! Started logfile: J0603-3144_S_2017_10_09_pus_uvs.log on Sun May 12 13:06:05 2019 obs J0603-3144_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0603-3144_S_2017_10_09_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.640086 visibilities/baseline/integration-bin. ! Found source: J0603-3144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 10692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0603-3144_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 317 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 317 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 670 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.939666Jy sigma=0.006178 ! Fit after self-cal, rms=0.907447Jy sigma=0.006000 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=15.9 mas, bpa=-23.98 degrees ! Estimated noise=2552.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0735254 Jy ! Component: 100 - total flux cleaned = 0.0917442 Jy ! Total flux subtracted in 100 components = 0.0917442 Jy ! Clean residual min=-0.008690 max=0.009372 Jy/beam ! Clean residual mean=-0.000021 rms=0.002565 Jy/beam ! Combined flux in latest and established models = 0.0917442 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0917442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110202Jy sigma=0.000655 ! Fit after self-cal, rms=0.110069Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=18.4 mas, bpa=-24.13 degrees ! Estimated noise=1306.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139724 Jy ! Component: 100 - total flux cleaned = 0.0212396 Jy ! Component: 150 - total flux cleaned = 0.0256066 Jy ! Component: 200 - total flux cleaned = 0.0284306 Jy ! Total flux subtracted in 200 components = 0.0284306 Jy ! Clean residual min=-0.005115 max=0.003991 Jy/beam ! Clean residual mean=-0.000001 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.120175 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 66 components and 0.120175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108235Jy sigma=0.000643 ! Fit after self-cal, rms=0.108192Jy sigma=0.000642 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.99 HN 1.01 KP 1.07 ! LA 0.99 MK 1.07 NL 0.89 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.10 KP 1.00 ! LA 0.97 MK 1.04 NL 1.03 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.07 KP 0.90 ! LA 0.76 MK 1.01 NL 1.18 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 222 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.90 KP 1.00* ! LA 1.00* MK 1.07 NL 1.00* OV 1.00* ! PT 1.08 ! ! ! Fit before self-cal, rms=0.108192Jy sigma=0.000642 ! Fit after self-cal, rms=0.111019Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=18.85 mas, bpa=-24.27 degrees ! Estimated noise=1349.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00053405 Jy ! Component: 100 - total flux cleaned = 0.000534522 Jy ! Component: 150 - total flux cleaned = 0.000606539 Jy ! Component: 200 - total flux cleaned = 0.000574458 Jy ! Total flux subtracted in 200 components = 0.000574458 Jy ! Clean residual min=-0.003395 max=0.003378 Jy/beam ! Clean residual mean=0.000041 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.120749 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 0.120749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110976Jy sigma=0.000641 ! Fit after self-cal, rms=0.111019Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111019Jy sigma=0.000640 ! Fit after self-cal, rms=0.110785Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=18.86 mas, bpa=-24.28 degrees ! Estimated noise=1350.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.86879e-05 Jy ! Component: 100 - total flux cleaned = -8.0474e-05 Jy ! Component: 150 - total flux cleaned = -7.98009e-05 Jy ! Component: 200 - total flux cleaned = -7.91725e-05 Jy ! Total flux subtracted in 200 components = -7.91725e-05 Jy ! Clean residual min=-0.003008 max=0.002929 Jy/beam ! Clean residual mean=0.000032 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.12067 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 0.12067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110757Jy sigma=0.000639 ! Fit after self-cal, rms=0.110759Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.48887e-05 