! Started logfile: J0608-2717_S_2017_07_16_pus_uvs.log on Thu May 9 11:02:46 2019 obs J0608-2717_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0608-2717_S_2017_07_16_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.558772 visibilities/baseline/integration-bin. ! Found source: J0608-2717 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 7644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0608-2717_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 613 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973356Jy sigma=0.006381 ! Fit after self-cal, rms=0.919997Jy sigma=0.006082 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.358 mas, bmaj=6.797 mas, bpa=-9.201 degrees ! Estimated noise=2147.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633907 Jy ! Component: 100 - total flux cleaned = 0.0798988 Jy ! Total flux subtracted in 100 components = 0.0798988 Jy ! Clean residual min=-0.007560 max=0.008568 Jy/beam ! Clean residual mean=-0.000010 rms=0.001971 Jy/beam ! Combined flux in latest and established models = 0.0798988 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0798988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106112Jy sigma=0.000654 ! Fit after self-cal, rms=0.105967Jy sigma=0.000653 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.781 mas, bmaj=7.455 mas, bpa=-8.45 degrees ! Estimated noise=1464.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117642 Jy ! Component: 100 - total flux cleaned = 0.0178689 Jy ! Component: 150 - total flux cleaned = 0.0215177 Jy ! Component: 200 - total flux cleaned = 0.0237514 Jy ! Total flux subtracted in 200 components = 0.0237514 Jy ! Clean residual min=-0.004718 max=0.005453 Jy/beam ! Clean residual mean=-0.000024 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.10365 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 44 components and 0.10365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104822Jy sigma=0.000643 ! Fit after self-cal, rms=0.104826Jy sigma=0.000643 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.20 KP 1.02 ! LA 0.95 MK 0.97 NL 0.89 OV 1.07 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.23 KP 0.94 ! LA 0.95 MK 1.07 NL 1.04 OV 1.05 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.19 KP 0.94 ! LA 0.95 MK 1.03 NL 1.05 OV 1.03 ! PT 0.92 SC 1.05 ! ! ! Correcting IF 4. ! A total of 147 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.104826Jy sigma=0.000643 ! Fit after self-cal, rms=0.110585Jy sigma=0.000644 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=7.526 mas, bpa=-7.337 degrees ! Estimated noise=1482.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.75275e-05 Jy ! Component: 100 - total flux cleaned = -1.33011e-05 Jy ! Component: 150 - total flux cleaned = -4.28468e-05 Jy ! Component: 200 - total flux cleaned = -7.11454e-05 Jy ! Total flux subtracted in 200 components = -7.11454e-05 Jy ! Clean residual min=-0.004039 max=0.004539 Jy/beam ! Clean residual mean=-0.000009 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.103579 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.103579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110569Jy sigma=0.000644 ! Fit after self-cal, rms=0.110794Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110794Jy sigma=0.000643 ! Fit after self-cal, rms=0.111548Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=7.473 mas, bpa=-7.043 degrees ! Estimated noise=1480.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513292 Jy ! Component: 100 - total flux cleaned = 0.000486701 Jy ! Component: 150 - total flux cleaned = 0.000487207 Jy ! Component: 200 - total flux cleaned = 0.000463418 Jy ! Total flux subtracted in 200 components = 0.000463418 Jy ! Clean residual min=-0.003582 max=0.004149 Jy/beam ! Clean residual mean=-0.000017 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.104042 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.104042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111537Jy sigma=0.000642 ! Fit after self-cal, rms=0.111580Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-34, 120.