! Started logfile: J0611-2827_S_2017_10_21_pus_uvs.log on Sat May 11 20:52:13 2019 obs J0611-2827_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0611-2827_S_2017_10_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.753865 visibilities/baseline/integration-bin. ! Found source: J0611-2827 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 12484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0611-2827_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 548 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.903192Jy sigma=0.006982 ! Fit after self-cal, rms=0.887175Jy sigma=0.006866 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.471 mas, bmaj=16.01 mas, bpa=-20.84 degrees ! Estimated noise=1475.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0873161 Jy ! Component: 100 - total flux cleaned = 0.108514 Jy ! Total flux subtracted in 100 components = 0.108514 Jy ! Clean residual min=-0.007471 max=0.008852 Jy/beam ! Clean residual mean=-0.000006 rms=0.002036 Jy/beam ! Combined flux in latest and established models = 0.108514 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.108514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109350Jy sigma=0.000759 ! Fit after self-cal, rms=0.109284Jy sigma=0.000759 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.179 mas, bmaj=18.22 mas, bpa=-20.56 degrees ! Estimated noise=928.148 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166704 Jy ! Component: 100 - total flux cleaned = 0.0259254 Jy ! Component: 150 - total flux cleaned = 0.031477 Jy ! Component: 200 - total flux cleaned = 0.0349239 Jy ! Total flux subtracted in 200 components = 0.0349239 Jy ! Clean residual min=-0.004347 max=0.004233 Jy/beam ! Clean residual mean=-0.000033 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.143438 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 98 components and 0.143438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106852Jy sigma=0.000736 ! Fit after self-cal, rms=0.106857Jy sigma=0.000735 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.06 KP 1.06 ! LA 1.01 MK 1.01 NL 0.92 OV 1.01 ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.13 KP 1.02 ! LA 1.03 MK 1.02 NL 1.00 OV 1.02 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.01 KP 1.08 ! LA 0.78 MK 1.01 NL 1.19 OV 0.93 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.90 KP 1.00* ! LA 0.83 MK 1.06 NL 1.00* OV 1.00* ! PT 0.91 ! ! ! Fit before self-cal, rms=0.106857Jy sigma=0.000735 ! Fit after self-cal, rms=0.104147Jy sigma=0.000729 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=18.34 mas, bpa=-20.61 degrees ! Estimated noise=920.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000656857 Jy ! Component: 100 - total flux cleaned = -0.000618429 Jy ! Component: 150 - total flux cleaned = -0.000588826 Jy ! Component: 200 - total flux cleaned = -0.00055875 Jy ! Total flux subtracted in 200 components = -0.00055875 Jy ! Clean residual min=-0.003444 max=0.003312 Jy/beam ! Clean residual mean=0.000000 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.142879 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 111 components and 0.142879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104115Jy sigma=0.000729 ! Fit after self-cal, rms=0.104134Jy sigma=0.000729 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104134Jy sigma=0.000729 ! Fit after self-cal, rms=0.104334Jy sigma=0.000728 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=18.35 mas, bpa=-20.62 degrees ! Estimated noise=919.477 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000565186 Jy ! Component: 100 - total flux cleaned = -0.000565245 Jy ! Component: 150 - total flux cleaned = -0.000516208 Jy ! Component: 200 - total flux cleaned = -0.000472294 Jy ! Total flux subtracted in 200 components = -0.000472294 Jy ! Clean residual min=-0.003351 max=0.003279 Jy/beam ! Clean residual mean=0.000001 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.142407 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 116 components and 0.142407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104319Jy sigma=0.000728 ! Fit after self-cal, rms=0.104319Jy sigma=0.000728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.76914e-05 Jy ! Component: 100 - total