! Started logfile: J0617-2200_S_2017_08_05_pus_uvs.log on Thu May 9 19:22:28 2019 obs J0617-2200_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0617-2200_S_2017_08_05_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.759524 visibilities/baseline/integration-bin. ! Found source: J0617-2200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 7656 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0617-2200_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 354 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.840858Jy sigma=0.006186 ! Fit after self-cal, rms=0.823870Jy sigma=0.006075 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.335 mas, bmaj=7.15 mas, bpa=-6.438 degrees ! Estimated noise=1878.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138775 Jy ! Component: 100 - total flux cleaned = 0.169752 Jy ! Total flux subtracted in 100 components = 0.169752 Jy ! Clean residual min=-0.006633 max=0.010423 Jy/beam ! Clean residual mean=0.000014 rms=0.001862 Jy/beam ! Combined flux in latest and established models = 0.169753 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.169753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100799Jy sigma=0.000692 ! Fit after self-cal, rms=0.100796Jy sigma=0.000692 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=8.061 mas, bpa=-6.228 degrees ! Estimated noise=1252.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132218 Jy ! Component: 100 - total flux cleaned = 0.0203734 Jy ! Component: 150 - total flux cleaned = 0.0245628 Jy ! Component: 200 - total flux cleaned = 0.0270278 Jy ! Total flux subtracted in 200 components = 0.0270278 Jy ! Clean residual min=-0.004700 max=0.006459 Jy/beam ! Clean residual mean=0.000004 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.19678 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 0.19678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098838Jy sigma=0.000680 ! Fit after self-cal, rms=0.098857Jy sigma=0.000680 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.04 KP 1.02 ! LA 1.04 MK 0.97 NL 0.87 OV 1.00 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.10 KP 0.96 ! LA 1.02 MK 0.99 NL 1.04 OV 1.05 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.07 KP 0.87 ! LA 0.77 MK 1.03 NL 1.18 OV 0.98 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.05 KP 1.00* ! LA 1.00* MK 1.09 NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.098857Jy sigma=0.000680 ! Fit after self-cal, rms=0.095782Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=8.071 mas, bpa=-6.011 degrees ! Estimated noise=1253.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000444398 Jy ! Component: 100 - total flux cleaned = -0.000451969 Jy ! Component: 150 - total flux cleaned = -0.000429272 Jy ! Component: 200 - total flux cleaned = -0.000449063 Jy ! Total flux subtracted in 200 components = -0.000449063 Jy ! Clean residual min=-0.004069 max=0.004916 Jy/beam ! Clean residual mean=-0.000004 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.196331 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.196331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095760Jy sigma=0.000667 ! Fit after self-cal, rms=0.095747Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095747Jy sigma=0.000666 ! Fit after self-cal, rms=0.095777Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=8.068 mas, bpa=-5.93 degrees ! Estimated noise=1254.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112697 Jy ! Component: 100 - total flux cleaned = 1.81601e-06 Jy ! Component: 150 - total flux cleaned = 0.000108052 Jy ! Component: 200 - total flux cleaned = 0.000152013 Jy ! Total flux subtracted in 200 components = 0.000152013 Jy ! Clean residual min=-0.003885 max=0.004771 Jy/beam ! Clean residual mean=-0.000006 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.196483 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.196483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095768Jy sigma=0.000665 ! Fit after self-cal, rms=0.095769Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425051 Jy ! Component: 100 - total flux cleaned = 0.00541954 Jy ! Component: 150 - total flux cleaned = 0.00547357 Jy ! Component: 200 - total flux cleaned = 0.00542742 Jy ! Total flux subtracted in 200 components = 0.00542742 Jy ! Clean residual min=-0.003395 max=0.003233 Jy/beam ! Clean residual mean=-0.000003 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.201911 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.201911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095585Jy sigma=0.000664 ! Fit after self-cal, rms=0.095567Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095567Jy sigma=0.000664 ! Fit after self-cal, rms=0.095458Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=8.05 mas, bpa=-5.938 degrees ! Estimated noise=1254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191344 Jy ! Component: 100 - total flux cleaned = 0.00248808 Jy ! Component: 150 - total flux cleaned = 0.00248682 Jy ! Component: 200 - total flux cleaned = 0.00245317 Jy ! Total flux subtracted in 200 components = 0.00245317 Jy ! Clean residual min=-0.003143 max=0.003010 Jy/beam ! Clean residual mean=-0.000010 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.204364 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 0.204364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095411Jy sigma=0.000662 ! Fit after self-cal, rms=0.095420Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504488 Jy ! Component: 100 - total flux cleaned = 0.000536806 Jy ! Component: 150 - total flux cleaned = 0.000510266 Jy ! Component: 200 - total flux cleaned = 0.000535913 Jy ! Total flux subtracted in 200 components = 0.000535913 Jy ! Clean residual min=-0.003048 max=0.002925 Jy/beam ! Clean residual mean=-0.000010 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.2049 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 83 components and 0.2049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095402Jy sigma=0.000662 ! Fit after self-cal, rms=0.095402Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095402Jy sigma=0.000662 ! Fit after self-cal, rms=0.095314Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.21 mas, bmaj=18.95 mas, bpa=-3.083 degrees ! Estimated noise=1663.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000563563 Jy ! Component: 100 - total flux cleaned = 0.000612713 Jy ! Component: 150 - total flux cleaned = 0.000709232 Jy ! Component: 200 - total flux cleaned = 0.000773586 Jy ! Total flux subtracted in 200 components = 0.000773586 Jy ! Clean residual min=-0.004315 max=0.003608 Jy/beam ! Clean residual mean=-0.000027 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.205673 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 98 components and 0.205673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095306Jy sigma=0.000662 ! Fit after self-cal, rms=0.095296Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.20285e-05 Jy ! Component: 100 - total flux cleaned = 5.96209e-05 Jy ! Component: 150 - total flux cleaned = 0.000105325 Jy ! Component: 200 - total flux cleaned = 0.000105608 Jy ! Total flux subtracted in 200 components = 0.000105608 Jy ! Clean residual min=-0.004293 max=0.003606 Jy/beam ! Clean residual mean=-0.000027 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.205779 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.205779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095294Jy sigma=0.000662 ! Fit after self-cal, rms=0.095292Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.82 mas, bmaj=8.046 mas, bpa=-5.922 degrees ! Estimated noise=1254.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.82 x 8.046 at -5.922 degrees (North through East) ! Clean map min=-0.0029924 max=0.17623 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.346 mas, bmaj=7.124 mas, bpa=-6.026 degrees ! Estimated noise=1883.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138892 Jy ! Component: 100 - total flux cleaned = 0.169847 Jy ! Component: 150 - total flux cleaned = 0.180839 Jy ! Component: 200 - total flux cleaned = 0.187448 Jy ! Total flux subtracted in 200 components = 0.187448 Jy ! Clean residual min=-0.004884 max=0.005096 Jy/beam ! Clean residual mean=-0.000005 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.187448 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.187448 Jy ! Inverting map and beam ! Estimated beam: bmin=2.82 mas, bmaj=8.046 mas, bpa=-5.922 degrees ! Estimated noise=1254.