! Started logfile: J0555+3948_X_2017_05_27_pus_uvs.log on Fri May 3 10:31:02 2019 obs J0555+3948_X_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0555+3948_X_2017_05_27_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.85 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1033 lines of history. ! ! Reading 11016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0555+3948_X_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.753623Jy sigma=0.015523 ! Fit after self-cal, rms=1.749644Jy sigma=0.015492 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7718 mas, bmaj=1.312 mas, bpa=-1.418 degrees ! Estimated noise=1133.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.7901 Jy ! Component: 100 - total flux cleaned = 2.50776 Jy ! Total flux subtracted in 100 components = 2.50776 Jy ! Clean residual min=-0.088497 max=0.327714 Jy/beam ! Clean residual mean=0.000529 rms=0.030471 Jy/beam ! Combined flux in latest and established models = 2.50776 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 2.50776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.628319Jy sigma=0.005635 ! Fit after self-cal, rms=0.621089Jy sigma=0.005581 ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.365193 Jy ! Component: 100 - total flux cleaned = 0.561283 Jy ! Total flux subtracted in 100 components = 0.561283 Jy ! Clean residual min=-0.042595 max=0.133670 Jy/beam ! Clean residual mean=0.000291 rms=0.013488 Jy/beam ! Combined flux in latest and established models = 3.06904 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 3.06904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.279684Jy sigma=0.002477 ! Fit after self-cal, rms=0.278419Jy sigma=0.002468 ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13288 Jy ! Component: 100 - total flux cleaned = 0.212029 Jy ! Total flux subtracted in 100 components = 0.212029 Jy ! Clean residual min=-0.032749 max=0.042611 Jy/beam ! Clean residual mean=0.000211 rms=0.008801 Jy/beam ! Combined flux in latest and established models = 3.28107 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 3.28107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.194647Jy sigma=0.001646 ! Fit after self-cal, rms=0.192650Jy sigma=0.001630 ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9502 mas, bmaj=1.585 mas, bpa=0.6752 degrees ! Estimated noise=787.892 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0676179 Jy ! Component: 100 - total flux cleaned = 0.106831 Jy ! Component: 150 - total flux cleaned = 0.131144 Jy ! Component: 200 - total flux cleaned = 0.146382 Jy ! Total flux subtracted in 200 components = 0.146382 Jy ! Clean residual min=-0.023484 max=0.026442 Jy/beam ! Clean residual mean=0.000389 rms=0.006955 Jy/beam ! Combined flux in latest and established models = 3.42746 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 40 components and 3.42746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169839Jy sigma=0.001372 ! Fit after self-cal, rms=0.169256Jy sigma=0.001367 ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.01 KP 0.97 ! LA 0.97 MK 0.99 NL 0.96 OV 0.99 ! PT 1.00 SC 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.98 KP 0.96 ! LA 0.97 MK 0.98 NL 0.96 OV 0.99 ! PT 1.00 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.99 KP 0.97 ! LA 1.00 MK 1.00 NL 0.96 OV 1.00 ! PT 1.02 SC 1.12 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.02 KP 0.97 ! LA 1.01 MK 1.00 NL 0.96 OV 1.00 ! PT 1.04 SC 1.13 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.98 KP 0.97 ! LA 0.99 MK 1.02 NL 0.96 OV 1.00 ! PT 1.04 SC 1.10 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.02 KP 0.97 ! LA 1.00 MK 1.00 NL 0.96 OV 1.00 ! PT 1.03 SC 1.11 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00 KP 0.97 ! LA 1.01 MK 1.02 NL 0.96 OV 1.00 ! PT 1.04 SC 1.13 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.00 KP 0.97 ! LA 0.99 MK 1.00 NL 0.97 OV 1.00 ! PT 1.05 SC 1.13 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.01 KP 0.97 ! LA 1.01 MK 0.99 NL 0.97 OV 1.01 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.01 KP 0.97 ! LA 1.02 MK 1.01 NL 0.97 OV 1.02 ! PT 1.05 SC 1.08 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.04 KP 0.97 ! LA 1.02 MK 0.99 NL 0.97 OV 1.00 ! PT 1.06 SC 1.10 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.02 KP 0.95 ! LA 1.01 MK 0.99 NL 0.98 OV 1.02 ! PT 1.06 SC 1.11 ! ! ! Fit before self-cal, rms=0.169256Jy sigma=0.001367 ! Fit after self-cal, rms=0.114978Jy sigma=0.000897 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9648 mas, bmaj=1.599 mas, bpa=-0.5328 degrees ! Estimated noise=796.039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00896655 Jy ! Component: 100 - total flux cleaned = -0.00761648 Jy ! Component: 150 - total flux cleaned = -0.00644441 Jy ! Component: 200 - total flux cleaned = -0.00509718 Jy ! Total flux subtracted in 200 components = -0.00509718 Jy ! Clean residual min=-0.015021 max=0.012392 Jy/beam ! Clean residual mean=0.000117 rms=0.003051 Jy/beam ! Combined flux in latest and established models = 3.42236 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 3.42236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111477Jy sigma=0.000871 ! Fit after self-cal, rms=0.111366Jy sigma=0.000870 ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111366Jy sigma=0.000870 ! Fit after self-cal, rms=0.097500Jy sigma=0.000750 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9607 mas, bmaj=1.597 mas, bpa=-0.09426 degrees ! Estimated noise=792.