! Started logfile: J0601-2736_S_2017_07_16_pus_uvs.log on Thu May 9 11:02:37 2019 obs J0601-2736_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0601-2736_S_2017_07_16_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.671053 visibilities/baseline/integration-bin. ! Found source: J0601-2736 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 9180 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0601-2736_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 179 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 682 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.993749Jy sigma=0.006375 ! Fit after self-cal, rms=0.938463Jy sigma=0.006058 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.437 mas, bmaj=6.66 mas, bpa=-7.388 degrees ! Estimated noise=1902.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503562 Jy ! Component: 100 - total flux cleaned = 0.0619624 Jy ! Total flux subtracted in 100 components = 0.0619624 Jy ! Clean residual min=-0.005954 max=0.005642 Jy/beam ! Clean residual mean=0.000002 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.0619624 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0619624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108324Jy sigma=0.000642 ! Fit after self-cal, rms=0.107238Jy sigma=0.000637 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=7.633 mas, bpa=-8.09 degrees ! Estimated noise=1454.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00855624 Jy ! Component: 100 - total flux cleaned = 0.0124713 Jy ! Component: 150 - total flux cleaned = 0.0146045 Jy ! Component: 200 - total flux cleaned = 0.0158262 Jy ! Total flux subtracted in 200 components = 0.0158262 Jy ! Clean residual min=-0.004041 max=0.003596 Jy/beam ! Clean residual mean=0.000004 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.0777886 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 34 components and 0.0777886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106616Jy sigma=0.000632 ! Fit after self-cal, rms=0.106586Jy sigma=0.000632 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.06 KP 1.03 ! LA 1.04 MK 1.09 NL 1.08 OV 0.96 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.04 ! LA 0.93 MK 1.08 NL 0.99 OV 1.01 ! PT 0.97 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 1.02 ! LA 0.97 MK 0.98 NL 1.09 OV 0.97 ! PT 0.94 SC 1.08 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.106586Jy sigma=0.000632 ! Fit after self-cal, rms=0.108316Jy sigma=0.000632 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=7.703 mas, bpa=-7.69 degrees ! Estimated noise=1472.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000629394 Jy ! Component: 100 - total flux cleaned = 0.000669387 Jy ! Component: 150 - total flux cleaned = 0.000645019 Jy ! Component: 200 - total flux cleaned = 0.000622841 Jy ! Total flux subtracted in 200 components = 0.000622841 Jy ! Clean residual min=-0.003359 max=0.003272 Jy/beam ! Clean residual mean=0.000011 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.0784114 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0784114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108295Jy sigma=0.000632 ! Fit after self-cal, rms=0.108350Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108350Jy sigma=0.000631 ! Fit after self-cal, rms=0.108962Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=7.77 mas, bpa=-7.836 degrees ! Estimated noise=1478.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000563444 Jy ! Component: 100 - total flux cleaned = 0.000623016 Jy ! Component: 150 - total flux cleaned = 0.000691022 Jy ! Component: 200 - total flux cleaned = 0.00072923 Jy ! Total flux subtracted in 200 components = 0.00072923 Jy ! Clean residual min=-0.003538 max=0.003214 Jy/beam ! Clean residual mean=0.000013 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.0791407 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.0791407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108944Jy sigma=0.000631 ! Fit after self-cal, rms=0.108974Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175351 Jy ! Component: 100 - total flux cleaned = 0.000196364 Jy ! Component: 150 - total flux cleaned = 0.000215126 Jy ! Component: 200 - total flux cleaned = 0.000250494 Jy ! Total flux subtracted in 200 components = 0.000250494 Jy ! Clean residual min=-0.003542 max=0.003370 Jy/beam ! Clean residual mean=0.000013 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.0793912 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.0793912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108965Jy sigma=0.000630 ! Fit after self-cal, rms=0.108965Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108965Jy sigma=0.000630 ! Fit after self-cal, rms=0.109294Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=7.819 mas, bpa=-8.028 degrees ! Estimated noise=1477.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203984 Jy ! Component: 100 - total flux cleaned = 0.00025897 Jy ! Component: 150 - total flux cleaned = 0.00032233 Jy ! Component: 200 - total flux cleaned = 0.0003805 Jy ! Total flux subtracted in 200 components = 0.0003805 Jy ! Clean residual min=-0.003592 max=0.003335 Jy/beam ! Clean residual mean=0.000013 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.0797717 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.0797717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109279Jy sigma=0.000630 ! Fit after self-cal, rms=0.109296Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.6815e-05 Jy ! Component: 100 - total flux cleaned = 8.62296e-05 Jy ! Component: 150 - total flux cleaned = 0.00010376 Jy ! Component: 200 - total flux cleaned = 0.000136711 Jy ! Total flux subtracted in 200 components = 0.000136711 Jy ! Clean residual min=-0.003619 max=0.003380 Jy/beam ! Clean residual mean=0.000013 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.0799084 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.0799084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109288Jy sigma=0.000630 ! Fit after self-cal, rms=0.109288Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109288Jy sigma=0.000630 ! Fit after self-cal, rms=0.109368Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.266 mas, bmaj=18.52 mas, bpa=-6.014 degrees ! Estimated noise=1915.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000839826 Jy ! Component: 100 - total flux cleaned = 0.000840064 Jy ! Component: 150 - total flux cleaned = 0.000866451 Jy ! Component: 200 - total flux cleaned = 0.000890138 Jy ! Total flux subtracted in 200 components = 0.000890138 Jy ! Clean residual min=-0.003377 max=0.003076 Jy/beam ! Clean residual mean=0.000030 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.0807985 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 57 components and 0.0807985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109362Jy sigma=0.000630 ! Fit after self-cal, rms=0.109366Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200667 Jy ! Component: 100 - total flux cleaned = 0.000184976 Jy ! Component: 150 - total flux cleaned = 0.000173178 Jy ! Component: 200 - total flux cleaned = 0.000163246 Jy ! Total flux subtracted in 200 components = 0.000163246 Jy ! Clean residual min=-0.003383 max=0.003114 Jy/beam ! Clean residual mean=0.000030 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.0809618 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.0809618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109366Jy sigma=0.000630 ! Fit after self-cal, rms=0.109352Jy sigma=0.000630 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=7.852 mas, bpa=-8.188 degrees ! Estimated noise=1476.98 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.886 x 7.852 at -8.188 degrees (North through East) ! Clean map min=-0.0033337 max=0.064356 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.427 mas, bmaj=6.801 mas, bpa=-7.785 degrees ! Estimated noise=2128.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0513533 Jy ! Component: 100 - total flux cleaned = 0.065248 Jy ! Component: 150 - total flux cleaned = 0.0714062 Jy ! Component: 200 - total flux cleaned = 0.0745605 Jy ! Total flux subtracted in 200 components = 0.0745605 Jy ! Clean residual min=-0.004709 max=0.005580 Jy/beam ! Clean residual mean=0.000006 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.0745605 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0745605 Jy ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=7.852 mas, bpa=-8.188 degrees ! Estimated noise=1476.