! Started logfile: J0611-1155_X_2017_05_01_pus_uvs.log on Wed May 1 19:53:03 2019 obs J0611-1155_X_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0611-1155_X_2017_05_01_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977005 visibilities/baseline/integration-bin. ! Found source: J0611-1155 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 863 lines of history. ! ! Reading 60672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0611-1155_X_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.947479Jy sigma=0.007343 ! Fit after self-cal, rms=0.927740Jy sigma=0.007233 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6605 mas, bmaj=1.698 mas, bpa=-0.1042 degrees ! Estimated noise=656.824 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0531211 Jy ! Component: 100 - total flux cleaned = 0.0706916 Jy ! Total flux subtracted in 100 components = 0.0706916 Jy ! Clean residual min=-0.004396 max=0.009309 Jy/beam ! Clean residual mean=0.000033 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.0706916 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0706916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102280Jy sigma=0.000685 ! Fit after self-cal, rms=0.102189Jy sigma=0.000685 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105472 Jy ! Component: 100 - total flux cleaned = 0.0169307 Jy ! Total flux subtracted in 100 components = 0.0169307 Jy ! Clean residual min=-0.003795 max=0.009591 Jy/beam ! Clean residual mean=0.000021 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.0876223 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.0876223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100510Jy sigma=0.000666 ! Fit after self-cal, rms=0.100508Jy sigma=0.000666 ! Inverting map ! Added new window around map position (1.6, -3.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00811555 Jy ! Component: 100 - total flux cleaned = 0.0128788 Jy ! Total flux subtracted in 100 components = 0.0128788 Jy ! Clean residual min=-0.003130 max=0.006675 Jy/beam ! Clean residual mean=0.000016 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.100501 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.100501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099692Jy sigma=0.000657 ! Fit after self-cal, rms=0.099597Jy sigma=0.000656 ! Inverting map ! Added new window around map position (-1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00638549 Jy ! Component: 100 - total flux cleaned = 0.0102666 Jy ! Total flux subtracted in 100 components = 0.0102666 Jy ! Clean residual min=-0.002538 max=0.003030 Jy/beam ! Clean residual mean=0.000010 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.110768 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.110768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099080Jy sigma=0.000651 ! Fit after self-cal, rms=0.099018Jy sigma=0.000650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8468 mas, bmaj=2.07 mas, bpa=1.291 degrees ! Estimated noise=378.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00558346 Jy ! Component: 100 - total flux cleaned = 0.00915692 Jy ! Component: 150 - total flux cleaned = 0.0117195 Jy ! Component: 200 - total flux cleaned = 0.0136473 Jy ! Total flux subtracted in 200 components = 0.0136473 Jy ! Clean residual min=-0.002478 max=0.002927 Jy/beam ! Clean residual mean=0.000008 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.124415 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 78 components and 0.124415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098680Jy sigma=0.000647 ! Fit after self-cal, rms=0.098642Jy sigma=0.000646 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 1.06 KP 0.93 ! LA 0.96 MK 1.00 NL 1.01 OV 1.04 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.01 KP 0.89 ! LA 0.92 MK 1.02 NL 1.07 OV 1.05 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.00 KP 0.90 ! LA 0.95 MK 1.03 NL 1.05 OV 1.03 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.04 KP 0.91 ! LA 0.98 MK 1.06 NL 1.08 OV 1.01 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.96 KP 0.92 ! LA 0.99 MK 1.08 NL 1.08 OV 1.02 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.98 KP 0.90 ! LA 0.96 MK 1.02 NL 1.06 OV 1.08 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.03 KP 0.96 ! LA 0.98 MK 1.10 NL 1.06 OV 1.05 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 HN 0.93 KP 0.95 ! LA 0.94 MK 