! Started logfile: J0601-2736_S_2017_10_21_pus_uvs.log on Sat May 11 20:52:08 2019 obs J0601-2736_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0601-2736_S_2017_10_21_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.926245 visibilities/baseline/integration-bin. ! Found source: J0601-2736 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0601-2736_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 553 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.975568Jy sigma=0.007593 ! Fit after self-cal, rms=0.940808Jy sigma=0.007353 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=15.4 mas, bpa=-20.55 degrees ! Estimated noise=1754.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472906 Jy ! Component: 100 - total flux cleaned = 0.0598124 Jy ! Total flux subtracted in 100 components = 0.0598124 Jy ! Clean residual min=-0.005807 max=0.006802 Jy/beam ! Clean residual mean=-0.000024 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.0598124 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0598124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104550Jy sigma=0.000716 ! Fit after self-cal, rms=0.104018Jy sigma=0.000713 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=17.83 mas, bpa=-19.71 degrees ! Estimated noise=886.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00912609 Jy ! Component: 100 - total flux cleaned = 0.0138837 Jy ! Component: 150 - total flux cleaned = 0.0166167 Jy ! Component: 200 - total flux cleaned = 0.0182872 Jy ! Total flux subtracted in 200 components = 0.0182872 Jy ! Clean residual min=-0.003438 max=0.003585 Jy/beam ! Clean residual mean=-0.000032 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.0780995 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 82 components and 0.0780995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103236Jy sigma=0.000707 ! Fit after self-cal, rms=0.103151Jy sigma=0.000706 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.95 KP 1.16 ! LA 1.08 MK 1.06 NL 1.02 OV 1.08 ! PT 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.04 KP 1.08 ! LA 0.93 MK 1.09 NL 1.06 OV 1.13 ! PT 0.86 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.97 KP 1.04 ! LA 0.82 MK 1.14 NL 1.23 OV 0.95 ! PT 0.80 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.73 KP 1.00* ! LA 0.95 MK 0.81 NL 1.00* OV 1.00* ! PT 0.78 ! ! ! Fit before self-cal, rms=0.103151Jy sigma=0.000706 ! Fit after self-cal, rms=0.100717Jy sigma=0.000701 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=17.76 mas, bpa=-19.37 degrees ! Estimated noise=887.969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112788 Jy ! Component: 100 - total flux cleaned = 0.00124502 Jy ! Component: 150 - total flux cleaned = 0.00119464 Jy ! Component: 200 - total flux cleaned = 0.00112419 Jy ! Total flux subtracted in 200 components = 0.00112419 Jy ! Clean residual min=-0.002242 max=0.002671 Jy/beam ! Clean residual mean=0.000009 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.0792237 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 95 components and 0.0792237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100688Jy sigma=0.000701 ! Fit after self-cal, rms=0.100964Jy sigma=0.000700 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100964Jy sigma=0.000700 ! Fit after self-cal, rms=0.101518Jy sigma=0.000699 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=17.69 mas, bpa=-19.27 degrees ! Estimated noise=893.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000843152 Jy ! Component: 100 - total flux cleaned = 0.00087574 Jy ! Component: 150 - total flux cleaned = 0.000848355 Jy ! Component: 200 - total flux cleaned = 0.00079963 Jy ! Total flux subtracted in 200 components = 0.00079963 Jy ! Clean residual min=-0.002532 max=0.002759 Jy/beam ! Clean residual mean=0.000012 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0800233 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 101 components and 0.0800233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101489Jy sigma=0.000699 ! Fit after self-cal, rms=0.101689Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.18914e-05 Jy ! Component: 100 - total flux cleaned = -0.00016318 Jy ! Component: 150 - total flux cleaned = -0.000215056 