flux cleaned = 9.13788e-05 Jy ! Component: 150 - total flux cleaned = 0.000133499 Jy ! Component: 200 - total flux cleaned = 0.000173113 Jy ! Total flux subtracted in 200 components = 0.000173113 Jy ! Clean residual min=-0.003311 max=0.003281 Jy/beam ! Clean residual mean=0.000001 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.14258 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 119 components and 0.14258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104310Jy sigma=0.000728 ! Fit after self-cal, rms=0.104308Jy sigma=0.000728 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104308Jy sigma=0.000728 ! Fit after self-cal, rms=0.104438Jy sigma=0.000727 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=18.43 mas, bpa=-20.65 degrees ! Estimated noise=918.146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274416 Jy ! Component: 100 - total flux cleaned = -0.000335196 Jy ! Component: 150 - total flux cleaned = -0.00033517 Jy ! Component: 200 - total flux cleaned = -0.000352133 Jy ! Total flux subtracted in 200 components = -0.000352133 Jy ! Clean residual min=-0.003098 max=0.002959 Jy/beam ! Clean residual mean=0.000000 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.142228 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 124 components and 0.142228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104430Jy sigma=0.000727 ! Fit after self-cal, rms=0.104481Jy sigma=0.000727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58044e-06 Jy ! Component: 100 - total flux cleaned = 1.67027e-05 Jy ! Component: 150 - total flux cleaned = 1.73493e-05 Jy ! Component: 200 - total flux cleaned = 3.07738e-05 Jy ! Total flux subtracted in 200 components = 3.07738e-05 Jy ! Clean residual min=-0.003054 max=0.002958 Jy/beam ! Clean residual mean=0.000001 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.142259 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 129 components and 0.142259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104477Jy sigma=0.000727 ! Fit after self-cal, rms=0.104474Jy sigma=0.000727 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104474Jy sigma=0.000727 ! Fit after self-cal, rms=0.104753Jy sigma=0.000727 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.049 mas, bmaj=33.79 mas, bpa=-9.399 degrees ! Estimated noise=1071.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414091 Jy ! Component: 100 - total flux cleaned = 0.000454757 Jy ! Component: 150 - total flux cleaned = 0.000471699 Jy ! Component: 200 - total flux cleaned = 0.000488042 Jy ! Total flux subtracted in 200 components = 0.000488042 Jy ! Clean residual min=-0.003034 max=0.002983 Jy/beam ! Clean residual mean=0.000001 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.142747 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 149 components and 0.142747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104756Jy sigma=0.000727 ! Fit after self-cal, rms=0.104799Jy sigma=0.000727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.9692e-06 Jy ! Component: 100 - total flux cleaned = 2.37403e-05 Jy ! Component: 150 - total flux cleaned = 3.71439e-05 Jy ! Component: 200 - total flux cleaned = 4.94178e-05 Jy ! Total flux subtracted in 200 components = 4.94178e-05 Jy ! Clean residual min=-0.002995 max=0.002957 Jy/beam ! Clean residual mean=0.000002 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.142796 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 156 components and 0.142796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104801Jy sigma=0.000727 ! Fit after self-cal, rms=0.104804Jy sigma=0.000727 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=18.45 mas, bpa=-20.69 degrees ! Estimated noise=916.997 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.223 x 18.45 at -20.69 degrees (North through East) ! Clean map min=-0.0034614 max=0.11298 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.498 mas, bmaj=16.08 mas, bpa=-20.93 degrees ! Estimated noise=1477.