! Started logfile: J0604+1055_X_2017_03_23_pus_uvs.log on Mon May 13 10:19:10 2019 obs J0604+1055_X_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0604+1055_X_2017_03_23_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.902065 visibilities/baseline/integration-bin. ! Found source: J0604+1055 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1124 lines of history. ! ! Reading 55044 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0604+1055_X_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.869840Jy sigma=0.006820 ! Fit after self-cal, rms=0.846510Jy sigma=0.006654 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7793 mas, bmaj=1.768 mas, bpa=-6.475 degrees ! Estimated noise=747.467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118149 Jy ! Component: 100 - total flux cleaned = 0.156164 Jy ! Total flux subtracted in 100 components = 0.156164 Jy ! Clean residual min=-0.008833 max=0.032112 Jy/beam ! Clean residual mean=-0.000065 rms=0.002861 Jy/beam ! Combined flux in latest and established models = 0.156164 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.156164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110638Jy sigma=0.000791 ! Fit after self-cal, rms=0.110410Jy sigma=0.000789 ! Inverting map ! Added new window around map position (-1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0290938 Jy ! Component: 100 - total flux cleaned = 0.0426936 Jy ! Total flux subtracted in 100 components = 0.0426936 Jy ! Clean residual min=-0.006694 max=0.020486 Jy/beam ! Clean residual mean=-0.000051 rms=0.001860 Jy/beam ! Combined flux in latest and established models = 0.198858 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.198858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102365Jy sigma=0.000712 ! Fit after self-cal, rms=0.101799Jy sigma=0.000707 ! Inverting map ! Added new window around map position (-4.2, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179249 Jy ! Component: 100 - total flux cleaned = 0.0270638 Jy ! Total flux subtracted in 100 components = 0.0270638 Jy ! Clean residual min=-0.004453 max=0.005807 Jy/beam ! Clean residual mean=-0.000024 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.225922 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.225922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098630Jy sigma=0.000674 ! Fit after self-cal, rms=0.098296Jy sigma=0.000671 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00840539 Jy ! Component: 100 - total flux cleaned = 0.0140324 Jy ! Total flux subtracted in 100 components = 0.0140324 Jy ! Clean residual min=-0.003685 max=0.003824 Jy/beam ! Clean residual mean=-0.000011 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.239954 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.239954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097550Jy sigma=0.000662 ! Fit after self-cal, rms=0.097490Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9587 mas, bmaj=1.996 mas, bpa=-4.813 degrees ! Estimated noise=392.377 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00605615 Jy ! Component: 100 - total flux cleaned = 0.00990936 Jy ! Component: 150 - total flux cleaned = 0.0119831 Jy ! Component: 200 - total flux cleaned = 0.0131217 Jy ! Total flux subtracted in 200 components = 0.0131217 Jy ! Clean residual min=-0.003330 max=0.002826 Jy/beam ! Clean residual mean=0.000011 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.253076 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 42 components and 0.253076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097177Jy sigma=0.000657 ! Fit after self-cal, rms=0.097139Jy sigma=0.000656 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 KP 0.99 ! LA 0.99 MK 1.02 NL 0.94 OV 0.99 ! PT 1.08 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.00 KP 0.98 ! LA 0.98 MK 1.03 NL 0.94 OV 1.01 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 0.98 KP 0.97 ! LA 1.01 MK 0.99 NL 0.94 OV 1.00 ! PT 1.10 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.98 KP 0.97 ! LA 1.03 MK 0.99 NL 0.93 OV 1.06 ! PT 1.05 SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 0.94 KP 1.00 ! LA 0.98 MK 1.00 NL 0.96 OV 1.00 ! PT 1.06 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.97 KP 0.97 ! LA 1.00 MK 1.01 NL 0.95 OV 0.99 ! PT 1.08 SC 1.11 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.98 KP 0.99 ! LA 1.02 MK 1.01 NL 0.96 OV 1.01 ! PT 1.06 