! Started logfile: J0555+3948_X_2017_05_01_pus_uvs.log on Wed May  1 19:52:50 2019
obs J0555+3948_X_2017_05_01_pus_uva.fits
! Reading UV FITS file: J0555+3948_X_2017_05_01_pus_uva.fits
! AN table 1: 39 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.844444 visibilities/baseline/integration-bin.
! Found source: J0555+3948
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 863 lines of history.
! 
! Reading 17784 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0555+3948_X_2017_05_01_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.610729Jy  sigma=0.014331
! Fit after  self-cal, rms=1.607682Jy  sigma=0.014311
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=0.7919 mas, bmaj=1.264 mas, bpa=-4.633 degrees
! Estimated noise=1000.13 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.65891 Jy
! Component: 100  -  total flux cleaned = 2.33139 Jy
! Total flux subtracted in 100 components = 2.33139 Jy
! Clean residual min=-0.075272 max=0.309739 Jy/beam
! Clean residual mean=0.000351 rms=0.024475 Jy/beam
! Combined flux in latest and established models = 2.33139 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 2.33139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.705967Jy  sigma=0.005762
! Fit after  self-cal, rms=0.701880Jy  sigma=0.005730
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.34529 Jy
! Component: 100  -  total flux cleaned = 0.530156 Jy
! Total flux subtracted in 100 components = 0.530156 Jy
! Clean residual min=-0.036721 max=0.133290 Jy/beam
! Clean residual mean=0.000185 rms=0.012034 Jy/beam
! Combined flux in latest and established models = 2.86155 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 2.86155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.474550Jy  sigma=0.002860
! Fit after  self-cal, rms=0.473907Jy  sigma=0.002854
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Added new window around map position (-1.2, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131612 Jy
! Component: 100  -  total flux cleaned = 0.211572 Jy
! Total flux subtracted in 100 components = 0.211572 Jy
! Clean residual min=-0.032997 max=0.060773 Jy/beam
! Clean residual mean=0.000137 rms=0.009061 Jy/beam
! Combined flux in latest and established models = 3.07312 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 30 components and 3.07312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.422798Jy  sigma=0.002123
! Fit after  self-cal, rms=0.420834Jy  sigma=0.002096
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0614305 Jy
! Component: 100  -  total flux cleaned = 0.103228 Jy
! Total flux subtracted in 100 components = 0.103228 Jy
! Clean residual min=-0.032413 max=0.042490 Jy/beam
! Clean residual mean=0.000119 rms=0.008175 Jy/beam
! Combined flux in latest and established models = 3.17634 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 37 components and 3.17634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.405910Jy  sigma=0.001895
! Fit after  self-cal, rms=0.405406Jy  sigma=0.001887
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=0.9866 mas, bmaj=1.562 mas, bpa=-3.031 degrees
! Estimated noise=650.447 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0513234 Jy
! Component: 100  -  total flux cleaned = 0.0682051 Jy
! Component: 150  -  total flux cleaned = 0.0749041 Jy
! Component: 200  -  total flux cleaned = 0.0768559 Jy
! Total flux subtracted in 200 components = 0.0768559 Jy
! Clean residual min=-0.024263 max=0.030212 Jy/beam
! Clean residual mean=0.000253 rms=0.007111 Jy/beam
! Combined flux in latest and established models = 3.2532 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 63 components and 3.2532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.390987Jy  sigma=0.001784
! Fit after  self-cal, rms=0.390882Jy  sigma=0.001783
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        1.00     KP        0.98     
!   LA        0.95     MK        1.05     NL        0.95     OV        0.99     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        0.96     KP        0.97     
!   LA        0.96     MK        1.05     NL        0.96     OV        0.99     
!   PT        1.03     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.97     KP        0.97     
!   LA        0.98     MK        1.08     NL        0.96     OV        0.99     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        1.00     KP        0.98     
