! Started logfile: J0603+2159_S_2017_05_01_pus_uvs.log on Wed May 1 18:28:44 2019 obs J0603+2159_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0603+2159_S_2017_05_01_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.914451 visibilities/baseline/integration-bin. ! Found source: J0603+2159 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 28476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0603+2159_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 764 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911562Jy sigma=0.007921 ! Fit after self-cal, rms=0.900391Jy sigma=0.007824 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=6.288 mas, bpa=-4.05 degrees ! Estimated noise=926.221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0733908 Jy ! Component: 100 - total flux cleaned = 0.100964 Jy ! Total flux subtracted in 100 components = 0.100964 Jy ! Clean residual min=-0.012562 max=0.016952 Jy/beam ! Clean residual mean=-0.000139 rms=0.004266 Jy/beam ! Combined flux in latest and established models = 0.100964 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.100964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144378Jy sigma=0.001224 ! Fit after self-cal, rms=0.144186Jy sigma=0.001220 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=6.974 mas, bpa=-3.863 degrees ! Estimated noise=536.627 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353706 Jy ! Component: 100 - total flux cleaned = 0.0584503 Jy ! Component: 150 - total flux cleaned = 0.0741342 Jy ! Component: 200 - total flux cleaned = 0.0849576 Jy ! Total flux subtracted in 200 components = 0.0849576 Jy ! Clean residual min=-0.018530 max=0.021584 Jy/beam ! Clean residual mean=-0.000165 rms=0.006377 Jy/beam ! Combined flux in latest and established models = 0.185922 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 77 components and 0.185922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133355Jy sigma=0.001132 ! Fit after self-cal, rms=0.132968Jy sigma=0.001126 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.93 HN 1.27 KP 1.19 ! LA 0.67 MK 0.96 NL 1.81 OV 1.22 ! PT 0.73 SC 1.20 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.94 HN 1.28 KP 1.15 ! LA 0.68 MK 0.95 NL 1.65 OV 1.20 ! PT 0.73 SC 1.22 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.91 HN 1.13 KP 1.08 ! LA 0.89 MK 0.91 NL 1.54 OV 1.04 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.79 FD 1.10 HN 1.22 KP 1.00* ! LA 0.67 MK 1.04 NL 1.00* OV 1.00* ! PT 0.68 SC 1.00* ! ! ! Fit before self-cal, rms=0.132968Jy sigma=0.001126 ! Fit after self-cal, rms=0.137725Jy sigma=0.001068 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.574 mas, bmaj=7.382 mas, bpa=-4.825 degrees ! Estimated noise=571.731 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00441377 Jy ! Component: 100 - total flux cleaned = 0.0041423 Jy ! Component: 150 - total flux cleaned = 0.00383361 Jy ! Component: 200 - total flux cleaned = 0.00363007 Jy ! Total flux subtracted in 200 components = 0.00363007 Jy ! Clean residual min=-0.020779 max=0.019392 Jy/beam ! Clean residual mean=-0.000157 rms=0.005729 Jy/beam ! Combined flux in latest and established models = 0.189552 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 81 components and 0.189552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137231Jy sigma=0.001069 ! Fit after self-cal, rms=0.140067Jy sigma=0.001060 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140067Jy sigma=0.001060 ! Fit after self-cal, rms=0.284620Jy sigma=0.000936 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.691 mas, bmaj=7.739 mas, bpa=-5.446 degrees ! Estimated noise=653.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00793717 Jy ! Component: 100 - total flux cleaned = 0.00697447 Jy ! Component: 150 - total flux cleaned = 0.00629789 Jy ! Component: 200 - total flux cleaned = 0.00582785 Jy ! Total flux subtracted in 200 components = 0.00582785 Jy ! Clean residual min=-0.014933 max=0.020542 Jy/beam ! Clean residual mean=-0.000024 rms=0.004461 Jy/beam ! Combined flux in latest and established models = 0.19538 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.19538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283512Jy sigma=0.000937 ! Fit after self-cal, rms=0.291455Jy sigma=0.000927 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00232849 