! Started logfile: J0603+1742_S_2017_09_26_pus_uvs.log on Sat May 11 12:55:09 2019 obs J0603+1742_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0603+1742_S_2017_09_26_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.635684 visibilities/baseline/integration-bin. ! Found source: J0603+1742 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 2380 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0603+1742_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.698547Jy sigma=0.006566 ! Fit after self-cal, rms=0.695605Jy sigma=0.006540 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=11.62 mas, bpa=-10.73 degrees ! Estimated noise=2205.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.240555 Jy ! Component: 100 - total flux cleaned = 0.29373 Jy ! Total flux subtracted in 100 components = 0.29373 Jy ! Clean residual min=-0.017514 max=0.018848 Jy/beam ! Clean residual mean=-0.000092 rms=0.004853 Jy/beam ! Combined flux in latest and established models = 0.29373 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.29373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096513Jy sigma=0.000848 ! Fit after self-cal, rms=0.096518Jy sigma=0.000847 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.479 mas, bmaj=11.67 mas, bpa=-10.72 degrees ! Estimated noise=1737.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227754 Jy ! Component: 100 - total flux cleaned = 0.0350939 Jy ! Component: 150 - total flux cleaned = 0.040183 Jy ! Component: 200 - total flux cleaned = 0.0417688 Jy ! Total flux subtracted in 200 components = 0.0417688 Jy ! Clean residual min=-0.013341 max=0.018080 Jy/beam ! Clean residual mean=-0.000100 rms=0.003854 Jy/beam ! Combined flux in latest and established models = 0.335499 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 0.335499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090829Jy sigma=0.000794 ! Fit after self-cal, rms=0.090793Jy sigma=0.000793 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.95 KP 1.00 ! LA 0.99 MK 1.02 NL 0.91 OV 1.07 ! PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.00* HN 0.99 KP 0.94 ! LA 0.95 MK 1.00 NL 1.08 OV 1.09 ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.98 KP 0.95 ! LA 0.98 MK 1.03 NL 1.08 OV 1.03 ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.95 KP 1.00* ! LA 0.99 MK 1.05 NL 1.00* OV 0.67 ! PT 0.97 ! ! ! Fit before self-cal, rms=0.090793Jy sigma=0.000793 ! Fit after self-cal, rms=0.083904Jy sigma=0.000731 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.443 mas, bmaj=11.95 mas, bpa=-10.64 degrees ! Estimated noise=1738.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00475265 Jy ! Component: 100 - total flux cleaned = -0.00676675 Jy ! Component: 150 - total flux cleaned = -0.00754397 Jy ! Component: 200 - total flux cleaned = -0.0076904 Jy ! Total flux subtracted in 200 components = -0.0076904 Jy ! Clean residual min=-0.010636 max=0.011906 Jy/beam ! Clean residual mean=-0.000051 rms=0.003148 Jy/beam ! Combined flux in latest and established models = 0.327809 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.327809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083532Jy sigma=0.000729 ! Fit after self-cal, rms=0.083531Jy sigma=0.000728 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083531Jy sigma=0.000728 ! Fit after self-cal, rms=0.078220Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.441 mas, bmaj=11.87 mas, bpa=-10.85 degrees ! Estimated noise=1733.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000751623 Jy ! Component: 100 - total flux cleaned = 0.000895249 Jy ! Component: 150 - total flux cleaned = 0.00101452 Jy ! Component: 200 - total flux cleaned = 0.00111684 Jy ! Total flux subtracted in 200 components = 0.00111684 Jy ! Clean residual min=-0.004921 max=0.006019 Jy/beam ! Clean residual mean=-0.000001 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.328926 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.328926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078108Jy sigma=0.000659 ! Fit after self-cal, rms=0.078182Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048527 Jy ! Component: 100 - total flux cleaned = 0.00483606 Jy ! Component: 150 - total