! Started logfile: J0612-4337_S_2017_02_24_pus_uvs.log on Sat May 4 11:20:20 2019 obs J0612-4337_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0612-4337_S_2017_02_24_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.394176 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0612-4337 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 10288 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0612-4337_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 665 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 575 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 574 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 917 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.950524Jy sigma=0.033064 ! Fit after self-cal, rms=0.910958Jy sigma=0.032912 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=10.2 mas, bpa=-5.011 degrees ! Estimated noise=1259.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267798 Jy ! Component: 100 - total flux cleaned = 0.0268625 Jy ! Total flux subtracted in 100 components = 0.0268625 Jy ! Clean residual min=-0.017756 max=0.017790 Jy/beam ! Clean residual mean=0.000225 rms=0.006636 Jy/beam ! Combined flux in latest and established models = 0.0268625 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0268625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147094Jy sigma=0.001101 ! Fit after self-cal, rms=0.146875Jy sigma=0.001095 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=11.32 mas, bpa=-7.162 degrees ! Estimated noise=699.206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187 Jy ! Component: 100 - total flux cleaned = 0.022315 Jy ! Component: 150 - total flux cleaned = 0.0221192 Jy ! Component: 200 - total flux cleaned = 0.0219322 Jy ! Total flux subtracted in 200 components = 0.0219322 Jy ! Clean residual min=-0.018431 max=0.021462 Jy/beam ! Clean residual mean=0.001294 rms=0.007089 Jy/beam ! Combined flux in latest and established models = 0.0487946 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 0.0487946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137788Jy sigma=0.001557 ! Fit after self-cal, rms=0.137689Jy sigma=0.001557 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.66 HN 1.00* KP 0.61 ! LA 0.61 MK 0.88 NL 0.72 OV 0.61 ! PT 0.62 SC 1.16 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.60 HN 1.00* KP 0.61 ! LA 0.56 MK 0.88 NL 0.66 OV 0.61 ! PT 0.60 SC 1.19 ! ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.61 HN 1.00* KP 0.66 ! LA 0.60 MK 0.81 NL 0.69 OV 0.59 ! PT 0.66 SC 1.19 ! ! ! Correcting IF 4. ! A total of 174 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 1.00* ! LA 10.25 MK 0.76 NL 1.00* OV 0.98 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.137689Jy sigma=0.001557 ! Fit after self-cal, rms=0.074447Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=10.48 mas, bpa=-2.845 degrees ! Estimated noise=701.518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.02849e-05 Jy ! Component: 100 - total flux cleaned = 8.21556e-05 Jy ! Component: 150 - total flux cleaned = 5.38325e-05 Jy ! Component: 200 - total flux cleaned = 8.28972e-05 Jy ! Total flux subtracted in 200 components = 8.28972e-05 Jy ! Clean residual min=-0.003366 max=0.003728 Jy/beam ! Clean residual mean=-0.000125 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.0488775 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 0.0488775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074382Jy sigma=0.000659 ! Fit after self-cal, rms=0.073575Jy sigma=0.000652 ! Inverting map ! Added new window around map position (-21, 126). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438988 Jy ! Component: 100 - total flux cleaned = 0.00542951 Jy ! Component: 150 - total flux cleaned = 0.00566714 Jy ! Component: 200 - total flux cleaned = 0.00572048 Jy ! Total flux subtracted in 200 components = 0.00572048 Jy ! Clean residual min=-0.003363 max=0.003412 Jy/beam ! Clean residual mean=-0.000047 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.054598 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.054598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073222Jy sigma=0.000648 ! Fit after self-cal, rms=0.073216Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073216Jy sigma=0.000647 ! Fit after self-cal, rms=0.069238Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.55 mas, bmaj=10.51 mas, bpa=-3.579 degrees ! Estimated noise=705.759 