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289142 Jy ! Component: 100 - total flux cleaned = 0.00288641 Jy ! Component: 150 - total flux cleaned = 0.00288204 Jy ! Component: 200 - total flux cleaned = 0.00288521 Jy ! Total flux subtracted in 200 components = 0.00288521 Jy ! Clean residual min=-0.003685 max=0.003315 Jy/beam ! Clean residual mean=-0.000010 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.106928 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.106928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111413Jy sigma=0.000641 ! Fit after self-cal, rms=0.111356Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111356Jy sigma=0.000641 ! Fit after self-cal, rms=0.110489Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=7.433 mas, bpa=-6.904 degrees ! Estimated noise=1464.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000871822 Jy ! Component: 100 - total flux cleaned = 0.000935127 Jy ! Component: 150 - total flux cleaned = 0.000881711 Jy ! Component: 200 - total flux cleaned = 0.000928281 Jy ! Total flux subtracted in 200 components = 0.000928281 Jy ! Clean residual min=-0.003539 max=0.003328 Jy/beam ! Clean residual mean=-0.000009 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.107856 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.107856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110411Jy sigma=0.000640 ! Fit after self-cal, rms=0.110413Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015706 Jy ! Component: 100 - total flux cleaned = 0.000155544 Jy ! Component: 150 - total flux cleaned = 0.000196647 Jy ! Component: 200 - total flux cleaned = 0.00019735 Jy ! Total flux subtracted in 200 components = 0.00019735 Jy ! Clean residual min=-0.003525 max=0.003325 Jy/beam ! Clean residual mean=-0.000009 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.108053 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.108053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110365Jy sigma=0.000640 ! Fit after self-cal, rms=0.110354Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110354Jy sigma=0.000640 ! Fit after self-cal, rms=0.110261Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.352 mas, bmaj=18.44 mas, bpa=-7.074 degrees ! Estimated noise=1915 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187535 Jy ! Component: 100 - total flux cleaned = 0.000153846 Jy ! Component: 150 - total flux cleaned = 9.31701e-05 Jy ! Component: 200 - total flux cleaned = 3.98527e-05 Jy ! Total flux subtracted in 200 components = 3.98527e-05 Jy ! Clean residual min=-0.003547 max=0.002941 Jy/beam ! Clean residual mean=-0.000017 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.108093 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 91 components and 0.108093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110259Jy sigma=0.000640 ! Fit after self-cal, rms=0.110260Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.32352e-05 Jy ! Component: 100 - total flux cleaned = -9.03651e-05 Jy ! Component: 150 - total flux cleaned = -0.000138769 Jy ! Component: 200 - total flux cleaned = -0.000159972 Jy ! Total flux subtracted in 200 components = -0.000159972 Jy ! Clean residual min=-0.003564 max=0.002937 Jy/beam ! Clean residual mean=-0.000018 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.107933 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 93 components and 0.107933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110262Jy sigma=0.000640 ! Fit after self-cal, rms=0.110259Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=7.423 mas, bpa=-6.939 degrees ! Estimated noise=1461.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.831 x 7.423 at -6.939 degrees (North through East) ! Clean map min=-0.0038157 max=0.081385 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.363 mas, bmaj=6.725 mas, bpa=-7.55 degrees ! Estimated noise=2068.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0620047 Jy ! Component: 100 - total flux cleaned = 0.0794695 Jy ! Component: 150 - total flux cleaned = 0.0884871 Jy ! Component: 200 - total flux cleaned = 0.0919159 Jy ! Total flux subtracted in 200 components = 0.0919159 Jy ! Clean residual min=-0.006050 max=0.006408 Jy/beam ! Clean residual mean=-0.000007 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.0919159 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.0919159 Jy ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=7.423 mas, bpa=-6.939 degrees ! Estimated noise=1461.