1.07 NL 1.12 OV 1.05 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.09 KP 0.93 ! LA 0.97 MK 1.02 NL 1.05 OV 1.02 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.91 KP 0.91 ! LA 0.99 MK 0.95 NL 1.07 OV 1.05 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 HN 0.96 KP 0.98 ! LA 1.05 MK 0.96 NL 1.17 OV 1.09 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.02 KP 0.91 ! LA 0.98 MK 0.99 NL 0.99 OV 1.01 ! PT 1.04 SC 0.94 ! ! ! Fit before self-cal, rms=0.098642Jy sigma=0.000646 ! Fit after self-cal, rms=0.099417Jy sigma=0.000644 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8513 mas, bmaj=2.08 mas, bpa=1.706 degrees ! Estimated noise=375.168 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00089745 Jy ! Component: 100 - total flux cleaned = 0.00101245 Jy ! Component: 150 - total flux cleaned = 0.00113868 Jy ! Component: 200 - total flux cleaned = 0.0012181 Jy ! Total flux subtracted in 200 components = 0.0012181 Jy ! Clean residual min=-0.001527 max=0.001999 Jy/beam ! Clean residual mean=0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.125633 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.125633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099391Jy sigma=0.000644 ! Fit after self-cal, rms=0.099433Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099433Jy sigma=0.000644 ! Fit after self-cal, rms=0.096967Jy sigma=0.000643 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8512 mas, bmaj=2.073 mas, bpa=1.686 degrees ! Estimated noise=373.526 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000845223 Jy ! Component: 100 - total flux cleaned = 0.000946873 Jy ! Component: 150 - total flux cleaned = 0.000969171 Jy ! Component: 200 - total flux cleaned = 0.00102492 Jy ! Total flux subtracted in 200 components = 0.00102492 Jy ! Clean residual min=-0.001393 max=0.001819 Jy/beam ! Clean residual mean=0.000001 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.126658 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 89 components and 0.126658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096953Jy sigma=0.000643 ! Fit after self-cal, rms=0.096936Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016323 Jy ! Component: 100 - total flux cleaned = 0.00182555 Jy ! Component: 150 - total flux cleaned = 0.00204321 Jy ! Component: 200 - total flux cleaned = 0.00220269 Jy ! Total flux subtracted in 200 components = 0.00220269 Jy ! Clean residual min=-0.001298 max=0.001365 Jy/beam ! Clean residual mean=0.000001 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.128861 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 109 components and 0.128861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096904Jy sigma=0.000643 ! Fit after self-cal, rms=0.096890Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096890Jy sigma=0.000643 ! Fit after self-cal, rms=0.095909Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8497 mas, bmaj=2.068 mas, bpa=1.663 degrees ! Estimated noise=371.974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105959 Jy ! Component: 100 - total flux cleaned = 0.00150055 Jy ! Component: 150 - total flux cleaned = 0.00172309 Jy ! Component: 200 - total flux cleaned = 0.00185048 Jy ! Total flux subtracted in 200 components = 0.00185048 Jy ! Clean residual min=-0.001182 max=0.001187 Jy/beam ! Clean residual mean=0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.130711 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 115 components and 0.130711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095894Jy sigma=0.000642 ! Fit after self-cal, rms=0.095880Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000460569 Jy ! Component: 100 - total flux cleaned = 0.000560331 Jy ! Component: 150 - total flux cleaned = 0.000613922 Jy ! Component: 200 - total flux cleaned = 0.000647074 Jy ! Total flux subtracted in 200 components = 0.000647074 Jy ! Clean residual min=-0.001144 max=0.001215 Jy/beam ! Clean residual mean=0.000002 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.131358 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 123 components and 0.131358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095873Jy sigma=0.000642 ! Fit after self-cal, rms=0.095871Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095871Jy sigma=0.000642 ! Fit after self-cal, rms=0.095396Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.241 mas, bmaj=3.991 mas, bpa=3.51 degrees ! Estimated noise=462.