!   LA        0.99     MK        1.07     NL        0.95     OV        0.99     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        0.96     KP        0.98     
!   LA        0.98     MK        1.10     NL        0.98     OV        0.99     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        0.99     KP        0.98     
!   LA        0.99     MK        1.08     NL        0.99     OV        1.00     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        0.98     KP        0.99     
!   LA        1.00     MK        1.09     NL        0.98     OV        1.00     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        0.99     KP        0.98     
!   LA        0.98     MK        1.08     NL        0.99     OV        1.00     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.06     NL        0.98     OV        1.00     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        0.99     KP        0.99     
!   LA        1.01     MK        1.10     NL        0.99     OV        1.01     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.09     KP        1.05     
!   LA        1.06     MK        1.15     NL        1.05     OV        1.06     
!   PT        1.08     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        0.95     
!   LA        0.99     MK        1.06     NL        1.00     OV        1.01     
!   PT        1.04     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.390882Jy  sigma=0.001783
! Fit after  self-cal, rms=0.364903Jy  sigma=0.001377
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=1.006 mas, bmaj=1.578 mas, bpa=-2.426 degrees
! Estimated noise=651.129 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0051292 Jy
! Component: 100  -  total flux cleaned = 0.0059511 Jy
! Component: 150  -  total flux cleaned = 0.00889889 Jy
! Component: 200  -  total flux cleaned = 0.00888321 Jy
! Total flux subtracted in 200 components = 0.00888321 Jy
! Clean residual min=-0.022211 max=0.028128 Jy/beam
! Clean residual mean=0.000169 rms=0.005735 Jy/beam
! Combined flux in latest and established models = 3.26208 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 74 components and 3.26208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.357044Jy  sigma=0.001338
! Fit after  self-cal, rms=0.356997Jy  sigma=0.001337
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.356997Jy  sigma=0.001337
! Fit after  self-cal, rms=0.300787Jy  sigma=0.000853
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=1.006 mas, bmaj=1.58 mas, bpa=-4.09 degrees
! Estimated noise=654.711 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0107716 Jy
! Component: 100  -  total flux cleaned = -0.00905138 Jy
! Component: 150  -  total flux cleaned = -0.00760204 Jy
! Component: 200  -  total flux cleaned = -0.00675925 Jy
! Total flux subtracted in 200 components = -0.00675925 Jy
! Clean residual min=-0.008890 max=0.009460 Jy/beam
! Clean residual mean=0.000039 rms=0.002167 Jy/beam
! Combined flux in latest and established models = 3.25533 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 89 components and 3.25532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.299524Jy  sigma=0.000807
! Fit after  self-cal, rms=0.299522Jy  sigma=0.000806
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.8, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242466 Jy
! Component: 100  -  total flux cleaned = 0.00280705 Jy
! Component: 150  -  total flux cleaned = 0.00314419 Jy
! Component: 200  -  total flux cleaned = 0.00282997 Jy
! Total flux subtracted in 200 components = 0.00282997 Jy
! Clean residual min=-0.007862 max=0.008041 Jy/beam
! Clean residual mean=0.000046 rms=0.001974 Jy/beam
! Combined flux in latest and established models = 3.25815 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 98 components and 3.25815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.299066Jy  sigma=0.000786
! Fit after  self-cal, rms=0.299054Jy  sigma=0.000785
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.299054Jy  sigma=0.000785
! Fit after  self-cal, rms=0.337791Jy  sigma=0.000752
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=1.005 mas, bmaj=1.583 mas, bpa=-4.319 degrees
! Estimated noise=654.049 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00632708 Jy
! Component: 100  -  total flux cleaned = -0.00730296 Jy