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345669 Jy ! Component: 100 - total flux cleaned = 0.00467234 Jy ! Component: 150 - total flux cleaned = 0.00487324 Jy ! Component: 200 - total flux cleaned = 0.00504106 Jy ! Total flux subtracted in 200 components = 0.00504106 Jy ! Clean residual min=-0.003732 max=0.003295 Jy/beam ! Clean residual mean=0.000011 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.0796015 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 32 components and 0.0796015 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.266 mas, bmaj=18.52 mas, bpa=-6.014 degrees ! Estimated noise=1915.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010789 Jy ! Component: 100 - total flux cleaned = 0.00129178 Jy ! Component: 150 - total flux cleaned = 0.00130722 Jy ! Component: 200 - total flux cleaned = 0.0013216 Jy ! Total flux subtracted in 200 components = 0.0013216 Jy ! Clean residual min=-0.003353 max=0.003052 Jy/beam ! Clean residual mean=0.000030 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.0809231 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.62222e-05 Jy ! Component: 100 - total flux cleaned = 3.85112e-05 Jy ! Component: 150 - total flux cleaned = 6.09231e-05 Jy ! Component: 200 - total flux cleaned = 7.17614e-05 Jy ! Total flux subtracted in 200 components = 7.17614e-05 Jy ! Clean residual min=-0.003354 max=0.003082 Jy/beam ! Clean residual mean=0.000030 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.0809949 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.0809949 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=7.852 mas, bpa=-8.188 degrees ! Estimated noise=1476.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000240396 Jy ! Component: 100 - total flux cleaned = -0.000272925 Jy ! Component: 150 - total flux cleaned = -0.000297478 Jy ! Component: 200 - total flux cleaned = -0.000297574 Jy ! Total flux subtracted in 200 components = -0.000297574 Jy ! Clean residual min=-0.003672 max=0.003217 Jy/beam ! Clean residual mean=0.000014 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.0806973 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.0806973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109348Jy sigma=0.000630 ! Fit after self-cal, rms=0.109336Jy sigma=0.000630 wmodel J0601-2736_S_2017_07_16_pus_map.mod ! Writing 47 model components to file: J0601-2736_S_2017_07_16_pus_map.mod wobs J0601-2736_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0601-2736_S_2017_07_16_pus_uvs.fits wwins J0601-2736_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0601-2736_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000483525 Jy ! Component: 100 - total flux cleaned = -0.000592486 Jy ! Component: 150 - total flux cleaned = -0.000858614 Jy ! Component: 200 - total flux cleaned = -0.00106154 Jy ! Component: 250 - total flux cleaned = -0.00135474 Jy ! Component: 300 - total flux cleaned = -0.00130921 Jy ! Component: 350 - total flux cleaned = -0.00126368 Jy ! Component: 400 - total flux cleaned = -0.00104208 Jy ! Component: 450 - total flux cleaned = -0.000826358 Jy ! Component: 500 - total flux cleaned = -0.000615871 Jy ! Component: 550 - total flux cleaned = -0.000370373 Jy ! Component: 600 - total flux cleaned = -0.000130867 Jy ! Component: 650 - total flux cleaned = -9.14873e-05 Jy ! Component: 700 - total flux cleaned = 0.000176552 Jy ! Component: 750 - total flux cleaned = 0.000288153 Jy ! Component: 800 - total flux cleaned = 0.000397257 Jy ! Component: 850 - total flux cleaned = 0.0004697 Jy ! Component: 900 - total flux cleaned = 0.00064627 Jy ! Component: 950 - total flux cleaned = 0.00078409 Jy ! Component: 1000 - total flux cleaned = 0.00102037 Jy ! Component: 1050 - total flux cleaned = 0.00121848 Jy ! Component: 1100 - total flux cleaned = 0.00131574 Jy ! Component: 1150 - total flux cleaned = 0.00153877 Jy ! Component: 1200 - total flux cleaned = 0.00169485 Jy ! Component: 1250 - total