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0071782 Jy ! Component: 100 - total flux cleaned = 0.0111481 Jy ! Component: 150 - total flux cleaned = 0.0126301 Jy ! Component: 200 - total flux cleaned = 0.0133367 Jy ! Total flux subtracted in 200 components = 0.0133367 Jy ! Clean residual min=-0.003762 max=0.003250 Jy/beam ! Clean residual mean=-0.000013 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.105253 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 61 components and 0.105253 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.352 mas, bmaj=18.44 mas, bpa=-7.074 degrees ! Estimated noise=1915 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179798 Jy ! Component: 100 - total flux cleaned = 0.00200553 Jy ! Component: 150 - total flux cleaned = 0.00212658 Jy ! Component: 200 - total flux cleaned = 0.00216145 Jy ! Total flux subtracted in 200 components = 0.00216145 Jy ! Clean residual min=-0.003495 max=0.003050 Jy/beam ! Clean residual mean=-0.000022 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.107414 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.18581e-07 Jy ! Component: 100 - total flux cleaned = 2.81555e-05 Jy ! Component: 150 - total flux cleaned = 5.41234e-05 Jy ! Component: 200 - total flux cleaned = 5.42544e-05 Jy ! Total flux subtracted in 200 components = 5.42544e-05 Jy ! Clean residual min=-0.003521 max=0.003044 Jy/beam ! Clean residual mean=-0.000021 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.107468 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 86 components and 0.107468 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=7.423 mas, bpa=-6.939 degrees ! Estimated noise=1461.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224443 Jy ! Component: 100 - total flux cleaned = 0.000282712 Jy ! Component: 150 - total flux cleaned = 0.000384623 Jy ! Component: 200 - total flux cleaned = 0.000382948 Jy ! Total flux subtracted in 200 components = 0.000382948 Jy ! Clean residual min=-0.003515 max=0.003081 Jy/beam ! Clean residual mean=-0.000008 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.107851 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 0.107851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110221Jy sigma=0.000640 ! Fit after self-cal, rms=0.110161Jy sigma=0.000640 wmodel J0608-2717_S_2017_07_16_pus_map.mod ! Writing 105 model components to file: J0608-2717_S_2017_07_16_pus_map.mod wobs J0608-2717_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0608-2717_S_2017_07_16_pus_uvs.fits wwins J0608-2717_S_2017_07_16_pus_map.win ! wwins: Wrote 3 windows to J0608-2717_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000707461 Jy ! Component: 100 - total flux cleaned = -0.00109425 Jy ! Component: 150 - total flux cleaned = -0.00130023 Jy ! Component: 200 - total flux cleaned = -0.00139731 Jy ! Component: 250 - total flux cleaned = -0.00158217 Jy ! Component: 300 - total flux cleaned = -0.00167153 Jy ! Component: 350 - total flux cleaned = -0.00184378 Jy ! Component: 400 - total flux cleaned = -0.00192705 Jy ! Component: 450 - total flux cleaned = -0.00217005 Jy ! Component: 500 - total flux cleaned = -0.00228863 Jy ! Component: 550 - total flux cleaned = -0.00244246 Jy ! Component: 600 - total flux cleaned = -0.00251763 Jy ! Component: 650 - total flux cleaned = -0.00262689 Jy ! Component: 700 - total flux cleaned = -0.0026622 Jy ! Component: 750 - total flux cleaned = -0.00269736 Jy ! Component: 800 - total flux cleaned = -0.00269745 Jy ! Component: 850 - total flux cleaned = -0.00266452 Jy ! Component: 900 - total flux cleaned = -0.00276318 Jy ! Component: 950 - total flux cleaned = -0.00273041 Jy ! Component: 1000 - total flux cleaned = -0.00263567 Jy ! Component: 1050 - total flux cleaned = -0.00248114 Jy ! Component: 1100 - total flux cleaned = -0.00245081 Jy ! Component: 1150 - total flux cleaned = -0.00242159 Jy ! Component: 1200 - total flux cleaned = -0.00245071 Jy ! Component: 1250 - total flux cleaned = -0.00242188 