! Started logfile: J0615-3117_S_2017_10_09_pus_uvs.log on Sun May 12 13:06:10 2019 obs J0615-3117_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0615-3117_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.660388 visibilities/baseline/integration-bin. ! Found source: J0615-3117 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 13884 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0615-3117_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 241 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 342 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 342 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 802 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.953364Jy sigma=0.006568 ! Fit after self-cal, rms=0.916940Jy sigma=0.006340 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.421 mas, bmaj=12.12 mas, bpa=-21.35 degrees ! Estimated noise=1886.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0611294 Jy ! Component: 100 - total flux cleaned = 0.0781629 Jy ! Total flux subtracted in 100 components = 0.0781629 Jy ! Clean residual min=-0.006970 max=0.007565 Jy/beam ! Clean residual mean=0.000011 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.078163 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.078163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106306Jy sigma=0.000668 ! Fit after self-cal, rms=0.106129Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=15.11 mas, bpa=-21.7 degrees ! Estimated noise=1059.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162378 Jy ! Component: 100 - total flux cleaned = 0.0248697 Jy ! Component: 150 - total flux cleaned = 0.0301281 Jy ! Component: 200 - total flux cleaned = 0.0333641 Jy ! Total flux subtracted in 200 components = 0.0333641 Jy ! Clean residual min=-0.004604 max=0.005797 Jy/beam ! Clean residual mean=-0.000038 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.111527 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 59 components and 0.111527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103673Jy sigma=0.000649 ! Fit after self-cal, rms=0.103540Jy sigma=0.000647 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.90 HN 1.12 KP 1.09 ! LA 0.95 MK 1.06 NL 0.95 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 0.98 HN 1.10 KP 1.08 ! LA 0.91 MK 1.02 NL 1.14 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.04 HN 1.13 KP 0.93 ! LA 0.75 MK 1.07 NL 1.22 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.82 KP 1.00* ! LA 1.00* MK 1.06 NL 1.00* OV 1.00* ! PT 0.95 ! ! ! Fit before self-cal, rms=0.103540Jy sigma=0.000647 ! Fit after self-cal, rms=0.106226Jy sigma=0.000644 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=15.46 mas, bpa=-21.62 degrees ! Estimated noise=1077.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00041377 Jy ! Component: 100 - total flux cleaned = -0.00040941 Jy ! Component: 150 - total flux cleaned = -0.000409765 Jy ! Component: 200 - total flux cleaned = -0.000409919 Jy ! Total flux subtracted in 200 components = -0.000409919 Jy ! Clean residual min=-0.003242 max=0.003999 Jy/beam ! Clean residual mean=0.000016 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.111117 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 0.111117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106193Jy sigma=0.000644 ! Fit after self-cal, rms=0.106385Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106385Jy sigma=0.000643 ! Fit after self-cal, rms=0.106440Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=15.63 mas, bpa=-21.82 degrees ! Estimated noise=1082.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00048991 Jy ! Component: 100 - total flux cleaned = -0.000473615 Jy ! Component: 150 - total flux cleaned = -0.000473569 Jy ! Component: 200 - total flux cleaned = -0.000473923 Jy ! Total flux subtracted in 200 components = -0.000473923 Jy ! Clean residual min=-0.003039 max=0.003790 Jy/beam ! Clean residual mean=0.000018 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.110643 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 0.110643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106432Jy sigma=0.000641 ! Fit after self-cal, rms=0.106480Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (29, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235941 