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.07 HN 0.98 KP 0.97 ! LA 0.99 MK 1.00 NL 0.94 OV 0.99 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 1.00 ! LA 1.02 MK 0.97 NL 0.95 OV 1.01 ! PT 1.08 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.01 KP 1.00 ! LA 1.02 MK 0.96 NL 0.96 OV 1.00 ! PT 1.09 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.00 KP 0.95 ! LA 1.02 MK 0.99 NL 0.93 OV 1.01 ! PT 1.08 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 0.96 KP 1.00 ! LA 1.00 MK 0.98 NL 0.96 OV 1.03 ! PT 1.07 SC 0.97 ! ! ! Fit before self-cal, rms=0.097139Jy sigma=0.000656 ! Fit after self-cal, rms=0.097701Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9609 mas, bmaj=2 mas, bpa=-5.27 degrees ! Estimated noise=388.242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120399 Jy ! Component: 100 - total flux cleaned = 0.00155861 Jy ! Component: 150 - total flux cleaned = 0.00183434 Jy ! Component: 200 - total flux cleaned = 0.00208643 Jy ! Total flux subtracted in 200 components = 0.00208643 Jy ! Clean residual min=-0.001709 max=0.001657 Jy/beam ! Clean residual mean=-0.000010 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.255162 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.255162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097643Jy sigma=0.000651 ! Fit after self-cal, rms=0.097684Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097684Jy sigma=0.000651 ! Fit after self-cal, rms=0.099435Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9595 mas, bmaj=1.99 mas, bpa=-5.25 degrees ! Estimated noise=387.865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133412 Jy ! Component: 100 - total flux cleaned = 0.00165296 Jy ! Component: 150 - total flux cleaned = 0.00184935 Jy ! Component: 200 - total flux cleaned = 0.00196975 Jy ! Total flux subtracted in 200 components = 0.00196975 Jy ! Clean residual min=-0.001220 max=0.001285 Jy/beam ! Clean residual mean=-0.000003 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.257132 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.257132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099417Jy sigma=0.000648 ! Fit after self-cal, rms=0.099449Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101735 Jy ! Component: 100 - total flux cleaned = 0.00119082 Jy ! Component: 150 - total flux cleaned = 0.00119131 Jy ! Component: 200 - total flux cleaned = 0.00117313 Jy ! Total flux subtracted in 200 components = 0.00117313 Jy ! Clean residual min=-0.001228 max=0.001148 Jy/beam ! Clean residual mean=-0.000000 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.258305 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 92 components and 0.258305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099435Jy sigma=0.000648 ! Fit after self-cal, rms=0.099432Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099432Jy sigma=0.000648 ! Fit after self-cal, rms=0.100502Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9591 mas, bmaj=1.99 mas, bpa=-5.282 degrees ! Estimated noise=387.554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083683 Jy ! Component: 100 - total flux cleaned = 0.00114723 Jy ! Component: 150 - total flux cleaned = 0.0012732 Jy ! Component: 200 - total flux cleaned = 0.00128979 Jy ! Total flux subtracted in 200 components = 0.00128979 Jy ! Clean residual min=-0.001119 max=0.001150 Jy/beam ! Clean residual mean=-0.000002 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.259595 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 0.259595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100493Jy sigma=0.000648 ! Fit after self-cal, rms=0.100505Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.6, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801874 Jy ! Component: 100 - total flux cleaned = 0.00080587 Jy ! Component: 150 - total flux cleaned = 0.000882353 Jy ! Component: 200 - total flux cleaned = 0.000916268 Jy ! Total flux subtracted in 200 components = 0.000916268 Jy ! Clean residual min=-0.001033 max=0.000976 Jy/beam ! Clean residual mean=0.000000 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.260511 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 124 components and 0.260511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100491Jy sigma=0.000648 ! Fit after self-cal, rms=0.100488Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100488Jy sigma=0.000648 ! Fit after