! Started logfile: J0558-1317_S_2017_04_28_pus_uvs.log on Thu May 2 16:18:03 2019 obs J0558-1317_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0558-1317_S_2017_04_28_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.943434 visibilities/baseline/integration-bin. ! Found source: J0558-1317 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 9340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0558-1317_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.533868Jy sigma=0.556019 ! Fit after self-cal, rms=0.516679Jy sigma=0.556015 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.08 mas, bmaj=11.12 mas, bpa=2.809 degrees ! Estimated noise=232.226 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0517697 Jy ! Component: 100 - total flux cleaned = 0.076063 Jy ! Total flux subtracted in 100 components = 0.076063 Jy ! Clean residual min=-0.035376 max=0.041840 Jy/beam ! Clean residual mean=-0.000124 rms=0.017358 Jy/beam ! Combined flux in latest and established models = 0.076063 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.076063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.564832Jy sigma=0.017502 ! Fit after self-cal, rms=0.564651Jy sigma=0.017488 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.364 mas, bmaj=11.27 mas, bpa=4.704 degrees ! Estimated noise=235.213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0625439 Jy ! Component: 100 - total flux cleaned = 0.110357 Jy ! Component: 150 - total flux cleaned = 0.139549 Jy ! Component: 200 - total flux cleaned = 0.159528 Jy ! Total flux subtracted in 200 components = 0.159528 Jy ! Clean residual min=-0.050938 max=0.062103 Jy/beam ! Clean residual mean=-0.000170 rms=0.026155 Jy/beam ! Combined flux in latest and established models = 0.235591 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.235591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489026Jy sigma=0.030253 ! Fit after self-cal, rms=0.488917Jy sigma=0.030247 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.28 FD 0.45 HN 0.74 KP 0.58 ! LA 0.56 MK 0.80 NL 0.58 OV 0.51 ! PT 0.61 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.30 FD 0.41 HN 0.76 KP 0.55 ! LA 0.54 MK 0.81 NL 0.69 OV 0.50 ! PT 0.61 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.30 FD 0.46 HN 0.76 KP 0.57 ! LA 0.55 MK 0.81 NL 0.65 OV 0.46 ! PT 0.59 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 13.65 FD 0.50 HN 0.87 KP 1.00* ! LA 52.21 MK 0.75 NL 1.00* OV 1.00* ! PT 0.60 SC 1.00* ! ! ! Fit before self-cal, rms=0.488917Jy sigma=0.030247 ! Fit after self-cal, rms=32.274269Jy sigma=0.001713 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=9.171 mas, bpa=0.1525 degrees ! Estimated noise=408.826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000961228 Jy ! Component: 100 - total flux cleaned = -0.00205853 Jy ! Component: 150 - total flux cleaned = -0.00276766 Jy ! Component: 200 - total flux cleaned = -0.00231352 Jy ! Total flux subtracted in 200 components = -0.00231352 Jy ! Clean residual min=-0.011808 max=0.016005 Jy/beam ! Clean residual mean=-0.000010 rms=0.002996 Jy/beam ! Combined flux in latest and established models = 0.233277 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.233277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=32.270527Jy sigma=0.001281 ! Fit after self-cal, rms=32.269974Jy sigma=0.001216 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=32.269974Jy sigma=0.001216 ! Fit after self-cal, rms=1.092608Jy sigma=0.000984 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=8.786 mas, bpa=-2.053 degrees ! Estimated noise=404.078 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157398 Jy ! Component: 100 - total flux cleaned = -0.00156568 Jy ! Component: 150 - total flux cleaned = -0.00177527 Jy ! Component: 200 - total flux cleaned = -0.00194071 Jy ! Total flux subtracted in 200 components = -0.00194071 Jy ! Clean residual min=-0.008680 max=0.007270 Jy/beam ! Clean residual mean=0.000001 rms=0.001833 Jy/beam ! Combined flux in latest and established models = 0.231337 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.231337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.092502Jy sigma=0.000909 ! Fit after self-cal, rms=1.092435Jy sigma=0.000905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.66048e-05 Jy ! Component: 100 - total flux cleaned = -0.000242112 Jy ! Component: 150 - total flux cleaned = -0.00036422 Jy ! Component: 200 - total flux cleaned = -0.000363603 Jy ! Total flux subtracted in 200 components = -0.000363603 Jy ! Clean residual min=-0.008129 max=0.006599 Jy/beam ! Clean residual mean=0.000001 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.230973 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.230973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.092395Jy sigma=0.000893 ! Fit after self-cal, rms=1.092400Jy sigma=0.000892 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.092400Jy sigma=0.000892 ! Fit after self-cal, rms=1.087811Jy sigma=0.000867 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=8.777 mas, bpa=-2.126 degrees ! Estimated noise=412.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141228 Jy ! Component: 100 - total flux cleaned = -0.00141108 Jy ! Component: 150 - total flux cleaned = -0.000963931 Jy ! Component: 200 - total flux cleaned = -0.000591549 Jy ! Total flux subtracted in 200 components = -0.000591549 Jy ! Clean residual min=-0.006915 max=0.006014 Jy/beam ! Clean residual mean=-0.000001 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.230382 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.230382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.087789Jy sigma=0.000834 ! Fit after self-cal, rms=1.087774Jy sigma=0.000833 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340792 Jy ! Component: 100 - total flux cleaned = 0.000240009 Jy ! Component: 150 - total flux cleaned = 0.000235613 Jy ! Component: 200 - total flux cleaned = 0.000148007 Jy ! Total flux subtracted in 200 components = 0.000148007 Jy ! Clean residual min=-0.006618 max=0.005697 Jy/beam ! Clean residual mean=-0.000000 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.23053 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.23053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.087745Jy sigma=0.000826 ! Fit after self-cal, rms=1.087746Jy sigma=0.000826 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.087746Jy sigma=0.000826 ! Fit after self-cal, rms=1.099545Jy sigma=0.000812 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.929 mas, bmaj=14.81 mas, bpa=4.037 degrees ! Estimated noise=454.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242811 Jy ! Component: 100 - total flux cleaned = 0.00258719 Jy ! Component: 150 - total flux cleaned = 0.00241453 Jy ! Component: 200 - total flux cleaned = 0.00212638 Jy ! Total flux subtracted in 200 components = 0.00212638 Jy ! Clean residual min=-0.005889 max=0.005522 Jy/beam ! Clean residual mean=0.000001 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.232656 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.232656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.099469Jy sigma=0.000799 ! Fit after self-cal, rms=1.099480Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034577 Jy ! Component: 100 - total flux cleaned = -0.000560906 Jy ! Component: 150 - total flux cleaned = -0.000755838 Jy ! Component: 200 - total flux cleaned = -0.000889859 Jy ! Total flux subtracted in 200 components = -0.000889859 Jy ! Clean residual min=-0.005677 max=0.005401 Jy/beam ! Clean residual mean=0.000001 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.231766 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.231766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.099501Jy sigma=0.000796 ! Fit after self-cal, rms=1.099505Jy sigma=0.000796 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=8.772 mas, bpa=-2.122 degrees ! Estimated noise=416.964 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 8.772 at -2.122 degrees (North through East) ! Clean map min=-0.0067398 max=0.16673 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.881 mas, bmaj=7.393 mas, bpa=-3.986 degrees ! Estimated noise=657.295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13879 Jy ! Component: 100 - total flux cleaned = 0.174213 Jy ! Component: 150 - total flux cleaned = 0.192922 Jy ! Component: 200 - total flux cleaned = 0.20339 Jy ! Total flux subtracted in 200 components = 0.20339 Jy ! Clean residual min=-0.006678 max=0.010289 Jy/beam ! Clean residual mean=-0.000013 rms=0.001662 Jy/beam ! Combined flux in latest and established models = 0.20339 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.20339 Jy ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=8.772 mas, bpa=-2.122 degrees ! Estimated noise=416.964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120645 Jy ! Component: 100 - total flux cleaned = 0.0174311 Jy ! Component: 150 - total flux cleaned = 0.0207687 Jy ! Component: 200 - total flux cleaned = 0.0230468 Jy ! Total flux subtracted in 200 components = 0.0230468 Jy ! Clean residual min=-0.004542 max=0.007478 Jy/beam ! Clean residual mean=-0.000004 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.226437 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 59 components and 0.226437 Jy ! Inverting map ! Added new window around map position (18, -58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499404 Jy ! Component: 100 - total flux cleaned = 0.00603837 Jy ! Component: 150 - total flux cleaned = 0.00693637 Jy ! Component: 200 - total flux cleaned = 0.00762947 Jy ! Total flux subtracted in 200 components = 0.00762947 Jy ! Clean residual min=-0.004116 max=0.004577 Jy/beam ! Clean residual mean=-0.000002 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.234067 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.234067 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.929 mas, bmaj=14.81 mas, bpa=4.037 degrees ! Estimated noise=454.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196298 Jy ! Component: 100 - total flux cleaned = 0.00234628 Jy ! Component: 150 - total flux cleaned = 0.00268953 Jy ! Component: 200 - total flux cleaned = 0.00294152 Jy ! Total flux subtracted in 200 components = 0.00294152 Jy ! Clean residual min=-0.004250 max=0.004545 Jy/beam ! Clean residual mean=0.000001 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.237008 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116449 Jy ! Component: 100 - total flux cleaned = 0.000224598 Jy ! Component: 150 - total flux cleaned = 0.000328089 Jy ! Component: 200 - total flux cleaned = 0.000425876 Jy ! Total flux subtracted in 200 components = 0.000425876 Jy ! Clean residual min=-0.004139 max=0.004449 Jy/beam ! Clean residual mean=0.000001 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.237434 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 104 components and 0.237434 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=8.772 mas, bpa=-2.122 degrees ! Estimated noise=416.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000759436 Jy ! Component: 100 - total flux cleaned = -0.000679908 Jy ! Component: 150 - total flux cleaned = -0.000683479 Jy ! Component: 200 - total flux cleaned = -0.000684063 Jy ! Total flux subtracted in 200 components = -0.000684063 Jy ! Clean residual min=-0.003855 max=0.004420 Jy/beam ! Clean residual mean=0.000000 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.23675 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 124 components and 0.23675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.099301Jy sigma=0.000761 ! Fit after self-cal, rms=1.099244Jy sigma=0.000758 wmodel J0558-1317_S_2017_04_28_pus_map.mod ! Writing 124 model components to file: J0558-1317_S_2017_04_28_pus_map.mod wobs J0558-1317_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0558-1317_S_2017_04_28_pus_uvs.fits wwins J0558-1317_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0558-1317_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000584321 Jy ! Component: 100 - total flux cleaned = 0.000650603 Jy ! Component: 150 - total flux cleaned = 0.000709988 Jy ! Component: 200 - total flux cleaned = 0.00070847 Jy ! Component: 250 - total flux cleaned = 0.000708132 Jy ! Component: 300 - total flux cleaned = 0.00081488 Jy ! Component: 350 - total flux cleaned = 0.000865321 Jy ! Component: 400 - total flux cleaned = 0.000765674 Jy ! Component: 450 - total flux cleaned = 0.000669331 Jy ! Component: 500 - total flux cleaned = 0.000808881 Jy ! Component: 550 - total flux cleaned = 0.000900639 Jy ! Component: 600 - total flux cleaned = 0.00103342 Jy ! Component: 650 - total flux cleaned = 0.00103392 Jy ! Component: 700 - total flux cleaned = 0.00107604 Jy ! Component: 750 - total flux cleaned = 0.00103401 Jy ! Component: 800 - total flux cleaned = 0.00103441 Jy ! Component: 850 - total flux cleaned = 0.00107374 Jy ! Component: 900 - total flux cleaned = 0.00111294 Jy ! Component: 950 - total flux cleaned = 0.00122775 Jy ! Component: 1000 - total flux cleaned = 0.00111542 Jy ! Component: 1050 - total flux cleaned = 0.00118891 Jy ! Component: 1100 - total