! Started logfile: J0607-2447_S_2017_07_16_pus_uvs.log on Thu May 9 11:02:41 2019 obs J0607-2447_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0607-2447_S_2017_07_16_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.659127 visibilities/baseline/integration-bin. ! Found source: J0607-2447 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 6644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0607-2447_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 434 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970233Jy sigma=0.006746 ! Fit after self-cal, rms=0.926782Jy sigma=0.006464 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=6.876 mas, bpa=-11.4 degrees ! Estimated noise=2128.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0588357 Jy ! Component: 100 - total flux cleaned = 0.0739966 Jy ! Total flux subtracted in 100 components = 0.0739966 Jy ! Clean residual min=-0.007113 max=0.007483 Jy/beam ! Clean residual mean=-0.000014 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 0.0739966 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0739966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102344Jy sigma=0.000662 ! Fit after self-cal, rms=0.102049Jy sigma=0.000660 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=7.671 mas, bpa=-9.547 degrees ! Estimated noise=1588.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106268 Jy ! Component: 100 - total flux cleaned = 0.0162612 Jy ! Component: 150 - total flux cleaned = 0.0194632 Jy ! Component: 200 - total flux cleaned = 0.0213034 Jy ! Total flux subtracted in 200 components = 0.0213034 Jy ! Clean residual min=-0.004186 max=0.005845 Jy/beam ! Clean residual mean=-0.000035 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.0953 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 38 components and 0.0953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101016Jy sigma=0.000652 ! Fit after self-cal, rms=0.100957Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.00* HN 1.06 KP 0.97 ! LA 0.98 MK 1.17 NL 0.92 OV 1.11 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.03 KP 1.04 ! LA 1.00 MK 1.10 NL 1.08 OV 1.11 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.98 KP 0.92 ! LA 0.93 MK 1.01 NL 1.00 OV 1.00 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.100957Jy sigma=0.000651 ! Fit after self-cal, rms=0.101380Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=7.771 mas, bpa=-8.116 degrees ! Estimated noise=1622.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (36.5, -114). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546609 Jy ! Component: 100 - total flux cleaned = 0.00703232 Jy ! Component: 150 - total flux cleaned = 0.00711224 Jy ! Component: 200 - total flux cleaned = 0.00724565 Jy ! Total flux subtracted in 200 components = 0.00724565 Jy ! Clean residual min=-0.003798 max=0.003643 Jy/beam ! Clean residual mean=-0.000014 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.102546 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.102546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101079Jy sigma=0.000650 ! Fit after self-cal, rms=0.101015Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101015Jy sigma=0.000650 ! Fit after self-cal, rms=0.099716Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.812 mas, bpa=-7.913 degrees ! Estimated noise=1610.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148392 Jy ! Component: 100 - total flux cleaned = 0.00163227 Jy ! Component: 150 - total flux cleaned = 0.00150861 Jy ! Component: 200 - total flux cleaned = 0.00155968 Jy ! Total flux subtracted in 200 components = 0.00155968 Jy ! Clean residual min=-0.003447 max=0.003468 Jy/beam ! Clean residual mean=-0.000012 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.104105 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.104105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099626Jy sigma=0.000648 ! Fit after self-cal, rms=0.099647Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00043211 Jy ! Component: 100 - total flux cleaned = 0.000437087 Jy ! Component: 150 - total flux cleaned = 0.000436763 Jy ! Component: 200 - total flux cleaned = 0.000483317 Jy ! Total flux subtracted in 200 components = 0.000483317 Jy ! Clean residual min=-0.003426 max=0.003517 Jy/beam ! Clean residual mean=-0.000012 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.104589 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.104589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099599Jy sigma=0.000647 ! Fit after self-cal, rms=0.099586Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099586Jy sigma=0.000647 ! Fit after self-cal, rms=0.098917Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=7.828 mas, bpa=-8.077 degrees ! Estimated noise=1592.