! Started logfile: J0559-4529_S_2017_10_21_pus_uvs.log on Sat May 11 20:51:56 2019 obs J0559-4529_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0559-4529_S_2017_10_21_pus_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.273592 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0559-4529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 2876 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0559-4529_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 367 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 657 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.777822Jy sigma=0.004934 ! Fit after self-cal, rms=0.694604Jy sigma=0.004388 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=13.54 mas, bmaj=168.8 mas, bpa=-9.399 degrees ! Estimated noise=3237.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.24103 Jy ! Component: 100 - total flux cleaned = 0.293592 Jy ! Total flux subtracted in 100 components = 0.293592 Jy ! Clean residual min=-0.011457 max=0.014662 Jy/beam ! Clean residual mean=-0.000573 rms=0.004870 Jy/beam ! Combined flux in latest and established models = 0.293592 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.293592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127565Jy sigma=0.000749 ! Fit after self-cal, rms=0.127561Jy sigma=0.000749 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=15.93 mas, bmaj=149.9 mas, bpa=-10.07 degrees ! Estimated noise=2641.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170407 Jy ! Component: 100 - total flux cleaned = 0.0204973 Jy ! Component: 150 - total flux cleaned = 0.0204692 Jy ! Component: 200 - total flux cleaned = 0.019962 Jy ! Total flux subtracted in 200 components = 0.019962 Jy ! Clean residual min=-0.007834 max=0.007820 Jy/beam ! Clean residual mean=-0.000270 rms=0.002889 Jy/beam ! Combined flux in latest and established models = 0.313554 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 47 components and 0.313553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123061Jy sigma=0.000732 ! Fit after self-cal, rms=0.122894Jy sigma=0.000731 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.04 ! LA 1.08 MK 1.00* NL 1.00* OV 0.99 ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.02 ! LA 0.98 MK 1.00* NL 1.00* OV 0.98 ! PT 1.01 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 0.98 ! LA 0.77 MK 1.00* NL 1.00* OV 1.00* ! PT 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.122894Jy sigma=0.000731 ! Fit after self-cal, rms=0.114011Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=15.89 mas, bmaj=148.7 mas, bpa=-10 degrees ! Estimated noise=2617.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.36462e-05 Jy ! Component: 100 - total flux cleaned = 0.00055648 Jy ! Component: 150 - total flux cleaned = 0.000479492 Jy ! Component: 200 - total flux cleaned = 0.000169351 Jy ! Total flux subtracted in 200 components = 0.000169351 Jy ! Clean residual min=-0.001311 max=0.001293 Jy/beam ! Clean residual mean=-0.000010 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.313723 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 116 components and 0.313723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113882Jy sigma=0.000708 ! Fit after self-cal, rms=0.113778Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113778Jy sigma=0.000708 ! Fit after self-cal, rms=0.113539Jy sigma=0.000708 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.9 mas, bmaj=148.7 mas, bpa=-10.01 degrees ! Estimated noise=2611.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590883 Jy ! Component: 100 - total flux cleaned = 0.000660121 Jy ! Component: 150 - total flux cleaned = 0.00072194 Jy ! Component: 200 - total flux cleaned = 0.000872052 Jy ! Total flux subtracted in 200 components = 0.000872052 Jy ! Clean residual min=-0.000509 max=0.000507 Jy/beam ! Clean residual mean=0.000000 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.314595 Jy selfcal ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 190 components and 0.314595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113523Jy sigma=0.000708 ! Fit after self-cal, rms=0.113525Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127844 Jy ! Component: 100 - total flux cleaned = -7.76516e-05 Jy ! Component: 150 - total flux cleaned = -0.000229706 Jy ! Component: 200 - total flux cleaned = -0.000431526 Jy ! Total flux subtracted in 200 components = -0.000431526 Jy ! Clean residual min=-0.000431 max=0.000428 Jy/beam ! Clean residual mean=0.000004 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.314163 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 244 components and 0.314163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113516Jy sigma=0.000708 ! Fit after self-cal, rms=0.113516Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113516Jy sigma=0.000708 ! Fit after self-cal, rms=0.113483Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.9 mas, bmaj=148.7 mas, bpa=-10.01 degrees ! Estimated noise=2611.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340334 Jy ! Component: 100 - total flux cleaned = 0.000363228 Jy ! Component: 150 - total flux cleaned = 0.000294505 Jy ! Component: 200 - total flux cleaned = 0.000225374 Jy ! Total flux subtracted in 200 components = 0.000225374 Jy ! Clean residual min=-0.000408 max=0.000405 Jy/beam ! Clean residual mean=0.000003 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.314389 Jy selfcal ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 299 components and 0.314389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113475Jy sigma=0.000708 ! Fit after self-cal, rms=0.113474Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379413 Jy ! Component: 100 - total flux cleaned = 0.000486769 Jy ! Component: 150 - total flux cleaned = 0.000486663 Jy ! Component: 200 - total flux cleaned = 0.000229765 Jy ! Total flux subtracted in 200 components = 0.000229765 Jy ! Clean residual min=-0.000364 max=0.000363 Jy/beam ! Clean residual mean=0.000004 rms=0.000158 Jy/beam ! Combined flux in latest and established models = 0.314618 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 348 components and 0.314618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113468Jy sigma=0.000708 ! Fit after self-cal, rms=0.113468Jy sigma=0.000708 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113468Jy sigma=0.000708 ! Fit after self-cal, rms=0.113454Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=16.42 mas, bmaj=147.4 mas, bpa=-10.07 degrees ! Estimated noise=2612.