Jy ! Component: 200 - total flux cleaned = -0.000261709 Jy ! Total flux subtracted in 200 components = -0.000261709 Jy ! Clean residual min=-0.002778 max=0.002759 Jy/beam ! Clean residual mean=0.000008 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0797616 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 112 components and 0.0797616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101669Jy sigma=0.000699 ! Fit after self-cal, rms=0.101682Jy sigma=0.000699 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101682Jy sigma=0.000699 ! Fit after self-cal, rms=0.101892Jy sigma=0.000698 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=17.61 mas, bpa=-19.28 degrees ! Estimated noise=893.015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000799052 Jy ! Component: 100 - total flux cleaned = 0.000741913 Jy ! Component: 150 - total flux cleaned = 0.000690229 Jy ! Component: 200 - total flux cleaned = 0.000619088 Jy ! Total flux subtracted in 200 components = 0.000619088 Jy ! Clean residual min=-0.002633 max=0.002861 Jy/beam ! Clean residual mean=0.000010 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0803807 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 119 components and 0.0803807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101867Jy sigma=0.000698 ! Fit after self-cal, rms=0.102025Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.08769e-05 Jy ! Component: 100 - total flux cleaned = -8.12162e-05 Jy ! Component: 150 - total flux cleaned = -0.000104254 Jy ! Component: 200 - total flux cleaned = -0.000146782 Jy ! Total flux subtracted in 200 components = -0.000146782 Jy ! Clean residual min=-0.002736 max=0.002813 Jy/beam ! Clean residual mean=0.000009 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0802339 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 120 components and 0.0802339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102009Jy sigma=0.000698 ! Fit after self-cal, rms=0.102023Jy sigma=0.000698 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102023Jy sigma=0.000698 ! Fit after self-cal, rms=0.102274Jy sigma=0.000698 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.96 mas, bmaj=30.84 mas, bpa=-7.171 degrees ! Estimated noise=1056.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000324915 Jy ! Component: 100 - total flux cleaned = 0.00029076 Jy ! Component: 150 - total flux cleaned = 0.000275347 Jy ! Component: 200 - total flux cleaned = 0.000247223 Jy ! Total flux subtracted in 200 components = 0.000247223 Jy ! Clean residual min=-0.003020 max=0.002584 Jy/beam ! Clean residual mean=0.000019 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.0804812 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 125 components and 0.0804812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102267Jy sigma=0.000698 ! Fit after self-cal, rms=0.102347Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.90118e-05 Jy ! Component: 100 - total flux cleaned = -0.000135458 Jy ! Component: 150 - total flux cleaned = -0.000171869 Jy ! Component: 200 - total flux cleaned = -0.000194785 Jy ! Total flux subtracted in 200 components = -0.000194785 Jy ! Clean residual min=-0.002968 max=0.002590 Jy/beam ! Clean residual mean=0.000017 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.0802864 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 126 components and 0.0802864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102345Jy sigma=0.000698 ! Fit after self-cal, rms=0.102342Jy sigma=0.000698 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=17.56 mas, bpa=-19.27 degrees ! Estimated noise=892.359 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 17.56 at -19.27 degrees (North through East) ! Clean map min=-0.002983 max=0.055284 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=15.04 mas, bpa=-19.88 degrees ! Estimated noise=1772.