flux cleaned = 0.00454562 Jy ! Component: 200 - total flux cleaned = 0.00430697 Jy ! Total flux subtracted in 200 components = 0.00430697 Jy ! Clean residual min=-0.004460 max=0.003843 Jy/beam ! Clean residual mean=0.000010 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.333232 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 96 components and 0.333232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077703Jy sigma=0.000654 ! Fit after self-cal, rms=0.077657Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077657Jy sigma=0.000654 ! Fit after self-cal, rms=0.077484Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.439 mas, bmaj=11.85 mas, bpa=-10.84 degrees ! Estimated noise=1733.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210978 Jy ! Component: 100 - total flux cleaned = 0.00241871 Jy ! Component: 150 - total flux cleaned = 0.00242276 Jy ! Component: 200 - total flux cleaned = 0.0023676 Jy ! Total flux subtracted in 200 components = 0.0023676 Jy ! Clean residual min=-0.004155 max=0.003281 Jy/beam ! Clean residual mean=-0.000001 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.3356 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 114 components and 0.3356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077331Jy sigma=0.000652 ! Fit after self-cal, rms=0.077318Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557942 Jy ! Component: 100 - total flux cleaned = 0.000607279 Jy ! Component: 150 - total flux cleaned = 0.000696989 Jy ! Component: 200 - total flux cleaned = 0.000738666 Jy ! Total flux subtracted in 200 components = 0.000738666 Jy ! Clean residual min=-0.004022 max=0.003114 Jy/beam ! Clean residual mean=0.000001 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.336339 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 121 components and 0.336339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077258Jy sigma=0.000651 ! Fit after self-cal, rms=0.077256Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077256Jy sigma=0.000651 ! Fit after self-cal, rms=0.077191Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.128 mas, bmaj=11.96 mas, bpa=-14.57 degrees ! Estimated noise=1939.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164821 Jy ! Component: 100 - total flux cleaned = 0.001825 Jy ! Component: 150 - total flux cleaned = 0.00189521 Jy ! Component: 200 - total flux cleaned = 0.00199226 Jy ! Total flux subtracted in 200 components = 0.00199226 Jy ! Clean residual min=-0.003983 max=0.003212 Jy/beam ! Clean residual mean=-0.000007 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.338331 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 147 components and 0.338331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077145Jy sigma=0.000651 ! Fit after self-cal, rms=0.077142Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482802 Jy ! Component: 100 - total flux cleaned = 0.000599697 Jy ! Component: 150 - total flux cleaned = 0.00065206 Jy ! Component: 200 - total flux cleaned = 0.000674603 Jy ! Total flux subtracted in 200 components = 0.000674603 Jy ! Clean residual min=-0.003916 max=0.003222 Jy/beam ! Clean residual mean=-0.000005 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.339006 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 162 components and 0.339005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077121Jy sigma=0.000650 ! Fit after self-cal, rms=0.077122Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.435 mas, bmaj=11.86 mas, bpa=-10.82 degrees ! Estimated noise=1733.53 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.435 x 11.86 at -10.82 degrees (North through East) ! Clean map min=-0.003563 max=0.30554 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=11.78 mas, bpa=-10.77 degrees ! Estimated noise=2147.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.236351 Jy ! Component: 100 - total flux cleaned = 0.288297 Jy ! Component: 150 - total flux cleaned = 0.306166 Jy ! Component: 200 - total flux cleaned = 0.317238 Jy ! Total flux subtracted in 200 components = 0.317238 Jy ! Clean residual min=-0.007928 max=0.006070 Jy/beam ! Clean residual mean=-0.000033 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.317238 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.317238 Jy ! Inverting map and beam ! Estimated beam: bmin=4.435 mas, bmaj=11.86 mas, bpa=-10.82 degrees ! Estimated noise=1733.