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334468 Jy ! Component: 100 - total flux cleaned = 0.000333737 Jy ! Component: 150 - total flux cleaned = 0.000311322 Jy ! Component: 200 - total flux cleaned = 0.000312183 Jy ! Total flux subtracted in 200 components = 0.000312183 Jy ! Clean residual min=-0.001701 max=0.001855 Jy/beam ! Clean residual mean=0.000011 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0549102 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.0549102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069210Jy sigma=0.000639 ! Fit after self-cal, rms=0.069077Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216325 Jy ! Component: 100 - total flux cleaned = 0.000269505 Jy ! Component: 150 - total flux cleaned = 0.000247498 Jy ! Component: 200 - total flux cleaned = 0.000248077 Jy ! Total flux subtracted in 200 components = 0.000248077 Jy ! Clean residual min=-0.001708 max=0.001873 Jy/beam ! Clean residual mean=0.000019 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0551583 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.0551583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069046Jy sigma=0.000636 ! Fit after self-cal, rms=0.069072Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069072Jy sigma=0.000636 ! Fit after self-cal, rms=0.069143Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=10.48 mas, bpa=-3.684 degrees ! Estimated noise=706.626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.67603e-05 Jy ! Component: 100 - total flux cleaned = 3.54491e-05 Jy ! Component: 150 - total flux cleaned = 5.67454e-05 Jy ! Component: 200 - total flux cleaned = 7.78143e-05 Jy ! Total flux subtracted in 200 components = 7.78143e-05 Jy ! Clean residual min=-0.001612 max=0.001711 Jy/beam ! Clean residual mean=0.000013 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0552361 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.0552361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069116Jy sigma=0.000636 ! Fit after self-cal, rms=0.069134Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.41634e-05 Jy ! Component: 100 - total flux cleaned = -1.25511e-05 Jy ! Component: 150 - total flux cleaned = 6.78281e-06 Jy ! Component: 200 - total flux cleaned = 7.18338e-06 Jy ! Total flux subtracted in 200 components = 7.18338e-06 Jy ! Clean residual min=-0.001599 max=0.001701 Jy/beam ! Clean residual mean=0.000015 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0552433 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 89 components and 0.0552433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069112Jy sigma=0.000636 ! Fit after self-cal, rms=0.069121Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069121Jy sigma=0.000636 ! Fit after self-cal, rms=0.069025Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.89 mas, bmaj=37.85 mas, bpa=-1.712 degrees ! Estimated noise=766.473 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253325 Jy ! Component: 100 - total flux cleaned = 0.00031908 Jy ! Component: 150 - total flux cleaned = 0.000360734 Jy ! Component: 200 - total flux cleaned = 0.000373575 Jy ! Total flux subtracted in 200 components = 0.000373575 Jy ! Clean residual min=-0.001207 max=0.001351 Jy/beam ! Clean residual mean=0.000021 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0556168 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 96 components and 0.0556168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069028Jy sigma=0.000636 ! Fit after self-cal, rms=0.069029Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.05003e-05 Jy ! Component: 100 - total flux cleaned = 5.56402e-05 Jy ! Component: 150 - total flux cleaned = 5.5723e-05 Jy ! Component: 200 - total flux cleaned = 6.69808e-05 Jy ! Total flux subtracted in 200 components = 6.69808e-05 Jy ! Clean residual min=-0.001180 max=0.001327 Jy/beam ! Clean residual mean=0.000024 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0556838 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 100 components and 0.0556838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069031Jy sigma=0.000636 ! Fit after self-cal, rms=0.069028Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=10.46 mas, bpa=-3.648 degrees ! Estimated noise=706.603 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.532 x 10.46 at -3.648 degrees (North through East) ! Clean map min=-0.0030133 max=0.051598 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=8.386 mas, bpa=-0.9765 degrees ! Estimated noise=1722.