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000583602 Jy ! Component: 100 - total flux cleaned = -0.000528927 Jy ! Component: 150 - total flux cleaned = -0.000483913 Jy ! Component: 200 - total flux cleaned = -0.000442584 Jy ! Total flux subtracted in 200 components = -0.000442584 Jy ! Clean residual min=-0.003031 max=0.003442 Jy/beam ! Clean residual mean=-0.000014 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.104146 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.104146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098872Jy sigma=0.000647 ! Fit after self-cal, rms=0.098905Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-57.5, 85.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277124 Jy ! Component: 100 - total flux cleaned = 0.00291384 Jy ! Component: 150 - total flux cleaned = 0.00267861 Jy ! Component: 200 - total flux cleaned = 0.0024166 Jy ! Total flux subtracted in 200 components = 0.0024166 Jy ! Clean residual min=-0.003259 max=0.003254 Jy/beam ! Clean residual mean=-0.000011 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.106563 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.106563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098781Jy sigma=0.000646 ! Fit after self-cal, rms=0.098773Jy sigma=0.000646 ! Inverting map ! Added new window around map position (122.5, -44). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206061 Jy ! Component: 100 - total flux cleaned = 0.00273684 Jy ! Component: 150 - total flux cleaned = 0.00294251 Jy ! Component: 200 - total flux cleaned = 0.00288038 Jy ! Total flux subtracted in 200 components = 0.00288038 Jy ! Clean residual min=-0.002994 max=0.003071 Jy/beam ! Clean residual mean=-0.000013 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.109443 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 123 components and 0.109443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098631Jy sigma=0.000645 ! Fit after self-cal, rms=0.098610Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098610Jy sigma=0.000644 ! Fit after self-cal, rms=0.097765Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.584 mas, bmaj=18.62 mas, bpa=-8.033 degrees ! Estimated noise=2064.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139525 Jy ! Component: 100 - total flux cleaned = 0.00162691 Jy ! Component: 150 - total flux cleaned = 0.00155791 Jy ! Component: 200 - total flux cleaned = 0.0014662 Jy ! Total flux subtracted in 200 components = 0.0014662 Jy ! Clean residual min=-0.002498 max=0.002833 Jy/beam ! Clean residual mean=-0.000031 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.110909 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 139 components and 0.110909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097741Jy sigma=0.000644 ! Fit after self-cal, rms=0.097754Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000618911 Jy ! Component: 100 - total flux cleaned = 0.000755572 Jy ! Component: 150 - total flux cleaned = 0.000696074 Jy ! Component: 200 - total flux cleaned = 0.00064337 Jy ! Total flux subtracted in 200 components = 0.00064337 Jy ! Clean residual min=-0.002503 max=0.002864 Jy/beam ! Clean residual mean=-0.000031 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.111553 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 154 components and 0.111553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097744Jy sigma=0.000644 ! Fit after self-cal, rms=0.097747Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=7.795 mas, bpa=-8.462 degrees ! Estimated noise=1579.19 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.975 x 7.795 at -8.462 degrees (North through East) ! Clean map min=-0.003817 max=0.074906 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.545 mas, bmaj=7.021 mas, bpa=-10.34 degrees ! Estimated noise=2104.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561081 Jy ! Component: 100 - total flux cleaned = 0.0723884 Jy ! Component: 150 - total flux cleaned = 0.0832876 Jy ! Component: 200 - total flux cleaned = 0.0906759 Jy ! Total flux subtracted in 200 components = 0.0906759 Jy ! Clean residual min=-0.006691 max=0.006444 Jy/beam ! Clean residual mean=-0.000010 rms=0.001698 Jy/beam ! Combined flux in latest and established models = 0.0906759 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0906759 Jy ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=7.795 mas, bpa=-8.462 degrees ! Estimated noise=1579.