! Started logfile: J0611-2827_S_2017_08_05_pus_uvs.log on Thu May 9 19:22:17 2019 obs J0611-2827_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0611-2827_S_2017_08_05_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.776618 visibilities/baseline/integration-bin. ! Found source: J0611-2827 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 16076 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0611-2827_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 738 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931803Jy sigma=0.006480 ! Fit after self-cal, rms=0.903273Jy sigma=0.006309 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.303 mas, bmaj=6.895 mas, bpa=-6.883 degrees ! Estimated noise=1459.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0765381 Jy ! Component: 100 - total flux cleaned = 0.0968778 Jy ! Total flux subtracted in 100 components = 0.0968778 Jy ! Clean residual min=-0.005422 max=0.009756 Jy/beam ! Clean residual mean=-0.000017 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.0968778 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0968778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104906Jy sigma=0.000671 ! Fit after self-cal, rms=0.104892Jy sigma=0.000671 ! Inverting map ! Added new window around map position (-3.5, -8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010317 Jy ! Component: 100 - total flux cleaned = 0.0158444 Jy ! Total flux subtracted in 100 components = 0.0158444 Jy ! Clean residual min=-0.004771 max=0.005800 Jy/beam ! Clean residual mean=-0.000009 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.112722 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.112722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103727Jy sigma=0.000661 ! Fit after self-cal, rms=0.103718Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=7.958 mas, bpa=-6.178 degrees ! Estimated noise=953.483 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627628 Jy ! Component: 100 - total flux cleaned = 0.0097472 Jy ! Component: 150 - total flux cleaned = 0.0118857 Jy ! Component: 200 - total flux cleaned = 0.0129604 Jy ! Total flux subtracted in 200 components = 0.0129604 Jy ! Clean residual min=-0.003331 max=0.003617 Jy/beam ! Clean residual mean=-0.000032 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.125683 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 41 components and 0.125683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103327Jy sigma=0.000658 ! Fit after self-cal, rms=0.103312Jy sigma=0.000658 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.97 KP 1.04 ! LA 1.01 MK 1.00 NL 0.85 OV 0.99 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.17 KP 1.00 ! LA 1.01 MK 1.00 NL 1.03 OV 1.06 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.20 KP 0.89 ! LA 0.78 MK 1.00 NL 1.18 OV 0.95 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.13 KP 1.00* ! LA 1.00* MK 1.00 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.103312Jy sigma=0.000658 ! Fit after self-cal, rms=0.105581Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.838 mas, bmaj=7.938 mas, bpa=-5.664 degrees ! Estimated noise=960.593 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000456894 Jy ! Component: 100 - total flux cleaned = -0.000415454 Jy ! Component: 150 - total flux cleaned = -0.000450854 Jy ! Component: 200 - total flux cleaned = -0.000451055 Jy ! Total flux subtracted in 200 components = -0.000451055 Jy ! Clean residual min=-0.002920 max=0.003052 Jy/beam ! Clean residual mean=-0.000020 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.125232 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 65 components and 0.125232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105547Jy sigma=0.000655 ! Fit after self-cal, rms=0.105617Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105617Jy sigma=0.000655 ! Fit after self-cal, rms=0.106401Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.835 mas, bmaj=7.929 mas, bpa=-5.722 degrees ! Estimated noise=958.803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375062 Jy ! Component: 100 - total flux cleaned = -0.000345282 Jy ! Component: 150 - total flux cleaned = -0.000345579 Jy ! Component: 200 - total flux cleaned = -0.000346264 Jy ! Total flux subtracted in 200 components = -0.000346264 Jy ! Clean residual min=-0.002794 max=0.003013 