! Component: 150  -  total flux cleaned = -0.00814859 Jy
! Component: 200  -  total flux cleaned = -0.00840847 Jy
! Total flux subtracted in 200 components = -0.00840847 Jy
! Clean residual min=-0.005563 max=0.006888 Jy/beam
! Clean residual mean=0.000029 rms=0.001443 Jy/beam
! Combined flux in latest and established models = 3.24975 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 107 components and 3.24975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.337202Jy  sigma=0.000735
! Fit after  self-cal, rms=0.337209Jy  sigma=0.000735
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187135 Jy
! Component: 100  -  total flux cleaned = 0.00209691 Jy
! Component: 150  -  total flux cleaned = 0.00253133 Jy
! Component: 200  -  total flux cleaned = 0.00314893 Jy
! Total flux subtracted in 200 components = 0.00314893 Jy
! Clean residual min=-0.005043 max=0.005497 Jy/beam
! Clean residual mean=0.000036 rms=0.001332 Jy/beam
! Combined flux in latest and established models = 3.25289 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 117 components and 3.25289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.336871Jy  sigma=0.000726
! Fit after  self-cal, rms=0.336869Jy  sigma=0.000726
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.336869Jy  sigma=0.000726
! Fit after  self-cal, rms=0.341982Jy  sigma=0.000723
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=2.333 mas, bmaj=2.604 mas, bpa=-6.703 degrees
! Estimated noise=777.33 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00327202 Jy
! Component: 100  -  total flux cleaned = -0.00299663 Jy
! Component: 150  -  total flux cleaned = -0.00288171 Jy
! Component: 200  -  total flux cleaned = -0.00299032 Jy
! Total flux subtracted in 200 components = -0.00299032 Jy
! Clean residual min=-0.004255 max=0.003995 Jy/beam
! Clean residual mean=0.000078 rms=0.001118 Jy/beam
! Combined flux in latest and established models = 3.2499 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 127 components and 3.2499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.341888Jy  sigma=0.000719
! Fit after  self-cal, rms=0.341893Jy  sigma=0.000719
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243858 Jy
! Component: 100  -  total flux cleaned = 6.34609e-05 Jy
! Component: 150  -  total flux cleaned = -0.000106229 Jy
! Component: 200  -  total flux cleaned = -0.000264378 Jy
! Total flux subtracted in 200 components = -0.000264378 Jy
! Clean residual min=-0.004158 max=0.004004 Jy/beam
! Clean residual mean=0.000078 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 3.24964 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 137 components and 3.24964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.341846Jy  sigma=0.000718
! Fit after  self-cal, rms=0.341846Jy  sigma=0.000718
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=1.005 mas, bmaj=1.584 mas, bpa=-4.449 degrees
! Estimated noise=653.896 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.005 x 1.584 at -4.449 degrees (North through East)
! Clean map  min=-0.0063035  max=2.2602 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.341846Jy  sigma=0.000718
! Fit after  self-cal, rms=0.348653Jy  sigma=0.000657
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=1.005 mas, bmaj=1.584 mas, bpa=-4.462 degrees
! Estimated noise=653.355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00436397 Jy
! Component: 100  -  total flux cleaned = -0.00551879 Jy
! Component: 150  -  total flux cleaned = -0.00569194 Jy
! Component: 200  -  total flux cleaned = -0.00585811 Jy
! Total flux subtracted in 200 components = -0.00585811 Jy
! Clean residual min=-0.004069 max=0.004523 Jy/beam
! Clean residual mean=0.000034 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 3.24378 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 145 components and 3.24378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.348404Jy  sigma=0.000650
! Fit after  self-cal, rms=0.348399Jy  sigma=0.000650
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.65318e-05 Jy
! Component: 100  -  total flux cleaned = 0.000118752 Jy
! Component: 150  -  total flux cleaned = 0.000258532 Jy
! Component: 200  -  total flux cleaned = 0.000661803 Jy
! Total flux subtracted in 200 components = 0.000661803 Jy
! Clean residual min=-0.003953 max=0.004316 Jy/beam