self-cal, rms=0.100585Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=2.971 mas, bpa=-3.926 degrees ! Estimated noise=474.441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691114 Jy ! Component: 100 - total flux cleaned = 0.000782697 Jy ! Component: 150 - total flux cleaned = 0.000810834 Jy ! Component: 200 - total flux cleaned = 0.000833519 Jy ! Total flux subtracted in 200 components = 0.000833519 Jy ! Clean residual min=-0.001040 max=0.001075 Jy/beam ! Clean residual mean=0.000000 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.261345 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 139 components and 0.261345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100580Jy sigma=0.000648 ! Fit after self-cal, rms=0.100580Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.17524e-05 Jy ! Component: 100 - total flux cleaned = 0.000130888 Jy ! Component: 150 - total flux cleaned = 0.000162642 Jy ! Component: 200 - total flux cleaned = 0.000180003 Jy ! Total flux subtracted in 200 components = 0.000180003 Jy ! Clean residual min=-0.001051 max=0.001092 Jy/beam ! Clean residual mean=0.000001 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.261525 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 149 components and 0.261525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100579Jy sigma=0.000648 ! Fit after self-cal, rms=0.100578Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9587 mas, bmaj=1.99 mas, bpa=-5.293 degrees ! Estimated noise=387.523 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9587 x 1.99 at -5.293 degrees (North through East) ! Clean map min=-0.00089658 max=0.15589 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7802 mas, bmaj=1.765 mas, bpa=-6.917 degrees ! Estimated noise=735.486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116207 Jy ! Component: 100 - total flux cleaned = 0.161152 Jy ! Component: 150 - total flux cleaned = 0.188211 Jy ! Component: 200 - total flux cleaned = 0.205976 Jy ! Total flux subtracted in 200 components = 0.205976 Jy ! Clean residual min=-0.003894 max=0.009803 Jy/beam ! Clean residual mean=-0.000042 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 0.205976 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.205976 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9587 mas, bmaj=1.99 mas, bpa=-5.293 degrees ! Estimated noise=387.523 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170098 Jy ! Component: 100 - total flux cleaned = 0.028142 Jy ! Component: 150 - total flux cleaned = 0.0357724 Jy ! Component: 200 - total flux cleaned = 0.0410914 Jy ! Total flux subtracted in 200 components = 0.0410914 Jy ! Clean residual min=-0.001569 max=0.002944 Jy/beam ! Clean residual mean=-0.000023 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.247067 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 0.247067 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375217 Jy ! Component: 100 - total flux cleaned = 0.00650432 Jy ! Component: 150 - total flux cleaned = 0.00855825 Jy ! Component: 200 - total flux cleaned = 0.0101192 Jy ! Total flux subtracted in 200 components = 0.0101192 Jy ! Clean residual min=-0.001121 max=0.001105 Jy/beam ! Clean residual mean=-0.000007 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.257187 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 58 components and 0.257187 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=2.971 mas, bpa=-3.926 degrees ! Estimated noise=474.441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175227 Jy ! Component: 100 - total flux cleaned = 0.00281597 Jy ! Component: 150 - total flux cleaned = 0.00353516 Jy ! Component: 200 - total flux cleaned = 0.0040285 Jy ! Total flux subtracted in 200 components = 0.0040285 Jy ! Clean residual min=-0.001017 max=0.001056 Jy/beam ! Clean residual mean=-0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.261215 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145638 Jy ! Component: 100 - total flux cleaned = 0.000253821 Jy ! Component: 150 - total flux cleaned = 0.00033538 Jy ! Component: 200 - total flux cleaned = 0.000396179 Jy ! Total flux subtracted in 200 components = 0.000396179 Jy ! Clean residual min=-0.001013 max=0.001069 Jy/beam ! Clean residual mean=0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.261611 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 126 components and 0.261611 