! Started logfile: J0559-4529_S_2017_10_09_pus_uvs.log on Sun May 12 13:05:55 2019 obs J0559-4529_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0559-4529_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.341514 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0559-4529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 7180 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0559-4529_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 576 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 637 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 518 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 891 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.853220Jy sigma=0.004637 ! Fit after self-cal, rms=0.767115Jy sigma=0.004134 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.436 mas, bmaj=20.27 mas, bpa=-24.88 degrees ! Estimated noise=4590.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165194 Jy ! Component: 100 - total flux cleaned = 0.222352 Jy ! Total flux subtracted in 100 components = 0.222352 Jy ! Clean residual min=-0.016702 max=0.026617 Jy/beam ! Clean residual mean=-0.000667 rms=0.006467 Jy/beam ! Combined flux in latest and established models = 0.222352 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.222352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154322Jy sigma=0.000745 ! Fit after self-cal, rms=0.154393Jy sigma=0.000744 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=24.84 mas, bpa=-24.77 degrees ! Estimated noise=1885.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545016 Jy ! Component: 100 - total flux cleaned = 0.0805607 Jy ! Component: 150 - total flux cleaned = 0.0941762 Jy ! Component: 200 - total flux cleaned = 0.101816 Jy ! Total flux subtracted in 200 components = 0.101816 Jy ! Clean residual min=-0.007063 max=0.006057 Jy/beam ! Clean residual mean=-0.000149 rms=0.002302 Jy/beam ! Combined flux in latest and established models = 0.324168 Jy ! Performing phase self-cal ! Adding 112 model components to the UV plane model. ! The established model now contains 149 components and 0.324168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134552Jy sigma=0.000636 ! Fit after self-cal, rms=0.134496Jy sigma=0.000636 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 1.06 ! LA 1.05 MK 1.00 NL 2.57 OV 1.00* ! PT 1.05 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.99 ! LA 0.99 MK 1.02 NL 1.00* OV 1.00* ! PT 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.88 ! LA 0.78 MK 1.03 NL 1.16 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 423 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.134496Jy sigma=0.000636 ! Fit after self-cal, rms=0.132880Jy sigma=0.000616 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=25.94 mas, bpa=-24.88 degrees ! Estimated noise=1994.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000666445 Jy ! Component: 100 - total flux cleaned = -0.000807855 Jy ! Component: 150 - total flux cleaned = -0.000937904 Jy ! Component: 200 - total flux cleaned = -0.00101821 Jy ! Total flux subtracted in 200 components = -0.00101821 Jy ! Clean residual min=-0.004861 max=0.005053 Jy/beam ! Clean residual mean=-0.000009 rms=0.001392 Jy/beam ! Combined flux in latest and established models = 0.32315 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 166 components and 0.32315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132836Jy sigma=0.000616 ! Fit after self-cal, rms=0.132772Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132772Jy sigma=0.000615 ! Fit after self-cal, rms=0.134343Jy sigma=0.000614 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=25.99 mas, bpa=-24.84 degrees ! Estimated noise=1995.