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0867043 Jy ! Component: 100 - total flux cleaned = 0.108073 Jy ! Component: 150 - total flux cleaned = 0.118554 Jy ! Component: 200 - total flux cleaned = 0.125402 Jy ! Total flux subtracted in 200 components = 0.125402 Jy ! Clean residual min=-0.005153 max=0.004439 Jy/beam ! Clean residual mean=0.000003 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.125402 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.125402 Jy ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=18.45 mas, bpa=-20.69 degrees ! Estimated noise=916.997 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00712874 Jy ! Component: 100 - total flux cleaned = 0.0111577 Jy ! Component: 150 - total flux cleaned = 0.0136012 Jy ! Component: 200 - total flux cleaned = 0.0151241 Jy ! Total flux subtracted in 200 components = 0.0151241 Jy ! Clean residual min=-0.002994 max=0.003025 Jy/beam ! Clean residual mean=-0.000002 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.140526 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 94 components and 0.140526 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.049 mas, bmaj=33.79 mas, bpa=-9.399 degrees ! Estimated noise=1071.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167579 Jy ! Component: 100 - total flux cleaned = 0.002473 Jy ! Component: 150 - total flux cleaned = 0.00255802 Jy ! Component: 200 - total flux cleaned = 0.00263461 Jy ! Total flux subtracted in 200 components = 0.00263461 Jy ! Clean residual min=-0.002935 max=0.003021 Jy/beam ! Clean residual mean=0.000002 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.143161 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.08971e-05 Jy ! Component: 100 - total flux cleaned = 0.000103032 Jy ! Component: 150 - total flux cleaned = 0.000132969 Jy ! Component: 200 - total flux cleaned = 0.000162112 Jy ! Total flux subtracted in 200 components = 0.000162112 Jy ! Clean residual min=-0.002935 max=0.003005 Jy/beam ! Clean residual mean=0.000002 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.143323 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 109 components and 0.143323 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=18.45 mas, bpa=-20.69 degrees ! Estimated noise=916.997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000536841 Jy ! Component: 100 - total flux cleaned = -0.00053691 Jy ! Component: 150 - total flux cleaned = -0.000560652 Jy ! Component: 200 - total flux cleaned = -0.000581775 Jy ! Total flux subtracted in 200 components = -0.000581775 Jy ! Clean residual min=-0.002905 max=0.003071 Jy/beam ! Clean residual mean=0.000001 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.142741 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 123 components and 0.142741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104799Jy sigma=0.000727 ! Fit after self-cal, rms=0.104785Jy sigma=0.000727 wmodel J0611-2827_S_2017_10_21_pus_map.mod ! Writing 123 model components to file: J0611-2827_S_2017_10_21_pus_map.mod wobs J0611-2827_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0611-2827_S_2017_10_21_pus_uvs.fits wwins J0611-2827_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0611-2827_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507485 Jy ! Component: 100 - total flux cleaned = 0.000555427 Jy ! Component: 150 - total flux cleaned = 0.000291039 Jy ! Component: 200 - total flux cleaned = 0.00033168 Jy ! Component: 250 - total flux cleaned = 0.000409862 Jy ! Component: 300 - total flux cleaned = 0.000411515 Jy ! Component: 350 - total flux cleaned = 0.000410887 Jy ! Component: 400 - total flux cleaned = 0.000378003 Jy ! Component: 450 - total flux cleaned = 0.00025053 Jy ! Component: 500 - total flux cleaned = 9.4685e-05 Jy ! Component: 550 - total flux cleaned = -2.64555e-05 Jy ! Component: 600 - total flux cleaned = -0.000172367 Jy ! Component: 650 - total flux cleaned = -0.000229587 Jy ! Component: 700 - total flux cleaned = -0.000202822 Jy ! Component: 750 - total flux cleaned = -0.00023147 Jy ! Component: 800 - total flux cleaned = -0.000338418 Jy ! Component: 850 - total flux cleaned = -0.00026031 Jy ! Component: 900 - total flux cleaned = -0.000337566 Jy ! Component: 950 - total flux cleaned = -0.000412038 Jy ! Component: 1000 - total flux cleaned = -0.000387008 Jy ! Component: 1050 - total flux cleaned = -0.000315571 Jy ! Component: 1100 - total flux cleaned = -0.000269222 Jy ! Component: 1150 - total flux cleaned = -0.000269277 Jy ! Component: 