! Started logfile: J0616-0306_S_2017_06_15_pus_uvs.log on Tue May 7 15:12:27 2019 obs J0616-0306_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0616-0306_S_2017_06_15_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.916931 visibilities/baseline/integration-bin. ! Found source: J0616-0306 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 13864 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0616-0306_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 442 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.903963Jy sigma=0.007479 ! Fit after self-cal, rms=0.887661Jy sigma=0.007360 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.695 mas, bmaj=7.032 mas, bpa=-3.483 degrees ! Estimated noise=1110.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0886428 Jy ! Component: 100 - total flux cleaned = 0.10883 Jy ! Total flux subtracted in 100 components = 0.10883 Jy ! Clean residual min=-0.005129 max=0.007566 Jy/beam ! Clean residual mean=0.000004 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.10883 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.10883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087821Jy sigma=0.000694 ! Fit after self-cal, rms=0.087777Jy sigma=0.000693 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=8.024 mas, bpa=-3.354 degrees ! Estimated noise=823.549 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00974731 Jy ! Component: 100 - total flux cleaned = 0.014021 Jy ! Component: 150 - total flux cleaned = 0.0165292 Jy ! Component: 200 - total flux cleaned = 0.0180415 Jy ! Total flux subtracted in 200 components = 0.0180415 Jy ! Clean residual min=-0.004670 max=0.007169 Jy/beam ! Clean residual mean=-0.000008 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.126871 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 41 components and 0.126871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086863Jy sigma=0.000684 ! Fit after self-cal, rms=0.086881Jy sigma=0.000684 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.91 HN 0.98 KP 1.02 ! LA 1.04 MK 1.02 NL 0.89 OV 1.01 ! PT 0.99 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 0.95 HN 1.02 KP 0.99 ! LA 1.00 MK 1.04 NL 1.03 OV 1.04 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.00 KP 0.96 ! LA 1.02 MK 1.03 NL 0.99 OV 0.94 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.06 KP 1.00* ! LA 1.15 MK 1.02 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.086881Jy sigma=0.000684 ! Fit after self-cal, rms=0.088597Jy sigma=0.000679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.109 mas, bpa=-3.174 degrees ! Estimated noise=822.534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (41.5, 58.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00727641 Jy ! Component: 100 - total flux cleaned = 0.0112032 Jy ! Component: 150 - total flux cleaned = 0.0135499 Jy ! Component: 200 - total flux cleaned = 0.0141411 Jy ! Total flux subtracted in 200 components = 0.0141411 Jy ! Clean residual min=-0.003783 max=0.006495 Jy/beam ! Clean residual mean=-0.000010 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.141012 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 82 components and 0.141012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088038Jy sigma=0.000674 ! Fit after self-cal, rms=0.088079Jy sigma=0.000673 ! Inverting map ! Added new window around map position (20, 25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620071 Jy ! Component: 100 - total flux cleaned = 0.00982271 Jy ! Component: 150 - total flux cleaned = 0.0125132 Jy ! Component: 200 - total flux cleaned = 0.0146797 Jy ! Total flux subtracted in 200 components = 0.0146797 Jy ! Clean residual min=-0.002843 max=0.002951 Jy/beam ! Clean residual mean=-0.000003 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.155692 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 126 components and 0.155692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087608Jy sigma=0.000668 ! Fit after self-cal, rms=0.087577Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087577Jy sigma=0.000668 ! Fit after self-cal, rms=0.089510Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=8.148 mas, bpa=-3.23 degrees ! Estimated noise=820.872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266929 Jy ! Component: 100 - total flux cleaned = 0.00460663 Jy ! Component: 150 - total flux cleaned = 0.00616182 Jy ! Component: 200 - total flux cleaned = 0.00742648 Jy ! Total flux subtracted in 200 components = 0.00742648 Jy ! Clean residual min=-0.002433 max=0.002405 Jy/beam ! Clean residual mean=-0.000002 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.163118 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 162 components and 0.163118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089400Jy sigma=0.000660 ! Fit after self-cal, rms=0.089462Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-44.5, 125). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215742 Jy ! Component: 100 - total flux cleaned = 0.00310003 Jy ! Component: 150 - total flux cleaned = 0.00383816 Jy ! Component: 200 - total flux cleaned = 0.0043215 Jy ! Total flux subtracted in 200 components = 0.0043215 Jy ! Clean residual min=-0.002190 max=0.001917 Jy/beam ! Clean residual mean=-0.000001 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.16744 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 190 components and 0.16744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089390Jy sigma=0.000659 ! Fit after self-cal, rms=0.089384Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089384Jy sigma=0.000659 ! Fit after self-cal, rms=0.089892Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=8.156 mas, bpa=-3.321 degrees ! Estimated noise=820.864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141675 Jy ! Component: 100 - total flux cleaned = 0.00222985 Jy ! Component: 150 - total flux cleaned = 0.00259933 Jy ! Component: 200 - total flux cleaned = 0.00283518 Jy ! Total flux subtracted in 200 components = 0.00283518 Jy ! Clean residual min=-0.002087 max=0.001834 Jy/beam ! Clean residual mean=-0.000002 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.170275 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 215 components and 0.170275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089852Jy sigma=0.000659 ! Fit after self-cal, rms=0.089848Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585949 Jy ! Component: 100 - total flux cleaned = 0.000710348 Jy ! Component: 150 - total flux cleaned = 0.000797492 Jy ! Component: 200 - total flux cleaned = 0.00088094 Jy ! Total flux subtracted in 200 components = 0.00088094 Jy ! Clean residual min=-0.002040 max=0.001767 Jy/beam ! Clean residual mean=-0.000002 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.171156 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 230 components and 0.171156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089827Jy sigma=0.000658 ! Fit after self-cal, rms=0.089827Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089827Jy sigma=0.000658 ! Fit after self-cal, rms=0.090027Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.616 mas, bmaj=13.64 mas, bpa=-1.826 degrees ! Estimated noise=1011.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156713 Jy ! Component: 100 - total flux cleaned = 0.00211263 Jy ! Component: 150 - total flux cleaned = 0.00221053 Jy ! Component: 200 - total flux cleaned = 0.00215469 Jy ! Total flux subtracted in 200 components = 0.00215469 Jy ! Clean residual min=-0.001827 max=0.001858 Jy/beam ! Clean residual mean=-0.000004 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.173311 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 244 components and 0.173311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090015Jy sigma=0.000658 ! Fit after self-cal, rms=0.090008Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448563 Jy ! Component: 100 - total flux cleaned = 0.0004734 Jy ! Component: 150 - total flux cleaned = 0.000449941 Jy ! Component: 200 - total flux cleaned = 0.000428779 Jy ! Total flux subtracted in 200 components = 0.000428779 Jy ! Clean residual min=-0.001784 max=0.001848 Jy/beam ! Clean residual mean=-0.000003 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.17374 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 253 components and 0.17374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090005Jy sigma=0.000658 ! Fit after self-cal, rms=0.090003Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=8.164 mas, bpa=-3.373 degrees ! Estimated noise=821.476 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.264 x 8.164 at -3.373 degrees (North through East) ! Clean map min=-0.0018956 max=0.11425 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.698 mas, bmaj=7.145 mas, bpa=-3.482 degrees ! Estimated noise=1132.