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233264 Jy ! Component: 100 - total flux cleaned = 0.00198844 Jy ! Component: 150 - total flux cleaned = 0.0014927 Jy ! Component: 200 - total flux cleaned = 0.00134444 Jy ! Total flux subtracted in 200 components = 0.00134444 Jy ! Clean residual min=-0.005561 max=0.005076 Jy/beam ! Clean residual mean=0.000064 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 3.4237 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 3.4237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096521Jy sigma=0.000742 ! Fit after self-cal, rms=0.096434Jy sigma=0.000741 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.61805e-05 Jy ! Component: 100 - total flux cleaned = -0.000123043 Jy ! Component: 150 - total flux cleaned = -0.00011945 Jy ! Component: 200 - total flux cleaned = -0.000122189 Jy ! Total flux subtracted in 200 components = -0.000122189 Jy ! Clean residual min=-0.005348 max=0.004916 Jy/beam ! Clean residual mean=0.000064 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 3.42358 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 3.42358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096066Jy sigma=0.000739 ! Fit after self-cal, rms=0.096036Jy sigma=0.000738 ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096036Jy sigma=0.000738 ! Fit after self-cal, rms=0.095944Jy sigma=0.000737 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9598 mas, bmaj=1.598 mas, bpa=-0.01528 degrees ! Estimated noise=792.756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178338 Jy ! Component: 100 - total flux cleaned = 0.00189878 Jy ! Component: 150 - total flux cleaned = 0.00189597 Jy ! Component: 200 - total flux cleaned = 0.00189543 Jy ! Total flux subtracted in 200 components = 0.00189543 Jy ! Clean residual min=-0.004986 max=0.004784 Jy/beam ! Clean residual mean=0.000065 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 3.42548 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 3.42548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095643Jy sigma=0.000735 ! Fit after self-cal, rms=0.095620Jy sigma=0.000735 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131211 Jy ! Component: 100 - total flux cleaned = -5.75534e-05 Jy ! Component: 150 - total flux cleaned = -5.7851e-05 Jy ! Component: 200 - total flux cleaned = 2.70964e-05 Jy ! Total flux subtracted in 200 components = 2.70964e-05 Jy ! Clean residual min=-0.004918 max=0.004770 Jy/beam ! Clean residual mean=0.000065 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 3.4255 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 3.4255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095451Jy sigma=0.000734 ! Fit after self-cal, rms=0.095439Jy sigma=0.000734 ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095439Jy sigma=0.000734 ! Fit after self-cal, rms=0.095440Jy sigma=0.000733 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.207 mas, bmaj=2.609 mas, bpa=-1.312 degrees ! Estimated noise=986.838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139695 Jy ! Component: 100 - total flux cleaned = 0.00120685 Jy ! Component: 150 - total flux cleaned = 0.00110773 Jy ! Component: 200 - total flux cleaned = 0.00108727 Jy ! Total flux subtracted in 200 components = 0.00108727 Jy ! Clean residual min=-0.003837 max=0.005141 Jy/beam ! Clean residual mean=0.000144 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 3.42659 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 62 components and 3.42659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095423Jy sigma=0.000733 ! Fit after self-cal, rms=0.095398Jy sigma=0.000733 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190041 Jy ! Component: 100 - total flux cleaned = 0.000189899 Jy ! Component: 150 - total flux cleaned = 0.0001603 Jy ! Component: 200 - total flux cleaned = 0.000137197 Jy ! Total flux subtracted in 200 components = 0.000137197 Jy ! Clean residual min=-0.003920 max=0.005128 Jy/beam ! Clean residual mean=0.000144 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 3.42673 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 3.42673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095398Jy sigma=0.000733 ! Fit after self-cal, rms=0.095381Jy sigma=0.000733 ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9596 mas, bmaj=1.598 mas, bpa=0.02296 degrees ! Estimated noise=792.78 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9596 x 1.598 at 0.02296 degrees (North through East) ! Clean map min=-0.0045778 max=2.3797 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095381Jy