! Started logfile: J0616-1041_S_2017_05_01_pus_uvs.log on Wed May 1 18:29:07 2019 obs J0616-1041_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0616-1041_S_2017_05_01_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.971228 visibilities/baseline/integration-bin. ! Found source: J0616-1041 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 16608 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0616-1041_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 412 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.912782Jy sigma=0.012502 ! Fit after self-cal, rms=0.898382Jy sigma=0.012446 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=7.005 mas, bpa=-2.619 degrees ! Estimated noise=1301.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0722468 Jy ! Component: 100 - total flux cleaned = 0.0909886 Jy ! Total flux subtracted in 100 components = 0.0909886 Jy ! Clean residual min=-0.008121 max=0.011142 Jy/beam ! Clean residual mean=0.000006 rms=0.002459 Jy/beam ! Combined flux in latest and established models = 0.0909886 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0909886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117434Jy sigma=0.001151 ! Fit after self-cal, rms=0.117472Jy sigma=0.001150 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=8.237 mas, bpa=-1.317 degrees ! Estimated noise=820.468 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124177 Jy ! Component: 100 - total flux cleaned = 0.0177966 Jy ! Component: 150 - total flux cleaned = 0.0202149 Jy ! Component: 200 - total flux cleaned = 0.0207099 Jy ! Total flux subtracted in 200 components = 0.0207099 Jy ! Clean residual min=-0.006858 max=0.009791 Jy/beam ! Clean residual mean=0.000021 rms=0.002248 Jy/beam ! Combined flux in latest and established models = 0.111699 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 0.111699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114977Jy sigma=0.001282 ! Fit after self-cal, rms=0.114995Jy sigma=0.001282 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.84 HN 0.98 KP 0.96 ! LA 14.02 MK 0.94 NL 0.96 OV 1.00 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.86 HN 0.99 KP 0.91 ! LA 0.87 MK 0.88 NL 0.96 OV 0.99 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.91 HN 0.98 KP 0.97 ! LA 0.94 MK 1.60 NL 0.95 OV 0.91 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.87 HN 0.92 KP 1.00* ! LA 0.78 MK 0.95 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.114995Jy sigma=0.001282 ! Fit after self-cal, rms=0.450386Jy sigma=0.000698 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=8.202 mas, bpa=-1.183 degrees ! Estimated noise=870.303 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00565716 Jy ! Component: 100 - total flux cleaned = 0.00831894 Jy ! Component: 150 - total flux cleaned = 0.00986826 Jy ! Component: 200 - total flux cleaned = 0.0106575 Jy ! Total flux subtracted in 200 components = 0.0106575 Jy ! Clean residual min=-0.005298 max=0.003601 Jy/beam ! Clean residual mean=-0.000005 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.122356 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 47 components and 0.122356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.449046Jy sigma=0.000700 ! Fit after self-cal, rms=0.450078Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.450078Jy sigma=0.000692 ! Fit after self-cal, rms=0.612561Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.284 mas, bmaj=8.061 mas, bpa=-1.267 degrees ! Estimated noise=906.977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514113 Jy ! Component: 100 - total flux cleaned = 0.0076093 Jy ! Component: 150 - total flux cleaned = 0.00899288 Jy ! Component: 200 - total flux cleaned = 0.00982663 Jy ! Total flux subtracted in 200 components = 0.00982663 Jy ! Clean residual min=-0.005033 max=0.003302 Jy/beam ! Clean residual mean=-0.000007 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.132183 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 63 components and 0.132183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.611711Jy sigma=0.000684 ! Fit after self-cal, rms=0.611783Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413483 