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0901228 Jy ! Component: 100 - total flux cleaned = 0.110668 Jy ! Component: 150 - total flux cleaned = 0.119665 Jy ! Component: 200 - total flux cleaned = 0.126159 Jy ! Total flux subtracted in 200 components = 0.126159 Jy ! Clean residual min=-0.003922 max=0.003993 Jy/beam ! Clean residual mean=0.000002 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.126159 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.126159 Jy ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=8.164 mas, bpa=-3.373 degrees ! Estimated noise=821.476 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00735194 Jy ! Component: 100 - total flux cleaned = 0.0129678 Jy ! Component: 150 - total flux cleaned = 0.0175926 Jy ! Component: 200 - total flux cleaned = 0.021451 Jy ! Total flux subtracted in 200 components = 0.021451 Jy ! Clean residual min=-0.002617 max=0.002503 Jy/beam ! Clean residual mean=-0.000001 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.14761 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 76 components and 0.14761 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.616 mas, bmaj=13.64 mas, bpa=-1.826 degrees ! Estimated noise=1011.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054514 Jy ! Component: 100 - total flux cleaned = 0.00948378 Jy ! Component: 150 - total flux cleaned = 0.0126501 Jy ! Component: 200 - total flux cleaned = 0.0151952 Jy ! Total flux subtracted in 200 components = 0.0151952 Jy ! Clean residual min=-0.002309 max=0.002563 Jy/beam ! Clean residual mean=-0.000000 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.162805 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207842 Jy ! Component: 100 - total flux cleaned = 0.00378929 Jy ! Component: 150 - total flux cleaned = 0.00520614 Jy ! Component: 200 - total flux cleaned = 0.00638446 Jy ! Total flux subtracted in 200 components = 0.00638446 Jy ! Clean residual min=-0.001960 max=0.001929 Jy/beam ! Clean residual mean=-0.000001 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.169189 Jy ! Adding 112 model components to the UV plane model. ! The established model now contains 179 components and 0.169189 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=8.164 mas, bpa=-3.373 degrees ! Estimated noise=821.476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991149 Jy ! Component: 100 - total flux cleaned = 0.00146325 Jy ! Component: 150 - total flux cleaned = 0.00192495 Jy ! Component: 200 - total flux cleaned = 0.00229773 Jy ! Total flux subtracted in 200 components = 0.00229773 Jy ! Clean residual min=-0.001979 max=0.001726 Jy/beam ! Clean residual mean=-0.000001 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.171487 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 201 components and 0.171487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090051Jy sigma=0.000659 ! Fit after self-cal, rms=0.090038Jy sigma=0.000659 wmodel J0616-0306_S_2017_06_15_pus_map.mod ! Writing 201 model components to file: J0616-0306_S_2017_06_15_pus_map.mod wobs J0616-0306_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0616-0306_S_2017_06_15_pus_uvs.fits wwins J0616-0306_S_2017_06_15_pus_map.win ! wwins: Wrote 4 windows to J0616-0306_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00089111 Jy ! Component: 100 - total flux cleaned = -0.00138365 Jy ! Component: 150 - total flux cleaned = -0.00163237 Jy ! Component: 200 - total flux cleaned = -0.00181138 Jy ! Component: 250 - total flux cleaned = -0.00181176 Jy ! Component: 300 - total flux cleaned = -0.00189585 Jy ! Component: 350 - total flux cleaned = -0.00195098 Jy ! Component: 400 - total flux cleaned = -0.00208537 Jy ! Component: 450 - total flux cleaned = -0.00211148 Jy ! Component: 500 - total flux cleaned = -0.00211166 Jy ! Component: 550 - total flux cleaned = -0.00218776 Jy ! Component: 600 - total flux cleaned = -0.00211278 Jy ! Component: 650 - total flux cleaned = -0.0021618 Jy ! Component: 700 - total flux cleaned = -0.00218632 Jy ! Component: 750 - total flux cleaned = -0.0022577 Jy ! Component: 800 - total flux cleaned = -0.00235143 Jy ! Component: 850 - total flux cleaned = -0.00244409 Jy ! Component: 900 - total flux cleaned = -0.00253541 Jy ! Component: 950 - total flux cleaned = -0.00251272 Jy ! Component: 1000 - total flux cleaned = -0.00262402 Jy ! Component: 1050 - total flux cleaned = -0.00266804 Jy ! Component: 1100 - total flux cleaned = -0.00271179 Jy ! Component: 1150 - total flux cleaned = -0.00269042 Jy ! Component: 1200 - total flux cleaned = -0.00271184 Jy ! Component: 1250 - total flux cleaned = -0.00283877 Jy ! Component: 1300 - total flux cleaned = -0.00283873 Jy ! Component: 1350 - total flux cleaned = -0.00281802 Jy ! Component: 1400 - total flux cleaned = -0.00296165 Jy ! Component: 1450 - total flux cleaned = -0.00298203 Jy ! Component: 1500 - total flux cleaned = -0.00304255 Jy ! Component: 1550 - total flux cleaned = -0.0032214 Jy ! Component: 1600 - total flux cleaned = -0.00322128 Jy ! Component: 1650 - total flux cleaned = -0.00331878 Jy ! Component: 1700 - total flux cleaned = -0.00335746 Jy ! Component: 1750 - total flux cleaned = -0.00349153 Jy ! Component: 1800 - total flux cleaned = -0.00360549 Jy ! Component: 1850 - total flux cleaned = -0.00375601 Jy ! Component: 1900 - total flux cleaned = -0.0038491 Jy ! Component: 1950 - total flux cleaned = -0.00396009 Jy ! Component: 2000 - total flux cleaned = -0.00399681 Jy ! Component: 2050 - total flux cleaned = -0.00414232 Jy ! Component: 2100 - total flux cleaned = -0.00425047 Jy ! Component: 2150 - total flux cleaned = -0.00430423 Jy ! Component: 2200 - total flux cleaned = -0.00446428 Jy ! Component: 2250 - total flux cleaned = -0.00448167 Jy ! Component: 2300 - total flux cleaned = -0.00460431 Jy ! Component: 2350 - total flux cleaned = -0.0047433 Jy ! Component: 2400 - total flux cleaned = -0.00481229 Jy ! Component: 2450 - total flux cleaned = -0.00489782 Jy ! Component: 2500 - total flux cleaned = -0.00491488 Jy ! Component: 2550 - total flux cleaned = -0.005033 Jy ! Component: 2600 - total flux cleaned = -0.00499938 Jy ! Component: 2650 - total flux cleaned = -0.00509933 Jy ! Component: 2700 - total flux cleaned = -0.0051489 Jy ! Component: 2750 - total flux cleaned = -0.00514898 Jy ! Component: 2800 - total flux cleaned = -0.00516541 Jy ! Component: 2850 - total flux cleaned = -0.00524651 Jy ! Component: 2900 - total flux cleaned = -0.00524647 Jy ! Component: 2950 - total flux cleaned = -0.00519827 Jy ! Component: 3000 - total flux cleaned = -0.00527789 Jy ! Component: 3050 - total flux cleaned = -0.0053567 Jy ! Component: 3100 - total flux cleaned = -0.00530957 Jy ! Component: 3150 - total flux cleaned = -0.00530962 Jy ! Component: 3200 - total flux cleaned = -0.00534056 Jy ! Component: 3250 - total flux cleaned = -0.00537127 Jy ! Component: 3300 - total flux cleaned = -0.00541725 Jy ! Component: 3350 - total flux cleaned = -0.00535656 Jy ! Component: 3400 - total flux cleaned = -0.00538682 Jy ! Component: 3450 - total flux cleaned = -0.005432 Jy ! Component: 3500 - total flux cleaned = -0.00543206 Jy ! Component: 3550 - total flux cleaned = -0.00552123 Jy ! Component: 3600 - total flux cleaned = -0.0054474 Jy ! Component: 3650 - total flux cleaned = -0.00552075 Jy ! Component: 3700 - total flux cleaned = -0.00552073 Jy ! Component: 3750 - total flux cleaned = -0.00549159 Jy ! Component: 3800 - total flux cleaned = -0.00553494 Jy ! Component: 3850 - total flux cleaned = -0.00552063 Jy ! Component: 3900 - total flux cleaned = -0.00550643 Jy ! Component: 3950 - total flux cleaned = -0.00550652 Jy ! Component: 4000 - total flux cleaned = -0.00554883 Jy ! Component: 4050 - total flux cleaned = -0.00549268 Jy ! Total flux subtracted in 4096 components = -0.00552053 Jy ! Clean residual min=-0.000752 max=0.001035 Jy/beam ! Clean residual mean=0.000001 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.165967 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 492 components and 0.165967 Jy ![Exited script file: muppet] wmap "J0616-0306_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.264 x 8.164 at -3.373 degrees (North through East) ! Clean map min=-0.0017703 max=0.11527 Jy/beam ! Writing clean map to FITS file: J0616-0306_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.115273 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000261815 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.681377 0.681377 1.36275 2.72551 5.45101 10.902 21.8041 43.6081 87.2162 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.115 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.264 x 8.164 at -3.373 degrees (North through East) ! Clean map min=-0.0017703 max=0.11527 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0616-0306_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:12:33 2019