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000427779 Jy ! Component: 100 - total flux cleaned = -0.000469684 Jy ! Component: 150 - total flux cleaned = -0.000471336 Jy ! Component: 200 - total flux cleaned = -0.000510246 Jy ! Total flux subtracted in 200 components = -0.000510246 Jy ! Clean residual min=-0.004429 max=0.004644 Jy/beam ! Clean residual mean=-0.000002 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.32264 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 173 components and 0.32264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134303Jy sigma=0.000614 ! Fit after self-cal, rms=0.134296Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.19534e-05 Jy ! Component: 100 - total flux cleaned = -8.67562e-05 Jy ! Component: 150 - total flux cleaned = -8.72426e-05 Jy ! Component: 200 - total flux cleaned = -0.000119351 Jy ! Total flux subtracted in 200 components = -0.000119351 Jy ! Clean residual min=-0.004362 max=0.004551 Jy/beam ! Clean residual mean=-0.000003 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.32252 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 175 components and 0.32252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134267Jy sigma=0.000614 ! Fit after self-cal, rms=0.134252Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134252Jy sigma=0.000614 ! Fit after self-cal, rms=0.135197Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=26.01 mas, bpa=-24.84 degrees ! Estimated noise=1996.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000353448 Jy ! Component: 100 - total flux cleaned = -0.000463681 Jy ! Component: 150 - total flux cleaned = -0.000497895 Jy ! Component: 200 - total flux cleaned = -0.000529967 Jy ! Total flux subtracted in 200 components = -0.000529967 Jy ! Clean residual min=-0.004245 max=0.004456 Jy/beam ! Clean residual mean=-0.000002 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.321991 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 175 components and 0.321991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135165Jy sigma=0.000614 ! Fit after self-cal, rms=0.135160Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.30783e-05 Jy ! Component: 100 - total flux cleaned = -7.30247e-05 Jy ! Component: 150 - total flux cleaned = -0.000103723 Jy ! Component: 200 - total flux cleaned = -0.000131244 Jy ! Total flux subtracted in 200 components = -0.000131244 Jy ! Clean residual min=-0.004238 max=0.004418 Jy/beam ! Clean residual mean=-0.000004 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.321859 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 176 components and 0.321859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135137Jy sigma=0.000614 ! Fit after self-cal, rms=0.135124Jy sigma=0.000614 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135124Jy sigma=0.000614 ! Fit after self-cal, rms=0.136099Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.23 mas, bmaj=58.87 mas, bpa=-16.08 degrees ! Estimated noise=2417.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299523 Jy ! Component: 100 - total flux cleaned = -0.000322161 Jy ! Component: 150 - total flux cleaned = -0.000343631 Jy ! Component: 200 - total flux cleaned = -0.000364994 Jy ! Total flux subtracted in 200 components = -0.000364994 Jy ! Clean residual min=-0.004425 max=0.003850 Jy/beam ! Clean residual mean=0.000001 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.321494 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 180 components and 0.321494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136087Jy sigma=0.000614 ! Fit after self-cal, rms=0.136093Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.69838e-05 Jy ! Component: 100 - total flux cleaned = 6.7065e-06 Jy ! Component: 150 - total flux cleaned = -1.28692e-05 Jy ! Component: 200 - total flux cleaned = -3.11909e-05 Jy ! Total flux subtracted in 200 components = -3.11909e-05 Jy ! Clean residual min=-0.004418 max=0.003834 Jy/beam ! Clean residual mean=0.000001 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.321463 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 194 components and 0.321463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136086Jy sigma=0.000614 ! Fit after self-cal, rms=0.136079Jy sigma=0.000614 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=26.02 mas, bpa=-24.83 degrees ! Estimated noise=1998.22 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.236 x 26.02 at -24.83 degrees (North through East) ! Clean map min=-0.004156 max=0.16188 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=21.28 mas, bpa=-25.34 degrees ! Estimated noise=5406.