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00759883 Jy ! Component: 100 - total flux cleaned = 0.0125434 Jy ! Component: 150 - total flux cleaned = 0.0147379 Jy ! Component: 200 - total flux cleaned = 0.0159277 Jy ! Total flux subtracted in 200 components = 0.0159277 Jy ! Clean residual min=-0.003403 max=0.003879 Jy/beam ! Clean residual mean=-0.000017 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.106604 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 49 components and 0.106604 Jy ! Inverting map ! Added new window around map position (9.5, 18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295684 Jy ! Component: 100 - total flux cleaned = 0.00395678 Jy ! Component: 150 - total flux cleaned = 0.00485614 Jy ! Component: 200 - total flux cleaned = 0.00549013 Jy ! Total flux subtracted in 200 components = 0.00549013 Jy ! Clean residual min=-0.002967 max=0.003123 Jy/beam ! Clean residual mean=-0.000012 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.112094 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 73 components and 0.112094 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.584 mas, bmaj=18.62 mas, bpa=-8.033 degrees ! Estimated noise=2064.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120444 Jy ! Component: 100 - total flux cleaned = 0.00157006 Jy ! Component: 150 - total flux cleaned = 0.00179882 Jy ! Component: 200 - total flux cleaned = 0.0018817 Jy ! Total flux subtracted in 200 components = 0.0018817 Jy ! Clean residual min=-0.002300 max=0.002805 Jy/beam ! Clean residual mean=-0.000024 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.113975 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.44668e-06 Jy ! Component: 100 - total flux cleaned = -2.97042e-06 Jy ! Component: 150 - total flux cleaned = -4.32911e-06 Jy ! Component: 200 - total flux cleaned = 2.97594e-05 Jy ! Total flux subtracted in 200 components = 2.97594e-05 Jy ! Clean residual min=-0.002258 max=0.002684 Jy/beam ! Clean residual mean=-0.000023 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.114005 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 0.114005 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=7.795 mas, bpa=-8.462 degrees ! Estimated noise=1579.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000556323 Jy ! Component: 100 - total flux cleaned = -0.000486276 Jy ! Component: 150 - total flux cleaned = -0.000421416 Jy ! Component: 200 - total flux cleaned = -0.000295819 Jy ! Total flux subtracted in 200 components = -0.000295819 Jy ! Clean residual min=-0.002711 max=0.002881 Jy/beam ! Clean residual mean=-0.000010 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.113709 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 125 components and 0.113709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097663Jy sigma=0.000644 ! Fit after self-cal, rms=0.097656Jy sigma=0.000643 wmodel J0607-2447_S_2017_07_16_pus_map.mod ! Writing 125 model components to file: J0607-2447_S_2017_07_16_pus_map.mod wobs J0607-2447_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0607-2447_S_2017_07_16_pus_uvs.fits wwins J0607-2447_S_2017_07_16_pus_map.win ! wwins: Wrote 6 windows to J0607-2447_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443774 Jy ! Component: 100 - total flux cleaned = -2.23318e-05 Jy ! Component: 150 - total flux cleaned = -0.000509726 Jy ! Component: 200 - total flux cleaned = -0.000637183 Jy ! Component: 250 - total flux cleaned = -0.000720241 Jy ! Component: 300 - total flux cleaned = -0.00076036 Jy ! Component: 350 - total flux cleaned = -0.000874971 Jy ! Component: 400 - total flux cleaned = -0.000762329 Jy ! Component: 450 - total flux cleaned = -0.000653408 Jy ! Component: 500 - total flux cleaned = -0.000582523 Jy ! Component: 550 - total flux cleaned = -0.000478244 Jy ! Component: 600 - total flux cleaned = -0.000512604 Jy ! Component: 650 - total flux cleaned = -0.000545777 Jy ! Component: 700 - total flux cleaned = -0.000479734 Jy ! Component: 750 - total flux cleaned = -0.000479905 Jy ! Component: 800 - total flux cleaned = -0.000480119 Jy ! Component: 850 - total flux cleaned = -0.000448951 Jy ! Component: 900 - total flux cleaned = -0.00038869 Jy ! Component: 950 - total flux