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000891983 Jy ! Component: 100 - total flux cleaned = 0.00133114 Jy ! Component: 150 - total flux cleaned = 0.00143095 Jy ! Component: 200 - total flux cleaned = 0.00143099 Jy ! Total flux subtracted in 200 components = 0.00143099 Jy ! Clean residual min=-0.001041 max=0.001452 Jy/beam ! Clean residual mean=0.000002 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.132789 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 130 components and 0.132789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095393Jy sigma=0.000642 ! Fit after self-cal, rms=0.095390Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274768 Jy ! Component: 100 - total flux cleaned = 0.000299641 Jy ! Component: 150 - total flux cleaned = 0.000288568 Jy ! Component: 200 - total flux cleaned = 0.00027835 Jy ! Total flux subtracted in 200 components = 0.00027835 Jy ! Clean residual min=-0.001024 max=0.001432 Jy/beam ! Clean residual mean=0.000003 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.133068 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 134 components and 0.133068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095389Jy sigma=0.000642 ! Fit after self-cal, rms=0.095390Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8488 mas, bmaj=2.067 mas, bpa=1.579 degrees ! Estimated noise=371.444 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8488 x 2.067 at 1.579 degrees (North through East) ! Clean map min=-0.0011986 max=0.071806 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6631 mas, bmaj=1.698 mas, bpa=0.0505 degrees ! Estimated noise=644.427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510804 Jy ! Component: 100 - total flux cleaned = 0.0697348 Jy ! Component: 150 - total flux cleaned = 0.0827484 Jy ! Component: 200 - total flux cleaned = 0.0922536 Jy ! Total flux subtracted in 200 components = 0.0922536 Jy ! Clean residual min=-0.002932 max=0.005701 Jy/beam ! Clean residual mean=0.000019 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.0922536 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0922536 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8488 mas, bmaj=2.067 mas, bpa=1.579 degrees ! Estimated noise=371.444 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111306 Jy ! Component: 100 - total flux cleaned = 0.0183866 Jy ! Component: 150 - total flux cleaned = 0.0234994 Jy ! Component: 200 - total flux cleaned = 0.0272622 Jy ! Total flux subtracted in 200 components = 0.0272622 Jy ! Clean residual min=-0.001630 max=0.002518 Jy/beam ! Clean residual mean=0.000007 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.119516 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 50 components and 0.119516 Jy ! Inverting map ! Added new window around map position (0.6, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293891 Jy ! Component: 100 - total flux cleaned = 0.00517998 Jy ! Component: 150 - total flux cleaned = 0.00696099 Jy ! Component: 200 - total flux cleaned = 0.00839054 Jy ! Total flux subtracted in 200 components = 0.00839054 Jy ! Clean residual min=-0.001245 max=0.001155 Jy/beam ! Clean residual mean=0.000003 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.127906 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 74 components and 0.127906 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.241 mas, bmaj=3.991 mas, bpa=3.51 degrees ! Estimated noise=462.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181652 Jy ! Component: 100 - total flux cleaned = 0.00295714 Jy ! Component: 150 - total flux cleaned = 0.00371118 Jy ! Component: 200 - total flux cleaned = 0.00397703 Jy ! Total flux subtracted in 200 components = 0.00397703 Jy ! Clean residual min=-0.000984 max=0.001347 Jy/beam ! Clean residual mean=0.000003 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.131883 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161888 Jy ! Component: 100 - total flux cleaned = 0.000283669 Jy ! Component: 150 - total flux cleaned = 0.000388598 Jy ! Component: 200 - total flux cleaned = 0.000489648 Jy ! Total flux subtracted in 200 components = 0.000489648 Jy ! Clean residual min=-0.000968 max=0.001363 Jy/beam ! Clean residual mean=0.000002 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.132373 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 