! Clean residual mean=0.000036 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 3.24444 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 150 components and 3.24444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.348228Jy  sigma=0.000647
! Fit after  self-cal, rms=0.348226Jy  sigma=0.000647
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.348226Jy  sigma=0.000647
! Fit after  self-cal, rms=0.350984Jy  sigma=0.000646
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=0.8055 mas, bmaj=1.286 mas, bpa=-6.7 degrees
! Estimated noise=1019.73 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.68326 Jy
! Component: 100  -  total flux cleaned = 2.35176 Jy
! Component: 150  -  total flux cleaned = 2.68385 Jy
! Component: 200  -  total flux cleaned = 2.86473 Jy
! Total flux subtracted in 200 components = 2.86473 Jy
! Clean residual min=-0.024442 max=0.090300 Jy/beam
! Clean residual mean=0.000074 rms=0.007571 Jy/beam
! Combined flux in latest and established models = 2.86473 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 2.86473 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=1.005 mas, bmaj=1.585 mas, bpa=-4.545 degrees
! Estimated noise=653.65 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.148963 Jy
! Component: 100  -  total flux cleaned = 0.22413 Jy
! Component: 150  -  total flux cleaned = 0.268797 Jy
! Component: 200  -  total flux cleaned = 0.298808 Jy
! Total flux subtracted in 200 components = 0.298808 Jy
! Clean residual min=-0.009003 max=0.016617 Jy/beam
! Clean residual mean=-0.000052 rms=0.002309 Jy/beam
! Combined flux in latest and established models = 3.16354 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 45 components and 3.16354 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Added new window around map position (-0.4, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0208914 Jy
! Component: 100  -  total flux cleaned = 0.0360348 Jy
! Component: 150  -  total flux cleaned = 0.0473499 Jy
! Component: 200  -  total flux cleaned = 0.0548863 Jy
! Total flux subtracted in 200 components = 0.0548863 Jy
! Clean residual min=-0.005865 max=0.005629 Jy/beam
! Clean residual mean=0.000008 rms=0.001306 Jy/beam
! Combined flux in latest and established models = 3.21842 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 67 components and 3.21842 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=2.336 mas, bmaj=2.605 mas, bpa=-6.801 degrees
! Estimated noise=776.355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00875975 Jy
! Component: 100  -  total flux cleaned = 0.0144026 Jy
! Component: 150  -  total flux cleaned = 0.0182594 Jy
! Component: 200  -  total flux cleaned = 0.019741 Jy
! Total flux subtracted in 200 components = 0.019741 Jy
! Clean residual min=-0.004092 max=0.004031 Jy/beam
! Clean residual mean=0.000067 rms=0.000992 Jy/beam
! Combined flux in latest and established models = 3.23816 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000718741 Jy
! Component: 100  -  total flux cleaned = 0.00124041 Jy
! Component: 150  -  total flux cleaned = 0.00161604 Jy
! Component: 200  -  total flux cleaned = 0.00188211 Jy
! Total flux subtracted in 200 components = 0.00188211 Jy
! Clean residual min=-0.003831 max=0.004029 Jy/beam
! Clean residual mean=0.000072 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 3.24005 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 119 components and 3.24005 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Added new window around map position (-9, -18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00303093 Jy
! Component: 100  -  total flux cleaned = 0.00325424 Jy
! Component: 150  -  total flux cleaned = 0.00396595 Jy
! Component: 200  -  total flux cleaned = 0.00431124 Jy
! Total flux subtracted in 200 components = 0.00431124 Jy
! Clean residual min=-0.003621 max=0.002972 Jy/beam
! Clean residual mean=0.000058 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 3.24436 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 149 components and 3.24436 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! Estimated beam: bmin=1.005 mas, bmaj=1.585 mas, bpa=-4.545 degrees
! Estimated noise=653.65 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00344865 Jy
! Component: 100  -  total flux cleaned = -0.00323186 Jy
! Component: 150  -  total flux cleaned = -0.00282283 Jy
! Component: 200  -  total flux cleaned = -0.00243232 Jy