sigma=0.000733 ! Fit after self-cal, rms=0.078331Jy sigma=0.000629 ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9597 mas, bmaj=1.598 mas, bpa=0.03239 degrees ! Estimated noise=792.746 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000646844 Jy ! Component: 100 - total flux cleaned = 0.000854168 Jy ! Component: 150 - total flux cleaned = 0.000770329 Jy ! Component: 200 - total flux cleaned = 0.000770972 Jy ! Total flux subtracted in 200 components = 0.000770972 Jy ! Clean residual min=-0.004500 max=0.004337 Jy/beam ! Clean residual mean=0.000057 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 3.4275 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 3.4275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078085Jy sigma=0.000627 ! Fit after self-cal, rms=0.078067Jy sigma=0.000627 ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103236 Jy ! Component: 100 - total flux cleaned = 2.56016e-05 Jy ! Component: 150 - total flux cleaned = 2.86687e-05 Jy ! Component: 200 - total flux cleaned = 2.90268e-05 Jy ! Total flux subtracted in 200 components = 2.90268e-05 Jy ! Clean residual min=-0.004415 max=0.004296 Jy/beam ! Clean residual mean=0.000057 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 3.42753 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 3.42753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077921Jy sigma=0.000626 ! Fit after self-cal, rms=0.077913Jy sigma=0.000626 ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077913Jy sigma=0.000626 ! Fit after self-cal, rms=0.077898Jy sigma=0.000626 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7783 mas, bmaj=1.325 mas, bpa=-2.096 degrees ! Estimated noise=1144.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.80498 Jy ! Component: 100 - total flux cleaned = 2.52732 Jy ! Component: 150 - total flux cleaned = 2.8838 Jy ! Component: 200 - total flux cleaned = 3.07995 Jy ! Total flux subtracted in 200 components = 3.07995 Jy ! Clean residual min=-0.033998 max=0.098637 Jy/beam ! Clean residual mean=0.000164 rms=0.010039 Jy/beam ! Combined flux in latest and established models = 3.07995 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 3.07995 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9595 mas, bmaj=1.599 mas, bpa=0.0327 degrees ! Estimated noise=792.747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149743 Jy ! Component: 100 - total flux cleaned = 0.227794 Jy ! Component: 150 - total flux cleaned = 0.273092 Jy ! Component: 200 - total flux cleaned = 0.301191 Jy ! Total flux subtracted in 200 components = 0.301191 Jy ! Clean residual min=-0.007551 max=0.014873 Jy/beam ! Clean residual mean=0.000026 rms=0.002086 Jy/beam ! Combined flux in latest and established models = 3.38114 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 42 components and 3.38114 Jy ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (0.4, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179804 Jy ! Component: 100 - total flux cleaned = 0.0298658 Jy ! Component: 150 - total flux cleaned = 0.0337465 Jy ! Component: 200 - total flux cleaned = 0.0364402 Jy ! Total flux subtracted in 200 components = 0.0364402 Jy ! Clean residual min=-0.005636 max=0.006780 Jy/beam ! Clean residual mean=0.000050 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 3.41758 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 3.41758 Jy ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-1.2, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370128 Jy ! Component: 100 - total flux cleaned = 0.00514008 Jy ! Component: 150 - total flux cleaned = 0.00579246 Jy ! Component: 200 - total flux cleaned = 0.00619037 Jy ! Total flux subtracted in 200 components = 0.00619037 Jy ! Clean residual min=-0.005611 max=0.005844 Jy/beam ! Clean residual mean=0.000055 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 3.42377 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 3.42377 Jy ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-4.4, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354577 Jy ! Component: 100 - total flux cleaned = 0.00390537 Jy ! Component: 150 - total flux cleaned = 0.00390531 Jy ! Component: 200 - total flux cleaned = 0.00423747 Jy ! Total flux subtracted in 200 components = 0.00423747 Jy ! Clean residual min=-0.005206 max=0.004559 Jy/beam ! Clean residual mean=0.000058 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 3.42801 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 77 components and 3.42801 Jy ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.206 mas, bmaj=2.608 mas, bpa=-1.366 degrees ! Estimated noise=986.957 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.86336e-05 Jy ! Component: 100 - total flux cleaned = -0.000132539 Jy ! Component: 150 - total flux cleaned = -0.000303025 Jy ! Component: 200 - total flux cleaned = -0.000305797 Jy ! Total flux subtracted in 200 components = -0.000305797 Jy ! Clean residual min=-0.003625 max=0.004561 Jy/beam ! Clean residual mean=0.000123 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 