! Started logfile: J0555+3948_X_2017_03_27_pus_uvs.log on Sat Apr 27 21:59:14 2019 obs J0555+3948_X_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0555+3948_X_2017_03_27_pus_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.805556 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1844 lines of history. ! ! Reading 17400 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0555+3948_X_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.616011Jy sigma=0.013847 ! Fit after self-cal, rms=1.613128Jy sigma=0.013824 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.758 mas, bmaj=1.227 mas, bpa=-0.8663 degrees ! Estimated noise=996.132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.62913 Jy ! Component: 100 - total flux cleaned = 2.28158 Jy ! Total flux subtracted in 100 components = 2.28158 Jy ! Clean residual min=-0.068049 max=0.304125 Jy/beam ! Clean residual mean=0.000177 rms=0.022540 Jy/beam ! Combined flux in latest and established models = 2.28158 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 2.28158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.653859Jy sigma=0.005647 ! Fit after self-cal, rms=0.648118Jy sigma=0.005600 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.34475 Jy ! Component: 100 - total flux cleaned = 0.539741 Jy ! Total flux subtracted in 100 components = 0.539741 Jy ! Clean residual min=-0.036163 max=0.116871 Jy/beam ! Clean residual mean=0.000071 rms=0.010628 Jy/beam ! Combined flux in latest and established models = 2.82132 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 2.82132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.319134Jy sigma=0.002736 ! Fit after self-cal, rms=0.318111Jy sigma=0.002728 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Added new window around map position (-1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129001 Jy ! Component: 100 - total flux cleaned = 0.21196 Jy ! Total flux subtracted in 100 components = 0.21196 Jy ! Clean residual min=-0.030565 max=0.045152 Jy/beam ! Clean residual mean=0.000037 rms=0.007262 Jy/beam ! Combined flux in latest and established models = 3.03328 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 3.03328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.238919Jy sigma=0.002002 ! Fit after self-cal, rms=0.237806Jy sigma=0.001993 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0594201 Jy ! Component: 100 - total flux cleaned = 0.100321 Jy ! Total flux subtracted in 100 components = 0.100321 Jy ! Clean residual min=-0.029342 max=0.025502 Jy/beam ! Clean residual mean=0.000022 rms=0.006184 Jy/beam ! Combined flux in latest and established models = 3.1336 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 3.1336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.219702Jy sigma=0.001813 ! Fit after self-cal, rms=0.219453Jy sigma=0.001811 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.9514 mas, bmaj=1.535 mas, bpa=0.09725 degrees ! Estimated noise=638.784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165097 Jy ! Component: 100 - total flux cleaned = 0.0229433 Jy ! Component: 150 - total flux cleaned = 0.025074 Jy ! Component: 200 - total flux cleaned = 0.0262137 Jy ! Total flux subtracted in 200 components = 0.0262137 Jy ! Clean residual min=-0.037476 max=0.028561 Jy/beam ! Clean residual mean=0.000433 rms=0.006214 Jy/beam ! Combined flux in latest and established models = 3.15981 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 3.15981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.213974Jy sigma=0.001749 ! Fit after self-cal, rms=0.213737Jy sigma=0.001748 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.01 KP 1.00 ! LA 0.99 MK 0.98 NL 0.96 OV 0.98 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.97 KP 1.02 ! LA 0.99 MK 0.98 NL 0.96 OV 0.98 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.98 KP 0.96 ! LA 1.02 MK 1.00 NL 0.96 OV 0.98 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.02 KP 0.99 ! LA 1.02 MK 1.01 NL 0.96 OV 0.98 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.99 KP 1.00 ! LA 1.01 MK 1.02 NL 0.95 OV 0.98 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.02 KP 0.99 ! LA 1.02 MK 1.01 NL 0.96 OV 0.99 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.00 KP 0.99 ! LA 1.04 MK 1.02 NL 0.96 OV 1.00 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.00 KP 1.00 ! LA 1.00 MK 1.01 NL 0.97 OV 0.99 ! PT 1.02 SC 1.08 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.01 KP 1.00 ! LA 1.03 MK 0.99 NL 0.96 OV 0.99 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.06 KP 0.90 ! LA 1.03 MK 1.00 NL 0.86 OV 1.07 ! PT 1.09 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 1.10 KP 1.01 ! LA 1.10 MK 1.05 NL 0.92 OV 1.14 ! PT 1.18 SC 1.10 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.05 KP 1.02 ! LA 1.05 MK 0.98 NL 0.89 OV 1.11 ! PT 1.13 SC 1.07 ! ! ! Fit before self-cal, rms=0.213737Jy sigma=0.001748 ! Fit after self-cal, rms=0.123769Jy sigma=0.000943 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.9615 mas, bmaj=1.54 mas, bpa=-0.6217 degrees ! Estimated noise=640.987 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117284 Jy ! Component: 100 - total flux cleaned = 0.00276898 Jy ! Component: 150 - total flux cleaned = 0.00442636 Jy ! Component: 200 - total flux cleaned = 0.00528762 Jy ! Total flux subtracted in 200 components = 0.00528762 Jy ! Clean residual min=-0.015549 max=0.013058 Jy/beam ! Clean residual mean=0.000140 rms=0.003380 Jy/beam ! Combined flux in latest and established models = 3.1651 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 3.1651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121388Jy sigma=0.000925 ! Fit after self-cal, rms=0.121241Jy sigma=0.000923 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121241Jy sigma=0.000923 ! Fit after self-cal, rms=0.092558Jy sigma=0.000726 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.9578 mas, bmaj=1.545 mas, bpa=-0.4282 degrees ! Estimated noise=640.084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00932362 Jy ! Component: 100 - total flux cleaned = 0.0102756 Jy ! Component: 150 - total flux cleaned = 0.0106593 Jy ! Component: 200 - total flux cleaned = 0.0106574 Jy ! Total flux subtracted in 200 components = 0.0106574 Jy ! Clean residual min=-0.005789 max=0.007326 Jy/beam ! Clean residual