! Started logfile: J0611+0413_S_2017_01_21_pus_uvs.log on Sun May 5 15:47:16 2019 obs J0611+0413_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0611+0413_S_2017_01_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.829678 visibilities/baseline/integration-bin. ! Found source: J0611+0413 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 13620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0611+0413_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 328 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.965389Jy sigma=0.007575 ! Fit after self-cal, rms=0.936655Jy sigma=0.007396 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.583 mas, bmaj=6.544 mas, bpa=-5.257 degrees ! Estimated noise=1101.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.052583 Jy ! Component: 100 - total flux cleaned = 0.0651359 Jy ! Total flux subtracted in 100 components = 0.0651359 Jy ! Clean residual min=-0.004692 max=0.005075 Jy/beam ! Clean residual mean=0.000001 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.0651359 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0651359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094801Jy sigma=0.000679 ! Fit after self-cal, rms=0.094620Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=7.304 mas, bpa=-3.391 degrees ! Estimated noise=835.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00602685 Jy ! Component: 100 - total flux cleaned = 0.00876435 Jy ! Component: 150 - total flux cleaned = 0.0102137 Jy ! Component: 200 - total flux cleaned = 0.0104801 Jy ! Total flux subtracted in 200 components = 0.0104801 Jy ! Clean residual min=-0.003912 max=0.004465 Jy/beam ! Clean residual mean=0.000004 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.075616 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 30 components and 0.075616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094291Jy sigma=0.000675 ! Fit after self-cal, rms=0.094334Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.97 HN 1.02 LA 1.02 ! MK 0.81 NL 1.09 OV 0.87 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 1.03 LA 1.02 ! MK 1.02 NL 1.00 OV 1.10 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.02 HN 1.05 LA 0.96 ! MK 1.13 NL 1.07 OV 0.93 PT 0.96 ! SC 0.94 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.09 HN 0.94 LA 0.94 ! MK 1.03 NL 1.00* OV 0.95 PT 0.98 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.094334Jy sigma=0.000675 ! Fit after self-cal, rms=0.095268Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=7.346 mas, bpa=-3.508 degrees ! Estimated noise=838.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115152 Jy ! Component: 100 - total flux cleaned = 0.00125106 Jy ! Component: 150 - total flux cleaned = 0.00122205 Jy ! Component: 200 - total flux cleaned = 0.0011952 Jy ! Total flux subtracted in 200 components = 0.0011952 Jy ! Clean residual min=-0.003491 max=0.004299 Jy/beam ! Clean residual mean=0.000005 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.0768112 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0768112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095247Jy sigma=0.000673 ! Fit after self-cal, rms=0.095381Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095381Jy sigma=0.000672 ! Fit after self-cal, rms=0.099866Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.337 mas, bpa=-3.804 degrees ! Estimated noise=860.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215825 Jy ! Component: 100 - total flux cleaned = 0.00314428 Jy ! Component: 150 - total flux cleaned = 0.00334717 Jy ! Component: 200 - total flux cleaned = 0.00339549 Jy ! Total flux subtracted in 200 components = 0.00339549 Jy ! Clean residual min=-0.003091 max=0.005425 Jy/beam ! Clean residual mean=0.000015 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.0802067 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.0802067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099789Jy sigma=0.000667 ! Fit after self-cal, rms=0.100147Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (29.5, -48.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456024 Jy ! Component: 100 - total flux cleaned = 0.00609895 Jy ! Component: 150 - total flux cleaned = 0.007036 Jy ! Component: 200 - total flux cleaned = 0.00780349 Jy ! Total flux subtracted in 200 components = 0.00780349 Jy ! Clean residual min=-0.002843 max=0.003515 Jy/beam ! Clean residual mean=0.000011 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.0880102 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and 0.0880102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099947Jy sigma=0.000662 ! Fit after self-cal, rms=0.099821Jy sigma=0.000662 ! Inverting map ! Added new window around map position (96.5, -126). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245071 Jy ! Component: 100 - total flux cleaned = 0.00309462 Jy ! Component: 150 - total flux cleaned = 0.00349995 Jy ! Component: 200 - total flux cleaned = 0.00373736 Jy ! Total flux subtracted in 200 components = 0.00373736 Jy ! Clean residual min=-0.002757 max=0.003231 Jy/beam ! Clean residual mean=0.000007 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.0917475 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 86 components and 0.0917475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099703Jy sigma=0.000660 ! Fit after self-cal, rms=0.099628Jy sigma=0.000660 ! Inverting map ! Added new window around map position (5.5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272309 Jy ! Component: 100 - total flux cleaned = 0.00280503 Jy ! Component: 150 - total flux cleaned = 0.00275358 Jy ! Component: 200 - total flux cleaned = 0.00284357 Jy ! Total flux subtracted in 200 components = 0.00284357 Jy ! Clean residual min=-0.002479 max=0.002823 Jy/beam ! Clean residual mean=0.000008 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.0945911 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 106 components and 0.0945911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099522Jy sigma=0.000659 ! Fit after self-cal, rms=0.099476Jy sigma=0.000659 ! Inverting map ! Added new window around map position (97, 57). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186827 Jy ! Component: 100 - total flux cleaned = 0.00243737 Jy ! Component: 150 - total flux cleaned = 0.00281334 Jy ! Component: 200 - total flux cleaned = 0.00309111 Jy ! Total flux subtracted in 200 components = 0.00309111 Jy ! Clean residual min=-0.002454 max=0.002536 Jy/beam ! Clean residual mean=0.000004 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.0976822 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 120 components and 0.0976822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099395Jy sigma=0.000658 ! Fit after self-cal, rms=0.099360Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099360Jy sigma=0.000657 ! Fit after self-cal, rms=0.098047Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=7.305 mas, bpa=-4.078 degrees ! Estimated noise=855.169 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219024 Jy ! Component: 100 - total flux cleaned = 0.00354662 Jy ! Component: 150 - total flux cleaned = 0.00436139 Jy ! Component: 200 - total flux cleaned = 0.00496659 Jy ! Total flux subtracted in 200 components = 0.00496659 Jy ! Clean residual min=-0.002210 max=0.002579 Jy/beam ! Clean residual mean=0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.102649 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 136 components and 0.102649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097992Jy sigma=0.000655 ! Fit after self-cal, rms=0.097980Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-39, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157902 Jy ! Component: 100 - total flux cleaned = 0.00195973 Jy ! Component: 150 - total flux cleaned = 0.00233686 Jy ! Component: 200 - total flux cleaned = 0.00267453 Jy ! Total flux subtracted in 200 components = 0.00267453 Jy ! Clean residual min=-0.002193 max=0.002270 Jy/beam ! Clean residual mean=0.000002 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.105323 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 157 components and 0.105323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097919Jy sigma=0.000654 ! Fit after self-cal, rms=0.097903Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097903Jy sigma=0.000654 ! Fit after self-cal, rms=0.097634Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.808 mas, bmaj=11.6 mas, bpa=1.069 degrees ! Estimated noise=1125.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014008 Jy ! Component: 100 - total flux cleaned = 0.00195159 Jy ! Component: 150 - total flux cleaned = 0.00242282 Jy ! Component: 200 - total flux cleaned = 0.00277038 Jy ! Total flux subtracted in 200 components = 0.00277038 Jy ! Clean residual min=-0.002511 max=0.002471 Jy/beam ! Clean residual mean=0.000001 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.108094 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 179 components and 0.108094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097616Jy sigma=0.000654 ! Fit after self-cal, rms=0.097606Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382971 Jy ! Component: 100 - total flux cleaned = 0.000623615 Jy ! Component: 150 - total flux cleaned = 0.000705707 Jy ! Component: 200 - total flux cleaned = 0.000805751 Jy ! Total flux subtracted in 200 components = 0.000805751 Jy ! Clean residual min=-0.002543 max=0.002538 Jy/beam ! Clean residual mean=-0.000000 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.108899 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 189 components and 0.108899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097598Jy sigma=0.000653 ! Fit after self-cal, rms=0.097582Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=7.291 mas, bpa=-4.09 degrees ! Estimated noise=854.951 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.97 x 7.291 at -4.09 degrees (North through East) ! Clean map min=-0.0023675 max=0.067982 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.522 mas, bmaj=6.597 mas, bpa=-5.711 degrees ! Estimated noise=1100.