! Started logfile: J0608-1520_S_2017_04_28_pus_uvs.log on Thu May 2 16:18:28 2019 obs J0608-1520_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0608-1520_S_2017_04_28_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.965926 visibilities/baseline/integration-bin. ! Found source: J0608-1520 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13040 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0608-1520_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 329 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.678455Jy sigma=0.199019 ! Fit after self-cal, rms=0.668664Jy sigma=0.199002 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=9.188 mas, bpa=-9.34 degrees ! Estimated noise=542.501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0858617 Jy ! Component: 100 - total flux cleaned = 0.0804015 Jy ! Total flux subtracted in 100 components = 0.0804015 Jy ! Clean residual min=-0.054929 max=0.057422 Jy/beam ! Clean residual mean=0.000243 rms=0.016807 Jy/beam ! Combined flux in latest and established models = 0.0804015 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0804015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292147Jy sigma=0.016589 ! Fit after self-cal, rms=0.292142Jy sigma=0.016578 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.737 mas, bmaj=10.84 mas, bpa=-5.782 degrees ! Estimated noise=290.939 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0028813 Jy ! Component: 100 - total flux cleaned = 0.00256134 Jy ! Component: 150 - total flux cleaned = 0.006308 Jy ! Component: 200 - total flux cleaned = 0.00790068 Jy ! Total flux subtracted in 200 components = 0.00790068 Jy ! Clean residual min=-0.051642 max=0.051945 Jy/beam ! Clean residual mean=0.000009 rms=0.019409 Jy/beam ! Combined flux in latest and established models = 0.0883022 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 0.0883022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281985Jy sigma=0.013240 ! Fit after self-cal, rms=0.281759Jy sigma=0.013235 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.36 FD 0.42 HN 0.80 KP 0.48 ! LA 0.49 MK 1.02 NL 0.54 OV 0.50 ! PT 0.52 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.38 FD 0.39 HN 0.85 KP 0.47 ! LA 0.47 MK 1.00 NL 0.64 OV 0.50 ! PT 0.51 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.38 FD 0.41 HN 0.82 KP 0.49 ! LA 0.47 MK 1.01 NL 0.58 OV 0.46 ! PT 0.50 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 21.15 FD 0.45 HN 0.96 KP 1.00* ! LA 23.17 MK 1.28 NL 1.00* OV 1.00* ! PT 0.59 SC 1.00* ! ! ! Fit before self-cal, rms=0.281759Jy sigma=0.013235 ! Fit after self-cal, rms=0.745117Jy sigma=0.000914 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.151 mas, bmaj=9.818 mas, bpa=-0.7618 degrees ! Estimated noise=329.251 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370521 Jy ! Component: 100 - total flux cleaned = 0.00280237 Jy ! Component: 150 - total flux cleaned = 0.00228343 Jy ! Component: 200 - total flux cleaned = 0.00204381 Jy ! Total flux subtracted in 200 components = 0.00204381 Jy ! Clean residual min=-0.005477 max=0.006105 Jy/beam ! Clean residual mean=0.000015 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.090346 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.090346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.743279Jy sigma=0.000882 ! Fit after self-cal, rms=0.742147Jy sigma=0.000856 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.742147Jy sigma=0.000856 ! Fit after self-cal, rms=0.071221Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.996 mas, bmaj=9.424 mas, bpa=-2.2 degrees ! Estimated noise=329.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00599022 Jy ! Component: 100 - total flux cleaned = 0.00581672 Jy ! Component: 150 - total flux cleaned = 0.00551129 Jy ! Component: 200 - total flux cleaned = 0.00551118 Jy ! Total flux subtracted in 200 components = 0.00551118 Jy ! Clean residual min=-0.003656 max=0.004201 Jy/beam ! Clean residual mean=0.000010 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.0958572 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.0958572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069329Jy sigma=0.000747 ! Fit after self-cal, rms=0.069195Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144697 Jy ! Component: 100 - total flux cleaned = 0.00159628 Jy ! Component: 150 - total flux cleaned = 0.00160028 Jy ! Component: 200 - total flux cleaned = 0.00147486 Jy ! Total flux subtracted in 200 components = 0.00147486 Jy ! Clean residual