Jy ! Component: 100 - total flux cleaned = -0.00247399 Jy ! Component: 150 - total flux cleaned = -0.00253736 Jy ! Component: 200 - total flux cleaned = -0.00259178 Jy ! Total flux subtracted in 200 components = -0.00259178 Jy ! Clean residual min=-0.014691 max=0.018358 Jy/beam ! Clean residual mean=-0.000030 rms=0.004516 Jy/beam ! Combined flux in latest and established models = 0.192788 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 86 components and 0.192788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291403Jy sigma=0.000927 ! Fit after self-cal, rms=0.291431Jy sigma=0.000927 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291431Jy sigma=0.000927 ! Fit after self-cal, rms=0.429770Jy sigma=0.000923 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.776 mas, bmaj=7.955 mas, bpa=-5.77 degrees ! Estimated noise=690.584 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239175 Jy ! Component: 100 - total flux cleaned = 0.00163115 Jy ! Component: 150 - total flux cleaned = 0.000992861 Jy ! Component: 200 - total flux cleaned = 0.000438128 Jy ! Total flux subtracted in 200 components = 0.000438128 Jy ! Clean residual min=-0.015325 max=0.019481 Jy/beam ! Clean residual mean=-0.000024 rms=0.004642 Jy/beam ! Combined flux in latest and established models = 0.193226 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 90 components and 0.193226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429475Jy sigma=0.000924 ! Fit after self-cal, rms=0.431592Jy sigma=0.000923 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24.5, 20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175 Jy ! Component: 100 - total flux cleaned = 0.0217994 Jy ! Component: 150 - total flux cleaned = 0.0238987 Jy ! Component: 200 - total flux cleaned = 0.0253836 Jy ! Total flux subtracted in 200 components = 0.0253836 Jy ! Clean residual min=-0.015514 max=0.016891 Jy/beam ! Clean residual mean=-0.000041 rms=0.004348 Jy/beam ! Combined flux in latest and established models = 0.21861 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 111 components and 0.218609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429792Jy sigma=0.000906 ! Fit after self-cal, rms=0.429322Jy sigma=0.000900 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429322Jy sigma=0.000900 ! Fit after self-cal, rms=0.390407Jy sigma=0.000895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.065 mas, bmaj=11.86 mas, bpa=-6.45 degrees ! Estimated noise=714.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128848 Jy ! Component: 100 - total flux cleaned = 0.0180946 Jy ! Component: 150 - total flux cleaned = 0.0191237 Jy ! Component: 200 - total flux cleaned = 0.0192612 Jy ! Total flux subtracted in 200 components = 0.0192612 Jy ! Clean residual min=-0.019987 max=0.021691 Jy/beam ! Clean residual mean=-0.000043 rms=0.006076 Jy/beam ! Combined flux in latest and established models = 0.237871 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 128 components and 0.237871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.390011Jy sigma=0.000887 ! Fit after self-cal, rms=0.389810Jy sigma=0.000884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00616638 Jy ! Component: 100 - total flux cleaned = 0.00737198 Jy ! Component: 150 - total flux cleaned = 0.00747899 Jy ! Component: 200 - total flux cleaned = 0.0073753 Jy ! Total flux subtracted in 200 components = 0.0073753 Jy ! Clean residual min=-0.018653 max=0.022132 Jy/beam ! Clean residual mean=-0.000034 rms=0.005963 Jy/beam ! Combined flux in latest and established models = 0.245246 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 137 components and 0.245246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389637Jy sigma=0.000882 ! Fit after self-cal, rms=0.389611Jy sigma=0.000882 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.819 mas, bmaj=8.002 mas, bpa=-6.1 degrees ! Estimated noise=689.934 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.819 x 8.002 at -6.1 degrees (North through East) ! Clean map min=-0.014709 max=0.12156 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=7.057 mas, bpa=-6.41 degrees ! Estimated noise=1262.