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178019 Jy ! Component: 100 - total flux cleaned = 0.233092 Jy ! Component: 150 - total flux cleaned = 0.2624 Jy ! Component: 200 - total flux cleaned = 0.281624 Jy ! Total flux subtracted in 200 components = 0.281624 Jy ! Clean residual min=-0.009459 max=0.010940 Jy/beam ! Clean residual mean=-0.000281 rms=0.003051 Jy/beam ! Combined flux in latest and established models = 0.281624 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 71 model components to the UV plane model. ! The established model now contains 71 components and 0.281624 Jy ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=26.02 mas, bpa=-24.83 degrees ! Estimated noise=1998.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205334 Jy ! Component: 100 - total flux cleaned = 0.0298694 Jy ! Component: 150 - total flux cleaned = 0.0347531 Jy ! Component: 200 - total flux cleaned = 0.037452 Jy ! Total flux subtracted in 200 components = 0.037452 Jy ! Clean residual min=-0.004075 max=0.004099 Jy/beam ! Clean residual mean=-0.000040 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.319076 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 156 components and 0.319076 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.23 mas, bmaj=58.87 mas, bpa=-16.08 degrees ! Estimated noise=2417.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183371 Jy ! Component: 100 - total flux cleaned = 0.00233422 Jy ! Component: 150 - total flux cleaned = 0.00240677 Jy ! Component: 200 - total flux cleaned = 0.00247328 Jy ! Total flux subtracted in 200 components = 0.00247328 Jy ! Clean residual min=-0.004302 max=0.003928 Jy/beam ! Clean residual mean=0.000002 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.321549 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.10124e-05 Jy ! Component: 100 - total flux cleaned = 0.000116991 Jy ! Component: 150 - total flux cleaned = 0.000169497 Jy ! Component: 200 - total flux cleaned = 0.000202806 Jy ! Total flux subtracted in 200 components = 0.000202806 Jy ! Clean residual min=-0.004349 max=0.003960 Jy/beam ! Clean residual mean=0.000007 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.321752 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 178 components and 0.321752 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=26.02 mas, bpa=-24.83 degrees ! Estimated noise=1998.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116107 Jy ! Component: 100 - total flux cleaned = 0.000209446 Jy ! Component: 150 - total flux cleaned = 0.000293908 Jy ! Component: 200 - total flux cleaned = 0.00033378 Jy ! Total flux subtracted in 200 components = 0.00033378 Jy ! Clean residual min=-0.004070 max=0.004484 Jy/beam ! Clean residual mean=0.000009 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.322085 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 191 components and 0.322085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135959Jy sigma=0.000613 ! Fit after self-cal, rms=0.135670Jy sigma=0.000613 wmodel J0559-4529_S_2017_10_09_pus_map.mod ! Writing 191 model components to file: J0559-4529_S_2017_10_09_pus_map.mod wobs J0559-4529_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0559-4529_S_2017_10_09_pus_uvs.fits wwins J0559-4529_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0559-4529_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 7.92785e-06 Jy ! Component: 100 - total flux cleaned = 0.00040014 Jy ! Component: 150 - total flux cleaned = 0.000463133 Jy ! Component: 200 - total flux cleaned = 0.000196796 Jy ! Component: 250 - total flux cleaned = -0.000252962 Jy ! Component: 300 - total flux cleaned = -0.000627314 Jy ! Component: 350 - total flux cleaned = -0.00106861 Jy ! Component: 400 - total flux cleaned = -0.00140503 Jy ! Component: 450 - total flux cleaned = -0.00168667 Jy ! Component: 500 - total flux cleaned = -0.0018793 Jy ! Component: 550 - total flux cleaned = -0.00199024 Jy ! Component: 600 - total flux cleaned = -0.0021316 Jy ! Component: 650 - total flux cleaned = -0.00219913 Jy ! Component: 700 - total flux cleaned = -0.00229967 Jy ! Component: 750 - total flux cleaned = -0.0023325 Jy ! Component: 800 - total flux cleaned = -0.0022082 Jy ! Component: 850 - total flux cleaned = -0.00202513 Jy ! Component: 900 - total flux cleaned = -0.00187594 Jy ! Component: 950 - total flux cleaned = -0.00173003 Jy ! Component: 1000 - total flux cleaned = -0.00161548 Jy ! Component: 1050 - total flux cleaned = -0.00144644 Jy ! Component: 1100 - total flux cleaned = -0.00125235 Jy ! Component: 1150 - total flux cleaned = -0.00108849 Jy ! Component: 1200 - total flux cleaned = -0.000980891 Jy ! Component: 