! Started logfile: J0603-1716_S_2017_04_28_pus_uvs.log on Thu May 2 16:18:23 2019 obs J0603-1716_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0603-1716_S_2017_04_28_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.967836 visibilities/baseline/integration-bin. ! Found source: J0603-1716 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13240 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0603-1716_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.810587Jy sigma=0.079938 ! Fit after self-cal, rms=0.799259Jy sigma=0.079920 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=8.862 mas, bpa=-7.977 degrees ! Estimated noise=581.785 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0554721 Jy ! Component: 100 - total flux cleaned = 0.0512917 Jy ! Total flux subtracted in 100 components = 0.0512917 Jy ! Clean residual min=-0.038635 max=0.041598 Jy/beam ! Clean residual mean=0.000068 rms=0.016928 Jy/beam ! Combined flux in latest and established models = 0.0512916 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0512916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218235Jy sigma=0.004434 ! Fit after self-cal, rms=0.218170Jy sigma=0.004413 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.209 mas, bmaj=9.538 mas, bpa=-6.465 degrees ! Estimated noise=500.396 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245089 Jy ! Component: 100 - total flux cleaned = 0.0227651 Jy ! Component: 150 - total flux cleaned = 0.0236956 Jy ! Component: 200 - total flux cleaned = 0.0245489 Jy ! Total flux subtracted in 200 components = 0.0245489 Jy ! Clean residual min=-0.044127 max=0.047034 Jy/beam ! Clean residual mean=0.000117 rms=0.017975 Jy/beam ! Combined flux in latest and established models = 0.0758405 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.0758405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197713Jy sigma=0.006187 ! Fit after self-cal, rms=0.197731Jy sigma=0.006186 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.55 FD 0.57 HN 0.89 KP 0.57 ! LA 0.58 MK 1.10 NL 0.62 OV 0.62 ! PT 0.63 SC 1.13 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.59 FD 0.51 HN 0.92 KP 0.57 ! LA 0.55 MK 1.08 NL 0.72 OV 0.64 ! PT 0.62 SC 1.18 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.59 FD 0.55 HN 0.90 KP 0.58 ! LA 0.57 MK 1.29 NL 0.67 OV 0.57 ! PT 0.60 SC 1.18 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 8.99 FD 0.59 HN 1.16 KP 1.00* ! LA 24.68 MK 1.56 NL 1.00* OV 1.00* ! PT 0.65 SC 1.00* ! ! ! Fit before self-cal, rms=0.197731Jy sigma=0.006186 ! Fit after self-cal, rms=5.787903Jy sigma=0.000752 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.969 mas, bmaj=9.646 mas, bpa=-0.8723 degrees ! Estimated noise=522.199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-38.5, 36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679611 Jy ! Component: 100 - total flux cleaned = 0.0083406 Jy ! Component: 150 - total flux cleaned = 0.00863331 Jy ! Component: 200 - total flux cleaned = 0.00876876 Jy ! Total flux subtracted in 200 components = 0.00876876 Jy ! Clean residual min=-0.003903 max=0.005867 Jy/beam ! Clean residual mean=0.000001 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.0846093 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.0846092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.787245Jy sigma=0.000748 ! Fit after self-cal, rms=5.787900Jy sigma=0.000734 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.787900Jy sigma=0.000734 ! Fit after self-cal, rms=0.103262Jy sigma=0.000697 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=9.487 mas, bpa=-1.831 degrees ! Estimated noise=520.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280218 Jy ! Component: 100 - total flux cleaned = 0.0028012 Jy ! Component: 150 - total flux cleaned = 0.00270246 Jy ! Component: 200 - total flux cleaned = 0.00270392 Jy ! Total flux subtracted in 200 components = 0.00270392 Jy ! Clean residual min=-0.002460 max=0.003145 Jy/beam ! Clean residual mean=0.000003 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.0873132 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.0873132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102878Jy sigma=0.000693 ! Fit after self-cal, rms=0.102724Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.16026e-06 Jy ! Component: 100 - total flux cleaned = 7.74145e-05 Jy ! Component: 150 - total flux cleaned = 7.56069e-05 Jy ! Component: 200 - total flux cleaned = 7.47516e-05 Jy ! Total flux subtracted in 200 components = 7.47516e-05 Jy ! Clean residual min=-0.002446 max=0.003108 Jy/beam ! Clean residual mean=0.000003 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.0873879 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.0873879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102435Jy sigma=0.000690 ! Fit after self-cal, rms=0.102427Jy sigma=0.000690 ! Inverting map ! Added new window around map position (25, -116). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171069 Jy ! Component: 100 - total flux cleaned = 0.00178936 Jy ! Component: 150 - total flux cleaned = 0.00194036 Jy ! Component: 200 - total flux cleaned = 0.0019425 Jy ! Total flux subtracted in 200 components = 0.0019425 Jy ! Clean residual min=-0.002289 max=0.002888 Jy/beam ! Clean residual mean=0.000001 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0893304 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 64 components and 0.0893304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102177Jy sigma=0.000688 ! Fit after self-cal, rms=0.102148Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102148Jy sigma=0.000688 ! Fit after self-cal, rms=0.102833Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.848 mas, bmaj=9.435 mas, bpa=-1.589 degrees ! Estimated noise=524.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262403 Jy ! Component: 100 - total flux cleaned = 0.00269951 Jy ! Component: 150 - total flux cleaned = 0.00262899 Jy ! Component: 200 - total flux cleaned = 0.0025651 Jy ! Total flux subtracted in 200 components = 0.0025651 Jy ! Clean residual min=-0.001980 max=0.002630 Jy/beam ! Clean residual mean=0.000001 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0918955 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.0918955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102615Jy sigma=0.000684 ! Fit after self-cal, rms=0.102583Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (98, 119.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119659 Jy ! Component: 100 - total flux cleaned = 0.00138488 Jy ! Component: 150 - total flux cleaned = 0.00138641 Jy ! Component: 200 - total flux cleaned = 0.0013876 Jy ! Total flux subtracted in 200 components = 0.0013876 Jy ! Clean residual min=-0.001962 max=0.002310 Jy/beam ! Clean residual mean=-0.000001 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0932831 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 78 components and 0.0932831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102396Jy sigma=0.000683 ! Fit after self-cal, rms=0.102379Jy sigma=0.000683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102379Jy sigma=0.000683 ! Fit after self-cal, rms=0.102895Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.151 mas, bmaj=16.87 mas, bpa=2.581 degrees ! Estimated noise=552.589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00095904 Jy ! Component: 100 - total flux cleaned = 0.000784726 Jy ! Component: 150 - total flux cleaned = 0.000784378 Jy ! Component: 200 - total flux cleaned = 0.000782344 Jy ! Total flux subtracted in 200 components = 0.000782344 Jy ! Clean residual min=-0.001722 max=0.001704 Jy/beam ! Clean residual mean=-0.000002 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0940655 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.0940655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102872Jy sigma=0.000681 ! Fit after self-cal, rms=0.102845Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.99445e-05 Jy ! Component: 100 - total flux cleaned = -3.04735e-05 Jy ! Component: 150 - total flux cleaned = -3.01683e-05 Jy ! Component: 200 - total flux cleaned = -6.84523e-06 Jy ! Total flux subtracted in 200 components = -6.84523e-06 Jy ! Clean residual min=-0.001699 max=0.001776 Jy/beam ! Clean residual mean=-0.000001 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0940586 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 0.0940586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102835Jy sigma=0.000681 ! Fit after self-cal, rms=0.102832Jy sigma=0.000681 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=9.383 mas, bpa=-1.421 degrees ! Estimated noise=526.933 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.808 x 9.383 at -1.421 degrees (North through East) ! Clean map