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457644 Jy ! Component: 100 - total flux cleaned = 0.0598504 Jy ! Component: 150 - total flux cleaned = 0.067782 Jy ! Component: 200 - total flux cleaned = 0.0728002 Jy ! Total flux subtracted in 200 components = 0.0728002 Jy ! Clean residual min=-0.005747 max=0.004649 Jy/beam ! Clean residual mean=-0.000004 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.0728001 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.0728001 Jy ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=17.56 mas, bpa=-19.27 degrees ! Estimated noise=892.359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464118 Jy ! Component: 100 - total flux cleaned = 0.00702411 Jy ! Component: 150 - total flux cleaned = 0.00740551 Jy ! Component: 200 - total flux cleaned = 0.0074589 Jy ! Total flux subtracted in 200 components = 0.0074589 Jy ! Clean residual min=-0.002865 max=0.002753 Jy/beam ! Clean residual mean=0.000008 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.080259 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 74 components and 0.080259 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.96 mas, bmaj=30.84 mas, bpa=-7.171 degrees ! Estimated noise=1056.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000520378 Jy ! Component: 100 - total flux cleaned = 0.000457575 Jy ! Component: 150 - total flux cleaned = 0.000404248 Jy ! Component: 200 - total flux cleaned = 0.000331428 Jy ! Total flux subtracted in 200 components = 0.000331428 Jy ! Clean residual min=-0.002944 max=0.002616 Jy/beam ! Clean residual mean=0.000018 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0805904 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.46331e-05 Jy ! Component: 100 - total flux cleaned = -0.000122932 Jy ! Component: 150 - total flux cleaned = -0.000158156 Jy ! Component: 200 - total flux cleaned = -0.000206859 Jy ! Total flux subtracted in 200 components = -0.000206859 Jy ! Clean residual min=-0.002949 max=0.002589 Jy/beam ! Clean residual mean=0.000017 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0803836 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 100 components and 0.0803836 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=17.56 mas, bpa=-19.27 degrees ! Estimated noise=892.359 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277202 Jy ! Component: 100 - total flux cleaned = 0.000249253 Jy ! Component: 150 - total flux cleaned = 0.000166537 Jy ! Component: 200 - total flux cleaned = 0.000115575 Jy ! Total flux subtracted in 200 components = 0.000115575 Jy ! Clean residual min=-0.002753 max=0.002808 Jy/beam ! Clean residual mean=0.000010 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0804992 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 109 components and 0.0804992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102336Jy sigma=0.000698 ! Fit after self-cal, rms=0.102338Jy sigma=0.000698 wmodel J0601-2736_S_2017_10_21_pus_map.mod ! Writing 109 model components to file: J0601-2736_S_2017_10_21_pus_map.mod wobs J0601-2736_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0601-2736_S_2017_10_21_pus_uvs.fits wwins J0601-2736_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0601-2736_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554381 Jy ! Component: 100 - total flux cleaned = 0.00114927 Jy ! Component: 150 - total flux cleaned = 0.00149135 Jy ! Component: 200 - total flux cleaned = 0.00157296 Jy ! Component: 250 - total flux cleaned = 0.00157169 Jy ! Component: 300 - total flux cleaned = 0.00149603 Jy ! Component: 350 - total flux cleaned = 0.00142397 Jy ! Component: 400 - total flux cleaned = 0.00135496 Jy ! Component: 450 - total flux cleaned = 0.00125517 Jy ! Component: 500 - total flux cleaned = 0.00119108 Jy ! Component: 550 - total flux cleaned = 0.00125442 Jy ! Component: 600 - total flux cleaned = 0.00128482 Jy ! Component: 650 - total flux cleaned = 0.00128557 Jy ! Component: 700 - total flux cleaned = 0.00134412 Jy ! Component: 750 - total flux cleaned = 0.0012875 Jy ! Component: 800 - total flux cleaned = 0.00131549 Jy ! Component: 850 - total flux cleaned = 0.00123405 Jy ! Component: 900 - total flux cleaned = 0.00123378 Jy ! Component: 950 - total flux cleaned = 0.00112897 Jy ! Component: 1000 - total flux cleaned = 0.0010524 Jy ! Component: 1050 - total flux cleaned = 0.00102734 Jy ! Component: 1100 - total flux cleaned = 0.000977382 Jy ! Component: 1150 - total flux cleaned = 0.000928684 Jy ! Component: 1200 - total flux cleaned = 0.000832757 Jy ! Component: 1250 - total flux