! Started logfile: J0558+3418_S_2017_04_28_pus_uvs.log on Thu May 2 16:18:08 2019 obs J0558+3418_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0558+3418_S_2017_04_28_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.895503 visibilities/baseline/integration-bin. ! Found source: J0558+3418 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0558+3418_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 380 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.727050Jy sigma=0.030383 ! Fit after self-cal, rms=0.717700Jy sigma=0.030338 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=5.277 mas, bpa=3.43 degrees ! Estimated noise=697.217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137021 Jy ! Component: 100 - total flux cleaned = 0.187176 Jy ! Total flux subtracted in 100 components = 0.187176 Jy ! Clean residual min=-0.059750 max=0.060219 Jy/beam ! Clean residual mean=0.000003 rms=0.020473 Jy/beam ! Combined flux in latest and established models = 0.187176 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.187176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175500Jy sigma=0.004338 ! Fit after self-cal, rms=0.175528Jy sigma=0.004333 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=5.711 mas, bpa=-2.458 degrees ! Estimated noise=606.109 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048048 Jy ! Component: 100 - total flux cleaned = 0.0737157 Jy ! Component: 150 - total flux cleaned = 0.0888863 Jy ! Component: 200 - total flux cleaned = 0.093133 Jy ! Total flux subtracted in 200 components = 0.093133 Jy ! Clean residual min=-0.051749 max=0.051046 Jy/beam ! Clean residual mean=0.000003 rms=0.015618 Jy/beam ! Combined flux in latest and established models = 0.280309 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.280309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142589Jy sigma=0.005075 ! Fit after self-cal, rms=0.142605Jy sigma=0.005074 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.89 HN 0.73 KP 0.89 ! LA 0.95 MK 0.83 NL 0.85 OV 0.89 ! PT 1.03 SC 0.74 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.82 HN 0.78 KP 0.85 ! LA 0.91 MK 0.82 NL 1.07 OV 0.87 ! PT 1.01 SC 0.80 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.86 HN 0.75 KP 0.91 ! LA 0.93 MK 0.86 NL 1.07 OV 0.84 ! PT 0.98 SC 0.79 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 43.24 FD 0.96 HN 0.78 KP 1.00* ! LA 0.81 MK 1.15 NL 1.00* OV 1.00* ! PT 1.13 SC 1.00* ! ! ! Fit before self-cal, rms=0.142605Jy sigma=0.005074 ! Fit after self-cal, rms=1.957782Jy sigma=0.000881 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=5.745 mas, bpa=-4.521 degrees ! Estimated noise=634.027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0138952 Jy ! Component: 100 - total flux cleaned = -0.0153781 Jy ! Component: 150 - total flux cleaned = -0.0172185 Jy ! Component: 200 - total flux cleaned = -0.0194317 Jy ! Total flux subtracted in 200 components = -0.0194317 Jy ! Clean residual min=-0.008458 max=0.007778 Jy/beam ! Clean residual mean=0.000022 rms=0.001747 Jy/beam ! Combined flux in latest and established models = 0.260877 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.260877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.955414Jy sigma=0.000829 ! Fit after self-cal, rms=1.955554Jy sigma=0.000798 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.955554Jy sigma=0.000798 ! Fit after self-cal, rms=2.481179Jy sigma=0.000735 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=5.752 mas, bpa=-4.651 degrees ! Estimated noise=630.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00549835 Jy ! Component: 100 - total flux cleaned = -0.00773179 Jy ! Component: 150 - total flux cleaned = -0.00916518 Jy ! Component: 200 - total flux cleaned = -0.0102174 Jy ! Total flux subtracted in 200 components = -0.0102174 Jy ! Clean residual min=-0.004865 max=0.004457 Jy/beam ! Clean residual mean=-0.000000 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.25066 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.25066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.480630Jy sigma=0.000725 ! Fit after self-cal, rms=2.480689Jy sigma=0.000725 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000901511 Jy ! Component: 100 - total flux