126 components and 0.132373 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8488 mas, bmaj=2.067 mas, bpa=1.579 degrees ! Estimated noise=371.444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106076 Jy ! Component: 100 - total flux cleaned = 0.000106898 Jy ! Component: 150 - total flux cleaned = 6.36302e-05 Jy ! Component: 200 - total flux cleaned = 8.22759e-05 Jy ! Total flux subtracted in 200 components = 8.22759e-05 Jy ! Clean residual min=-0.001100 max=0.001087 Jy/beam ! Clean residual mean=0.000001 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.132455 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 143 components and 0.132455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095398Jy sigma=0.000642 ! Fit after self-cal, rms=0.095407Jy sigma=0.000642 wmodel J0611-1155_X_2017_05_01_pus_map.mod ! Writing 143 model components to file: J0611-1155_X_2017_05_01_pus_map.mod wobs J0611-1155_X_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0611-1155_X_2017_05_01_pus_uvs.fits wwins J0611-1155_X_2017_05_01_pus_map.win ! wwins: Wrote 5 windows to J0611-1155_X_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287542 Jy ! Component: 100 - total flux cleaned = 0.000389026 Jy ! Component: 150 - total flux cleaned = 0.000420936 Jy ! Component: 200 - total flux cleaned = 0.000481351 Jy ! Component: 250 - total flux cleaned = 0.000481271 Jy ! Component: 300 - total flux cleaned = 0.000524212 Jy ! Component: 350 - total flux cleaned = 0.0006208 Jy ! Component: 400 - total flux cleaned = 0.000687954 Jy ! Component: 450 - total flux cleaned = 0.000779658 Jy ! Component: 500 - total flux cleaned = 0.000856204 Jy ! Component: 550 - total flux cleaned = 0.000930972 Jy ! Component: 600 - total flux cleaned = 0.00100404 Jy ! Component: 650 - total flux cleaned = 0.00109928 Jy ! Component: 700 - total flux cleaned = 0.00119216 Jy ! Component: 750 - total flux cleaned = 0.00122627 Jy ! Component: 800 - total flux cleaned = 0.00129345 Jy ! Component: 850 - total flux cleaned = 0.00134835 Jy ! Component: 900 - total flux cleaned = 0.00140224 Jy ! Component: 950 - total flux cleaned = 0.00148676 Jy ! Component: 1000 - total flux cleaned = 0.00153832 Jy ! Component: 1050 - total flux cleaned = 0.00158914 Jy ! Component: 1100 - total flux cleaned = 0.00162908 Jy ! Component: 1150 - total flux cleaned = 0.00166868 Jy ! Component: 1200 - total flux cleaned = 0.00173655 Jy ! Component: 1250 - total flux cleaned = 0.00178413 Jy ! Component: 1300 - total flux cleaned = 0.00179359 Jy ! Component: 1350 - total flux cleaned = 0.00182157 Jy ! Component: 1400 - total flux cleaned = 0.00185804 Jy ! Component: 1450 - total flux cleaned = 0.001876 Jy ! Component: 1500 - total flux cleaned = 0.00190268 Jy ! Component: 1550 - total flux cleaned = 0.00192907 Jy ! Component: 1600 - total flux cleaned = 0.00193778 Jy ! Component: 1650 - total flux cleaned = 0.00198065 Jy ! Component: 1700 - total flux cleaned = 0.00200611 Jy ! Component: 1750 - total flux cleaned = 0.00199767 Jy ! Component: 1800 - total flux cleaned = 0.00203098 Jy ! Component: 1850 - total flux cleaned = 0.00207187 Jy ! Component: 1900 - total flux cleaned = 0.00209618 Jy ! Component: 1950 - total flux cleaned = 0.00209632 Jy ! Component: 2000 - total flux cleaned = 0.00214391 Jy ! Total flux subtracted in 2048 components = 0.0021753 Jy ! Clean residual min=-0.000457 max=0.000403 Jy/beam ! Clean residual mean=0.000000 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.134631 Jy keep ! Adding 153 model components to the UV plane model. ! The established model now contains 296 components and 0.134631 Jy ![Exited script file: muppet] wmap "J0611-1155_X_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8488 x 2.067 at 1.579 degrees (North through East) ! Clean map min=-0.00070105 max=0.071817 Jy/beam ! Writing clean map to FITS file: J0611-1155_X_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0718169 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000150114 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.627069 0.627069 1.25414 2.50828 5.01655 10.0331 20.0662 40.1324 80.2648 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8488 x 2.067 at 1.579 degrees (North through East) ! Clean map min=-0.00070105 max=0.071817 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0611-1155_X_2017_05_01_pus_uvs.log closed on Wed May 1 19:53:06 2019