min=-0.0042178 max=0.10696 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=8.042 mas, bpa=-2.961 degrees ! Estimated noise=802.779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0860704 Jy ! Component: 100 - total flux cleaned = 0.098522 Jy ! Component: 150 - total flux cleaned = 0.0965601 Jy ! Component: 200 - total flux cleaned = 0.0953078 Jy ! Total flux subtracted in 200 components = 0.0953078 Jy ! Clean residual min=-0.004656 max=0.004479 Jy/beam ! Clean residual mean=0.000004 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.0953078 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0953078 Jy ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=9.383 mas, bpa=-1.421 degrees ! Estimated noise=526.933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0022849 Jy ! Component: 100 - total flux cleaned = -0.00151777 Jy ! Component: 150 - total flux cleaned = -0.000731159 Jy ! Component: 200 - total flux cleaned = -0.000169145 Jy ! Total flux subtracted in 200 components = -0.000169145 Jy ! Clean residual min=-0.002549 max=0.002596 Jy/beam ! Clean residual mean=0.000000 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0951386 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.0951386 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.151 mas, bmaj=16.87 mas, bpa=2.581 degrees ! Estimated noise=552.589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123318 Jy ! Component: 100 - total flux cleaned = -0.00160696 Jy ! Component: 150 - total flux cleaned = -0.00171647 Jy ! Component: 200 - total flux cleaned = -0.00181516 Jy ! Total flux subtracted in 200 components = -0.00181516 Jy ! Clean residual min=-0.001846 max=0.001948 Jy/beam ! Clean residual mean=-0.000003 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0933235 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133452 Jy ! Component: 100 - total flux cleaned = -0.000174742 Jy ! Component: 150 - total flux cleaned = -0.00021262 Jy ! Component: 200 - total flux cleaned = -0.000212601 Jy ! Total flux subtracted in 200 components = -0.000212601 Jy ! Clean residual min=-0.001770 max=0.001976 Jy/beam ! Clean residual mean=-0.000004 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0931109 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 66 components and 0.0931109 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=9.383 mas, bpa=-1.421 degrees ! Estimated noise=526.933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613248 Jy ! Component: 100 - total flux cleaned = 0.000688728 Jy ! Component: 150 - total flux cleaned = 0.000827419 Jy ! Component: 200 - total flux cleaned = 0.000956658 Jy ! Total flux subtracted in 200 components = 0.000956658 Jy ! Clean residual min=-0.002057 max=0.002227 Jy/beam ! Clean residual mean=-0.000002 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0940675 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 0.0940675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102677Jy sigma=0.000682 ! Fit after self-cal, rms=0.102672Jy sigma=0.000682 wmodel J0603-1716_S_2017_04_28_pus_map.mod ! Writing 86 model components to file: J0603-1716_S_2017_04_28_pus_map.mod wobs J0603-1716_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0603-1716_S_2017_04_28_pus_uvs.fits wwins J0603-1716_S_2017_04_28_pus_map.win ! wwins: Wrote 4 windows to J0603-1716_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000762788 Jy ! Component: 100 - total flux cleaned = 0.00135429 Jy ! Component: 150 - total flux cleaned = 0.00191326 Jy ! Component: 200 - total flux cleaned = 0.00248194 Jy ! Component: 250 - total flux cleaned = 0.00290168 Jy ! Component: 300 - total flux cleaned = 0.00330838 Jy ! Component: 350 - total flux cleaned = 0.00373344 Jy ! Component: 400 - total flux cleaned = 0.00399949 Jy ! Component: 450 - total flux cleaned = 0.00431684 Jy ! Component: 500 - total flux cleaned = 0.00459895 Jy ! Component: 550 - total flux cleaned = 0.00479297 Jy ! Component: 600 - total flux cleaned = 0.00506568 Jy ! Component: 650 - total flux cleaned = 0.00530571 Jy ! Component: 700 - total flux cleaned = 0.00554129 Jy ! Component: 750 - total flux cleaned = 0.00567039 Jy ! Component: 800 - total flux cleaned = 0.00594952 Jy ! Component: 850 - total flux cleaned = 0.00614924 Jy ! Component: 900 - total flux cleaned = 0.00646841 Jy ! Component: 950 - total flux cleaned = 0.00668635 Jy ! Component: 