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0396684 Jy ! Component: 100 - total flux cleaned = 0.04981 Jy ! Component: 150 - total flux cleaned = 0.0503766 Jy ! Component: 200 - total flux cleaned = 0.0507248 Jy ! Total flux subtracted in 200 components = 0.0507248 Jy ! Clean residual min=-0.004083 max=0.004450 Jy/beam ! Clean residual mean=-0.000048 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 0.0507248 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0507248 Jy ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=10.46 mas, bpa=-3.648 degrees ! Estimated noise=706.603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00363771 Jy ! Component: 100 - total flux cleaned = 0.00472718 Jy ! Component: 150 - total flux cleaned = 0.00477617 Jy ! Component: 200 - total flux cleaned = 0.00482071 Jy ! Total flux subtracted in 200 components = 0.00482071 Jy ! Clean residual min=-0.002256 max=0.002340 Jy/beam ! Clean residual mean=-0.000007 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0555455 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.0555455 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.89 mas, bmaj=37.85 mas, bpa=-1.712 degrees ! Estimated noise=766.473 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277748 Jy ! Component: 100 - total flux cleaned = 0.000249082 Jy ! Component: 150 - total flux cleaned = 0.000222753 Jy ! Component: 200 - total flux cleaned = 0.000197686 Jy ! Total flux subtracted in 200 components = 0.000197686 Jy ! Clean residual min=-0.001455 max=0.001629 Jy/beam ! Clean residual mean=0.000009 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0557432 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.21066e-05 Jy ! Component: 100 - total flux cleaned = -4.14472e-05 Jy ! Component: 150 - total flux cleaned = -4.20401e-05 Jy ! Component: 200 - total flux cleaned = -4.3446e-05 Jy ! Total flux subtracted in 200 components = -4.3446e-05 Jy ! Clean residual min=-0.001385 max=0.001491 Jy/beam ! Clean residual mean=0.000011 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0556998 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.0556997 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=10.46 mas, bpa=-3.648 degrees ! Estimated noise=706.603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129928 Jy ! Component: 100 - total flux cleaned = 5.38101e-05 Jy ! Component: 150 - total flux cleaned = 5.1303e-05 Jy ! Component: 200 - total flux cleaned = 5.02381e-05 Jy ! Total flux subtracted in 200 components = 5.02381e-05 Jy ! Clean residual min=-0.001768 max=0.001861 Jy/beam ! Clean residual mean=0.000008 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.05575 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.05575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069140Jy sigma=0.000636 ! Fit after self-cal, rms=0.069206Jy sigma=0.000636 wmodel J0612-4337_S_2017_02_24_pus_map.mod ! Writing 60 model components to file: J0612-4337_S_2017_02_24_pus_map.mod wobs J0612-4337_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0612-4337_S_2017_02_24_pus_uvs.fits wwins J0612-4337_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J0612-4337_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.67499e-05 Jy ! Component: 100 - total flux cleaned = 4.88823e-05 Jy ! Component: 150 - total flux cleaned = 0.000181612 Jy ! Component: 200 - total flux cleaned = 0.000283814 Jy ! Component: 250 - total flux cleaned = 0.000212033 Jy ! Component: 300 - total flux cleaned = 4.99404e-05 Jy ! Component: 350 - total flux cleaned = -3.8908e-05 Jy ! Component: 400 - total flux cleaned = -0.000167407 Jy ! Component: 450 - total flux cleaned = -0.000250065 Jy ! Component: 500 - total flux cleaned = -0.00041037 Jy ! Component: 550 - total flux cleaned = -0.000545856 Jy ! Component: 600 - total flux cleaned = -0.00071482 Jy ! Component: 650 - total flux cleaned = -0.000823616 Jy ! Component: 700 - total flux cleaned = -0.000999949 Jy ! Component: 750 - total flux cleaned = -0.0011027 Jy ! Component: 800 - total flux cleaned = -0.00123656 Jy ! Component: 850 - total flux cleaned = -0.00136693 Jy ! Component: 900 - total flux cleaned = -0.00147838 Jy ! Component: 950 - total flux cleaned = -0.00163348 Jy ! Component: 1000 - total flux cleaned = -0.00173948 Jy ! Component: 1050 - total flux cleaned = -0.0018729 Jy ! Component: 1100 - total flux cleaned = -0.00196002 