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.091774 Jy ! Component: 100 - total flux cleaned = 0.126964 Jy ! Component: 150 - total flux cleaned = 0.150329 Jy ! Component: 200 - total flux cleaned = 0.167401 Jy ! Total flux subtracted in 200 components = 0.167401 Jy ! Clean residual min=-0.014734 max=0.016433 Jy/beam ! Clean residual mean=-0.000051 rms=0.004042 Jy/beam ! Combined flux in latest and established models = 0.167401 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.167401 Jy ! Inverting map and beam ! Estimated beam: bmin=3.819 mas, bmaj=8.002 mas, bpa=-6.1 degrees ! Estimated noise=689.934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200845 Jy ! Component: 100 - total flux cleaned = 0.0343579 Jy ! Component: 150 - total flux cleaned = 0.0448777 Jy ! Component: 200 - total flux cleaned = 0.0501597 Jy ! Total flux subtracted in 200 components = 0.0501597 Jy ! Clean residual min=-0.015066 max=0.017205 Jy/beam ! Clean residual mean=-0.000042 rms=0.004326 Jy/beam ! Combined flux in latest and established models = 0.217561 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 52 components and 0.217561 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.065 mas, bmaj=11.86 mas, bpa=-6.45 degrees ! Estimated noise=714.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118373 Jy ! Component: 100 - total flux cleaned = 0.0163032 Jy ! Component: 150 - total flux cleaned = 0.0189666 Jy ! Component: 200 - total flux cleaned = 0.0209542 Jy ! Total flux subtracted in 200 components = 0.0209542 Jy ! Clean residual min=-0.018971 max=0.021180 Jy/beam ! Clean residual mean=-0.000040 rms=0.006031 Jy/beam ! Combined flux in latest and established models = 0.238515 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000931824 Jy ! Component: 100 - total flux cleaned = 0.00176589 Jy ! Component: 150 - total flux cleaned = 0.00239401 Jy ! Component: 200 - total flux cleaned = 0.00307987 Jy ! Total flux subtracted in 200 components = 0.00307987 Jy ! Clean residual min=-0.018906 max=0.021695 Jy/beam ! Clean residual mean=-0.000035 rms=0.005986 Jy/beam ! Combined flux in latest and established models = 0.241595 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 80 components and 0.241595 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.819 mas, bmaj=8.002 mas, bpa=-6.1 degrees ! Estimated noise=689.934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165047 Jy ! Component: 100 - total flux cleaned = 0.00152137 Jy ! Component: 150 - total flux cleaned = 0.0014049 Jy ! Component: 200 - total flux cleaned = 0.00140711 Jy ! Total flux subtracted in 200 components = 0.00140711 Jy ! Clean residual min=-0.014223 max=0.015864 Jy/beam ! Clean residual mean=-0.000022 rms=0.004053 Jy/beam ! Combined flux in latest and established models = 0.243002 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.243002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388897Jy sigma=0.000883 ! Fit after self-cal, rms=0.388691Jy sigma=0.000882 wmodel J0603+2159_S_2017_05_01_pus_map.mod ! Writing 96 model components to file: J0603+2159_S_2017_05_01_pus_map.mod wobs J0603+2159_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0603+2159_S_2017_05_01_pus_uvs.fits wwins J0603+2159_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J0603+2159_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00521671 Jy ! Component: 100 - total flux cleaned = 0.00679101 Jy ! Component: 150 - total flux cleaned = 0.0092721 Jy ! Component: 200 - total flux cleaned = 0.0116534 Jy ! Component: 250 - total flux cleaned = 0.0139566 Jy ! Component: 300 - total flux cleaned = 0.0157524 Jy ! Component: 350 - total flux cleaned = 0.0179366 Jy ! Component: 400 - total flux cleaned = 0.0194259 Jy ! Component: 450 - total flux cleaned = 0.0212962 Jy ! Component: 500 - total flux cleaned = 0.0237299 Jy ! Component: 550 - total flux cleaned = 0.0255169 Jy ! Component: 600 - total flux cleaned = 0.0274611 Jy ! Component: 650 - total flux cleaned = 0.0287951 Jy ! Component: 700 - total flux cleaned = 0.0302962 Jy ! Component: 750 - total flux cleaned = 0.0317717 Jy ! Component: 800 - total flux cleaned = 0.0337696 Jy ! Component: 850 - total flux cleaned = 0.0359108 Jy ! Component: 900 - total flux cleaned = 0.0373144 Jy ! Component: 950 - total flux cleaned = 0.0392151 Jy ! Component: 1000 - total flux cleaned = 0.0405746 Jy ! Component: 1050 - total flux cleaned = 0.0424232 Jy ! Component: 1100 - total flux