Jy ! Component: 100 - total flux cleaned = 0.00243017 Jy ! Component: 150 - total flux cleaned = 0.00254788 Jy ! Component: 200 - total flux cleaned = 0.00255104 Jy ! Total flux subtracted in 200 components = 0.00255104 Jy ! Clean residual min=-0.002692 max=0.002623 Jy/beam ! Clean residual mean=0.000020 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.113194 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 107 components and 0.113194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106338Jy sigma=0.000640 ! Fit after self-cal, rms=0.106292Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106292Jy sigma=0.000640 ! Fit after self-cal, rms=0.106132Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=15.65 mas, bpa=-21.73 degrees ! Estimated noise=1076.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010089 Jy ! Component: 100 - total flux cleaned = 0.00106633 Jy ! Component: 150 - total flux cleaned = 0.00107023 Jy ! Component: 200 - total flux cleaned = 0.00107025 Jy ! Total flux subtracted in 200 components = 0.00107025 Jy ! Clean residual min=-0.002610 max=0.002591 Jy/beam ! Clean residual mean=0.000019 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.114265 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 118 components and 0.114265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106067Jy sigma=0.000640 ! Fit after self-cal, rms=0.106061Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303901 Jy ! Component: 100 - total flux cleaned = 0.000222243 Jy ! Component: 150 - total flux cleaned = 0.000149837 Jy ! Component: 200 - total flux cleaned = 8.12253e-05 Jy ! Total flux subtracted in 200 components = 8.12253e-05 Jy ! Clean residual min=-0.002638 max=0.002580 Jy/beam ! Clean residual mean=0.000020 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.114346 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 133 components and 0.114346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106025Jy sigma=0.000640 ! Fit after self-cal, rms=0.106016Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106016Jy sigma=0.000640 ! Fit after self-cal, rms=0.105746Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.539 mas, bmaj=30.53 mas, bpa=-10.17 degrees ! Estimated noise=1285.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000766959 Jy ! Component: 100 - total flux cleaned = 0.000829267 Jy ! Component: 150 - total flux cleaned = 0.000802309 Jy ! Component: 200 - total flux cleaned = 0.00075083 Jy ! Total flux subtracted in 200 components = 0.00075083 Jy ! Clean residual min=-0.002842 max=0.002866 Jy/beam ! Clean residual mean=0.000030 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.115097 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 159 components and 0.115097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105736Jy sigma=0.000639 ! Fit after self-cal, rms=0.105732Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104481 Jy ! Component: 100 - total flux cleaned = 5.18219e-05 Jy ! Component: 150 - total flux cleaned = 1.04616e-06 Jy ! Component: 200 - total flux cleaned = -6.89974e-05 Jy ! Total flux subtracted in 200 components = -6.89974e-05 Jy ! Clean residual min=-0.002828 max=0.002836 Jy/beam ! Clean residual mean=0.000030 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.115028 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 163 components and 0.115028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105725Jy sigma=0.000639 ! Fit after self-cal, rms=0.105720Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=15.65 mas, bpa=-21.65 degrees ! Estimated noise=1074.07 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.147 x 15.65 at -21.65 degrees (North through East) ! Clean map min=-0.0029825 max=0.083247 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=12.6 mas, bpa=-21.32 degrees ! Estimated noise=2012.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0627901 Jy ! Component: 100 - total flux cleaned = 0.0817352 Jy ! Component: 150 - total flux cleaned = 0.0875787 Jy ! Component: 200 - total flux cleaned = 0.0928576 Jy ! Total flux subtracted in 200 components = 0.0928576 Jy ! Clean residual min=-0.005318 max=0.005458 Jy/beam ! Clean residual mean=0.000020 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 0.0928576 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0928576 Jy ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=15.65 mas, bpa=-21.65 degrees ! Estimated noise=1074.