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00687122 Jy ! Component: 100 - total flux cleaned = 0.0107942 Jy ! Component: 150 - total flux cleaned = 0.0133688 Jy ! Component: 200 - total flux cleaned = 0.0151609 Jy ! Total flux subtracted in 200 components = 0.0151609 Jy ! Clean residual min=-0.003206 max=0.002933 Jy/beam ! Clean residual mean=-0.000013 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.202608 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 62 components and 0.202608 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.21 mas, bmaj=18.95 mas, bpa=-3.083 degrees ! Estimated noise=1663.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175317 Jy ! Component: 100 - total flux cleaned = 0.00256274 Jy ! Component: 150 - total flux cleaned = 0.00272898 Jy ! Component: 200 - total flux cleaned = 0.00276072 Jy ! Total flux subtracted in 200 components = 0.00276072 Jy ! Clean residual min=-0.004257 max=0.003609 Jy/beam ! Clean residual mean=-0.000028 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.205369 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.59755e-05 Jy ! Component: 100 - total flux cleaned = 4.808e-05 Jy ! Component: 150 - total flux cleaned = 6.79519e-05 Jy ! Component: 200 - total flux cleaned = 8.65201e-05 Jy ! Total flux subtracted in 200 components = 8.65201e-05 Jy ! Clean residual min=-0.004240 max=0.003651 Jy/beam ! Clean residual mean=-0.000027 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.205456 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 92 components and 0.205456 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.82 mas, bmaj=8.046 mas, bpa=-5.922 degrees ! Estimated noise=1254.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000279175 Jy ! Component: 100 - total flux cleaned = -0.000244765 Jy ! Component: 150 - total flux cleaned = -0.000215438 Jy ! Component: 200 - total flux cleaned = -0.000140332 Jy ! Total flux subtracted in 200 components = -0.000140332 Jy ! Clean residual min=-0.003058 max=0.002943 Jy/beam ! Clean residual mean=-0.000011 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.205315 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 109 components and 0.205315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095282Jy sigma=0.000662 ! Fit after self-cal, rms=0.095275Jy sigma=0.000661 wmodel J0617-2200_S_2017_08_05_pus_map.mod ! Writing 109 model components to file: J0617-2200_S_2017_08_05_pus_map.mod wobs J0617-2200_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0617-2200_S_2017_08_05_pus_uvs.fits wwins J0617-2200_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J0617-2200_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000405544 Jy ! Component: 100 - total flux cleaned = -0.000818004 Jy ! Component: 150 - total flux cleaned = -0.00135938 Jy ! Component: 200 - total flux cleaned = -0.00173518 Jy ! Component: 250 - total flux cleaned = -0.00209458 Jy ! Component: 300 - total flux cleaned = -0.00243957 Jy ! Component: 350 - total flux cleaned = -0.00273083 Jy ! Component: 400 - total flux cleaned = -0.00285291 Jy ! Component: 450 - total flux cleaned = -0.00308754 Jy ! Component: 500 - total flux cleaned = -0.00320158 Jy ! Component: 550 - total flux cleaned = -0.003238 Jy ! Component: 600 - total flux cleaned = -0.00327323 Jy ! Component: 650 - total flux cleaned = -0.00330791 Jy ! Component: 700 - total flux cleaned = -0.00327309 Jy ! Component: 750 - total flux cleaned = -0.00334093 Jy ! Component: 800 - total flux cleaned = -0.00337408 Jy ! Component: 850 - total flux cleaned = -0.00334216 Jy ! Component: 900 - total flux cleaned = -0.00334258 Jy ! Component: 950 - total flux cleaned = -0.00331123 Jy ! Component: 1000 - total flux cleaned = -0.00315794 Jy ! Component: 1050 - total flux cleaned = -0.00303709 Jy ! Component: 1100 - total flux cleaned = -0.00291868 Jy ! Component: 1150 - total flux cleaned = -0.00280231 Jy ! Component: 1200 - total flux cleaned = -0.00268844 Jy ! Component: 1250 - total flux cleaned = -0.0026608 Jy ! Component: 1300 - total flux cleaned = -0.00254996 