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00979731 Jy ! Component: 100 - total flux cleaned = 0.0157138 Jy ! Component: 150 - total flux cleaned = 0.0192619 Jy ! Component: 200 - total flux cleaned = 0.0194966 Jy ! Total flux subtracted in 200 components = 0.0194966 Jy ! Clean residual min=-0.004514 max=0.003473 Jy/beam ! Clean residual mean=-0.000009 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.336735 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 56 components and 0.336735 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.128 mas, bmaj=11.96 mas, bpa=-14.57 degrees ! Estimated noise=1939.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175887 Jy ! Component: 100 - total flux cleaned = 0.0020448 Jy ! Component: 150 - total flux cleaned = 0.00204748 Jy ! Component: 200 - total flux cleaned = 0.00209767 Jy ! Total flux subtracted in 200 components = 0.00209767 Jy ! Clean residual min=-0.004234 max=0.003478 Jy/beam ! Clean residual mean=-0.000006 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.338832 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.19556e-05 Jy ! Component: 100 - total flux cleaned = 7.56331e-05 Jy ! Component: 150 - total flux cleaned = 7.47104e-05 Jy ! Component: 200 - total flux cleaned = 0.00013705 Jy ! Total flux subtracted in 200 components = 0.00013705 Jy ! Clean residual min=-0.004061 max=0.003342 Jy/beam ! Clean residual mean=-0.000005 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.338969 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 104 components and 0.338969 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.435 mas, bmaj=11.86 mas, bpa=-10.82 degrees ! Estimated noise=1733.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000623888 Jy ! Component: 100 - total flux cleaned = -0.000719543 Jy ! Component: 150 - total flux cleaned = -0.000764488 Jy ! Component: 200 - total flux cleaned = -0.00084743 Jy ! Total flux subtracted in 200 components = -0.00084743 Jy ! Clean residual min=-0.003390 max=0.003130 Jy/beam ! Clean residual mean=-0.000004 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.338122 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 0.338122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077134Jy sigma=0.000651 ! Fit after self-cal, rms=0.077134Jy sigma=0.000651 wmodel J0603+1742_S_2017_09_26_pus_map.mod ! Writing 122 model components to file: J0603+1742_S_2017_09_26_pus_map.mod wobs J0603+1742_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0603+1742_S_2017_09_26_pus_uvs.fits wwins J0603+1742_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J0603+1742_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135348 Jy ! Component: 100 - total flux cleaned = -0.00200889 Jy ! Component: 150 - total flux cleaned = -0.00241513 Jy ! Component: 200 - total flux cleaned = -0.0026077 Jy ! Component: 250 - total flux cleaned = -0.00297361 Jy ! Component: 300 - total flux cleaned = -0.00314901 Jy ! Component: 350 - total flux cleaned = -0.00340134 Jy ! Component: 400 - total flux cleaned = -0.00340175 Jy ! Component: 450 - total flux cleaned = -0.00344122 Jy ! Component: 500 - total flux cleaned = -0.00321323 Jy ! Component: 550 - total flux cleaned = -0.0032141 Jy ! Component: 600 - total flux cleaned = -0.00307049 Jy ! Component: 650 - total flux cleaned = -0.00289561 Jy ! Component: 700 - total flux cleaned = -0.00275861 Jy ! Component: 750 - total flux cleaned = -0.00255881 Jy ! Component: 800 - total flux cleaned = -0.00233199 Jy ! Component: 850 - total flux cleaned = -0.00220523 Jy ! Component: 900 - total flux cleaned = -0.00198806 Jy ! Component: 950 - total flux cleaned = -0.00186654 Jy ! Component: 1000 - total flux cleaned = -0.00174645 Jy ! Component: 1050 - total flux cleaned = -0.0014827 Jy ! Component: 1100 - total flux cleaned = -0.00131058 Jy ! Component: 1150 - total flux cleaned = -0.00114073 Jy ! Component: 1200 - total flux cleaned = -0.000890947 Jy ! Component: 1250 - total flux cleaned = -0.000781452 Jy ! Component: 1300 - total flux cleaned = -0.000486471 Jy ! Component: 1350 - total flux cleaned = -0.000302129 Jy ! Component: 1400 - total flux cleaned = -0.000120385 Jy ! Component: 1450 - total flux cleaned = 8.41922e-05 Jy ! Component: 1500 - total flux cleaned = 0.000285318 Jy ! Component: 1550 - total flux cleaned = 0.000458228 Jy ! Component: 1600 - total flux cleaned = 0.000604472 Jy ! Component: 1650 - total flux cleaned = 0.000772457 Jy ! Component: 1700 - total flux cleaned = 0.000843299 Jy ! Component: 1750 - total flux cleaned = 0.00105239 Jy ! Component: 1800 - total flux cleaned = 0.0011208 Jy ! Component: 1850 - total flux cleaned = 0.00123383 Jy ! Component: 1900 - total flux cleaned = 0.00138992 Jy ! Component: 1950 - total flux cleaned = 0.00149987 Jy ! Component: 2000 - total flux cleaned = 0.00162966 Jy ! Component: 2050 - total flux cleaned = 0.00175766 Jy ! Component: 2100 - total flux cleaned = 0.0018628 Jy ! Component: 2150 - total flux cleaned = 0.00190449 Jy ! Component: 2200 - total flux cleaned = 0.00198676 Jy ! Component: 2250 - total flux cleaned = 0.00204751 Jy ! Component: 2300 - total flux cleaned = 0.00214739 Jy ! Component: 2350 - total flux cleaned = 0.00214744 Jy ! Component: 2400 - total flux cleaned = 0.00220613 Jy ! Component: 2450 - total flux cleaned = 0.00222525 Jy ! Component: 2500 - total flux cleaned = 0.00226361 Jy ! Component: 2550 - total flux cleaned = 0.00224459 Jy ! Component: 2600 - total flux cleaned = 0.00228251 Jy ! Component: 2650 - total flux cleaned = 0.00237609 Jy ! Component: 2700 - total flux cleaned = 0.00230202 Jy ! Component: 2750 - total flux cleaned = 0.00232073 Jy ! Component: 2800 - total flux cleaned = 0.00239387 Jy ! Component: 2850 - total flux cleaned = 0.00243012 Jy ! Component: 2900 - total flux cleaned = 0.00250196 Jy ! Component: 2950 - total flux cleaned = 0.00255554 Jy ! Component: 3000 - total flux cleaned = 0.00264409 Jy ! Component: 3050 - total flux cleaned = 0.00266184 Jy ! Component: 3100 - total flux cleaned = 0.00266211 Jy ! Component: 3150 - total flux cleaned = 0.00269699 Jy ! Component: 3200 - total flux cleaned = 0.00271421 Jy ! Component: 3250 - total flux cleaned = 0.00278254 Jy ! Component: 3300 - total flux cleaned = 0.00281655 Jy ! Component: 3350 - total flux cleaned = 0.00283328 Jy ! Component: 3400 - total flux cleaned = 0.00283319 Jy ! Component: 3450 - total flux cleaned = 0.00283315 Jy ! Component: 3500 - total flux cleaned = 0.00280009 Jy ! Component: 3550 - total flux cleaned = 0.00283311 Jy ! Component: 3600 - total flux cleaned = 0.00283322 Jy ! Component: 3650 - total flux cleaned = 0.00284957 Jy ! Component: 3700 - total flux cleaned = 0.00289823 Jy ! Component: 3750 - total flux cleaned = 0.0029144 Jy ! Component: 3800 - total flux cleaned = 0.00296264 Jy ! Component: 3850 - total flux cleaned = 0.00293068 Jy ! Component: 3900 - total flux cleaned = 0.00293067 Jy ! Component: 3950 - total flux cleaned = 0.00294658 Jy ! Component: 4000 - total flux cleaned = 0.00289923 Jy ! Component: 4050 - total flux cleaned = 0.00293075 Jy ! Total flux subtracted in 4096 components = 0.00294644 Jy ! Clean residual min=-0.001013 max=0.000920 Jy/beam ! Clean residual mean=0.000001 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.341068 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 412 components and 0.341068 Jy ![Exited script file: muppet] wmap "J0603+1742_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.435 x 11.86 at -10.82 degrees (North through East) ! Clean map min=-0.0032484 max=0.30525 Jy/beam ! Writing clean map to FITS file: J0603+1742_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.305247 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000276004 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.27126 0.27126 0.54252 1.08504 2.17008 4.34016 8.68032 17.3606 34.7213 69.4425 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.305 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.435 x 11.86 at -10.82 degrees (North through East) ! Clean map min=-0.0032484 max=0.30525 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0603+1742_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:55:13 2019