cleaned = 0.000785345 Jy ! Component: 1300 - total flux cleaned = 0.000738481 Jy ! Component: 1350 - total flux cleaned = 0.000646814 Jy ! Component: 1400 - total flux cleaned = 0.000556471 Jy ! Component: 1450 - total flux cleaned = 0.000467548 Jy ! Component: 1500 - total flux cleaned = 0.000402104 Jy ! Component: 1550 - total flux cleaned = 0.000337715 Jy ! Component: 1600 - total flux cleaned = 0.000295248 Jy ! Component: 1650 - total flux cleaned = 0.000211542 Jy ! Component: 1700 - total flux cleaned = 0.000150081 Jy ! Component: 1750 - total flux cleaned = 0.000129513 Jy ! Component: 1800 - total flux cleaned = 0.000109241 Jy ! Component: 1850 - total flux cleaned = 1.07245e-05 Jy ! Component: 1900 - total flux cleaned = 3.00982e-05 Jy ! Component: 1950 - total flux cleaned = 6.79534e-05 Jy ! Component: 2000 - total flux cleaned = -6.46814e-05 Jy ! Component: 2050 - total flux cleaned = -0.000139387 Jy ! Component: 2100 - total flux cleaned = -0.000139103 Jy ! Component: 2150 - total flux cleaned = -0.000193923 Jy ! Component: 2200 - total flux cleaned = -0.000229843 Jy ! Component: 2250 - total flux cleaned = -0.000265737 Jy ! Component: 2300 - total flux cleaned = -0.000353776 Jy ! Component: 2350 - total flux cleaned = -0.00035363 Jy ! Component: 2400 - total flux cleaned = -0.000387973 Jy ! Component: 2450 - total flux cleaned = -0.000438992 Jy ! Component: 2500 - total flux cleaned = -0.000422092 Jy ! Component: 2550 - total flux cleaned = -0.000388938 Jy ! Component: 2600 - total flux cleaned = -0.000422201 Jy ! Component: 2650 - total flux cleaned = -0.000454746 Jy ! Component: 2700 - total flux cleaned = -0.000390012 Jy ! Component: 2750 - total flux cleaned = -0.000406068 Jy ! Component: 2800 - total flux cleaned = -0.000358625 Jy ! Component: 2850 - total flux cleaned = -0.000405742 Jy ! Component: 2900 - total flux cleaned = -0.000358794 Jy ! Component: 2950 - total flux cleaned = -0.000389905 Jy ! Component: 3000 - total flux cleaned = -0.000374508 Jy ! Component: 3050 - total flux cleaned = -0.000374492 Jy ! Component: 3100 - total flux cleaned = -0.000374349 Jy ! Component: 3150 - total flux cleaned = -0.000329864 Jy ! Component: 3200 - total flux cleaned = -0.000359361 Jy ! Component: 3250 - total flux cleaned = -0.000330175 Jy ! Component: 3300 - total flux cleaned = -0.000315791 Jy ! Component: 3350 - total flux cleaned = -0.000301395 Jy ! Component: 3400 - total flux cleaned = -0.000301468 Jy ! Component: 3450 - total flux cleaned = -0.000273328 Jy ! Component: 3500 - total flux cleaned = -0.000231468 Jy ! Component: 3550 - total flux cleaned = -0.000217622 Jy ! Component: 3600 - total flux cleaned = -0.000162828 Jy ! Component: 3650 - total flux cleaned = -0.000149172 Jy ! Component: 3700 - total flux cleaned = -0.000135718 Jy ! Component: 3750 - total flux cleaned = -9.54602e-05 Jy ! Component: 3800 - total flux cleaned = -5.5378e-05 Jy ! Component: 3850 - total flux cleaned = -1.56592e-05 Jy ! Component: 3900 - total flux cleaned = 6.3408e-05 Jy ! Component: 3950 - total flux cleaned = 7.63516e-05 Jy ! Component: 4000 - total flux cleaned = 0.000102327 Jy ! Component: 4050 - total flux cleaned = 0.00012819 Jy ! Total flux subtracted in 4096 components = 0.000153974 Jy ! Clean residual min=-0.000677 max=0.000724 Jy/beam ! Clean residual mean=-0.000003 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.0806531 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 382 components and 0.0806532 Jy ![Exited script file: muppet] wmap "J0601-2736_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 17.56 at -19.27 degrees (North through East) ! Clean map min=-0.0019711 max=0.056014 Jy/beam ! Writing clean map to FITS file: J0601-2736_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0560136 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000239161 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28091 1.28091 2.56181 5.12363 10.2473 20.4945 40.989 81.9781 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 17.56 at -19.27 degrees (North through East) ! Clean map min=-0.0019711 max=0.056014 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0601-2736_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:52:13 2019