min=-0.003262 max=0.003653 Jy/beam ! Clean residual mean=0.000008 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.0973321 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 61 components and 0.0973321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067988Jy sigma=0.000736 ! Fit after self-cal, rms=0.067966Jy sigma=0.000736 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067966Jy sigma=0.000736 ! Fit after self-cal, rms=0.063367Jy sigma=0.000728 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.889 mas, bmaj=9.246 mas, bpa=-2.246 degrees ! Estimated noise=332.392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415756 Jy ! Component: 100 - total flux cleaned = 0.00366366 Jy ! Component: 150 - total flux cleaned = 0.003661 Jy ! Component: 200 - total flux cleaned = 0.00376394 Jy ! Total flux subtracted in 200 components = 0.00376394 Jy ! Clean residual min=-0.003196 max=0.002992 Jy/beam ! Clean residual mean=0.000005 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.101096 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 0.101096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062417Jy sigma=0.000716 ! Fit after self-cal, rms=0.062393Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.82826e-06 Jy ! Component: 100 - total flux cleaned = -9.02882e-06 Jy ! Component: 150 - total flux cleaned = 8.46594e-05 Jy ! Component: 200 - total flux cleaned = 8.42563e-05 Jy ! Total flux subtracted in 200 components = 8.42563e-05 Jy ! Clean residual min=-0.002965 max=0.002820 Jy/beam ! Clean residual mean=0.000005 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.10118 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 80 components and 0.10118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061843Jy sigma=0.000711 ! Fit after self-cal, rms=0.061838Jy sigma=0.000711 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061838Jy sigma=0.000711 ! Fit after self-cal, rms=0.059419Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.1 mas, bmaj=15.86 mas, bpa=2.699 degrees ! Estimated noise=351.811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214929 Jy ! Component: 100 - total flux cleaned = 0.00176362 Jy ! Component: 150 - total flux cleaned = 0.00143619 Jy ! Component: 200 - total flux cleaned = 0.00126884 Jy ! Total flux subtracted in 200 components = 0.00126884 Jy ! Clean residual min=-0.001925 max=0.001913 Jy/beam ! Clean residual mean=0.000005 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.102449 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.102449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059198Jy sigma=0.000701 ! Fit after self-cal, rms=0.059167Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000297931 Jy ! Component: 100 - total flux cleaned = -0.000372071 Jy ! Component: 150 - total flux cleaned = -0.000443991 Jy ! Component: 200 - total flux cleaned = -0.000480075 Jy ! Total flux subtracted in 200 components = -0.000480075 Jy ! Clean residual min=-0.001863 max=0.001871 Jy/beam ! Clean residual mean=0.000005 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.101969 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 112 components and 0.101969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059103Jy sigma=0.000700 ! Fit after self-cal, rms=0.059118Jy sigma=0.000700 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=9.117 mas, bpa=-2.249 degrees ! Estimated noise=333.663 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.813 x 9.117 at -2.249 degrees (North through East) ! Clean map min=-0.0082951 max=0.10913 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=7.759 mas, bpa=-3.407 degrees ! Estimated noise=558.199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0948568 Jy ! Component: 100 - total flux cleaned = 0.105216 Jy ! Component: 150 - total flux cleaned = 0.104118 Jy ! Component: 200 - total flux cleaned = 0.104495 Jy ! Total flux subtracted in 200 components = 0.104495 Jy ! Clean residual min=-0.006120 max=0.006227 Jy/beam ! Clean residual mean=0.000007 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.104495 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.104495 Jy ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=9.117 mas, bpa=-2.249 degrees ! Estimated noise=333.663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00249196 Jy ! Component: 100 - total flux cleaned = -0.00188199 Jy ! Component: 150 - total flux cleaned = -0.00153168 Jy ! Component: 200 - total flux cleaned = -0.00121189 Jy ! Total flux subtracted in 200 components = -0.00121189 Jy ! Clean residual min=-0.002781 max=0.003506 Jy/beam ! Clean residual mean=0.000005 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.103283 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.103283 Jy ! Inverting map ! Added new window around map position (-5, 93.