1200 - total flux cleaned = -0.000223728 Jy ! Component: 1250 - total flux cleaned = -0.000201437 Jy ! Component: 1300 - total flux cleaned = -0.00020121 Jy ! Component: 1350 - total flux cleaned = -0.00020065 Jy ! Component: 1400 - total flux cleaned = -0.000137128 Jy ! Component: 1450 - total flux cleaned = -9.5689e-05 Jy ! Component: 1500 - total flux cleaned = -3.45017e-05 Jy ! Component: 1550 - total flux cleaned = -5.45943e-05 Jy ! Component: 1600 - total flux cleaned = 5.30177e-06 Jy ! Component: 1650 - total flux cleaned = 4.45407e-05 Jy ! Component: 1700 - total flux cleaned = 2.49333e-05 Jy ! Component: 1750 - total flux cleaned = 8.19643e-05 Jy ! Component: 1800 - total flux cleaned = 6.30939e-05 Jy ! Component: 1850 - total flux cleaned = 4.43908e-05 Jy ! Component: 1900 - total flux cleaned = 4.45571e-05 Jy ! Component: 1950 - total flux cleaned = 9.91384e-05 Jy ! Component: 2000 - total flux cleaned = 0.000152827 Jy ! Component: 2050 - total flux cleaned = 0.000152773 Jy ! Component: 2100 - total flux cleaned = 0.000187698 Jy ! Component: 2150 - total flux cleaned = 0.000205289 Jy ! Component: 2200 - total flux cleaned = 0.000222418 Jy ! Component: 2250 - total flux cleaned = 0.000323769 Jy ! Component: 2300 - total flux cleaned = 0.000307133 Jy ! Component: 2350 - total flux cleaned = 0.000356839 Jy ! Component: 2400 - total flux cleaned = 0.00040595 Jy ! Component: 2450 - total flux cleaned = 0.000454514 Jy ! Component: 2500 - total flux cleaned = 0.000470516 Jy ! Component: 2550 - total flux cleaned = 0.000533895 Jy ! Component: 2600 - total flux cleaned = 0.000549588 Jy ! Component: 2650 - total flux cleaned = 0.000596197 Jy ! Component: 2700 - total flux cleaned = 0.000611497 Jy ! Component: 2750 - total flux cleaned = 0.000641973 Jy ! Component: 2800 - total flux cleaned = 0.000672032 Jy ! Component: 2850 - total flux cleaned = 0.000746991 Jy ! Component: 2900 - total flux cleaned = 0.000747002 Jy ! Component: 2950 - total flux cleaned = 0.000761754 Jy ! Component: 3000 - total flux cleaned = 0.000820195 Jy ! Component: 3050 - total flux cleaned = 0.000878167 Jy ! Component: 3100 - total flux cleaned = 0.000906976 Jy ! Component: 3150 - total flux cleaned = 0.0009071 Jy ! Component: 3200 - total flux cleaned = 0.00094982 Jy ! Component: 3250 - total flux cleaned = 0.00100617 Jy ! Component: 3300 - total flux cleaned = 0.00102008 Jy ! Component: 3350 - total flux cleaned = 0.0010616 Jy ! Component: 3400 - total flux cleaned = 0.00108911 Jy ! Component: 3450 - total flux cleaned = 0.00110285 Jy ! Component: 3500 - total flux cleaned = 0.00117086 Jy ! Component: 3550 - total flux cleaned = 0.00123861 Jy ! Component: 3600 - total flux cleaned = 0.00127885 Jy ! Component: 3650 - total flux cleaned = 0.0013189 Jy ! Component: 3700 - total flux cleaned = 0.00137205 Jy ! Component: 3750 - total flux cleaned = 0.00138521 Jy ! Component: 3800 - total flux cleaned = 0.0014641 Jy ! Component: 3850 - total flux cleaned = 0.00150325 Jy ! Component: 3900 - total flux cleaned = 0.00155506 Jy ! Component: 3950 - total flux cleaned = 0.00156795 Jy ! Component: 4000 - total flux cleaned = 0.00164506 Jy ! Component: 4050 - total flux cleaned = 0.0016578 Jy ! Total flux subtracted in 4096 components = 0.00172137 Jy ! Clean residual min=-0.000863 max=0.000843 Jy/beam ! Clean residual mean=0.000007 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.144463 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 397 components and 0.144463 Jy ![Exited script file: muppet] wmap "J0611-2827_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.223 x 18.45 at -20.69 degrees (North through East) ! Clean map min=-0.0017791 max=0.11393 Jy/beam ! Writing clean map to FITS file: J0611-2827_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11393 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230886 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.607968 0.607968 1.21594 2.43187 4.86375 9.72749 19.455 38.91 77.82 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.223 x 18.45 at -20.69 degrees (North through East) ! Clean map min=-0.0017791 max=0.11393 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0611-2827_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:52:18 2019