1250 - total flux cleaned = -0.000874668 Jy ! Component: 1300 - total flux cleaned = -0.000900746 Jy ! Component: 1350 - total flux cleaned = -0.000874379 Jy ! Component: 1400 - total flux cleaned = -0.000822842 Jy ! Component: 1450 - total flux cleaned = -0.000822765 Jy ! Component: 1500 - total flux cleaned = -0.00084808 Jy ! Component: 1550 - total flux cleaned = -0.000772646 Jy ! Component: 1600 - total flux cleaned = -0.000772795 Jy ! Component: 1650 - total flux cleaned = -0.000747952 Jy ! Component: 1700 - total flux cleaned = -0.000575537 Jy ! Component: 1750 - total flux cleaned = -0.000526428 Jy ! Component: 1800 - total flux cleaned = -0.000428813 Jy ! Component: 1850 - total flux cleaned = -0.000355869 Jy ! Component: 1900 - total flux cleaned = -0.000234967 Jy ! Component: 1950 - total flux cleaned = -0.000114551 Jy ! Component: 2000 - total flux cleaned = 2.95446e-05 Jy ! Component: 2050 - total flux cleaned = 0.000221615 Jy ! Component: 2100 - total flux cleaned = 0.000341437 Jy ! Component: 2150 - total flux cleaned = 0.000461255 Jy ! Component: 2200 - total flux cleaned = 0.000485186 Jy ! Component: 2250 - total flux cleaned = 0.000605298 Jy ! Component: 2300 - total flux cleaned = 0.000629502 Jy ! Component: 2350 - total flux cleaned = 0.000701711 Jy ! Component: 2400 - total flux cleaned = 0.000701584 Jy ! Component: 2450 - total flux cleaned = 0.000701592 Jy ! Component: 2500 - total flux cleaned = 0.000677375 Jy ! Component: 2550 - total flux cleaned = 0.000725954 Jy ! Component: 2600 - total flux cleaned = 0.000725967 Jy ! Component: 2650 - total flux cleaned = 0.000677177 Jy ! Component: 2700 - total flux cleaned = 0.000652851 Jy ! Component: 2750 - total flux cleaned = 0.0006528 Jy ! Component: 2800 - total flux cleaned = 0.000628238 Jy ! Component: 2850 - total flux cleaned = 0.00062841 Jy ! Component: 2900 - total flux cleaned = 0.000628518 Jy ! Component: 2950 - total flux cleaned = 0.000628789 Jy ! Component: 3000 - total flux cleaned = 0.000579134 Jy ! Component: 3050 - total flux cleaned = 0.000579232 Jy ! Component: 3100 - total flux cleaned = 0.000579148 Jy ! Component: 3150 - total flux cleaned = 0.000528656 Jy ! Component: 3200 - total flux cleaned = 0.000553878 Jy ! Component: 3250 - total flux cleaned = 0.000605033 Jy ! Component: 3300 - total flux cleaned = 0.000554138 Jy ! Component: 3350 - total flux cleaned = 0.000528288 Jy ! Component: 3400 - total flux cleaned = 0.00057991 Jy ! Component: 3450 - total flux cleaned = 0.000554011 Jy ! Component: 3500 - total flux cleaned = 0.000554289 Jy ! Component: 3550 - total flux cleaned = 0.000527942 Jy ! Component: 3600 - total flux cleaned = 0.000527692 Jy ! Component: 3650 - total flux cleaned = 0.000501445 Jy ! Component: 3700 - total flux cleaned = 0.000501214 Jy ! Component: 3750 - total flux cleaned = 0.0005545 Jy ! Component: 3800 - total flux cleaned = 0.00055458 Jy ! Component: 3850 - total flux cleaned = 0.000554403 Jy ! Component: 3900 - total flux cleaned = 0.000527068 Jy ! Component: 3950 - total flux cleaned = 0.000554159 Jy ! Component: 4000 - total flux cleaned = 0.000609242 Jy ! Component: 4050 - total flux cleaned = 0.000636962 Jy ! Total flux subtracted in 4096 components = 0.00066475 Jy ! Clean residual min=-0.001493 max=0.001502 Jy/beam ! Clean residual mean=0.000018 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.32275 Jy keep ! Adding 215 model components to the UV plane model. ! The established model now contains 406 components and 0.32275 Jy ![Exited script file: muppet] wmap "J0559-4529_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.236 x 26.02 at -24.83 degrees (North through East) ! Clean map min=-0.0045079 max=0.17767 Jy/beam ! Writing clean map to FITS file: J0559-4529_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.177667 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000546338 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.922518 0.922518 1.84504 3.69007 7.38015 14.7603 29.5206 59.0412 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.177 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.236 x 26.02 at -24.83 degrees (North through East) ! Clean map min=-0.0045079 max=0.17767 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0559-4529_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:06:00 2019