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151383 Jy ! Component: 100 - total flux cleaned = 0.00178934 Jy ! Component: 150 - total flux cleaned = 0.00204156 Jy ! Component: 200 - total flux cleaned = 0.00216015 Jy ! Total flux subtracted in 200 components = 0.00216015 Jy ! Clean residual min=-0.002528 max=0.003068 Jy/beam ! Clean residual mean=0.000005 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.105443 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 44 components and 0.105443 Jy ! Inverting map ! Added new window around map position (12.5, 72.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140571 Jy ! Component: 100 - total flux cleaned = 0.00150721 Jy ! Component: 150 - total flux cleaned = 0.00170095 Jy ! Component: 200 - total flux cleaned = 0.00170156 Jy ! Total flux subtracted in 200 components = 0.00170156 Jy ! Clean residual min=-0.002375 max=0.002482 Jy/beam ! Clean residual mean=0.000005 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.107145 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 66 components and 0.107145 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.1 mas, bmaj=15.86 mas, bpa=2.699 degrees ! Estimated noise=351.811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00160108 Jy ! Component: 100 - total flux cleaned = -0.00243943 Jy ! Component: 150 - total flux cleaned = -0.00305167 Jy ! Component: 200 - total flux cleaned = -0.00343474 Jy ! Total flux subtracted in 200 components = -0.00343474 Jy ! Clean residual min=-0.001810 max=0.001922 Jy/beam ! Clean residual mean=0.000006 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.10371 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000360748 Jy ! Component: 100 - total flux cleaned = -0.000659321 Jy ! Component: 150 - total flux cleaned = -0.000944069 Jy ! Component: 200 - total flux cleaned = -0.00113776 Jy ! Total flux subtracted in 200 components = -0.00113776 Jy ! Clean residual min=-0.001666 max=0.001864 Jy/beam ! Clean residual mean=0.000005 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.102572 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 106 components and 0.102572 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=9.117 mas, bpa=-2.249 degrees ! Estimated noise=333.663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000706613 Jy ! Component: 100 - total flux cleaned = 0.000870063 Jy ! Component: 150 - total flux cleaned = 0.00117615 Jy ! Component: 200 - total flux cleaned = 0.00124685 Jy ! Total flux subtracted in 200 components = 0.00124685 Jy ! Clean residual min=-0.002154 max=0.002254 Jy/beam ! Clean residual mean=0.000004 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.103819 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 135 components and 0.103819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058339Jy sigma=0.000691 ! Fit after self-cal, rms=0.058350Jy sigma=0.000690 wmodel J0608-1520_S_2017_04_28_pus_map.mod ! Writing 135 model components to file: J0608-1520_S_2017_04_28_pus_map.mod wobs J0608-1520_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0608-1520_S_2017_04_28_pus_uvs.fits wwins J0608-1520_S_2017_04_28_pus_map.win ! wwins: Wrote 5 windows to J0608-1520_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000377553 Jy ! Component: 100 - total flux cleaned = -0.000271071 Jy ! Component: 150 - total flux cleaned = -3.05993e-05 Jy ! Component: 200 - total flux cleaned = 3.53787e-05 Jy ! Component: 250 - total flux cleaned = 0.000196726 Jy ! Component: 300 - total flux cleaned = 0.000290778 Jy ! Component: 350 - total flux cleaned = 0.000413681 Jy ! Component: 400 - total flux cleaned = 0.000474466 Jy ! Component: 450 - total flux cleaned = 0.000622892 Jy ! Component: 500 - total flux cleaned = 0.000768275 Jy ! Component: 550 - total flux cleaned = 0.000853579 Jy ! Component: 600 - total flux cleaned = 0.0008816 Jy ! Component: 650 - total flux cleaned = 0.00107513 Jy ! Component: 700 - total flux cleaned = 0.00112942 Jy ! Component: 750 - total flux cleaned = 0.00134374 Jy ! Component: 800 - total flux cleaned = 0.00139628 Jy ! Component: 850 - total flux cleaned = 0.00155275 Jy ! Component: 900 - total flux cleaned = 0.00168125 