! Started logfile: J0602-0004_S_2017_10_09_pus_uvs.log on Sun May 12 13:06:00 2019 obs J0602-0004_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0602-0004_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.652874 visibilities/baseline/integration-bin. ! Found source: J0602-0004 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 13632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0602-0004_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 503 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 431 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1005 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.996606Jy sigma=0.008685 ! Fit after self-cal, rms=0.954238Jy sigma=0.008325 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=16.15 mas, bpa=-18.47 degrees ! Estimated noise=1287.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0359459 Jy ! Component: 100 - total flux cleaned = 0.0440239 Jy ! Total flux subtracted in 100 components = 0.0440239 Jy ! Clean residual min=-0.003924 max=0.004613 Jy/beam ! Clean residual mean=0.000015 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.0440239 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0440239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078341Jy sigma=0.000623 ! Fit after self-cal, rms=0.076991Jy sigma=0.000611 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.894 mas, bmaj=17.6 mas, bpa=-17.53 degrees ! Estimated noise=930.839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584612 Jy ! Component: 100 - total flux cleaned = 0.00834185 Jy ! Component: 150 - total flux cleaned = 0.0099357 Jy ! Component: 200 - total flux cleaned = 0.0110283 Jy ! Total flux subtracted in 200 components = 0.0110283 Jy ! Clean residual min=-0.002728 max=0.002705 Jy/beam ! Clean residual mean=0.000010 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0550522 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0550522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076497Jy sigma=0.000607 ! Fit after self-cal, rms=0.076452Jy sigma=0.000607 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 1.07 KP 1.02 ! LA 1.02 MK 1.09 NL 0.95 OV 1.00* ! PT 1.09 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.02 HN 1.00 KP 0.95 ! LA 0.92 MK 1.10 NL 1.10 OV 1.00* ! PT 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 0.97 KP 0.89 ! LA 0.83 MK 1.11 NL 1.11 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.75 HN 0.78 KP 1.00* ! LA 1.00* MK 1.02 NL 1.00* OV 1.00* ! PT 0.78 ! ! ! Fit before self-cal, rms=0.076452Jy sigma=0.000607 ! Fit after self-cal, rms=0.075245Jy sigma=0.000605 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.923 mas, bmaj=17.46 mas, bpa=-17.42 degrees ! Estimated noise=936.515 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119714 Jy ! Component: 100 - total flux cleaned = 0.00147939 Jy ! Component: 150 - total flux cleaned = 0.00152015 Jy ! Component: 200 - total flux cleaned = 0.00157499 Jy ! Total flux subtracted in 200 components = 0.00157499 Jy ! Clean residual min=-0.002240 max=0.002177 Jy/beam ! Clean residual mean=0.000004 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.0566272 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.0566272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075222Jy sigma=0.000605 ! Fit after self-cal, rms=0.075079Jy sigma=0.000604 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075079Jy sigma=0.000604 ! Fit after self-cal, rms=0.073342Jy sigma=0.000604 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.937 mas, bmaj=17.25 mas, bpa=-17.43 degrees ! Estimated noise=929.725 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107405 Jy ! Component: 100 - total flux cleaned = 0.0015227 Jy ! Component: 150 - total flux cleaned = 0.00159173 Jy ! Component: 200 - total flux cleaned = 0.00162264 Jy ! Total flux subtracted in 200 components = 0.00162264 Jy ! Clean residual min=-0.002264 max=0.002301 Jy/beam ! Clean residual mean=0.000008 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0582498 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 49 components and 0.0582498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073323Jy sigma=0.000603 ! Fit after self-cal, rms=0.073295Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-35.