. ! The established model now contains 210 components and 0.272184 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.84 mas, bmaj=34.21 mas, bpa=-0.4369 degrees ! Estimated noise=1161.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00517846 Jy ! Component: 100 - total flux cleaned = 0.00930728 Jy ! Component: 150 - total flux cleaned = 0.0106161 Jy ! Component: 200 - total flux cleaned = 0.0117688 Jy ! Total flux subtracted in 200 components = 0.0117688 Jy ! Clean residual min=-0.008567 max=0.008511 Jy/beam ! Clean residual mean=-0.000504 rms=0.004809 Jy/beam ! Combined flux in latest and established models = 0.283953 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0009673 Jy ! Component: 100 - total flux cleaned = 0.000223736 Jy ! Component: 150 - total flux cleaned = 0.00166089 Jy ! Component: 200 - total flux cleaned = 0.00291993 Jy ! Total flux subtracted in 200 components = 0.00291993 Jy ! Clean residual min=-0.005178 max=0.005089 Jy/beam ! Clean residual mean=-0.000314 rms=0.002696 Jy/beam ! Combined flux in latest and established models = 0.286873 Jy ! Adding 237 model components to the UV plane model. ! The established model now contains 435 components and 0.286873 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.388 mas, bmaj=29.23 mas, bpa=-12.15 degrees ! Estimated noise=1036.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176686 Jy ! Component: 100 - total flux cleaned = 0.000680585 Jy ! Component: 150 - total flux cleaned = -0.0016276 Jy ! Component: 200 - total flux cleaned = -0.00267657 Jy ! Total flux subtracted in 200 components = -0.00267657 Jy ! Clean residual min=-0.002071 max=0.002056 Jy/beam ! Clean residual mean=-0.000061 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.284196 Jy selfcal ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 524 components and 0.284196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091872Jy sigma=0.000634 ! Fit after self-cal, rms=0.091790Jy sigma=0.000633 wmodel J0617-3634_S_2017_09_26_pus_map.mod ! Writing 524 model components to file: J0617-3634_S_2017_09_26_pus_map.mod wobs J0617-3634_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0617-3634_S_2017_09_26_pus_uvs.fits wwins J0617-3634_S_2017_09_26_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0617-3634_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.388 x 29.23 at -12.15 degrees (North through East) ! Clean map min=-0.034013 max=0.17956 Jy/beam ! Writing clean map to FITS file: J0617-3634_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.179565 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000949483 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.58631 1.58631 3.17261 6.34523 12.6905 25.3809 50.7618 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.179 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.388 x 29.23 at -12.15 degrees (North through East) ! Clean map min=-0.034013 max=0.17956 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0617-3634_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:55:23 2019