3.42771 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.44024e-05 Jy ! Component: 100 - total flux cleaned = -0.00013636 Jy ! Component: 150 - total flux cleaned = -0.000175507 Jy ! Component: 200 - total flux cleaned = -0.000211712 Jy ! Total flux subtracted in 200 components = -0.000211712 Jy ! Clean residual min=-0.003508 max=0.004458 Jy/beam ! Clean residual mean=0.000120 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 3.42749 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 103 components and 3.42749 Jy ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9595 mas, bmaj=1.599 mas, bpa=0.0327 degrees ! Estimated noise=792.747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129874 Jy ! Component: 100 - total flux cleaned = -0.00114745 Jy ! Component: 150 - total flux cleaned = -0.00115114 Jy ! Component: 200 - total flux cleaned = -0.000999155 Jy ! Total flux subtracted in 200 components = -0.000999155 Jy ! Clean residual min=-0.004708 max=0.004435 Jy/beam ! Clean residual mean=0.000054 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 3.42649 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 110 components and 3.42649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079415Jy sigma=0.000635 ! Fit after self-cal, rms=0.079350Jy sigma=0.000635 wmodel J0555+3948_X_2017_05_27_pus_map.mod ! Writing 110 model components to file: J0555+3948_X_2017_05_27_pus_map.mod wobs J0555+3948_X_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0555+3948_X_2017_05_27_pus_uvs.fits wwins J0555+3948_X_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J0555+3948_X_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014507 Jy ! Component: 100 - total flux cleaned = 0.000756548 Jy ! Component: 150 - total flux cleaned = 0.001343 Jy ! Component: 200 - total flux cleaned = 0.00162708 Jy ! Component: 250 - total flux cleaned = 0.00197197 Jy ! Component: 300 - total flux cleaned = 0.00237399 Jy ! Component: 350 - total flux cleaned = 0.00276508 Jy ! Component: 400 - total flux cleaned = 0.00302042 Jy ! Component: 450 - total flux cleaned = 0.00339598 Jy ! Component: 500 - total flux cleaned = 0.00370148 Jy ! Component: 550 - total flux cleaned = 0.00394099 Jy ! Component: 600 - total flux cleaned = 0.00417581 Jy ! Component: 650 - total flux cleaned = 0.0042911 Jy ! Component: 700 - total flux cleaned = 0.00451934 Jy ! Component: 750 - total flux cleaned = 0.00468707 Jy ! Component: 800 - total flux cleaned = 0.00485334 Jy ! Component: 850 - total flux cleaned = 0.0050172 Jy ! Component: 900 - total flux cleaned = 0.00517828 Jy ! Component: 950 - total flux cleaned = 0.00538887 Jy ! Component: 1000 - total flux cleaned = 0.00538911 Jy ! Component: 1050 - total flux cleaned = 0.0058523 Jy ! Component: 1100 - total flux cleaned = 0.00580101 Jy ! Component: 1150 - total flux cleaned = 0.00615189 Jy ! Component: 1200 - total flux cleaned = 0.00639918 Jy ! Component: 1250 - total flux cleaned = 0.00674158 Jy ! Component: 1300 - total flux cleaned = 0.00707975 Jy ! Component: 1350 - total flux cleaned = 0.00746154 Jy ! Component: 1400 - total flux cleaned = 0.00765042 Jy ! Component: 1450 - total flux cleaned = 0.0079775 Jy ! Component: 1500 - total flux cleaned = 0.00843933 Jy ! Component: 1550 - total flux cleaned = 0.00866881 Jy ! Component: 1600 - total flux cleaned = 0.00894043 Jy ! Component: 1650 - total flux cleaned = 0.0093878 Jy ! Component: 1700 - total flux cleaned = 0.00974251 Jy ! Component: 1750 - total flux cleaned = 0.0100924 Jy ! Component: 1800 - total flux cleaned = 0.0103091 Jy ! Component: 1850 - total flux cleaned = 0.0105661 Jy ! Component: 1900 - total flux cleaned = 0.0108633 Jy ! Component: 1950 - total flux cleaned = 0.0112003 Jy ! Component: 2000 - total flux cleaned = 0.0114922 Jy ! Total flux subtracted in 2048 components = 0.0117394 Jy ! Clean residual min=-0.002055 max=0.002056 Jy/beam ! Clean residual mean=0.000030 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 3.43823 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 236 components and 3.43823 Jy ![Exited script file: muppet] wmap "J0555+3948_X_2017_05_27_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9595 x 1.599 at 0.0327 degrees (North through East) ! Clean map min=-0.0037448 max=2.3819 Jy/beam ! Writing clean map to FITS file: J0555+3948_X_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.38191 invert ! Inverting map ! Your choice of large map pixels excluded 0.127% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000721066 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0908178 0.0908178 0.181636 0.363271 0.726543 1.45309 2.90617 5.81234 11.6247 23.2494 46.4987 92.9974 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.381 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9595 x 1.599 at 0.0327 degrees (North through East) ! Clean map min=-0.0037448 max=2.3819 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0555+3948_X_2017_05_27_pus_uvs.log closed on Fri May 3 10:31:04 2019