Jy ! Component: 100 - total flux cleaned = 0.000540824 Jy ! Component: 150 - total flux cleaned = 0.000609145 Jy ! Component: 200 - total flux cleaned = 0.000653951 Jy ! Total flux subtracted in 200 components = 0.000653951 Jy ! Clean residual min=-0.005019 max=0.003255 Jy/beam ! Clean residual mean=-0.000007 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.132837 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.132837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.611731Jy sigma=0.000684 ! Fit after self-cal, rms=0.611736Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.611736Jy sigma=0.000684 ! Fit after self-cal, rms=0.683811Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=8.003 mas, bpa=-1.277 degrees ! Estimated noise=927.609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244053 Jy ! Component: 100 - total flux cleaned = 0.00357826 Jy ! Component: 150 - total flux cleaned = 0.00403904 Jy ! Component: 200 - total flux cleaned = 0.0041269 Jy ! Total flux subtracted in 200 components = 0.0041269 Jy ! Clean residual min=-0.003034 max=0.002779 Jy/beam ! Clean residual mean=-0.000010 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.136964 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.136964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.683493Jy sigma=0.000672 ! Fit after self-cal, rms=0.683492Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.47656e-05 Jy ! Component: 100 - total flux cleaned = 0.000112877 Jy ! Component: 150 - total flux cleaned = 0.00013848 Jy ! Component: 200 - total flux cleaned = 0.000138545 Jy ! Total flux subtracted in 200 components = 0.000138545 Jy ! Clean residual min=-0.003115 max=0.002764 Jy/beam ! Clean residual mean=-0.000009 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.137102 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 0.137102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.683471Jy sigma=0.000671 ! Fit after self-cal, rms=0.683473Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.683473Jy sigma=0.000671 ! Fit after self-cal, rms=0.706080Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.404 mas, bmaj=13.69 mas, bpa=1.763 degrees ! Estimated noise=1192.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359286 Jy ! Component: 100 - total flux cleaned = 0.00483184 Jy ! Component: 150 - total flux cleaned = 0.00517898 Jy ! Component: 200 - total flux cleaned = 0.00521012 Jy ! Total flux subtracted in 200 components = 0.00521012 Jy ! Clean residual min=-0.004448 max=0.003582 Jy/beam ! Clean residual mean=-0.000019 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.142312 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.142312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.705710Jy sigma=0.000671 ! Fit after self-cal, rms=0.705696Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.16474e-06 Jy ! Component: 100 - total flux cleaned = 2.04926e-05 Jy ! Component: 150 - total flux cleaned = 3.24363e-05 Jy ! Component: 200 - total flux cleaned = 3.24177e-05 Jy ! Total flux subtracted in 200 components = 3.24177e-05 Jy ! Clean residual min=-0.004466 max=0.003537 Jy/beam ! Clean residual mean=-0.000019 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.142345 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 90 components and 0.142345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.705689Jy sigma=0.000671 ! Fit after self-cal, rms=0.705685Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=7.96 mas, bpa=-1.203 degrees ! Estimated noise=948.738 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.245 x 7.96 at -1.203 degrees (North through East) ! Clean map min=-0.0030724 max=0.11032 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=6.797 mas, bpa=-3.125 degrees ! Estimated noise=1482.