Jy/beam ! Clean residual mean=-0.000018 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.124885 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.124885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106381Jy sigma=0.000654 ! Fit after self-cal, rms=0.106408Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, -29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277995 Jy ! Component: 100 - total flux cleaned = 0.00398664 Jy ! Component: 150 - total flux cleaned = 0.00417144 Jy ! Component: 200 - total flux cleaned = 0.00426533 Jy ! Total flux subtracted in 200 components = 0.00426533 Jy ! Clean residual min=-0.002783 max=0.002316 Jy/beam ! Clean residual mean=-0.000016 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.129151 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 95 components and 0.129151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106330Jy sigma=0.000653 ! Fit after self-cal, rms=0.106325Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106325Jy sigma=0.000653 ! Fit after self-cal, rms=0.107242Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.836 mas, bmaj=7.929 mas, bpa=-5.706 degrees ! Estimated noise=955.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000351379 Jy ! Component: 100 - total flux cleaned = 0.000594807 Jy ! Component: 150 - total flux cleaned = 0.000697913 Jy ! Component: 200 - total flux cleaned = 0.000788511 Jy ! Total flux subtracted in 200 components = 0.000788511 Jy ! Clean residual min=-0.002453 max=0.002240 Jy/beam ! Clean residual mean=-0.000013 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.129939 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 105 components and 0.129939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107220Jy sigma=0.000653 ! Fit after self-cal, rms=0.107263Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.25608e-05 Jy ! Component: 100 - total flux cleaned = 0.000113529 Jy ! Component: 150 - total flux cleaned = 0.000151035 Jy ! Component: 200 - total flux cleaned = 0.00016792 Jy ! Total flux subtracted in 200 components = 0.00016792 Jy ! Clean residual min=-0.002451 max=0.002184 Jy/beam ! Clean residual mean=-0.000013 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.130107 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 112 components and 0.130107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107253Jy sigma=0.000653 ! Fit after self-cal, rms=0.107251Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107251Jy sigma=0.000653 ! Fit after self-cal, rms=0.107550Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.779 mas, bmaj=21.68 mas, bpa=-1.765 degrees ! Estimated noise=1239.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000667886 Jy ! Component: 100 - total flux cleaned = 0.000729152 Jy ! Component: 150 - total flux cleaned = 0.000757573 Jy ! Component: 200 - total flux cleaned = 0.000770128 Jy ! Total flux subtracted in 200 components = 0.000770128 Jy ! Clean residual min=-0.002793 max=0.002271 Jy/beam ! Clean residual mean=-0.000026 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.130877 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 119 components and 0.130877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107547Jy sigma=0.000653 ! Fit after self-cal, rms=0.107564Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118744 Jy ! Component: 100 - total flux cleaned = 9.53876e-05 Jy ! Component: 150 - total flux cleaned = 0.000105957 Jy ! Component: 200 - total flux cleaned = 0.000106338 Jy ! Total flux subtracted in 200 components = 0.000106338 Jy ! Clean residual min=-0.002798 max=0.002255 Jy/beam ! Clean residual mean=-0.000025 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.130984 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 124 components and 0.130984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107564Jy sigma=0.000653 ! Fit after self-cal, rms=0.107565Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=7.927 mas, bpa=-5.736 degrees ! Estimated noise=953.853 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.834 x 7.927 at -5.736 degrees (North through East) ! Clean map min=-0.0021839 max=0.097644 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.315 mas, bmaj=6.852 mas, bpa=-6.653 degrees ! Estimated noise=1455.