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9587 mas, bmaj=1.99 mas, bpa=-5.293 degrees ! Estimated noise=387.523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.56302e-05 Jy ! Component: 100 - total flux cleaned = -3.06827e-05 Jy ! Component: 150 - total flux cleaned = -0.000111669 Jy ! Component: 200 - total flux cleaned = -0.000129856 Jy ! Total flux subtracted in 200 components = -0.000129856 Jy ! Clean residual min=-0.001002 max=0.000975 Jy/beam ! Clean residual mean=0.000000 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.261481 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 141 components and 0.261481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100585Jy sigma=0.000648 ! Fit after self-cal, rms=0.100575Jy sigma=0.000648 wmodel J0604+1055_X_2017_03_23_pus_map.mod ! Writing 141 model components to file: J0604+1055_X_2017_03_23_pus_map.mod wobs J0604+1055_X_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0604+1055_X_2017_03_23_pus_uvs.fits wwins J0604+1055_X_2017_03_23_pus_map.win ! wwins: Wrote 5 windows to J0604+1055_X_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126228 Jy ! Component: 100 - total flux cleaned = 0.000260158 Jy ! Component: 150 - total flux cleaned = 0.00030656 Jy ! Component: 200 - total flux cleaned = 0.000350662 Jy ! Component: 250 - total flux cleaned = 0.000463917 Jy ! Component: 300 - total flux cleaned = 0.000600885 Jy ! Component: 350 - total flux cleaned = 0.000681355 Jy ! Component: 400 - total flux cleaned = 0.000773493 Jy ! Component: 450 - total flux cleaned = 0.000837671 Jy ! Component: 500 - total flux cleaned = 0.000888313 Jy ! Component: 550 - total flux cleaned = 0.000950445 Jy ! Component: 600 - total flux cleaned = 0.00096267 Jy ! Component: 650 - total flux cleaned = 0.000998757 Jy ! Component: 700 - total flux cleaned = 0.000998563 Jy ! Component: 750 - total flux cleaned = 0.000975296 Jy ! Component: 800 - total flux cleaned = 0.000952567 Jy ! Component: 850 - total flux cleaned = 0.000986476 Jy ! Component: 900 - total flux cleaned = 0.000975142 Jy ! Component: 950 - total flux cleaned = 0.00094215 Jy ! Component: 1000 - total flux cleaned = 0.000942048 Jy ! Component: 1050 - total flux cleaned = 0.000942145 Jy ! Component: 1100 - total flux cleaned = 0.000942032 Jy ! Component: 1150 - total flux cleaned = 0.000941932 Jy ! Component: 1200 - total flux cleaned = 0.000931497 Jy ! Component: 1250 - total flux cleaned = 0.000982524 Jy ! Component: 1300 - total flux cleaned = 0.000951959 Jy ! Component: 1350 - total flux cleaned = 0.00100195 Jy ! Component: 1400 - total flux cleaned = 0.00095218 Jy ! Component: 1450 - total flux cleaned = 0.000942368 Jy ! Component: 1500 - total flux cleaned = 0.000961758 Jy ! Component: 1550 - total flux cleaned = 0.000971373 Jy ! Component: 1600 - total flux cleaned = 0.000933276 Jy ! Component: 1650 - total flux cleaned = 0.000942777 Jy ! Component: 1700 - total flux cleaned = 0.000952243 Jy ! Component: 1750 - total flux cleaned = 0.000943008 Jy ! Component: 1800 - total flux cleaned = 0.000961452 Jy ! Component: 1850 - total flux cleaned = 0.000952319 Jy ! Component: 1900 - total flux cleaned = 0.000970377 Jy ! Component: 1950 - total flux cleaned = 0.000988344 Jy ! Component: 2000 - total flux cleaned = 0.00101474 Jy ! Total flux subtracted in 2048 components = 0.000979366 Jy ! Clean residual min=-0.000455 max=0.000441 Jy/beam ! Clean residual mean=-0.000001 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.262461 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 292 components and 0.262461 Jy ![Exited script file: muppet] wmap "J0604+1055_X_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9587 x 1.99 at -5.293 degrees (North through East) ! Clean map min=-0.00084065 max=0.15608 Jy/beam ! Writing clean map to FITS file: J0604+1055_X_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.156081 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165739 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.318564 0.318564 0.637127 1.27425 2.54851 5.09702 10.194 20.3881 40.7762 81.5523 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.156 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9587 x 1.99 at -5.293 degrees (North through East) ! Clean map min=-0.00084065 max=0.15608 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0604+1055_X_2017_03_23_pus_uvs.log closed on Mon May 13 10:19:13 2019