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225646 Jy ! Component: 100 - total flux cleaned = 0.00333632 Jy ! Component: 150 - total flux cleaned = 0.00374537 Jy ! Component: 200 - total flux cleaned = 0.00393348 Jy ! Total flux subtracted in 200 components = 0.00393348 Jy ! Clean residual min=-0.001953 max=0.001760 Jy/beam ! Clean residual mean=0.000004 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0621833 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 83 components and 0.0621833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073205Jy sigma=0.000602 ! Fit after self-cal, rms=0.073173Jy sigma=0.000602 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073173Jy sigma=0.000602 ! Fit after self-cal, rms=0.072433Jy sigma=0.000602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=17.16 mas, bpa=-17.41 degrees ! Estimated noise=921.143 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156386 Jy ! Component: 100 - total flux cleaned = 0.00254056 Jy ! Component: 150 - total flux cleaned = 0.00304079 Jy ! Component: 200 - total flux cleaned = 0.00317538 Jy ! Total flux subtracted in 200 components = 0.00317538 Jy ! Clean residual min=-0.001787 max=0.001744 Jy/beam ! Clean residual mean=0.000003 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0653587 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 97 components and 0.0653587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072382Jy sigma=0.000602 ! Fit after self-cal, rms=0.072345Jy sigma=0.000601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001285 Jy ! Component: 100 - total flux cleaned = 0.00185788 Jy ! Component: 150 - total flux cleaned = 0.00188872 Jy ! Component: 200 - total flux cleaned = 0.00188866 Jy ! Total flux subtracted in 200 components = 0.00188866 Jy ! Clean residual min=-0.001858 max=0.001830 Jy/beam ! Clean residual mean=0.000002 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0672473 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 113 components and 0.0672473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072304Jy sigma=0.000601 ! Fit after self-cal, rms=0.072298Jy sigma=0.000601 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072298Jy sigma=0.000601 ! Fit after self-cal, rms=0.072007Jy sigma=0.000601 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.878 mas, bmaj=17.36 mas, bpa=-17.4 degrees ! Estimated noise=1064.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107464 Jy ! Component: 100 - total flux cleaned = 0.0016788 Jy ! Component: 150 - total flux cleaned = 0.00187055 Jy ! Component: 200 - total flux cleaned = 0.00203575 Jy ! Total flux subtracted in 200 components = 0.00203575 Jy ! Clean residual min=-0.002004 max=0.001488 Jy/beam ! Clean residual mean=0.000004 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0692831 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 132 components and 0.0692831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071986Jy sigma=0.000601 ! Fit after self-cal, rms=0.071999Jy sigma=0.000601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000712684 Jy ! Component: 100 - total flux cleaned = 0.000860329 Jy ! Component: 150 - total flux cleaned = 0.000992132 Jy ! Component: 200 - total flux cleaned = 0.00106727 Jy ! Total flux subtracted in 200 components = 0.00106727 Jy ! Clean residual min=-0.002050 max=0.001573 Jy/beam ! Clean residual mean=0.000002 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0703504 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 144 components and 0.0703503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071987Jy sigma=0.000601 ! Fit after self-cal, rms=0.071989Jy sigma=0.000601 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.938 mas, bmaj=17.09 mas, bpa=-17.4 degrees ! Estimated noise=918.503 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.938 x 17.09 at -17.4 degrees (North through East) ! Clean map min=-0.0017657 max=0.049071 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.855 mas, bmaj=15.69 mas, bpa=-18.38 degrees ! Estimated noise=1260.