cleaned = -0.000269856 Jy ! Component: 1000 - total flux cleaned = -0.000211613 Jy ! Component: 1050 - total flux cleaned = -0.000154633 Jy ! Component: 1100 - total flux cleaned = -4.11885e-05 Jy ! Component: 1150 - total flux cleaned = 7.00999e-05 Jy ! Component: 1200 - total flux cleaned = 0.000124702 Jy ! Component: 1250 - total flux cleaned = 0.000287297 Jy ! Component: 1300 - total flux cleaned = 0.000313601 Jy ! Component: 1350 - total flux cleaned = 0.000498205 Jy ! Component: 1400 - total flux cleaned = 0.000549799 Jy ! Component: 1450 - total flux cleaned = 0.000678267 Jy ! Component: 1500 - total flux cleaned = 0.000728621 Jy ! Component: 1550 - total flux cleaned = 0.00082865 Jy ! Component: 1600 - total flux cleaned = 0.000952253 Jy ! Component: 1650 - total flux cleaned = 0.0010749 Jy ! Component: 1700 - total flux cleaned = 0.00114701 Jy ! Component: 1750 - total flux cleaned = 0.00112308 Jy ! Component: 1800 - total flux cleaned = 0.00119428 Jy ! Component: 1850 - total flux cleaned = 0.00128761 Jy ! Component: 1900 - total flux cleaned = 0.00131075 Jy ! Component: 1950 - total flux cleaned = 0.00140202 Jy ! Component: 2000 - total flux cleaned = 0.00146989 Jy ! Component: 2050 - total flux cleaned = 0.00149234 Jy ! Component: 2100 - total flux cleaned = 0.00153678 Jy ! Component: 2150 - total flux cleaned = 0.00162433 Jy ! Component: 2200 - total flux cleaned = 0.00166762 Jy ! Component: 2250 - total flux cleaned = 0.00168892 Jy ! Component: 2300 - total flux cleaned = 0.00171044 Jy ! Component: 2350 - total flux cleaned = 0.00177374 Jy ! Component: 2400 - total flux cleaned = 0.00181563 Jy ! Component: 2450 - total flux cleaned = 0.00187801 Jy ! Component: 2500 - total flux cleaned = 0.00193967 Jy ! Component: 2550 - total flux cleaned = 0.00202135 Jy ! Component: 2600 - total flux cleaned = 0.00208224 Jy ! Component: 2650 - total flux cleaned = 0.00212226 Jy ! Component: 2700 - total flux cleaned = 0.00220186 Jy ! Component: 2750 - total flux cleaned = 0.0022415 Jy ! Component: 2800 - total flux cleaned = 0.00228091 Jy ! Component: 2850 - total flux cleaned = 0.0023591 Jy ! Component: 2900 - total flux cleaned = 0.00249421 Jy ! Component: 2950 - total flux cleaned = 0.00245572 Jy ! Component: 3000 - total flux cleaned = 0.0025321 Jy ! Component: 3050 - total flux cleaned = 0.00257 Jy ! Component: 3100 - total flux cleaned = 0.00264494 Jy ! Component: 3150 - total flux cleaned = 0.00262611 Jy ! Component: 3200 - total flux cleaned = 0.00262632 Jy ! Component: 3250 - total flux cleaned = 0.00271861 Jy ! Component: 3300 - total flux cleaned = 0.0028466 Jy ! Component: 3350 - total flux cleaned = 0.0029012 Jy ! Component: 3400 - total flux cleaned = 0.00295552 Jy ! Component: 3450 - total flux cleaned = 0.00299147 Jy ! Component: 3500 - total flux cleaned = 0.00304526 Jy ! Component: 3550 - total flux cleaned = 0.00309888 Jy ! Component: 3600 - total flux cleaned = 0.00315193 Jy ! Component: 3650 - total flux cleaned = 0.00320476 Jy ! Component: 3700 - total flux cleaned = 0.00329226 Jy ! Component: 3750 - total flux cleaned = 0.0033966 Jy ! Component: 3800 - total flux cleaned = 0.0034312 Jy ! Component: 3850 - total flux cleaned = 0.00344846 Jy ! Component: 3900 - total flux cleaned = 0.00353411 Jy ! Component: 3950 - total flux cleaned = 0.00363629 Jy ! Component: 4000 - total flux cleaned = 0.00367031 Jy ! Component: 4050 - total flux cleaned = 0.00377159 Jy ! Total flux subtracted in 4096 components = 0.0037717 Jy ! Clean residual min=-0.000944 max=0.000972 Jy/beam ! Clean residual mean=0.000000 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.117481 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 369 components and 0.117481 Jy ![Exited script file: muppet] wmap "J0607-2447_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.975 x 7.795 at -8.462 degrees (North through East) ! Clean map min=-0.0029136 max=0.073172 Jy/beam ! Writing clean map to FITS file: J0607-2447_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0731718 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000276381 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13315 1.13315 2.26629 4.53259 9.06518 18.1304 36.2607 72.5214 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.975 x 7.795 at -8.462 degrees (North through East) ! Clean map min=-0.0029136 max=0.073172 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0607-2447_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:02:46 2019