Jy ! Component: 950 - total flux cleaned = 0.00183359 Jy ! Component: 1000 - total flux cleaned = 0.00190909 Jy ! Component: 1050 - total flux cleaned = 0.00203332 Jy ! Component: 1100 - total flux cleaned = 0.00220505 Jy ! Component: 1150 - total flux cleaned = 0.00237456 Jy ! Component: 1200 - total flux cleaned = 0.00247029 Jy ! Component: 1250 - total flux cleaned = 0.00258917 Jy ! Component: 1300 - total flux cleaned = 0.00268294 Jy ! Component: 1350 - total flux cleaned = 0.00282234 Jy ! Component: 1400 - total flux cleaned = 0.00293708 Jy ! Component: 1450 - total flux cleaned = 0.00302788 Jy ! Component: 1500 - total flux cleaned = 0.00307275 Jy ! Component: 1550 - total flux cleaned = 0.00318429 Jy ! Component: 1600 - total flux cleaned = 0.0032503 Jy ! Component: 1650 - total flux cleaned = 0.00333772 Jy ! Component: 1700 - total flux cleaned = 0.00342452 Jy ! Component: 1750 - total flux cleaned = 0.00353169 Jy ! Component: 1800 - total flux cleaned = 0.0036587 Jy ! Component: 1850 - total flux cleaned = 0.00370077 Jy ! Component: 1900 - total flux cleaned = 0.00378399 Jy ! Component: 1950 - total flux cleaned = 0.00396923 Jy ! Component: 2000 - total flux cleaned = 0.00403024 Jy ! Component: 2050 - total flux cleaned = 0.00411094 Jy ! Component: 2100 - total flux cleaned = 0.00425093 Jy ! Component: 2150 - total flux cleaned = 0.0043103 Jy ! Component: 2200 - total flux cleaned = 0.00444787 Jy ! Component: 2250 - total flux cleaned = 0.00456469 Jy ! Component: 2300 - total flux cleaned = 0.00458394 Jy ! Component: 2350 - total flux cleaned = 0.00471799 Jy ! Component: 2400 - total flux cleaned = 0.00475595 Jy ! Component: 2450 - total flux cleaned = 0.00488747 Jy ! Component: 2500 - total flux cleaned = 0.00496195 Jy ! Component: 2550 - total flux cleaned = 0.00501739 Jy ! Component: 2600 - total flux cleaned = 0.0050909 Jy ! Component: 2650 - total flux cleaned = 0.00518171 Jy ! Component: 2700 - total flux cleaned = 0.00523576 Jy ! Component: 2750 - total flux cleaned = 0.00530726 Jy ! Component: 2800 - total flux cleaned = 0.00534276 Jy ! Component: 2850 - total flux cleaned = 0.00541309 Jy ! Component: 2900 - total flux cleaned = 0.00544792 Jy ! Component: 2950 - total flux cleaned = 0.00549981 Jy ! Component: 3000 - total flux cleaned = 0.00555133 Jy ! Component: 3050 - total flux cleaned = 0.00560248 Jy ! Component: 3100 - total flux cleaned = 0.00560257 Jy ! Component: 3150 - total flux cleaned = 0.00568664 Jy ! Component: 3200 - total flux cleaned = 0.00568655 Jy ! Component: 3250 - total flux cleaned = 0.0057691 Jy ! Component: 3300 - total flux cleaned = 0.00578547 Jy ! Component: 3350 - total flux cleaned = 0.00580179 Jy ! Component: 3400 - total flux cleaned = 0.00591482 Jy ! Component: 3450 - total flux cleaned = 0.00593079 Jy ! Component: 3500 - total flux cleaned = 0.00596261 Jy ! Component: 3550 - total flux cleaned = 0.00602576 Jy ! Component: 3600 - total flux cleaned = 0.00605721 Jy ! Component: 3650 - total flux cleaned = 0.00616594 Jy ! Component: 3700 - total flux cleaned = 0.00616594 Jy ! Component: 3750 - total flux cleaned = 0.00621201 Jy ! Component: 3800 - total flux cleaned = 0.00630323 Jy ! Component: 3850 - total flux cleaned = 0.00630329 Jy ! Component: 3900 - total flux cleaned = 0.00630324 Jy ! Component: 3950 - total flux cleaned = 0.00634784 Jy ! Component: 4000 - total flux cleaned = 0.00633306 Jy ! Component: 4050 - total flux cleaned = 0.00634768 Jy ! Total flux subtracted in 4096 components = 0.0063769 Jy ! Clean residual min=-0.000726 max=0.000747 Jy/beam ! Clean residual mean=0.000002 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.110196 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 384 components and 0.110196 Jy ![Exited script file: muppet] wmap "J0608-1520_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.813 x 9.117 at -2.249 degrees (North through East) ! Clean map min=-0.0033292 max=0.11347 Jy/beam ! Writing clean map to FITS file: J0608-1520_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113471 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000261733 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.691981 0.691981 1.38396 2.76793 5.53585 11.0717 22.1434 44.2868 88.5736 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.813 x 9.117 at -2.249 degrees (North through East) ! Clean map min=-0.0033292 max=0.11347 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0608-1520_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:18:33 2019