cleaned = -0.00155642 Jy ! Component: 150 - total flux cleaned = -0.0021255 Jy ! Component: 200 - total flux cleaned = -0.00262177 Jy ! Total flux subtracted in 200 components = -0.00262177 Jy ! Clean residual min=-0.004673 max=0.004445 Jy/beam ! Clean residual mean=0.000000 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.248038 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.248038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.480409Jy sigma=0.000723 ! Fit after self-cal, rms=2.480412Jy sigma=0.000723 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.480412Jy sigma=0.000723 ! Fit after self-cal, rms=0.089820Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=5.795 mas, bpa=-4.432 degrees ! Estimated noise=631.447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00329676 Jy ! Component: 100 - total flux cleaned = -0.00408252 Jy ! Component: 150 - total flux cleaned = -0.00474157 Jy ! Component: 200 - total flux cleaned = -0.00524026 Jy ! Total flux subtracted in 200 components = -0.00524026 Jy ! Clean residual min=-0.002267 max=0.002476 Jy/beam ! Clean residual mean=0.000001 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.242798 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.242798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089611Jy sigma=0.000676 ! Fit after self-cal, rms=0.089577Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, 35.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119916 Jy ! Component: 100 - total flux cleaned = 0.00098226 Jy ! Component: 150 - total flux cleaned = 0.000782473 Jy ! Component: 200 - total flux cleaned = 0.000554517 Jy ! Total flux subtracted in 200 components = 0.000554517 Jy ! Clean residual min=-0.002105 max=0.001971 Jy/beam ! Clean residual mean=0.000002 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.243352 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 52 components and 0.243352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089471Jy sigma=0.000675 ! Fit after self-cal, rms=0.089481Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089481Jy sigma=0.000675 ! Fit after self-cal, rms=0.089951Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.409 mas, bmaj=8.762 mas, bpa=-2.13 degrees ! Estimated noise=823.148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00241896 Jy ! Component: 100 - total flux cleaned = -0.00295755 Jy ! Component: 150 - total flux cleaned = -0.00313224 Jy ! Component: 200 - total flux cleaned = -0.00324279 Jy ! Total flux subtracted in 200 components = -0.00324279 Jy ! Clean residual min=-0.002536 max=0.002593 Jy/beam ! Clean residual mean=-0.000000 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.240109 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 0.240109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089860Jy sigma=0.000673 ! Fit after self-cal, rms=0.089859Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (109.5, -40.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183424 Jy ! Component: 100 - total flux cleaned = 0.00184779 Jy ! Component: 150 - total flux cleaned = 0.00150722 Jy ! Component: 200 - total flux cleaned = 0.00128287 Jy ! Total flux subtracted in 200 components = 0.00128287 Jy ! Clean residual min=-0.002309 max=0.001943 Jy/beam ! Clean residual mean=0.000001 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.241392 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 85 components and 0.241392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089843Jy sigma=0.000673 ! Fit after self-cal, rms=0.089844Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.435 mas, bmaj=5.816 mas, bpa=-4.269 degrees ! Estimated noise=632.706 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.435 x 5.816 at -4.269 degrees (North through East) ! Clean map min=-0.0016721 max=0.22187 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=5.043 mas, bpa=-3.703 degrees ! Estimated noise=875.224 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173473 Jy ! Component: 100 - total flux cleaned = 0.211313 Jy ! Component: 150 - total flux cleaned = 0.22132 Jy ! Component: 200 - total flux cleaned = 0.225653 Jy ! Total flux subtracted in 200 components = 0.225653 Jy ! Clean residual min=-0.002737 max=0.002994 