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0755976 Jy ! Component: 100 - total flux cleaned = 0.0963417 Jy ! Component: 150 - total flux cleaned = 0.105788 Jy ! Component: 200 - total flux cleaned = 0.11121 Jy ! Total flux subtracted in 200 components = 0.11121 Jy ! Clean residual min=-0.003937 max=0.004531 Jy/beam ! Clean residual mean=-0.000009 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.11121 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.11121 Jy ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=7.927 mas, bpa=-5.736 degrees ! Estimated noise=953.853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582686 Jy ! Component: 100 - total flux cleaned = 0.00952115 Jy ! Component: 150 - total flux cleaned = 0.0121603 Jy ! Component: 200 - total flux cleaned = 0.0141611 Jy ! Total flux subtracted in 200 components = 0.0141611 Jy ! Clean residual min=-0.002600 max=0.002195 Jy/beam ! Clean residual mean=-0.000020 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.125371 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 58 components and 0.125371 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.779 mas, bmaj=21.68 mas, bpa=-1.765 degrees ! Estimated noise=1239.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270658 Jy ! Component: 100 - total flux cleaned = 0.0043109 Jy ! Component: 150 - total flux cleaned = 0.00528113 Jy ! Component: 200 - total flux cleaned = 0.00587838 Jy ! Total flux subtracted in 200 components = 0.00587838 Jy ! Clean residual min=-0.002812 max=0.002098 Jy/beam ! Clean residual mean=-0.000025 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.131249 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262312 Jy ! Component: 100 - total flux cleaned = 0.000289419 Jy ! Component: 150 - total flux cleaned = 0.00028911 Jy ! Component: 200 - total flux cleaned = 0.000288991 Jy ! Total flux subtracted in 200 components = 0.000288991 Jy ! Clean residual min=-0.002790 max=0.002036 Jy/beam ! Clean residual mean=-0.000024 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.131538 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.131538 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=7.927 mas, bpa=-5.736 degrees ! Estimated noise=953.853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284385 Jy ! Component: 100 - total flux cleaned = -0.000488856 Jy ! Component: 150 - total flux cleaned = -0.000628223 Jy ! Component: 200 - total flux cleaned = -0.000719929 Jy ! Total flux subtracted in 200 components = -0.000719929 Jy ! Clean residual min=-0.002332 max=0.002012 Jy/beam ! Clean residual mean=-0.000013 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.130818 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 95 components and 0.130818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107565Jy sigma=0.000653 ! Fit after self-cal, rms=0.107561Jy sigma=0.000653 wmodel J0611-2827_S_2017_08_05_pus_map.mod ! Writing 95 model components to file: J0611-2827_S_2017_08_05_pus_map.mod wobs J0611-2827_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0611-2827_S_2017_08_05_pus_uvs.fits wwins J0611-2827_S_2017_08_05_pus_map.win ! wwins: Wrote 4 windows to J0611-2827_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000759187 Jy ! Component: 100 - total flux cleaned = -0.000942331 Jy ! Component: 150 - total flux cleaned = -0.00091087 Jy ! Component: 200 - total flux cleaned = -0.000781936 Jy ! Component: 250 - total flux cleaned = -0.000656933 Jy ! Component: 300 - total flux cleaned = -0.000535932 Jy ! Component: 350 - total flux cleaned = -0.000506847 Jy ! Component: 400 - total flux cleaned = -0.000449816 Jy ! Component: 450 - total flux cleaned = -0.000421742 Jy ! Component: 500 - total flux cleaned = -0.000312099 Jy ! Component: 550 - total flux cleaned = -0.000312801 Jy ! Component: 600 - total flux cleaned = -0.000312375 Jy ! Component: 650 - total flux cleaned = -0.0002088 Jy ! Component: 700 - total flux cleaned = -0.000183389 Jy ! Component: 750 - total flux cleaned = -0.000158762 Jy ! Component: 800 - total flux cleaned = -0.000159007 Jy ! Component: 850 - total flux cleaned = -8.65191e-05 Jy ! Component: 900 - total flux cleaned = -8.6777e-05 Jy ! Component: 950 - total flux cleaned = -8.64146e-05 Jy ! Component: 1000 - total flux cleaned = -6.30885e-05 Jy ! Component: 1050 - total flux cleaned = -1.73028e-05 Jy ! Component: 1100 - total flux cleaned = 4.99835e-05 Jy ! Component: 1150 - total flux cleaned = -1.63462e-05 Jy ! Component: 1200 - total flux cleaned = -1.5961e-05 Jy ! Component: 1250 - total flux cleaned = -3.74321e-05 Jy ! Component: 1300 - total flux cleaned = -3.71464e-05 Jy ! Component: 1350 - total flux cleaned = -5.81018e-05 Jy ! Component: 1400 - total flux cleaned = -9.90462e-05 Jy ! Component: 1450 - total flux cleaned = -5.7378e-05 Jy ! Component: 1500 - total flux cleaned = -1.69828e-05 Jy ! Component: 1550 - total flux cleaned = -5.67657e-05 Jy ! Component: 1600 - total flux cleaned = 2.54072e-06 Jy ! Component: 1650 - total flux cleaned = 4.17198e-05 Jy ! Component: 1700 - total flux cleaned = 6.10424e-05 Jy ! Component: 1750 - total flux cleaned = 0.000118284 Jy ! Component: 1800 - total flux cleaned = 0.000155651 Jy ! Component: 1850 - total flux cleaned = 0.000174229 Jy ! Component: 1900 - total flux cleaned = 0.000192779 Jy ! Component: 1950 - total flux cleaned = 0.000210973 Jy ! Component: 2000 - total flux cleaned = 0.000174879 Jy ! Component: 2050 - total flux cleaned = 0.000282217 Jy ! Component: 2100 - total flux cleaned = 0.000264469 Jy ! Component: 2150 - total flux cleaned = 0.000282282 Jy ! Component: 2200 - total flux cleaned = 0.000334723 Jy ! Component: 2250 - total flux cleaned = 0.000386308 Jy ! Component: 2300 - total flux cleaned = 0.000420491 Jy ! Component: 2350 - total flux cleaned = 0.000488302 Jy ! Component: 2400 - total flux cleaned = 0.00042133 Jy ! Component: 2450 - total flux cleaned = 0.000471253 Jy ! Component: 2500 - total flux cleaned = 0.000586892 Jy ! Component: 2550 - total flux cleaned = 0.00063579 Jy ! Component: 2600 - total flux cleaned = 0.000684585 Jy ! Component: 2650 - total flux cleaned = 0.000732777 Jy ! Component: 2700 - total flux cleaned = 0.000764665 Jy ! Component: 2750 - total flux cleaned = 0.000733069 Jy ! Component: 2800 - total flux cleaned = 0.000796124 Jy ! Component: 2850 - total flux cleaned = 0.000936923 Jy ! Component: 2900 - total flux cleaned = 0.00102992 Jy ! Component: 2950 - total flux cleaned = 0.00107593 Jy ! Component: 3000 - total flux cleaned = 0.00119834 Jy ! Component: 3050 - total flux cleaned = 0.00125909 Jy ! Component: 3100 - total flux cleaned = 0.00134955 Jy ! Component: 3150 - total flux cleaned = 0.00139442 Jy ! Component: 3200 - total flux cleaned = 0.00149828 Jy ! Component: 3250 - total flux cleaned = 0.0015718 Jy ! Component: 3300 - total flux cleaned = 0.00161573 Jy ! Component: 3350 - total flux cleaned = 0.0016594 Jy ! Component: 3400 - total flux cleaned = 0.00177518 Jy ! Component: 3450 - total flux cleaned = 0.00177518 Jy ! Component: 3500 - total flux cleaned = 0.00186095 Jy ! Component: 3550 - total flux cleaned = 0.00197452 Jy ! Component: 3600 - total flux cleaned = 0.00200274 Jy ! Component: 3650 - total flux cleaned = 0.0020868 Jy ! Component: 3700 - total flux cleaned = 0.00214245 Jy ! Component: 3750 - total flux cleaned = 0.00211473 Jy ! Component: 3800 - total flux cleaned = 0.00211481 Jy ! Component: 3850 - total flux cleaned = 0.00221086 Jy ! Component: 3900 - total flux cleaned = 0.0022109 Jy ! Component: 3950 - total flux cleaned = 0.00221087 Jy ! Component: 4000 - total flux cleaned = 0.00225145 Jy ! Component: 4050 - total flux cleaned = 0.00222456 Jy ! Total flux subtracted in 4096 components = 0.00225131 Jy ! Clean residual min=-0.000812 max=0.000770 Jy/beam ! Clean residual mean=0.000002 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.13307 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 351 components and 0.13307 Jy ![Exited script file: muppet] wmap "J0611-2827_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.834 x 7.927 at -5.736 degrees (North through East) ! Clean map min=-0.0014565 max=0.099164 Jy/beam ! Writing clean map to FITS file: J0611-2827_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0991637 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000225656 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.682677 0.682677 1.36535 2.73071 5.46142 10.9228 21.8457 43.6914 87.3827 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.834 x 7.927 at -5.736 degrees (North through East) ! Clean map min=-0.0014565 max=0.099164 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0611-2827_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:22:22 2019