flux cleaned = 0.001007 Jy ! Component: 1150 - total flux cleaned = 0.000864782 Jy ! Component: 1200 - total flux cleaned = 0.000830319 Jy ! Component: 1250 - total flux cleaned = 0.000796002 Jy ! Component: 1300 - total flux cleaned = 0.000762741 Jy ! Component: 1350 - total flux cleaned = 0.000729392 Jy ! Component: 1400 - total flux cleaned = 0.000762097 Jy ! Component: 1450 - total flux cleaned = 0.000859145 Jy ! Component: 1500 - total flux cleaned = 0.000793795 Jy ! Component: 1550 - total flux cleaned = 0.000857404 Jy ! Component: 1600 - total flux cleaned = 0.00091941 Jy ! Component: 1650 - total flux cleaned = 0.000919336 Jy ! Component: 1700 - total flux cleaned = 0.000949111 Jy ! Component: 1750 - total flux cleaned = 0.00106938 Jy ! Component: 1800 - total flux cleaned = 0.00109864 Jy ! Component: 1850 - total flux cleaned = 0.00109823 Jy ! Component: 1900 - total flux cleaned = 0.00118458 Jy ! Component: 1950 - total flux cleaned = 0.00124122 Jy ! Component: 2000 - total flux cleaned = 0.0012693 Jy ! Component: 2050 - total flux cleaned = 0.0012973 Jy ! Component: 2100 - total flux cleaned = 0.00140844 Jy ! Component: 2150 - total flux cleaned = 0.00138105 Jy ! Component: 2200 - total flux cleaned = 0.00140869 Jy ! Component: 2250 - total flux cleaned = 0.00151539 Jy ! Component: 2300 - total flux cleaned = 0.00156809 Jy ! Component: 2350 - total flux cleaned = 0.00156803 Jy ! Component: 2400 - total flux cleaned = 0.00169698 Jy ! Component: 2450 - total flux cleaned = 0.00164626 Jy ! Component: 2500 - total flux cleaned = 0.00184841 Jy ! Component: 2550 - total flux cleaned = 0.00189803 Jy ! Component: 2600 - total flux cleaned = 0.00197187 Jy ! Component: 2650 - total flux cleaned = 0.00194715 Jy ! Component: 2700 - total flux cleaned = 0.0020439 Jy ! Component: 2750 - total flux cleaned = 0.00216388 Jy ! Component: 2800 - total flux cleaned = 0.0021878 Jy ! Component: 2850 - total flux cleaned = 0.00232882 Jy ! Component: 2900 - total flux cleaned = 0.00244524 Jy ! Component: 2950 - total flux cleaned = 0.00246818 Jy ! Component: 3000 - total flux cleaned = 0.00260487 Jy ! Component: 3050 - total flux cleaned = 0.00262713 Jy ! Component: 3100 - total flux cleaned = 0.00269378 Jy ! Component: 3150 - total flux cleaned = 0.00267165 Jy ! Component: 3200 - total flux cleaned = 0.00278107 Jy ! Component: 3250 - total flux cleaned = 0.00288963 Jy ! Component: 3300 - total flux cleaned = 0.00293249 Jy ! Component: 3350 - total flux cleaned = 0.00301785 Jy ! Component: 3400 - total flux cleaned = 0.00303908 Jy ! Component: 3450 - total flux cleaned = 0.00310193 Jy ! Component: 3500 - total flux cleaned = 0.00314341 Jy ! Component: 3550 - total flux cleaned = 0.00318457 Jy ! Component: 3600 - total flux cleaned = 0.00326639 Jy ! Component: 3650 - total flux cleaned = 0.00332702 Jy ! Component: 3700 - total flux cleaned = 0.00338749 Jy ! Component: 3750 - total flux cleaned = 0.00346711 Jy ! Component: 3800 - total flux cleaned = 0.00344723 Jy ! Component: 3850 - total flux cleaned = 0.00346724 Jy ! Component: 3900 - total flux cleaned = 0.00350618 Jy ! Component: 3950 - total flux cleaned = 0.00352574 Jy ! Component: 4000 - total flux cleaned = 0.00356452 Jy ! Component: 4050 - total flux cleaned = 0.00360283 Jy ! Total flux subtracted in 4096 components = 0.00364067 Jy ! Clean residual min=-0.001105 max=0.001011 Jy/beam ! Clean residual mean=0.000005 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.240391 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 439 components and 0.240391 Jy ![Exited script file: muppet] wmap "J0558-1317_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 8.772 at -2.122 degrees (North through East) ! Clean map min=-0.0044529 max=0.1679 Jy/beam ! Writing clean map to FITS file: J0558-1317_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.167902 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000354084 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.632664 0.632664 1.26533 2.53066 5.06131 10.1226 20.2453 40.4905 80.981 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.167 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 8.772 at -2.122 degrees (North through East) ! Clean map min=-0.0044529 max=0.1679 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0558-1317_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:18:07 2019