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.052016 Jy ! Component: 100 - total flux cleaned = 0.0661467 Jy ! Component: 150 - total flux cleaned = 0.0751146 Jy ! Component: 200 - total flux cleaned = 0.0818556 Jy ! Total flux subtracted in 200 components = 0.0818556 Jy ! Clean residual min=-0.004637 max=0.005015 Jy/beam ! Clean residual mean=0.000001 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.0818555 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0818555 Jy ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=7.291 mas, bpa=-4.09 degrees ! Estimated noise=854.951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00629589 Jy ! Component: 100 - total flux cleaned = 0.0108315 Jy ! Component: 150 - total flux cleaned = 0.0141431 Jy ! Component: 200 - total flux cleaned = 0.0165857 Jy ! Total flux subtracted in 200 components = 0.0165857 Jy ! Clean residual min=-0.002944 max=0.002949 Jy/beam ! Clean residual mean=-0.000000 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0984413 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 51 components and 0.0984413 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.808 mas, bmaj=11.6 mas, bpa=1.069 degrees ! Estimated noise=1125.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383125 Jy ! Component: 100 - total flux cleaned = 0.00600717 Jy ! Component: 150 - total flux cleaned = 0.00713585 Jy ! Component: 200 - total flux cleaned = 0.00765308 Jy ! Total flux subtracted in 200 components = 0.00765308 Jy ! Clean residual min=-0.002785 max=0.002632 Jy/beam ! Clean residual mean=0.000001 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.106094 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404232 Jy ! Component: 100 - total flux cleaned = 0.000821799 Jy ! Component: 150 - total flux cleaned = 0.00106255 Jy ! Component: 200 - total flux cleaned = 0.00141886 Jy ! Total flux subtracted in 200 components = 0.00141886 Jy ! Clean residual min=-0.002682 max=0.002592 Jy/beam ! Clean residual mean=-0.000000 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.107513 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 135 components and 0.107513 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=7.291 mas, bpa=-4.09 degrees ! Estimated noise=854.951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000646538 Jy ! Component: 100 - total flux cleaned = 0.00102923 Jy ! Component: 150 - total flux cleaned = 0.00122776 Jy ! Component: 200 - total flux cleaned = 0.00153252 Jy ! Total flux subtracted in 200 components = 0.00153252 Jy ! Clean residual min=-0.002287 max=0.002304 Jy/beam ! Clean residual mean=0.000000 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.109046 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 155 components and 0.109046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097653Jy sigma=0.000654 ! Fit after self-cal, rms=0.097634Jy sigma=0.000654 wmodel J0611+0413_S_2017_01_21_pus_map.mod ! Writing 155 model components to file: J0611+0413_S_2017_01_21_pus_map.mod wobs J0611+0413_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0611+0413_S_2017_01_21_pus_uvs.fits wwins J0611+0413_S_2017_01_21_pus_map.win ! wwins: Wrote 6 windows to J0611+0413_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000204083 Jy ! Component: 100 - total flux cleaned = -0.00043904 Jy ! Component: 150 - total flux cleaned = -0.000476324 Jy ! Component: 200 - total flux cleaned = -0.000440301 Jy ! Component: 250 - total flux cleaned = -0.000439347 Jy ! Component: 300 - total flux cleaned = -0.000337362 Jy ! Component: 350 - total flux cleaned = -0.000271214 Jy ! Component: 400 - total flux cleaned = -0.000207206 Jy ! Component: 450 - total flux cleaned = -0.000238406 Jy ! Component: 500 - total flux cleaned = -0.000238336 Jy ! Component: 550 - total flux cleaned = -0.000208807 Jy ! Component: 600 - total flux cleaned = -0.000297292 Jy ! Component: 650 - total flux cleaned = -0.000268742 Jy ! Component: 700 - total flux cleaned = -0.000269296 Jy ! Component: 750 - total flux cleaned = -0.000297627 Jy ! Component: 800 - total