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00751083 Jy ! Component: 100 - total flux cleaned = 0.0123323 Jy ! Component: 150 - total flux cleaned = 0.0150161 Jy ! Component: 200 - total flux cleaned = 0.0163238 Jy ! Total flux subtracted in 200 components = 0.0163238 Jy ! Clean residual min=-0.003078 max=0.002912 Jy/beam ! Clean residual mean=0.000001 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.109181 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 60 components and 0.109181 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.539 mas, bmaj=30.53 mas, bpa=-10.17 degrees ! Estimated noise=1285.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251182 Jy ! Component: 100 - total flux cleaned = 0.00331769 Jy ! Component: 150 - total flux cleaned = 0.00377352 Jy ! Component: 200 - total flux cleaned = 0.0039099 Jy ! Total flux subtracted in 200 components = 0.0039099 Jy ! Clean residual min=-0.003058 max=0.002787 Jy/beam ! Clean residual mean=0.000020 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.113091 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.25318e-06 Jy ! Component: 100 - total flux cleaned = 4.65628e-06 Jy ! Component: 150 - total flux cleaned = 6.28234e-06 Jy ! Component: 200 - total flux cleaned = 3.72996e-05 Jy ! Total flux subtracted in 200 components = 3.72996e-05 Jy ! Clean residual min=-0.002936 max=0.002752 Jy/beam ! Clean residual mean=0.000020 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.113129 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 90 components and 0.113129 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=15.65 mas, bpa=-21.65 degrees ! Estimated noise=1074.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.28453e-05 Jy ! Component: 100 - total flux cleaned = -0.000131213 Jy ! Component: 150 - total flux cleaned = -0.000218347 Jy ! Component: 200 - total flux cleaned = -0.000217944 Jy ! Total flux subtracted in 200 components = -0.000217944 Jy ! Clean residual min=-0.002600 max=0.002353 Jy/beam ! Clean residual mean=0.000010 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.112911 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 107 components and 0.112911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105737Jy sigma=0.000640 ! Fit after self-cal, rms=0.105708Jy sigma=0.000639 wmodel J0615-3117_S_2017_10_09_pus_map.mod ! Writing 107 model components to file: J0615-3117_S_2017_10_09_pus_map.mod wobs J0615-3117_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0615-3117_S_2017_10_09_pus_uvs.fits wwins J0615-3117_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0615-3117_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000715444 Jy ! Component: 100 - total flux cleaned = -0.00108822 Jy ! Component: 150 - total flux cleaned = -0.00136234 Jy ! Component: 200 - total flux cleaned = -0.00154637 Jy ! Component: 250 - total flux cleaned = -0.00172141 Jy ! Component: 300 - total flux cleaned = -0.00195748 Jy ! Component: 350 - total flux cleaned = -0.00224682 Jy ! Component: 400 - total flux cleaned = -0.0023706 Jy ! Component: 450 - total flux cleaned = -0.00254911 Jy ! Component: 500 - total flux cleaned = -0.00269301 Jy ! Component: 550 - total flux cleaned = -0.00283248 Jy ! Component: 600 - total flux cleaned = -0.00294069 Jy ! Component: 650 - total flux cleaned = -0.00299325 Jy ! Component: 700 - total flux cleaned = -0.00304508 Jy ! Component: 750 - total flux cleaned = -0.00317079 Jy ! Component: 800 - total flux cleaned = -0.00326885 Jy ! Component: 850 - total flux cleaned = -0.00334069 Jy ! Component: 900 - total flux cleaned = -0.00345757 Jy ! Component: 950 - total flux cleaned = -0.0035947 Jy ! Component: 1000 - total flux cleaned = -0.00372947 Jy ! Component: 1050 - total flux cleaned = -0.00388347 Jy ! Component: 1100 - total flux cleaned = -0.00396996 Jy ! Component: 1150 - total flux cleaned = -0.00409682 Jy ! Component: 1200 - total flux cleaned = -0.00417984 Jy ! Component: 1250 - total flux cleaned = -0.00428189 Jy ! Component: 1300 - total flux cleaned = -0.00444222 Jy ! Component: 1350 - total flux cleaned = -0.00458087 Jy ! Component: 1400 - total flux cleaned = -0.0047171 Jy ! Component: 1450 - total flux cleaned = -0.00488908 Jy ! Component: 1500 - total flux cleaned = -0.00498282 Jy ! Component: 1550 - total flux cleaned = -0.00503829 Jy ! Component: 1600 - total flux cleaned = -0.00518427 Jy ! Component: 1650 - total flux cleaned = -0.00523832 Jy ! Component: 1700 - total flux cleaned = -0.0053448 Jy ! Component: 1750 - total flux cleaned = -0.00546742 Jy ! Component: 1800 - total flux cleaned = -0.00553679 Jy ! Component: 1850 - total flux cleaned = -0.00562209 Jy ! Component: 1900 - total flux cleaned = -0.0056897 Jy ! Component: 1950 - total flux cleaned = -0.00582285 Jy ! Component: 2000 - total flux cleaned = -0.00590514 Jy ! Component: 2050 - total flux cleaned = -0.00606787 Jy ! Component: 2100 - total flux cleaned = -0.00614811 Jy ! Component: 2150 - total flux cleaned = -0.00624327 Jy ! Component: 2200 - total flux cleaned = -0.00638453 Jy ! Component: 2250 - total flux cleaned = -0.00646186 Jy ! Component: 2300 - total flux cleaned = -0.00656928 Jy ! Component: 2350 - total flux cleaned = -0.00667554 Jy ! Component: 2400 - total flux cleaned = -0.00681051 Jy ! Component: 2450 - total flux cleaned = -0.00688496 Jy ! Component: 2500 - total flux cleaned = -0.00703209 Jy ! Component: 2550 - total flux cleaned = -0.00716326 Jy ! Component: 2600 - total flux cleaned = -0.00726428 Jy ! Component: 2650 - total flux cleaned = -0.00739294 Jy ! Component: 2700 - total flux cleaned = -0.00752037 Jy ! Component: 2750 - total flux cleaned = -0.00764652 Jy ! Component: 2800 - total flux cleaned = -0.00774372 Jy ! Component: 2850 - total flux cleaned = -0.00786766 Jy ! Component: 2900 - total flux cleaned = -0.00801793 Jy ! Component: 2950 - total flux cleaned = -0.00812618 Jy ! Component: 3000 - total flux cleaned = -0.00820685 Jy ! Component: 3050 - total flux cleaned = -0.00835331 Jy ! Component: 3100 - total flux cleaned = -0.0084457 Jy ! Component: 3150 - total flux cleaned = -0.00852438 Jy ! Component: 3200 - total flux cleaned = -0.00864139 Jy ! Component: 3250 - total flux cleaned = -0.00874451 Jy ! Component: 3300 - total flux cleaned = -0.00882125 Jy ! Component: 3350 - total flux cleaned = -0.00889726 Jy ! Component: 3400 - total flux cleaned = -0.0089729 Jy ! Component: 3450 - total flux cleaned = -0.00897303 Jy ! Component: 3500 - total flux cleaned = -0.00905994 Jy ! Component: 3550 - total flux cleaned = -0.00915852 Jy ! Component: 3600 - total flux cleaned = -0.0092196 Jy ! Component: 3650 - total flux cleaned = -0.00930453 Jy ! Component: 3700 - total flux cleaned = -0.00932862 Jy ! Component: 3750 - total flux cleaned = -0.00938856 Jy ! Component: 3800 - total flux cleaned = -0.00946003 Jy ! Component: 3850 - total flux cleaned = -0.00955451 Jy ! Component: 3900 - total flux cleaned = -0.00964848 Jy ! Component: 3950 - total flux cleaned = -0.00970676 Jy ! Component: 4000 - total flux cleaned = -0.00977641 Jy ! Component: 4050 - total flux cleaned = -0.00986871 Jy ! Total flux subtracted in 4096 components = -0.00994903 Jy ! Clean residual min=-0.000620 max=0.000641 Jy/beam ! Clean residual mean=-0.000006 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.102962 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 383 components and 0.102962 Jy ![Exited script file: muppet] wmap "J0615-3117_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.147 x 15.65 at -21.65 degrees (North through East) ! Clean map min=-0.002841 max=0.08485 Jy/beam ! Writing clean map to FITS file: J0615-3117_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0848503 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000212324 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.750701 0.750701 1.5014 3.00281 6.00561 12.0112 24.0224 48.0449 96.0898 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.084 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.147 x 15.65 at -21.65 degrees (North through East) ! Clean map min=-0.002841 max=0.08485 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0615-3117_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:06:15 2019