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0826516 Jy ! Component: 100 - total flux cleaned = 0.107484 Jy ! Component: 150 - total flux cleaned = 0.120178 Jy ! Component: 200 - total flux cleaned = 0.127483 Jy ! Total flux subtracted in 200 components = 0.127483 Jy ! Clean residual min=-0.004263 max=0.005099 Jy/beam ! Clean residual mean=-0.000004 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.127483 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.127483 Jy ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=7.96 mas, bpa=-1.203 degrees ! Estimated noise=948.738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00600347 Jy ! Component: 100 - total flux cleaned = 0.00911442 Jy ! Component: 150 - total flux cleaned = 0.0108934 Jy ! Component: 200 - total flux cleaned = 0.0119542 Jy ! Total flux subtracted in 200 components = 0.0119542 Jy ! Clean residual min=-0.003334 max=0.002918 Jy/beam ! Clean residual mean=-0.000011 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.139437 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 45 components and 0.139437 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.404 mas, bmaj=13.69 mas, bpa=1.763 degrees ! Estimated noise=1192.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168001 Jy ! Component: 100 - total flux cleaned = 0.00215713 Jy ! Component: 150 - total flux cleaned = 0.00219467 Jy ! Component: 200 - total flux cleaned = 0.00221169 Jy ! Total flux subtracted in 200 components = 0.00221169 Jy ! Clean residual min=-0.004556 max=0.003563 Jy/beam ! Clean residual mean=-0.000020 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.141649 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.61756e-05 Jy ! Component: 100 - total flux cleaned = 3.16563e-05 Jy ! Component: 150 - total flux cleaned = 4.70043e-05 Jy ! Component: 200 - total flux cleaned = 6.15709e-05 Jy ! Total flux subtracted in 200 components = 6.15709e-05 Jy ! Clean residual min=-0.004546 max=0.003566 Jy/beam ! Clean residual mean=-0.000020 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.141711 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.141711 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=7.96 mas, bpa=-1.203 degrees ! Estimated noise=948.738 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000740269 Jy ! Component: 100 - total flux cleaned = -0.000771201 Jy ! Component: 150 - total flux cleaned = -0.000771601 Jy ! Component: 200 - total flux cleaned = -0.000791369 Jy ! Total flux subtracted in 200 components = -0.000791369 Jy ! Clean residual min=-0.003308 max=0.002800 Jy/beam ! Clean residual mean=-0.000010 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.140919 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.140919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.705743Jy sigma=0.000671 ! Fit after self-cal, rms=0.705739Jy sigma=0.000671 wmodel J0616-1041_S_2017_05_01_pus_map.mod ! Writing 66 model components to file: J0616-1041_S_2017_05_01_pus_map.mod wobs J0616-1041_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0616-1041_S_2017_05_01_pus_uvs.fits wwins J0616-1041_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J0616-1041_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013497 Jy ! Component: 100 - total flux cleaned = -0.00235721 Jy ! Component: 150 - total flux cleaned = -0.00330807 Jy ! Component: 200 - total flux cleaned = -0.00373866 Jy ! Component: 250 - total flux cleaned = -0.00419791 Jy ! Component: 300 - total flux cleaned = -0.00442095 Jy ! Component: 350 - total flux cleaned = -0.00472541 Jy ! Component: 400 - total flux cleaned = -0.00476785 Jy ! Component: 450 - total flux cleaned = -0.00497596 Jy ! Component: 500 - total flux cleaned = -0.00509864 Jy ! Component: 550 - total flux cleaned = -0.00533993 Jy ! Component: 600 - total flux cleaned = -0.00553779 Jy ! Component: 650 - total flux cleaned = -0.005655 Jy ! Component: 700 - total flux cleaned = -0.00580898 Jy ! Component: 750 - total flux cleaned = -0.00592214 Jy ! Component: 800 - total flux cleaned = -0.0061082 Jy ! Component: 850 - total flux cleaned = -0.00618086 Jy ! Component: 900 - total flux cleaned = -0.00621735 Jy ! Component: 950 - total flux cleaned = -0.00625348 Jy ! Component: 1000 - total flux cleaned = -0.0065358 Jy ! Component: 1050 - total flux cleaned = -0.00667501 Jy ! Component: 1100 - total flux cleaned = -0.00688159 Jy ! Component: 1150 - total flux cleaned = -0.00694944 Jy ! Component: 1200 - total flux cleaned = -0.00708411 Jy ! Component: 1250 - total flux cleaned = -0.00715081 Jy ! Component: 1300 - total flux cleaned = -0.00718407 Jy ! Component: 1350 - total flux cleaned = -0.00734716 Jy ! Component: 1400 - total flux cleaned = -0.00741178 Jy ! Component: 1450 - total flux cleaned = -0.00747543 Jy ! Component: 1500 - total flux cleaned = -0.00766474 Jy ! Component: 1550 - total flux cleaned = -0.00769569 Jy ! Component: 1600 - total flux cleaned = -0.00775745 Jy ! Component: 1650 - total flux cleaned = -0.00778819 Jy ! Component: 1700 - total flux cleaned = -0.00790999 Jy ! Component: 1750 - total flux cleaned = -0.00794033 Jy ! Component: 1800 - total flux cleaned = -0.00803012 Jy ! Component: 1850 - total flux cleaned = -0.00803016 Jy ! Component: 1900 - total flux cleaned = -0.00803015 Jy ! Component: 1950 - total flux cleaned = -0.0081466 Jy ! Component: 2000 - total flux cleaned = -0.00817541 Jy ! Component: 2050 - total flux cleaned = -0.00826135 Jy ! Component: 2100 - total flux cleaned = -0.00831827 Jy ! Component: 2150 - total flux cleaned = -0.00831852 Jy ! Component: 2200 - total flux cleaned = -0.00851414 Jy ! Component: 2250 - total flux cleaned = -0.00859719 Jy ! Component: 2300 - total flux cleaned = -0.00862483 Jy ! Component: 2350 - total flux cleaned = -0.00884355 Jy ! Component: 2400 - total flux cleaned = -0.00889768 Jy ! Component: 2450 - total flux cleaned = -0.00895161 Jy ! Component: 2500 - total flux cleaned = -0.00897848 Jy ! Component: 2550 - total flux cleaned = -0.00913771 Jy ! Component: 2600 - total flux cleaned = -0.009322 Jy ! Component: 2650 - total flux cleaned = -0.00932206 Jy ! Component: 2700 - total flux cleaned = -0.00937381 Jy ! Component: 2750 - total flux cleaned = -0.00942561 Jy ! Component: 2800 - total flux cleaned = -0.00942574 Jy ! Component: 2850 - total flux cleaned = -0.00945147 Jy ! Component: 2900 - total flux cleaned = -0.00947694 Jy ! Component: 2950 - total flux cleaned = -0.0095273 Jy ! Component: 3000 - total flux cleaned = -0.00960198 Jy ! Component: 3050 - total flux cleaned = -0.00955206 Jy ! Component: 3100 - total flux cleaned = -0.00955198 Jy ! Component: 3150 - total flux cleaned = -0.00962576 Jy ! Component: 3200 - total flux cleaned = -0.00957693 Jy ! Component: 3250 - total flux cleaned = -0.0096742 Jy ! Component: 3300 - total flux cleaned = -0.00969812 Jy ! Component: 3350 - total flux cleaned = -0.00964991 Jy ! Component: 3400 - total flux cleaned = -0.00969787 Jy ! Component: 3450 - total flux cleaned = -0.00979304 Jy ! Component: 3500 - total flux cleaned = -0.00974566 Jy ! Component: 3550 - total flux cleaned = -0.00981616 Jy ! Component: 3600 - total flux cleaned = -0.00988622 Jy ! Component: 3650 - total flux cleaned = -0.00988599 Jy ! Component: 3700 - total flux cleaned = -0.00990918 Jy ! Component: 3750 - total flux cleaned = -0.00988618 Jy ! Component: 3800 - total flux cleaned = -0.00995492 Jy ! Component: 3850 - total flux cleaned = -0.0100005 Jy ! Component: 3900 - total flux cleaned = -0.0100229 Jy ! Component: 3950 - total flux cleaned = -0.0100229 Jy ! Component: 4000 - total flux cleaned = -0.0100229 Jy ! Component: 4050 - total flux cleaned = -0.0100454 Jy ! Total flux subtracted in 4096 components = -0.00991199 Jy ! Clean residual min=-0.001364 max=0.001422 Jy/beam ! Clean residual mean=-0.000009 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.131007 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 349 components and 0.131007 Jy ![Exited script file: muppet] wmap "J0616-1041_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.245 x 7.96 at -1.203 degrees (North through East) ! Clean map min=-0.0023574 max=0.11154 Jy/beam ! Writing clean map to FITS file: J0616-1041_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111536 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000414938 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.11606 1.11606 2.23213 4.46426 8.92852 17.857 35.7141 71.4281 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.245 x 7.96 at -1.203 degrees (North through East) ! Clean map min=-0.0023574 max=0.11154 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0616-1041_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:29:11 2019