flux cleaned = -0.000297597 Jy ! Component: 850 - total flux cleaned = -0.000243503 Jy ! Component: 900 - total flux cleaned = -0.000216578 Jy ! Component: 950 - total flux cleaned = -0.000269067 Jy ! Component: 1000 - total flux cleaned = -0.00024342 Jy ! Component: 1050 - total flux cleaned = -0.000293717 Jy ! Component: 1100 - total flux cleaned = -0.000294467 Jy ! Component: 1150 - total flux cleaned = -0.000393076 Jy ! Component: 1200 - total flux cleaned = -0.000417029 Jy ! Component: 1250 - total flux cleaned = -0.000512924 Jy ! Component: 1300 - total flux cleaned = -0.000465625 Jy ! Component: 1350 - total flux cleaned = -0.000488858 Jy ! Component: 1400 - total flux cleaned = -0.000465185 Jy ! Component: 1450 - total flux cleaned = -0.000533743 Jy ! Component: 1500 - total flux cleaned = -0.000511061 Jy ! Component: 1550 - total flux cleaned = -0.000533027 Jy ! Component: 1600 - total flux cleaned = -0.00051109 Jy ! Component: 1650 - total flux cleaned = -0.000554688 Jy ! Component: 1700 - total flux cleaned = -0.000533077 Jy ! Component: 1750 - total flux cleaned = -0.000533477 Jy ! Component: 1800 - total flux cleaned = -0.00059712 Jy ! Component: 1850 - total flux cleaned = -0.00055499 Jy ! Component: 1900 - total flux cleaned = -0.000700542 Jy ! Component: 1950 - total flux cleaned = -0.00065883 Jy ! Component: 2000 - total flux cleaned = -0.000740223 Jy ! Component: 2050 - total flux cleaned = -0.000780586 Jy ! Component: 2100 - total flux cleaned = -0.000780253 Jy ! Component: 2150 - total flux cleaned = -0.000760643 Jy ! Component: 2200 - total flux cleaned = -0.000839241 Jy ! Component: 2250 - total flux cleaned = -0.0008197 Jy ! Component: 2300 - total flux cleaned = -0.000819878 Jy ! Component: 2350 - total flux cleaned = -0.000839251 Jy ! Component: 2400 - total flux cleaned = -0.000801355 Jy ! Component: 2450 - total flux cleaned = -0.000914123 Jy ! Component: 2500 - total flux cleaned = -0.000932566 Jy ! Component: 2550 - total flux cleaned = -0.000969572 Jy ! Component: 2600 - total flux cleaned = -0.000951165 Jy ! Component: 2650 - total flux cleaned = -0.000951432 Jy ! Component: 2700 - total flux cleaned = -0.000969566 Jy ! Component: 2750 - total flux cleaned = -0.00104122 Jy ! Component: 2800 - total flux cleaned = -0.00105892 Jy ! Component: 2850 - total flux cleaned = -0.00100625 Jy ! Component: 2900 - total flux cleaned = -0.00104101 Jy ! Component: 2950 - total flux cleaned = -0.00102392 Jy ! Component: 3000 - total flux cleaned = -0.00107545 Jy ! Component: 3050 - total flux cleaned = -0.00117748 Jy ! Component: 3100 - total flux cleaned = -0.00117748 Jy ! Component: 3150 - total flux cleaned = -0.00122786 Jy ! Component: 3200 - total flux cleaned = -0.0012113 Jy ! Component: 3250 - total flux cleaned = -0.00131051 Jy ! Component: 3300 - total flux cleaned = -0.00135958 Jy ! Component: 3350 - total flux cleaned = -0.00142461 Jy ! Component: 3400 - total flux cleaned = -0.00142477 Jy ! Component: 3450 - total flux cleaned = -0.00145678 Jy ! Component: 3500 - total flux cleaned = -0.0014728 Jy ! Component: 3550 - total flux cleaned = -0.00147275 Jy ! Component: 3600 - total flux cleaned = -0.00150423 Jy ! Component: 3650 - total flux cleaned = -0.00153533 Jy ! Component: 3700 - total flux cleaned = -0.00155109 Jy ! Component: 3750 - total flux cleaned = -0.00162796 Jy ! Component: 3800 - total flux cleaned = -0.00164322 Jy ! Component: 3850 - total flux cleaned = -0.00162814 Jy ! Component: 3900 - total flux cleaned = -0.0016883 Jy ! Component: 3950 - total flux cleaned = -0.00165832 Jy ! Component: 4000 - total flux cleaned = -0.00170301 Jy ! Component: 4050 - total flux cleaned = -0.00170303 Jy ! Total flux subtracted in 4096 components = -0.00171761 Jy ! Clean residual min=-0.000882 max=0.000802 Jy/beam ! Clean residual mean=-0.000002 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.107328 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 444 components and 0.107328 Jy ![Exited script file: muppet] wmap "J0611+0413_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.97 x 7.291 at -4.09 degrees (North through East) ! Clean map min=-0.0016963 max=0.067959 Jy/beam ! Writing clean map to FITS file: J0611+0413_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0679592 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000258316 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14032 1.14032 2.28063 4.56126 9.12252 18.245 36.4901 72.9802 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.97 x 7.291 at -4.09 degrees (North through East) ! Clean map min=-0.0016963 max=0.067959 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0611+0413_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:47:21 2019