Jy ! Component: 1150 - total flux cleaned = -0.00201705 Jy ! Component: 1200 - total flux cleaned = -0.00214216 Jy ! Component: 1250 - total flux cleaned = -0.00219655 Jy ! Component: 1300 - total flux cleaned = -0.00227659 Jy ! Component: 1350 - total flux cleaned = -0.00234218 Jy ! Component: 1400 - total flux cleaned = -0.00240656 Jy ! Component: 1450 - total flux cleaned = -0.0024824 Jy ! Component: 1500 - total flux cleaned = -0.00255697 Jy ! Component: 1550 - total flux cleaned = -0.00261796 Jy ! Component: 1600 - total flux cleaned = -0.002666 Jy ! Component: 1650 - total flux cleaned = -0.0027253 Jy ! Component: 1700 - total flux cleaned = -0.00283045 Jy ! Component: 1750 - total flux cleaned = -0.0028533 Jy ! Component: 1800 - total flux cleaned = -0.00292145 Jy ! Component: 1850 - total flux cleaned = -0.00297746 Jy ! Component: 1900 - total flux cleaned = -0.0030107 Jy ! Component: 1950 - total flux cleaned = -0.00305462 Jy ! Component: 2000 - total flux cleaned = -0.00309805 Jy ! Component: 2050 - total flux cleaned = -0.00311961 Jy ! Component: 2100 - total flux cleaned = -0.00315144 Jy ! Component: 2150 - total flux cleaned = -0.00316186 Jy ! Component: 2200 - total flux cleaned = -0.00318267 Jy ! Component: 2250 - total flux cleaned = -0.00317227 Jy ! Component: 2300 - total flux cleaned = -0.00318258 Jy ! Component: 2350 - total flux cleaned = -0.00318255 Jy ! Component: 2400 - total flux cleaned = -0.0032229 Jy ! Component: 2450 - total flux cleaned = -0.00325289 Jy ! Component: 2500 - total flux cleaned = -0.0032627 Jy ! Component: 2550 - total flux cleaned = -0.00328247 Jy ! Component: 2600 - total flux cleaned = -0.00333152 Jy ! Component: 2650 - total flux cleaned = -0.00336074 Jy ! Component: 2700 - total flux cleaned = -0.00338014 Jy ! Component: 2750 - total flux cleaned = -0.00342852 Jy ! Component: 2800 - total flux cleaned = -0.00346704 Jy ! Component: 2850 - total flux cleaned = -0.00351496 Jy ! Component: 2900 - total flux cleaned = -0.00354363 Jy ! Component: 2950 - total flux cleaned = -0.00358172 Jy ! Component: 3000 - total flux cleaned = -0.00365778 Jy ! Component: 3050 - total flux cleaned = -0.00368628 Jy ! Component: 3100 - total flux cleaned = -0.00372431 Jy ! Component: 3150 - total flux cleaned = -0.00375277 Jy ! Component: 3200 - total flux cleaned = -0.00380971 Jy ! Component: 3250 - total flux cleaned = -0.00384769 Jy ! Component: 3300 - total flux cleaned = -0.00389528 Jy ! Component: 3350 - total flux cleaned = -0.00393347 Jy ! Component: 3400 - total flux cleaned = -0.00396219 Jy ! Component: 3450 - total flux cleaned = -0.00399097 Jy ! Component: 3500 - total flux cleaned = -0.00401028 Jy ! Component: 3550 - total flux cleaned = -0.00405882 Jy ! Component: 3600 - total flux cleaned = -0.00407835 Jy ! Component: 3650 - total flux cleaned = -0.00413735 Jy ! Component: 3700 - total flux cleaned = -0.00416707 Jy ! Component: 3750 - total flux cleaned = -0.00419699 Jy ! Component: 3800 - total flux cleaned = -0.00423721 Jy ! Component: 3850 - total flux cleaned = -0.00425743 Jy ! Component: 3900 - total flux cleaned = -0.00429835 Jy ! Component: 3950 - total flux cleaned = -0.00432944 Jy ! Component: 4000 - total flux cleaned = -0.00436081 Jy ! Component: 4050 - total flux cleaned = -0.00438183 Jy ! Total flux subtracted in 4096 components = -0.0044137 Jy ! Clean residual min=-0.000644 max=0.000711 Jy/beam ! Clean residual mean=-0.000017 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.0513363 Jy keep ! Adding 201 model components to the UV plane model. ! The established model now contains 261 components and 0.0513363 Jy ![Exited script file: muppet] wmap "J0612-4337_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.532 x 10.46 at -3.648 degrees (North through East) ! Clean map min=-0.0027096 max=0.048528 Jy/beam ! Writing clean map to FITS file: J0612-4337_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0485282 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018803 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.1624 1.1624 2.3248 4.64959 9.29918 18.5984 37.1967 74.3935 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.048 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.532 x 10.46 at -3.648 degrees (North through East) ! Clean map min=-0.0027096 max=0.048528 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0612-4337_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:20:25 2019