Jy/beam ! Clean residual mean=0.000001 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.225652 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.225652 Jy ! Inverting map and beam ! Estimated beam: bmin=3.435 mas, bmaj=5.816 mas, bpa=-4.269 degrees ! Estimated noise=632.706 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439466 Jy ! Component: 100 - total flux cleaned = 0.00733578 Jy ! Component: 150 - total flux cleaned = 0.0096496 Jy ! Component: 200 - total flux cleaned = 0.0113201 Jy ! Total flux subtracted in 200 components = 0.0113201 Jy ! Clean residual min=-0.001888 max=0.001973 Jy/beam ! Clean residual mean=0.000002 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.236973 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 51 components and 0.236973 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.409 mas, bmaj=8.762 mas, bpa=-2.13 degrees ! Estimated noise=823.148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229942 Jy ! Component: 100 - total flux cleaned = 0.00309422 Jy ! Component: 150 - total flux cleaned = 0.00339381 Jy ! Component: 200 - total flux cleaned = 0.00355866 Jy ! Total flux subtracted in 200 components = 0.00355866 Jy ! Clean residual min=-0.002169 max=0.001709 Jy/beam ! Clean residual mean=0.000002 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.240531 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.42428e-05 Jy ! Component: 100 - total flux cleaned = -0.000207158 Jy ! Component: 150 - total flux cleaned = -0.000389229 Jy ! Component: 200 - total flux cleaned = -0.000583502 Jy ! Total flux subtracted in 200 components = -0.000583502 Jy ! Clean residual min=-0.002038 max=0.001714 Jy/beam ! Clean residual mean=0.000003 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.239948 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 127 components and 0.239948 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.435 mas, bmaj=5.816 mas, bpa=-4.269 degrees ! Estimated noise=632.706 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265077 Jy ! Component: 100 - total flux cleaned = 0.000307392 Jy ! Component: 150 - total flux cleaned = 0.000162056 Jy ! Component: 200 - total flux cleaned = -6.327e-06 Jy ! Total flux subtracted in 200 components = -6.327e-06 Jy ! Clean residual min=-0.001761 max=0.001830 Jy/beam ! Clean residual mean=0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.239942 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 150 components and 0.239942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089621Jy sigma=0.000672 ! Fit after self-cal, rms=0.089622Jy sigma=0.000672 wmodel J0558+3418_S_2017_04_28_pus_map.mod ! Writing 150 model components to file: J0558+3418_S_2017_04_28_pus_map.mod wobs J0558+3418_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0558+3418_S_2017_04_28_pus_uvs.fits wwins J0558+3418_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0558+3418_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.08673e-05 Jy ! Component: 100 - total flux cleaned = 0.00016028 Jy ! Component: 150 - total flux cleaned = 0.000301967 Jy ! Component: 200 - total flux cleaned = 0.000412251 Jy ! Component: 250 - total flux cleaned = 0.000518256 Jy ! Component: 300 - total flux cleaned = 0.000596414 Jy ! Component: 350 - total flux cleaned = 0.000723265 Jy ! Component: 400 - total flux cleaned = 0.000822395 Jy ! Component: 450 - total flux cleaned = 0.00087104 Jy ! Component: 500 - total flux cleaned = 0.000942838 Jy ! Component: 550 - total flux cleaned = 0.000989951 Jy ! Component: 600 - total flux cleaned = 0.00105937 Jy ! Component: 650 - total flux cleaned = 0.00115014 Jy ! Component: 700 - total flux cleaned = 0.00121708 Jy ! Component: 750 - total flux cleaned = 0.00123919 Jy ! Component: 800 - total flux cleaned = 0.001369 Jy ! Component: 850 - total flux cleaned = 0.00143262 Jy ! Component: 900 - total flux cleaned = 0.00149561 Jy ! Component: 950 - total flux cleaned = 0.00155776 Jy ! Component: 1000 - total flux cleaned = 0.00153757 Jy ! Component: 1050 - total flux cleaned = 0.00165916 Jy ! Component: 1100 - total flux cleaned = 0.00173897 Jy ! Component: 1150 - total flux cleaned = 0.00175923 Jy ! Component: 1200 - total flux cleaned = 0.00189584 Jy ! Component: 1250 - total flux cleaned = 0.00193445 Jy ! Component: 1300 - total flux cleaned = 0.00201067 Jy ! Component: 1350 - total flux cleaned = 0.00206736 Jy ! Component: 1400 - total flux cleaned = 0.00217928 Jy ! Component: 1450 - total flux cleaned = 0.00223444 Jy ! Component: 1500 - total flux cleaned = 0.00234434 Jy ! Component: 1550 - total flux cleaned = 0.00234464 Jy ! Component: 1600 - total flux cleaned = 0.00243469 Jy ! Component: 1650 - total flux cleaned = 0.00254182 Jy ! Component: 1700 - total flux cleaned = 0.00259523 Jy ! Component: 1750 - total flux cleaned = 0.00264768 Jy ! Component: 1800 - total flux cleaned = 0.00280413 Jy ! Component: 1850 - total flux cleaned = 0.00282147 Jy ! Component: 1900 - total flux cleaned = 0.00283874 Jy ! Component: 1950 - total flux cleaned = 0.00299136 Jy ! Component: 2000 - total flux cleaned = 0.00304198 Jy ! Component: 2050 - total flux cleaned = 0.00309199 Jy ! Component: 2100 - total flux cleaned = 0.00319165 Jy ! Component: 2150 - total flux cleaned = 0.00322447 Jy ! Component: 2200 - total flux cleaned = 0.00330623 Jy ! Component: 2250 - total flux cleaned = 0.00338727 Jy ! Component: 2300 - total flux cleaned = 0.00337112 Jy ! Component: 2350 - total flux cleaned = 0.00343523 Jy ! Component: 2400 - total flux cleaned = 0.00353085 Jy ! Component: 2450 - total flux cleaned = 0.00354678 Jy ! Component: 2500 - total flux cleaned = 0.0036251 Jy ! Component: 2550 - total flux cleaned = 0.00362523 Jy ! Component: 2600 - total flux cleaned = 0.00368724 Jy ! Component: 2650 - total flux cleaned = 0.0037797 Jy ! Component: 2700 - total flux cleaned = 0.00379501 Jy ! Component: 2750 - total flux cleaned = 0.00382533 Jy ! Component: 2800 - total flux cleaned = 0.00388569 Jy ! Component: 2850 - total flux cleaned = 0.00391573 Jy ! Component: 2900 - total flux cleaned = 0.0039306 Jy ! Component: 2950 - total flux cleaned = 0.00406396 Jy ! Component: 3000 - total flux cleaned = 0.00407863 Jy ! Component: 3050 - total flux cleaned = 0.00410789 Jy ! Component: 3100 - total flux cleaned = 0.00419525 Jy ! Component: 3150 - total flux cleaned = 0.00419533 Jy ! Component: 3200 - total flux cleaned = 0.00425285 Jy ! Component: 3250 - total flux cleaned = 0.00425275 Jy ! Component: 3300 - total flux cleaned = 0.00436652 Jy ! Component: 3350 - total flux cleaned = 0.00438065 Jy ! Component: 3400 - total flux cleaned = 0.00442282 Jy ! Component: 3450 - total flux cleaned = 0.00443688 Jy ! Component: 3500 - total flux cleaned = 0.00443687 Jy ! Component: 3550 - total flux cleaned = 0.00451985 Jy ! Component: 3600 - total flux cleaned = 0.00451976 Jy ! Component: 3650 - total flux cleaned = 0.00453345 Jy ! Component: 3700 - total flux cleaned = 0.00461527 Jy ! Component: 3750 - total flux cleaned = 0.00465594 Jy ! Component: 3800 - total flux cleaned = 0.00461549 Jy ! Component: 3850 - total flux cleaned = 0.00460221 Jy ! Component: 3900 - total flux cleaned = 0.00465565 Jy ! Component: 3950 - total flux cleaned = 0.00473525 Jy ! Component: 4000 - total flux cleaned = 0.00473507 Jy ! Component: 4050 - total flux cleaned = 0.00473503 Jy ! Total flux subtracted in 4096 components = 0.00473495 Jy ! Clean residual min=-0.000661 max=0.000751 Jy/beam ! Clean residual mean=0.000001 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.244676 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 457 components and 0.244677 Jy ![Exited script file: muppet] wmap "J0558+3418_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.435 x 5.816 at -4.269 degrees (North through East) ! Clean map min=-0.001478 max=0.22316 Jy/beam ! Writing clean map to FITS file: J0558+3418_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.223161 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236483 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.317909 0.317909 0.635817 1.27163 2.54327 5.08654 10.1731 20.3462 40.6923 81.3846 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.223 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.435 x 5.816 at -4.269 degrees (North through East) ! Clean map min=-0.001478 max=0.22316 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0558+3418_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:18:13 2019