flux cleaned = 0.00181771 Jy ! Component: 1300 - total flux cleaned = 0.00202868 Jy ! Component: 1350 - total flux cleaned = 0.00217664 Jy ! Component: 1400 - total flux cleaned = 0.00238022 Jy ! Component: 1450 - total flux cleaned = 0.00249426 Jy ! Component: 1500 - total flux cleaned = 0.00260615 Jy ! Component: 1550 - total flux cleaned = 0.00271657 Jy ! Component: 1600 - total flux cleaned = 0.00274437 Jy ! Component: 1650 - total flux cleaned = 0.00293119 Jy ! Component: 1700 - total flux cleaned = 0.00298364 Jy ! Component: 1750 - total flux cleaned = 0.00303586 Jy ! Component: 1800 - total flux cleaned = 0.00316389 Jy ! Component: 1850 - total flux cleaned = 0.00328966 Jy ! Component: 1900 - total flux cleaned = 0.00331426 Jy ! Component: 1950 - total flux cleaned = 0.00341186 Jy ! Component: 2000 - total flux cleaned = 0.00345998 Jy ! Component: 2050 - total flux cleaned = 0.00348363 Jy ! Component: 2100 - total flux cleaned = 0.00350693 Jy ! Component: 2150 - total flux cleaned = 0.00355341 Jy ! Component: 2200 - total flux cleaned = 0.00359902 Jy ! Component: 2250 - total flux cleaned = 0.00357619 Jy ! Component: 2300 - total flux cleaned = 0.00357619 Jy ! Component: 2350 - total flux cleaned = 0.00357601 Jy ! Component: 2400 - total flux cleaned = 0.00359793 Jy ! Component: 2450 - total flux cleaned = 0.00359796 Jy ! Component: 2500 - total flux cleaned = 0.00359804 Jy ! Component: 2550 - total flux cleaned = 0.00357713 Jy ! Component: 2600 - total flux cleaned = 0.0035564 Jy ! Component: 2650 - total flux cleaned = 0.00359757 Jy ! Component: 2700 - total flux cleaned = 0.00353573 Jy ! Component: 2750 - total flux cleaned = 0.00357676 Jy ! Component: 2800 - total flux cleaned = 0.00353642 Jy ! Component: 2850 - total flux cleaned = 0.00359628 Jy ! Component: 2900 - total flux cleaned = 0.00357645 Jy ! Component: 2950 - total flux cleaned = 0.00357634 Jy ! Component: 3000 - total flux cleaned = 0.00359566 Jy ! Component: 3050 - total flux cleaned = 0.0035378 Jy ! Component: 3100 - total flux cleaned = 0.00355712 Jy ! Component: 3150 - total flux cleaned = 0.00357617 Jy ! Component: 3200 - total flux cleaned = 0.00357618 Jy ! Component: 3250 - total flux cleaned = 0.00363211 Jy ! Component: 3300 - total flux cleaned = 0.00368755 Jy ! Component: 3350 - total flux cleaned = 0.00370575 Jy ! Component: 3400 - total flux cleaned = 0.00374214 Jy ! Component: 3450 - total flux cleaned = 0.00368785 Jy ! Component: 3500 - total flux cleaned = 0.00374181 Jy ! Component: 3550 - total flux cleaned = 0.00374183 Jy ! Component: 3600 - total flux cleaned = 0.00374193 Jy ! Component: 3650 - total flux cleaned = 0.00374208 Jy ! Component: 3700 - total flux cleaned = 0.00377729 Jy ! Component: 3750 - total flux cleaned = 0.00377731 Jy ! Component: 3800 - total flux cleaned = 0.00375981 Jy ! Component: 3850 - total flux cleaned = 0.00374265 Jy ! Component: 3900 - total flux cleaned = 0.00379423 Jy ! Component: 3950 - total flux cleaned = 0.00381126 Jy ! Component: 4000 - total flux cleaned = 0.0037941 Jy ! Component: 4050 - total flux cleaned = 0.00376022 Jy ! Total flux subtracted in 4096 components = 0.00372652 Jy ! Clean residual min=-0.000897 max=0.001001 Jy/beam ! Clean residual mean=0.000006 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.0844239 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 302 components and 0.0844239 Jy ![Exited script file: muppet] wmap "J0601-2736_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.886 x 7.852 at -8.188 degrees (North through East) ! Clean map min=-0.0019184 max=0.06403 Jy/beam ! Writing clean map to FITS file: J0601-2736_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0640298 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000286048 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.34022 1.34022 2.68045 5.3609 10.7218 21.4436 42.8872 85.7744 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.886 x 7.852 at -8.188 degrees (North through East) ! Clean map min=-0.0019184 max=0.06403 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0601-2736_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:02:41 2019