Jy ! Component: 100 - total flux cleaned = 3.3561e-05 Jy ! Component: 150 - total flux cleaned = 3.28318e-05 Jy ! Component: 200 - total flux cleaned = 3.22112e-05 Jy ! Total flux subtracted in 200 components = 3.22112e-05 Jy ! Clean residual min=-0.003006 max=0.002839 Jy/beam ! Clean residual mean=0.000033 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.120702 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.120702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110738Jy sigma=0.000639 ! Fit after self-cal, rms=0.110732Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110732Jy sigma=0.000639 ! Fit after self-cal, rms=0.111092Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=18.9 mas, bpa=-24.25 degrees ! Estimated noise=1350.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.919e-05 Jy ! Component: 100 - total flux cleaned = 9.89896e-05 Jy ! Component: 150 - total flux cleaned = 9.96271e-05 Jy ! Component: 200 - total flux cleaned = 9.93576e-05 Jy ! Total flux subtracted in 200 components = 9.93576e-05 Jy ! Clean residual min=-0.003026 max=0.002830 Jy/beam ! Clean residual mean=0.000031 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.120802 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.120802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111072Jy sigma=0.000639 ! Fit after self-cal, rms=0.111077Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.53245e-06 Jy ! Component: 100 - total flux cleaned = -3.38567e-05 Jy ! Component: 150 - total flux cleaned = -5.81178e-05 Jy ! Component: 200 - total flux cleaned = -5.75382e-05 Jy ! Total flux subtracted in 200 components = -5.75382e-05 Jy ! Clean residual min=-0.003045 max=0.002786 Jy/beam ! Clean residual mean=0.000030 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.120744 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 105 components and 0.120744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111062Jy sigma=0.000639 ! Fit after self-cal, rms=0.111033Jy sigma=0.000638 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111033Jy sigma=0.000638 ! Fit after self-cal, rms=0.110996Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.954 mas, bmaj=34.98 mas, bpa=-13.92 degrees ! Estimated noise=1626.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.54606e-05 Jy ! Component: 100 - total flux cleaned = -2.36359e-05 Jy ! Component: 150 - total flux cleaned = -3.90008e-05 Jy ! Component: 200 - total flux cleaned = -5.22241e-05 Jy ! Total flux subtracted in 200 components = -5.22241e-05 Jy ! Clean residual min=-0.003284 max=0.002726 Jy/beam ! Clean residual mean=0.000050 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.120692 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 114 components and 0.120692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110994Jy sigma=0.000638 ! Fit after self-cal, rms=0.110992Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.33777e-06 Jy ! Component: 100 - total flux cleaned = -1.79506e-05 Jy ! Component: 150 - total flux cleaned = -5.23206e-05 Jy ! Component: 200 - total flux cleaned = -9.4381e-05 Jy ! Total flux subtracted in 200 components = -9.4381e-05 Jy ! Clean residual min=-0.003290 max=0.002728 Jy/beam ! Clean residual mean=0.000050 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.120598 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 123 components and 0.120598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110990Jy sigma=0.000638 ! Fit after self-cal, rms=0.110987Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=18.92 mas, bpa=-24.23 degrees ! Estimated noise=1348.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.161 x 18.92 at -24.23 degrees (North through East) ! Clean map min=-0.003047 max=0.092618 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=16.27 mas, bpa=-24.1 degrees ! Estimated noise=2681.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0750537 Jy ! Component: 100 - total flux cleaned = 0.0953465 Jy ! Component: 150 - total flux cleaned = 0.106301 Jy ! Component: 200 - total flux cleaned = 0.113064 Jy ! Total flux subtracted in 200 components = 0.113064 Jy ! Clean residual min=-0.007436 max=0.007083 Jy/beam ! Clean residual mean=-0.000005 rms=0.002142 Jy/beam ! Combined flux in latest and established models = 0.113064 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.113064 Jy ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=18.92 mas, bpa=-24.23 degrees ! Estimated noise=1348.