1000 - total flux cleaned = 0.00694905 Jy ! Component: 1050 - total flux cleaned = 0.00725526 Jy ! Component: 1100 - total flux cleaned = 0.00751093 Jy ! Component: 1150 - total flux cleaned = 0.00771708 Jy ! Component: 1200 - total flux cleaned = 0.00794375 Jy ! Component: 1250 - total flux cleaned = 0.00825638 Jy ! Component: 1300 - total flux cleaned = 0.00852117 Jy ! Component: 1350 - total flux cleaned = 0.00880428 Jy ! Component: 1400 - total flux cleaned = 0.00908376 Jy ! Component: 1450 - total flux cleaned = 0.00929647 Jy ! Component: 1500 - total flux cleaned = 0.00956973 Jy ! Component: 1550 - total flux cleaned = 0.0099228 Jy ! Component: 1600 - total flux cleaned = 0.0102101 Jy ! Component: 1650 - total flux cleaned = 0.0104738 Jy ! Component: 1700 - total flux cleaned = 0.0106743 Jy ! Component: 1750 - total flux cleaned = 0.0109525 Jy ! Component: 1800 - total flux cleaned = 0.0112866 Jy ! Component: 1850 - total flux cleaned = 0.0115782 Jy ! Component: 1900 - total flux cleaned = 0.0118476 Jy ! Component: 1950 - total flux cleaned = 0.012076 Jy ! Component: 2000 - total flux cleaned = 0.0123962 Jy ! Component: 2050 - total flux cleaned = 0.0125456 Jy ! Component: 2100 - total flux cleaned = 0.0128229 Jy ! Component: 2150 - total flux cleaned = 0.0130791 Jy ! Component: 2200 - total flux cleaned = 0.0133869 Jy ! Component: 2250 - total flux cleaned = 0.0135661 Jy ! Component: 2300 - total flux cleaned = 0.0138148 Jy ! Component: 2350 - total flux cleaned = 0.0140613 Jy ! Component: 2400 - total flux cleaned = 0.0143055 Jy ! Component: 2450 - total flux cleaned = 0.0145127 Jy ! Component: 2500 - total flux cleaned = 0.0147524 Jy ! Component: 2550 - total flux cleaned = 0.0149561 Jy ! Component: 2600 - total flux cleaned = 0.0151747 Jy ! Component: 2650 - total flux cleaned = 0.0153581 Jy ! Component: 2700 - total flux cleaned = 0.015573 Jy ! Component: 2750 - total flux cleaned = 0.0158025 Jy ! Component: 2800 - total flux cleaned = 0.0159648 Jy ! Component: 2850 - total flux cleaned = 0.0161421 Jy ! Component: 2900 - total flux cleaned = 0.0163179 Jy ! Component: 2950 - total flux cleaned = 0.0165558 Jy ! Component: 3000 - total flux cleaned = 0.0167133 Jy ! Component: 3050 - total flux cleaned = 0.0169163 Jy ! Component: 3100 - total flux cleaned = 0.017102 Jy ! Component: 3150 - total flux cleaned = 0.0172558 Jy ! Component: 3200 - total flux cleaned = 0.0173933 Jy ! Component: 3250 - total flux cleaned = 0.0175902 Jy ! Component: 3300 - total flux cleaned = 0.0177854 Jy ! Component: 3350 - total flux cleaned = 0.0179196 Jy ! Component: 3400 - total flux cleaned = 0.0180823 Jy ! Component: 3450 - total flux cleaned = 0.0181852 Jy ! Component: 3500 - total flux cleaned = 0.0183897 Jy ! Component: 3550 - total flux cleaned = 0.0185203 Jy ! Component: 3600 - total flux cleaned = 0.0186933 Jy ! Component: 3650 - total flux cleaned = 0.0188364 Jy ! Component: 3700 - total flux cleaned = 0.0189645 Jy ! Component: 3750 - total flux cleaned = 0.0191479 Jy ! Component: 3800 - total flux cleaned = 0.0192881 Jy ! Component: 3850 - total flux cleaned = 0.0193857 Jy ! Component: 3900 - total flux cleaned = 0.019524 Jy ! Component: 3950 - total flux cleaned = 0.019689 Jy ! Component: 4000 - total flux cleaned = 0.0198392 Jy ! Component: 4050 - total flux cleaned = 0.0199884 Jy ! Total flux subtracted in 4096 components = 0.0200693 Jy ! Clean residual min=-0.000807 max=0.000732 Jy/beam ! Clean residual mean=0.000002 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.114137 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 352 components and 0.114137 Jy ![Exited script file: muppet] wmap "J0603-1716_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.808 x 9.383 at -1.421 degrees (North through East) ! Clean map min=-0.002391 max=0.10764 Jy/beam ! Writing clean map to FITS file: J0603-1716_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107643 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000239469 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.667398 0.667398 1.3348 2.66959 5.33919 10.6784 21.3567 42.7135 85.427 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.808 x 9.383 at -1.421 degrees (North through East) ! Clean map min=-0.002391 max=0.10764 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0603-1716_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:18:28 2019