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.21034e-05 Jy ! Component: 100 - total flux cleaned = 1.86073e-05 Jy ! Component: 150 - total flux cleaned = -0.000122325 Jy ! Component: 200 - total flux cleaned = -0.000332438 Jy ! Total flux subtracted in 200 components = -0.000332438 Jy ! Clean residual min=-0.000364 max=0.000360 Jy/beam ! Clean residual mean=0.000004 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.314286 Jy selfcal ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 393 components and 0.314286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113448Jy sigma=0.000708 ! Fit after self-cal, rms=0.113449Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428132 Jy ! Component: 100 - total flux cleaned = 0.00066229 Jy ! Component: 150 - total flux cleaned = 0.000720663 Jy ! Component: 200 - total flux cleaned = 0.000584385 Jy ! Total flux subtracted in 200 components = 0.000584385 Jy ! Clean residual min=-0.000330 max=0.000326 Jy/beam ! Clean residual mean=0.000004 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.31487 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 436 components and 0.31487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113443Jy sigma=0.000707 ! Fit after self-cal, rms=0.113442Jy sigma=0.000707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=15.89 mas, bmaj=148.8 mas, bpa=-10.02 degrees ! Estimated noise=2610.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 15.89 x 148.8 at -10.02 degrees (North through East) ! Clean map min=-0.0061074 max=0.30262 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.49 mas, bmaj=167.8 mas, bpa=-9.354 degrees ! Estimated noise=3187.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.236968 Jy ! Component: 100 - total flux cleaned = 0.288652 Jy ! Component: 150 - total flux cleaned = 0.30205 Jy ! Component: 200 - total flux cleaned = 0.310707 Jy ! Total flux subtracted in 200 components = 0.310707 Jy ! Clean residual min=-0.005557 max=0.005617 Jy/beam ! Clean residual mean=-0.000326 rms=0.002267 Jy/beam ! Combined flux in latest and established models = 0.310707 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.310707 Jy ! Inverting map and beam ! Estimated beam: bmin=15.89 mas, bmaj=148.8 mas, bpa=-10.02 degrees ! Estimated noise=2610.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0089468 Jy ! Component: 100 - total flux cleaned = 0.0111066 Jy ! Component: 150 - total flux cleaned = 0.0113339 Jy ! Component: 200 - total flux cleaned = 0.0111251 Jy ! Total flux subtracted in 200 components = 0.0111251 Jy ! Clean residual min=-0.003320 max=0.003307 Jy/beam ! Clean residual mean=-0.000168 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.321832 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 102 components and 0.321832 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=16.42 mas, bmaj=147.4 mas, bpa=-10.07 degrees ! Estimated noise=2612.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266757 Jy ! Component: 100 - total flux cleaned = -0.00334585 Jy ! Component: 150 - total flux cleaned = -0.00307439 Jy ! Component: 200 - total flux cleaned = -0.00307329 Jy ! Total flux subtracted in 200 components = -0.00307329 Jy ! Clean residual min=-0.001068 max=0.001071 Jy/beam ! Clean residual mean=-0.000050 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.318759 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199204 Jy ! Component: 100 - total flux cleaned = -0.000409287 Jy ! Component: 150 - total flux cleaned = -0.000781761 Jy ! Component: 200 - total flux cleaned = -0.00125411 Jy ! Total flux subtracted in 200 components = -0.00125411 Jy ! Clean residual min=-0.001346 max=0.001359 Jy/beam ! Clean residual mean=-0.000030 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.317505 Jy ! Adding 139 model components to the UV plane model. ! The established model now contains 241 components and 0.317505 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=15.89 mas, bmaj=148.8 mas, bpa=-10.02 degrees ! Estimated noise=2610.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000877906 Jy ! Component: 100 - total flux cleaned = -0.00121889 Jy ! Component: 150 - total flux cleaned = -0.00122336 Jy ! Component: 200 - total flux cleaned = -0.00122292 Jy ! Total flux subtracted in 200 components = -0.00122292 Jy ! Clean residual min=-0.000580 max=0.000579 Jy/beam ! Clean residual mean=-0.000009 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.316282 Jy selfcal ! Performing phase self-cal ! Adding 92 model components to the UV plane model. ! The established model now contains 332 components and 0.316282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113464Jy sigma=0.000708 ! Fit after self-cal, rms=0.113465Jy sigma=0.000708 wmodel J0559-4529_S_2017_10_21_pus_map.mod ! Writing 332 model components to file: J0559-4529_S_2017_10_21_pus_map.mod wobs J0559-4529_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0559-4529_S_2017_10_21_pus_uvs.fits wwins J0559-4529_S_2017_10_21_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0559-4529_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 15.89 x 148.8 at -10.02 degrees (North through East) ! Clean map min=-0.0044697 max=0.30334 Jy/beam ! Writing clean map to FITS file: J0559-4529_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.303344 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000240307 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.237658 0.237658 0.475317 0.950633 1.90127 3.80253 7.60507 15.2101 30.4203 60.8405 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.303 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 15.89 x 148.8 at -10.02 degrees (North through East) ! Clean map min=-0.0044697 max=0.30334 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0559-4529_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:52:08 2019