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498014 Jy ! Component: 100 - total flux cleaned = 0.00574201 Jy ! Component: 150 - total flux cleaned = 0.0058727 Jy ! Component: 200 - total flux cleaned = 0.00603281 Jy ! Total flux subtracted in 200 components = 0.00603281 Jy ! Clean residual min=-0.003085 max=0.003007 Jy/beam ! Clean residual mean=0.000020 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.119097 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 49 components and 0.119097 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.954 mas, bmaj=34.98 mas, bpa=-13.92 degrees ! Estimated noise=1626.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251007 Jy ! Component: 100 - total flux cleaned = 0.000297496 Jy ! Component: 150 - total flux cleaned = 0.000316175 Jy ! Component: 200 - total flux cleaned = 0.000349591 Jy ! Total flux subtracted in 200 components = 0.000349591 Jy ! Clean residual min=-0.003403 max=0.002810 Jy/beam ! Clean residual mean=0.000039 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.119447 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68525e-05 Jy ! Component: 100 - total flux cleaned = 7.66921e-05 Jy ! Component: 150 - total flux cleaned = 0.000118737 Jy ! Component: 200 - total flux cleaned = 0.000158257 Jy ! Total flux subtracted in 200 components = 0.000158257 Jy ! Clean residual min=-0.003401 max=0.002804 Jy/beam ! Clean residual mean=0.000040 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.119605 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.119605 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=18.92 mas, bpa=-24.23 degrees ! Estimated noise=1348.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000347838 Jy ! Component: 100 - total flux cleaned = -0.000220408 Jy ! Component: 150 - total flux cleaned = -0.000184233 Jy ! Component: 200 - total flux cleaned = -0.000150401 Jy ! Total flux subtracted in 200 components = -0.000150401 Jy ! Clean residual min=-0.003172 max=0.002954 Jy/beam ! Clean residual mean=0.000022 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.119455 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.119455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111010Jy sigma=0.000639 ! Fit after self-cal, rms=0.110965Jy sigma=0.000638 wmodel J0603-3144_S_2017_10_09_pus_map.mod ! Writing 76 model components to file: J0603-3144_S_2017_10_09_pus_map.mod wobs J0603-3144_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0603-3144_S_2017_10_09_pus_uvs.fits wwins J0603-3144_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0603-3144_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000917739 Jy ! Component: 100 - total flux cleaned = -0.00111291 Jy ! Component: 150 - total flux cleaned = -0.00138136 Jy ! Component: 200 - total flux cleaned = -0.00167609 Jy ! Component: 250 - total flux cleaned = -0.00199517 Jy ! Component: 300 - total flux cleaned = -0.00218386 Jy ! Component: 350 - total flux cleaned = -0.00207468 Jy ! Component: 400 - total flux cleaned = -0.00200508 Jy ! Component: 450 - total flux cleaned = -0.00186876 Jy ! Component: 500 - total flux cleaned = -0.00186887 Jy ! Component: 550 - total flux cleaned = -0.0019004 Jy ! Component: 600 - total flux cleaned = -0.00193096 Jy ! Component: 650 - total flux cleaned = -0.00190107 Jy ! Component: 700 - total flux cleaned = -0.0019312 Jy ! Component: 750 - total flux cleaned = -0.00201862 Jy ! Component: 800 - total flux cleaned = -0.0020754 Jy ! Component: 850 - total flux cleaned = -0.00215874 Jy ! Component: 900 - total flux cleaned = -0.00218587 Jy ! Component: 950 - total flux cleaned = -0.00215925 Jy ! Component: 1000 - total flux cleaned = -0.00208018 Jy ! Component: 1050 - total flux cleaned = -0.00200316 Jy ! Component: 1100 - total flux cleaned = -0.00192726 Jy ! Component: 1150 - total flux cleaned = -0.0018285 Jy ! Component: 1200 - total flux cleaned = -0.0018043 Jy ! Component: 1250 - total flux cleaned = -0.00168487 Jy ! Component: 1300 - total flux cleaned = -0.00166164 Jy ! Component: 1350 - total flux cleaned = -0.00163859 Jy ! Component: 1400 - total flux cleaned = -0.00154695 Jy ! Component: 1450 - total flux cleaned = -0.00150223 Jy ! Component: 1500 - total flux cleaned = -0.00152461 Jy ! Component: 1550 - total flux cleaned = -0.00154607 Jy ! Component: 1600 - total flux cleaned = -0.00150238 Jy ! Component: 1650 - total flux cleaned = -0.00150224 Jy ! Component: 1700 - total flux cleaned = -0.00148106 Jy ! Component: 1750 - total flux cleaned = -0.00146011 Jy ! Component: 1800 - total flux cleaned = -0.00150125 Jy ! Component: 1850 - total flux cleaned = -0.00141981 Jy ! Component: 1900 - total flux cleaned = -0.00154064 Jy ! Component: 1950 - total flux cleaned = -0.00150065 Jy ! Component: 2000 - total flux cleaned = -0.00150101 Jy ! Component: 2050 - total flux cleaned = -0.00152081 Jy ! Component: 2100 - total flux cleaned = -0.00154016 Jy ! Component: 2150 - total flux cleaned = -0.00161631 Jy ! Component: 2200 - total flux cleaned = -0.00155979 Jy ! Component: 2250 - total flux cleaned = -0.00159735 Jy ! Component: 2300 - total flux cleaned = -0.00167115 Jy ! Component: 2350 - total flux cleaned = -0.00165284 Jy ! Component: 2400 - total flux cleaned = -0.00165282 Jy ! Component: 2450 - total flux cleaned = -0.00168856 Jy ! Component: 2500 - total flux cleaned = -0.00168876 Jy ! Component: 2550 - total flux cleaned = -0.00174147 Jy ! Component: 2600 - total flux cleaned = -0.00174146 Jy ! Component: 2650 - total flux cleaned = -0.00174129 Jy ! Component: 2700 - total flux cleaned = -0.00174117 Jy ! Component: 2750 - total flux cleaned = -0.00174113 Jy ! Component: 2800 - total flux cleaned = -0.00174119 Jy ! Component: 2850 - total flux cleaned = -0.00174132 Jy ! Component: 2900 - total flux cleaned = -0.00174124 Jy ! Component: 2950 - total flux cleaned = -0.00174133 Jy ! Component: 3000 - total flux cleaned = -0.00170915 Jy ! Component: 3050 - total flux cleaned = -0.00166113 Jy ! Component: 3100 - total flux cleaned = -0.00166094 Jy ! Component: 3150 - total flux cleaned = -0.00161365 Jy ! Component: 3200 - total flux cleaned = -0.00155125 Jy ! Component: 3250 - total flux cleaned = -0.00155122 Jy ! Component: 3300 - total flux cleaned = -0.00158178 Jy ! Component: 3350 - total flux cleaned = -0.00156645 Jy ! Component: 3400 - total flux cleaned = -0.00147554 Jy ! Component: 3450 - total flux cleaned = -0.00144552 Jy ! Component: 3500 - total flux cleaned = -0.00143079 Jy ! Component: 3550 - total flux cleaned = -0.00138635 Jy ! Component: 3600 - total flux cleaned = -0.00138631 Jy ! Component: 3650 - total flux cleaned = -0.00132807 Jy ! Component: 3700 - total flux cleaned = -0.00127019 Jy ! Component: 3750 - total flux cleaned = -0.00129909 Jy ! Component: 3800 - total flux cleaned = -0.00124177 Jy ! Component: 3850 - total flux cleaned = -0.00124177 Jy ! Component: 3900 - total flux cleaned = -0.00122749 Jy ! Component: 3950 - total flux cleaned = -0.00118504 Jy ! Component: 4000 - total flux cleaned = -0.00118504 Jy ! Component: 4050 - total flux cleaned = -0.00115695 Jy ! Total flux subtracted in 4096 components = -0.00111522 Jy ! Clean residual min=-0.000750 max=0.000813 Jy/beam ! Clean residual mean=-0.000001 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.118339 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 318 components and 0.118339 Jy ![Exited script file: muppet] wmap "J0603-3144_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.161 x 18.92 at -24.23 degrees (North through East) ! Clean map min=-0.0024459 max=0.094452 Jy/beam ! Writing clean map to FITS file: J0603-3144_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0944523 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000256596 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.815002 0.815002 1.63 3.26001 6.52002 13.04 26.0801 52.1601 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.161 x 18.92 at -24.23 degrees (North through East) ! Clean map min=-0.0024459 max=0.094452 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0603-3144_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:06:10 2019