Jy ! Component: 1300 - total flux cleaned = -0.00236522 Jy ! Component: 1350 - total flux cleaned = -0.00228188 Jy ! Component: 1400 - total flux cleaned = -0.0023091 Jy ! Component: 1450 - total flux cleaned = -0.00225463 Jy ! Component: 1500 - total flux cleaned = -0.00222817 Jy ! Component: 1550 - total flux cleaned = -0.00214937 Jy ! Component: 1600 - total flux cleaned = -0.00222676 Jy ! Component: 1650 - total flux cleaned = -0.00212458 Jy ! Component: 1700 - total flux cleaned = -0.00209925 Jy ! Component: 1750 - total flux cleaned = -0.00207417 Jy ! Component: 1800 - total flux cleaned = -0.00202505 Jy ! Component: 1850 - total flux cleaned = -0.00195278 Jy ! Component: 1900 - total flux cleaned = -0.00190516 Jy ! Component: 1950 - total flux cleaned = -0.00192918 Jy ! Component: 2000 - total flux cleaned = -0.00202286 Jy ! Component: 2050 - total flux cleaned = -0.00199963 Jy ! Component: 2100 - total flux cleaned = -0.00202213 Jy ! Component: 2150 - total flux cleaned = -0.00202184 Jy ! Component: 2200 - total flux cleaned = -0.00204425 Jy ! Component: 2250 - total flux cleaned = -0.00204424 Jy ! Component: 2300 - total flux cleaned = -0.00197872 Jy ! Component: 2350 - total flux cleaned = -0.00206551 Jy ! Component: 2400 - total flux cleaned = -0.00206559 Jy ! Component: 2450 - total flux cleaned = -0.00208714 Jy ! Component: 2500 - total flux cleaned = -0.00206611 Jy ! Component: 2550 - total flux cleaned = -0.00202456 Jy ! Component: 2600 - total flux cleaned = -0.00200421 Jy ! Component: 2650 - total flux cleaned = -0.0020041 Jy ! Component: 2700 - total flux cleaned = -0.00194395 Jy ! Component: 2750 - total flux cleaned = -0.00188426 Jy ! Component: 2800 - total flux cleaned = -0.00190408 Jy ! Component: 2850 - total flux cleaned = -0.00186482 Jy ! Component: 2900 - total flux cleaned = -0.00184547 Jy ! Component: 2950 - total flux cleaned = -0.00180709 Jy ! Component: 3000 - total flux cleaned = -0.00178796 Jy ! Component: 3050 - total flux cleaned = -0.00175012 Jy ! Component: 3100 - total flux cleaned = -0.00169412 Jy ! Component: 3150 - total flux cleaned = -0.00169404 Jy ! Component: 3200 - total flux cleaned = -0.00165722 Jy ! Component: 3250 - total flux cleaned = -0.00160241 Jy ! Component: 3300 - total flux cleaned = -0.00160256 Jy ! Component: 3350 - total flux cleaned = -0.00160269 Jy ! Component: 3400 - total flux cleaned = -0.00156683 Jy ! Component: 3450 - total flux cleaned = -0.00149596 Jy ! Component: 3500 - total flux cleaned = -0.00146085 Jy ! Component: 3550 - total flux cleaned = -0.0014607 Jy ! Component: 3600 - total flux cleaned = -0.00139127 Jy ! Component: 3650 - total flux cleaned = -0.00142573 Jy ! Component: 3700 - total flux cleaned = -0.00135717 Jy ! Component: 3750 - total flux cleaned = -0.00132313 Jy ! Component: 3800 - total flux cleaned = -0.00122185 Jy ! Component: 3850 - total flux cleaned = -0.00113813 Jy ! Component: 3900 - total flux cleaned = -0.0011381 Jy ! Component: 3950 - total flux cleaned = -0.00105553 Jy ! Component: 4000 - total flux cleaned = -0.00102267 Jy ! Component: 4050 - total flux cleaned = -0.000957497 Jy ! Total flux subtracted in 4096 components = -0.000941458 Jy ! Clean residual min=-0.001336 max=0.001023 Jy/beam ! Clean residual mean=-0.000005 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.10691 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 362 components and 0.10691 Jy ![Exited script file: muppet] wmap "J0608-2717_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.831 x 7.423 at -6.939 degrees (North through East) ! Clean map min=-0.0031867 max=0.082535 Jy/beam ! Writing clean map to FITS file: J0608-2717_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0825348 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000277513 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00871 1.00871 2.01742 4.03485 8.06969 16.1394 32.2788 64.5576 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.831 x 7.423 at -6.939 degrees (North through East) ! Clean map min=-0.0031867 max=0.082535 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0608-2717_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:02:51 2019