cleaned = 0.0440795 Jy ! Component: 1150 - total flux cleaned = 0.0457099 Jy ! Component: 1200 - total flux cleaned = 0.0468363 Jy ! Component: 1250 - total flux cleaned = 0.0485845 Jy ! Component: 1300 - total flux cleaned = 0.049838 Jy ! Component: 1350 - total flux cleaned = 0.0512306 Jy ! Component: 1400 - total flux cleaned = 0.0524542 Jy ! Component: 1450 - total flux cleaned = 0.0536629 Jy ! Component: 1500 - total flux cleaned = 0.0547067 Jy ! Component: 1550 - total flux cleaned = 0.0555921 Jy ! Component: 1600 - total flux cleaned = 0.0566111 Jy ! Component: 1650 - total flux cleaned = 0.0579062 Jy ! Component: 1700 - total flux cleaned = 0.0590449 Jy ! Component: 1750 - total flux cleaned = 0.060027 Jy ! Component: 1800 - total flux cleaned = 0.0607204 Jy ! Component: 1850 - total flux cleaned = 0.0609967 Jy ! Component: 1900 - total flux cleaned = 0.062357 Jy ! Component: 1950 - total flux cleaned = 0.063028 Jy ! Component: 2000 - total flux cleaned = 0.0635604 Jy ! Component: 2050 - total flux cleaned = 0.0646142 Jy ! Component: 2100 - total flux cleaned = 0.0653942 Jy ! Component: 2150 - total flux cleaned = 0.0660397 Jy ! Component: 2200 - total flux cleaned = 0.0666776 Jy ! Component: 2250 - total flux cleaned = 0.066804 Jy ! Component: 2300 - total flux cleaned = 0.0668049 Jy ! Component: 2350 - total flux cleaned = 0.0673031 Jy ! Component: 2400 - total flux cleaned = 0.0681653 Jy ! Component: 2450 - total flux cleaned = 0.0682875 Jy ! Component: 2500 - total flux cleaned = 0.0686507 Jy ! Component: 2550 - total flux cleaned = 0.0692515 Jy ! Component: 2600 - total flux cleaned = 0.06949 Jy ! Component: 2650 - total flux cleaned = 0.0699632 Jy ! Component: 2700 - total flux cleaned = 0.0699631 Jy ! Component: 2750 - total flux cleaned = 0.0705467 Jy ! Component: 2800 - total flux cleaned = 0.0707774 Jy ! Component: 2850 - total flux cleaned = 0.071351 Jy ! Component: 2900 - total flux cleaned = 0.0713515 Jy ! Component: 2950 - total flux cleaned = 0.0718042 Jy ! Component: 3000 - total flux cleaned = 0.0722532 Jy ! Component: 3050 - total flux cleaned = 0.0725868 Jy ! Component: 3100 - total flux cleaned = 0.0731398 Jy ! Component: 3150 - total flux cleaned = 0.0734686 Jy ! Component: 3200 - total flux cleaned = 0.0735778 Jy ! Component: 3250 - total flux cleaned = 0.0741205 Jy ! Component: 3300 - total flux cleaned = 0.0741202 Jy ! Component: 3350 - total flux cleaned = 0.0744423 Jy ! Component: 3400 - total flux cleaned = 0.075186 Jy ! Component: 3450 - total flux cleaned = 0.0750807 Jy ! Component: 3500 - total flux cleaned = 0.0753945 Jy ! Component: 3550 - total flux cleaned = 0.0756029 Jy ! Component: 3600 - total flux cleaned = 0.0760165 Jy ! Component: 3650 - total flux cleaned = 0.076531 Jy ! Component: 3700 - total flux cleaned = 0.0767339 Jy ! Component: 3750 - total flux cleaned = 0.0769361 Jy ! Component: 3800 - total flux cleaned = 0.0771371 Jy ! Component: 3850 - total flux cleaned = 0.0775364 Jy ! Component: 3900 - total flux cleaned = 0.077836 Jy ! Component: 3950 - total flux cleaned = 0.0784301 Jy ! Component: 4000 - total flux cleaned = 0.0787254 Jy ! Component: 4050 - total flux cleaned = 0.0791159 Jy ! Total flux subtracted in 4096 components = 0.0790183 Jy ! Clean residual min=-0.005463 max=0.006323 Jy/beam ! Clean residual mean=-0.000011 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 0.32202 Jy keep ! Adding 350 model components to the UV plane model. ! The established model now contains 446 components and 0.32202 Jy ![Exited script file: muppet] wmap "J0603+2159_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.819 x 8.002 at -6.1 degrees (North through East) ! Clean map min=-0.013571 max=0.12371 Jy/beam ! Writing clean map to FITS file: J0603+2159_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123706 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00196235 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.7589 4.7589 9.5178 19.0356 38.0712 76.1424 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0058 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.819 x 8.002 at -6.1 degrees (North through East) ! Clean map min=-0.013571 max=0.12371 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0603+2159_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:28:50 2019