! Total flux subtracted in 200 components = -0.00243232 Jy
! Clean residual min=-0.005261 max=0.004189 Jy/beam
! Clean residual mean=0.000029 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 3.24192 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 157 components and 3.24192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.350892Jy  sigma=0.000659
! Fit after  self-cal, rms=0.350648Jy  sigma=0.000657
wmodel J0555+3948_X_2017_05_01_pus_map.mod
! Writing 157 model components to file: J0555+3948_X_2017_05_01_pus_map.mod
wobs J0555+3948_X_2017_05_01_pus_uvs.fits
! Writing UV FITS file: J0555+3948_X_2017_05_01_pus_uvs.fits
wwins J0555+3948_X_2017_05_01_pus_map.win
! wwins: Wrote 7 windows to J0555+3948_X_2017_05_01_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000664964 Jy
! Component: 100  -  total flux cleaned = 4.98792e-05 Jy
! Component: 150  -  total flux cleaned = 0.000509101 Jy
! Component: 200  -  total flux cleaned = 0.000657237 Jy
! Component: 250  -  total flux cleaned = 0.000801165 Jy
! Component: 300  -  total flux cleaned = 0.000658993 Jy
! Component: 350  -  total flux cleaned = 0.000452414 Jy
! Component: 400  -  total flux cleaned = 0.000384754 Jy
! Component: 450  -  total flux cleaned = 0.00038445 Jy
! Component: 500  -  total flux cleaned = 0.000384571 Jy
! Component: 550  -  total flux cleaned = 0.000384299 Jy
! Component: 600  -  total flux cleaned = 0.00038489 Jy
! Component: 650  -  total flux cleaned = 0.000510095 Jy
! Component: 700  -  total flux cleaned = 0.00063254 Jy
! Component: 750  -  total flux cleaned = 0.000692355 Jy
! Component: 800  -  total flux cleaned = 0.000571972 Jy
! Component: 850  -  total flux cleaned = 0.000750108 Jy
! Component: 900  -  total flux cleaned = 0.00080877 Jy
! Component: 950  -  total flux cleaned = 0.000751112 Jy
! Component: 1000  -  total flux cleaned = 0.00080847 Jy
! Component: 1050  -  total flux cleaned = 0.000865954 Jy
! Component: 1100  -  total flux cleaned = 0.000865316 Jy
! Component: 1150  -  total flux cleaned = 0.000809999 Jy
! Component: 1200  -  total flux cleaned = 0.000920556 Jy
! Component: 1250  -  total flux cleaned = 0.000975332 Jy
! Component: 1300  -  total flux cleaned = 0.00081217 Jy
! Component: 1350  -  total flux cleaned = 0.00102811 Jy
! Component: 1400  -  total flux cleaned = 0.000974408 Jy
! Component: 1450  -  total flux cleaned = 0.00108056 Jy
! Component: 1500  -  total flux cleaned = 0.00102781 Jy
! Component: 1550  -  total flux cleaned = 0.00107931 Jy
! Component: 1600  -  total flux cleaned = 0.0011827 Jy
! Component: 1650  -  total flux cleaned = 0.00118276 Jy
! Component: 1700  -  total flux cleaned = 0.00123394 Jy
! Component: 1750  -  total flux cleaned = 0.00113262 Jy
! Component: 1800  -  total flux cleaned = 0.00133381 Jy
! Component: 1850  -  total flux cleaned = 0.0012344 Jy
! Component: 1900  -  total flux cleaned = 0.00138257 Jy
! Component: 1950  -  total flux cleaned = 0.00133366 Jy
! Component: 2000  -  total flux cleaned = 0.00143143 Jy
! Total flux subtracted in 2048 components = 0.0013838 Jy
! Clean residual min=-0.002575 max=0.002410 Jy/beam
! Clean residual mean=0.000019 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 3.24331 Jy
keep
! Adding 137 model components to the UV plane model.
! The established model now contains 285 components and 3.24331 Jy
![Exited script file: muppet]
wmap "J0555+3948_X_2017_05_01_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.005 x 1.585 at -4.545 degrees (North through East)
! Clean map  min=-0.0044169  max=2.2713 Jy/beam
! Writing clean map to FITS file: J0555+3948_X_2017_05_01_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.27129 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.0787% of the data.
!  The x-axis pixel size should ideally be below 0.1988 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000820629 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.108392 0.108392 0.216783 0.433567 0.867134 1.73427 3.46853 6.93707 13.8741 27.7483 55.4965
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0024 
print "peak=",int(1000*peak_flux)/1000
! peak= 2.271 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.005 x 1.585 at -4.545 degrees (North through East)
! Clean map  min=-0.0044169  max=2.2713 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0555+3948_X_2017_05_01_pus_uvs.log closed on Wed May  1 19:52:52 2019