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363798 Jy ! Component: 100 - total flux cleaned = 0.0449853 Jy ! Component: 150 - total flux cleaned = 0.0496479 Jy ! Component: 200 - total flux cleaned = 0.0532549 Jy ! Total flux subtracted in 200 components = 0.0532549 Jy ! Clean residual min=-0.003247 max=0.002962 Jy/beam ! Clean residual mean=0.000016 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.053255 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.053255 Jy ! Inverting map and beam ! Estimated beam: bmin=3.938 mas, bmaj=17.09 mas, bpa=-17.4 degrees ! Estimated noise=918.503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432875 Jy ! Component: 100 - total flux cleaned = 0.00732771 Jy ! Component: 150 - total flux cleaned = 0.00970799 Jy ! Component: 200 - total flux cleaned = 0.0116671 Jy ! Total flux subtracted in 200 components = 0.0116671 Jy ! Clean residual min=-0.002268 max=0.001862 Jy/beam ! Clean residual mean=0.000013 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.064922 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 43 components and 0.064922 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.878 mas, bmaj=17.36 mas, bpa=-17.4 degrees ! Estimated noise=1064.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205232 Jy ! Component: 100 - total flux cleaned = 0.00342252 Jy ! Component: 150 - total flux cleaned = 0.00420327 Jy ! Component: 200 - total flux cleaned = 0.00481951 Jy ! Total flux subtracted in 200 components = 0.00481951 Jy ! Clean residual min=-0.002070 max=0.001471 Jy/beam ! Clean residual mean=0.000009 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0697415 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354508 Jy ! Component: 100 - total flux cleaned = 0.000503956 Jy ! Component: 150 - total flux cleaned = 0.000635488 Jy ! Component: 200 - total flux cleaned = 0.000751458 Jy ! Total flux subtracted in 200 components = 0.000751458 Jy ! Clean residual min=-0.002077 max=0.001470 Jy/beam ! Clean residual mean=0.000005 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.070493 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 95 components and 0.070493 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.938 mas, bmaj=17.09 mas, bpa=-17.4 degrees ! Estimated noise=918.503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227424 Jy ! Component: 100 - total flux cleaned = -0.000358436 Jy ! Component: 150 - total flux cleaned = -0.000416047 Jy ! Component: 200 - total flux cleaned = -0.000388676 Jy ! Total flux subtracted in 200 components = -0.000388676 Jy ! Clean residual min=-0.001819 max=0.001733 Jy/beam ! Clean residual mean=0.000003 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0701043 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 124 components and 0.0701043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071977Jy sigma=0.000601 ! Fit after self-cal, rms=0.071963Jy sigma=0.000600 wmodel J0602-0004_S_2017_10_09_pus_map.mod ! Writing 124 model components to file: J0602-0004_S_2017_10_09_pus_map.mod wobs J0602-0004_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0602-0004_S_2017_10_09_pus_uvs.fits wwins J0602-0004_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0602-0004_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000462308 Jy ! Component: 100 - total flux cleaned = -0.000779857 Jy ! Component: 150 - total flux cleaned = -0.00101906 Jy ! Component: 200 - total flux cleaned = -0.00116982 Jy ! Component: 250 - total flux cleaned = -0.00136021 Jy ! Component: 300 - total flux cleaned = -0.00145025 Jy ! Component: 350 - total flux cleaned = -0.00153706 Jy ! Component: 400 - total flux cleaned = -0.0016416 Jy ! Component: 450 - total flux cleaned = -0.00170183 Jy ! Component: 500 - total flux cleaned = -0.00174107 Jy ! Component: 550 - total flux cleaned = -0.00176049 Jy ! Component: 600 - total flux cleaned = -0.00179726 Jy ! Component: 650 - total flux cleaned = -0.00176069 Jy ! Component: 700 - total flux cleaned = -0.00163797 Jy ! Component: 750 - total flux cleaned = -0.00158659 Jy ! Component: 800 - total flux cleaned = -0.00150288 Jy ! Component: 850 - total flux cleaned = -0.00148659 Jy ! Component: 900 - total flux cleaned = -0.00147021 Jy ! Component: 950 - total flux cleaned = -0.00143889 Jy ! Component: 1000 - total flux cleaned = -0.00154685 Jy ! Component: 1050 - total flux cleaned = -0.00163751 Jy ! Component: 1100 - total flux cleaned = -0.00168201 Jy ! Component: 1150 - total flux cleaned = -0.00176967 Jy ! Component: 1200 - total flux cleaned = -0.00179846 Jy ! Component: 1250 - total flux cleaned = -0.00189774 Jy ! Component: 1300 - total flux cleaned = -0.00195339 Jy ! Component: 1350 - total flux cleaned = -0.00202195 Jy ! Component: 1400 - total flux cleaned = -0.00207579 Jy ! Component: 1450 - total flux cleaned = -0.00216885 Jy ! Component: 1500 - total flux cleaned = -0.00223427 Jy ! Component: 1550 - total flux cleaned = -0.00227304 Jy ! Component: 1600 - total flux cleaned = -0.00229865 Jy ! Component: 1650 - total flux cleaned = -0.00231123 Jy ! Component: 1700 - total flux cleaned = -0.0023237 Jy ! Component: 1750 - total flux cleaned = -0.00232369 Jy ! Component: 1800 - total flux cleaned = -0.00229915 Jy ! Component: 1850 - total flux cleaned = -0.00231133 Jy ! Component: 1900 - total flux cleaned = -0.00229932 Jy ! Component: 1950 - total flux cleaned = -0.00231098 Jy ! Component: 2000 - total flux cleaned = -0.00225249 Jy ! Component: 2050 - total flux cleaned = -0.00220626 Jy ! Component: 2100 - total flux cleaned = -0.00217177 Jy ! Component: 2150 - total flux cleaned = -0.00206953 Jy ! Component: 2200 - total flux cleaned = -0.00203579 Jy ! Component: 2250 - total flux cleaned = -0.00199108 Jy ! Component: 2300 - total flux cleaned = -0.00198 Jy ! Component: 2350 - total flux cleaned = -0.00192488 Jy ! Component: 2400 - total flux cleaned = -0.00188114 Jy ! Component: 2450 - total flux cleaned = -0.0018378 Jy ! Component: 2500 - total flux cleaned = -0.00181617 Jy ! Component: 2550 - total flux cleaned = -0.0017627 Jy ! Component: 2600 - total flux cleaned = -0.00170957 Jy ! Component: 2650 - total flux cleaned = -0.0016568 Jy ! Component: 2700 - total flux cleaned = -0.00162521 Jy ! Component: 2750 - total flux cleaned = -0.00157309 Jy ! Component: 2800 - total flux cleaned = -0.00153155 Jy ! Component: 2850 - total flux cleaned = -0.00145938 Jy ! Component: 2900 - total flux cleaned = -0.0014184 Jy ! Component: 2950 - total flux cleaned = -0.00136732 Jy ! Component: 3000 - total flux cleaned = -0.00130647 Jy ! Component: 3050 - total flux cleaned = -0.00125603 Jy ! Component: 3100 - total flux cleaned = -0.00122586 Jy ! Component: 3150 - total flux cleaned = -0.00117588 Jy ! Component: 3200 - total flux cleaned = -0.00110617 Jy ! Component: 3250 - total flux cleaned = -0.00106653 Jy ! Component: 3300 - total flux cleaned = -0.00101712 Jy ! Component: 3350 - total flux cleaned = -0.000958194 Jy ! Component: 3400 - total flux cleaned = -0.00091911 Jy ! Component: 3450 - total flux cleaned = -0.000860704 Jy ! Component: 3500 - total flux cleaned = -0.000792894 Jy ! Component: 3550 - total flux cleaned = -0.000754326 Jy ! Component: 3600 - total flux cleaned = -0.000715918 Jy ! Component: 3650 - total flux cleaned = -0.000639308 Jy ! Component: 3700 - total flux cleaned = -0.000572501 Jy ! Component: 3750 - total flux cleaned = -0.000515443 Jy ! Component: 3800 - total flux cleaned = -0.00044905 Jy ! Component: 3850 - total flux cleaned = -0.000373476 Jy ! Component: 3900 - total flux cleaned = -0.000307562 Jy ! Component: 3950 - total flux cleaned = -0.000241883 Jy ! Component: 4000 - total flux cleaned = -0.00017636 Jy ! Component: 4050 - total flux cleaned = -0.000120355 Jy ! Total flux subtracted in 4096 components = -7.37656e-05 Jy ! Clean residual min=-0.000488 max=0.000547 Jy/beam ! Clean residual mean=0.000001 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.0700306 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 352 components and 0.0700306 Jy ![Exited script file: muppet] wmap "J0602-0004_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.938 x 17.09 at -17.4 degrees (North through East) ! Clean map min=-0.0013451 max=0.048723 Jy/beam ! Writing clean map to FITS file: J0602-0004_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0487225 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000162928 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0032 1.0032 2.0064 4.0128 8.0256 16.0512 32.1024 64.2048 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.048 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.938 x 17.09 at -17.4 degrees (North through East) ! Clean map min=-0.0013451 max=0.048723 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0602-0004_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:06:05 2019