Jy ! Component: 1350 - total flux cleaned = -0.00244139 Jy ! Component: 1400 - total flux cleaned = -0.0024678 Jy ! Component: 1450 - total flux cleaned = -0.00233537 Jy ! Component: 1500 - total flux cleaned = -0.00220517 Jy ! Component: 1550 - total flux cleaned = -0.00210246 Jy ! Component: 1600 - total flux cleaned = -0.00200166 Jy ! Component: 1650 - total flux cleaned = -0.00200173 Jy ! Component: 1700 - total flux cleaned = -0.00202603 Jy ! Component: 1750 - total flux cleaned = -0.00202626 Jy ! Component: 1800 - total flux cleaned = -0.00193087 Jy ! Component: 1850 - total flux cleaned = -0.00200212 Jy ! Component: 1900 - total flux cleaned = -0.00207247 Jy ! Component: 1950 - total flux cleaned = -0.00202667 Jy ! Component: 2000 - total flux cleaned = -0.00207278 Jy ! Component: 2050 - total flux cleaned = -0.00207262 Jy ! Component: 2100 - total flux cleaned = -0.00211684 Jy ! Component: 2150 - total flux cleaned = -0.00216052 Jy ! Component: 2200 - total flux cleaned = -0.00211719 Jy ! Component: 2250 - total flux cleaned = -0.00216039 Jy ! Component: 2300 - total flux cleaned = -0.00216071 Jy ! Component: 2350 - total flux cleaned = -0.00224452 Jy ! Component: 2400 - total flux cleaned = -0.00228582 Jy ! Component: 2450 - total flux cleaned = -0.00226527 Jy ! Component: 2500 - total flux cleaned = -0.00238708 Jy ! Component: 2550 - total flux cleaned = -0.00234696 Jy ! Component: 2600 - total flux cleaned = -0.00238671 Jy ! Component: 2650 - total flux cleaned = -0.00240646 Jy ! Component: 2700 - total flux cleaned = -0.00238713 Jy ! Component: 2750 - total flux cleaned = -0.00246406 Jy ! Component: 2800 - total flux cleaned = -0.00246407 Jy ! Component: 2850 - total flux cleaned = -0.00242655 Jy ! Component: 2900 - total flux cleaned = -0.0024825 Jy ! Component: 2950 - total flux cleaned = -0.00255593 Jy ! Component: 3000 - total flux cleaned = -0.00246474 Jy ! Component: 3050 - total flux cleaned = -0.00257275 Jy ! Component: 3100 - total flux cleaned = -0.00251895 Jy ! Component: 3150 - total flux cleaned = -0.00250139 Jy ! Component: 3200 - total flux cleaned = -0.00248409 Jy ! Component: 3250 - total flux cleaned = -0.00253591 Jy ! Component: 3300 - total flux cleaned = -0.00243298 Jy ! Component: 3350 - total flux cleaned = -0.0024671 Jy ! Component: 3400 - total flux cleaned = -0.00255115 Jy ! Component: 3450 - total flux cleaned = -0.00253421 Jy ! Component: 3500 - total flux cleaned = -0.00258407 Jy ! Component: 3550 - total flux cleaned = -0.00261677 Jy ! Component: 3600 - total flux cleaned = -0.00263305 Jy ! Component: 3650 - total flux cleaned = -0.00268145 Jy ! Component: 3700 - total flux cleaned = -0.00274546 Jy ! Component: 3750 - total flux cleaned = -0.00280888 Jy ! Component: 3800 - total flux cleaned = -0.00282442 Jy ! Component: 3850 - total flux cleaned = -0.00290233 Jy ! Component: 3900 - total flux cleaned = -0.00291773 Jy ! Component: 3950 - total flux cleaned = -0.00297901 Jy ! Component: 4000 - total flux cleaned = -0.00299426 Jy ! Component: 4050 - total flux cleaned = -0.00307012 Jy ! Total flux subtracted in 4096 components = -0.0030851 Jy ! Clean residual min=-0.000941 max=0.000994 Jy/beam ! Clean residual mean=-0.000003 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.20223 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 393 components and 0.20223 Jy ![Exited script file: muppet] wmap "J0617-2200_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.82 x 8.046 at -5.922 degrees (North through East) ! Clean map min=-0.0026001 max=0.17712 Jy/beam ! Writing clean map to FITS file: J0617-2200_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.17712 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000275056 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.465881 0.465881 0.931761 1.86352 3.72705 7.45409 14.9082 29.8164 59.6327 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.177 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.82 x 8.046 at -5.922 degrees (North through East) ! Clean map min=-0.0026001 max=0.17712 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0617-2200_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:22:33 2019