mean=0.000003 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 3.17576 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 3.17576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091226Jy sigma=0.000715 ! Fit after self-cal, rms=0.091068Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582614 Jy ! Component: 100 - total flux cleaned = 0.00718765 Jy ! Component: 150 - total flux cleaned = 0.00753918 Jy ! Component: 200 - total flux cleaned = 0.00754297 Jy ! Total flux subtracted in 200 components = 0.00754297 Jy ! Clean residual min=-0.005850 max=0.006551 Jy/beam ! Clean residual mean=0.000009 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 3.1833 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 3.1833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090205Jy sigma=0.000706 ! Fit after self-cal, rms=0.090167Jy sigma=0.000705 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090167Jy sigma=0.000705 ! Fit after self-cal, rms=0.088830Jy sigma=0.000696 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.956 mas, bmaj=1.544 mas, bpa=-0.4224 degrees ! Estimated noise=639.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648421 Jy ! Component: 100 - total flux cleaned = 0.00805779 Jy ! Component: 150 - total flux cleaned = 0.00835506 Jy ! Component: 200 - total flux cleaned = 0.00821079 Jy ! Total flux subtracted in 200 components = 0.00821079 Jy ! Clean residual min=-0.004861 max=0.005855 Jy/beam ! Clean residual mean=0.000007 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 3.19151 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 3.19151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088124Jy sigma=0.000690 ! Fit after self-cal, rms=0.088052Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450305 Jy ! Component: 100 - total flux cleaned = 0.00482092 Jy ! Component: 150 - total flux cleaned = 0.00496358 Jy ! Component: 200 - total flux cleaned = 0.00509897 Jy ! Total flux subtracted in 200 components = 0.00509897 Jy ! Clean residual min=-0.004725 max=0.004143 Jy/beam ! Clean residual mean=0.000010 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 3.19661 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 3.19661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087504Jy sigma=0.000685 ! Fit after self-cal, rms=0.087479Jy sigma=0.000684 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087479Jy sigma=0.000684 ! Fit after self-cal, rms=0.087344Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=2.246 mas, bmaj=2.577 mas, bpa=5.419 degrees ! Estimated noise=821.281 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031535 Jy ! Component: 100 - total flux cleaned = 0.00284793 Jy ! Component: 150 - total flux cleaned = 0.00270349 Jy ! Component: 200 - total flux cleaned = 0.00275026 Jy ! Total flux subtracted in 200 components = 0.00275026 Jy ! Clean residual min=-0.003781 max=0.003763 Jy/beam ! Clean residual mean=0.000014 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 3.19936 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 3.19936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087212Jy sigma=0.000683 ! Fit after self-cal, rms=0.087184Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426972 Jy ! Component: 100 - total flux cleaned = 0.000237672 Jy ! Component: 150 - total flux cleaned = 0.000234605 Jy ! Component: 200 - total flux cleaned = 0.000190631 Jy ! Total flux subtracted in 200 components = 0.000190631 Jy ! Clean residual min=-0.003761 max=0.003767 Jy/beam ! Clean residual mean=0.000013 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 3.19955 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 97 components and 3.19955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087162Jy sigma=0.000682 ! Fit after self-cal, rms=0.087143Jy sigma=0.000682 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.9551 mas, bmaj=1.543 mas, bpa=-0.4499 degrees ! Estimated noise=639.511 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9551 x 1.543 at -0.4499 degrees (North through East) ! Clean map min=-0.0034982 max=2.2366 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087143Jy sigma=0.000682 ! Fit after self-cal, rms=0.081791Jy sigma=0.000637 ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.9549 mas, bmaj=1.544 mas, bpa=-0.4547 degrees ! Estimated noise=639.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331379 Jy ! Component: 100 - total flux cleaned = 0.00330856 Jy ! Component: 150 - total flux cleaned = 0.00344273 Jy ! Component: 200 - total flux cleaned = 0.0036832 Jy ! Total flux subtracted in 200 components = 0.0036832 Jy ! Clean residual min=-0.003419 max=0.003734 Jy/beam ! Clean residual mean=-0.000004 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 3.20324 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 100 components and 3.20324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081340Jy sigma=0.000633 ! Fit after self-cal, rms=0.081306Jy sigma=0.000633 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Added new window around map position (-12.8, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332484 Jy ! Component: 100 - total flux cleaned = 0.00381466 Jy ! Component: 150 - total flux cleaned = 0.00426937 Jy ! Component: 200 - total flux cleaned = 0.00448342 Jy ! Total flux subtracted in 200 components = 0.00448342 Jy ! Clean residual min=-0.003356 max=0.003383 Jy/beam ! Clean residual mean=-0.000002 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 3.20772 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 108 components and 3.20772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080976Jy sigma=0.000630 ! Fit after self-cal, rms=0.080958Jy sigma=0.000630 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080958Jy sigma=0.000630 ! Fit after self-cal, rms=0.080916Jy sigma=0.000629 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.7601 mas, bmaj=1.235 mas, bpa=-1.588 degrees ! Estimated noise=1000.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.63666 Jy ! Component: 100 - total flux cleaned = 2.29738 Jy ! Component: 150 - total flux cleaned = 2.63479 Jy ! Component: 200 - total flux cleaned = 2.82992 Jy ! Total flux subtracted in 200 components = 2.82992 Jy ! Clean residual min=-0.026481 max=0.100769 Jy/beam ! Clean residual mean=0.000058 rms=0.008341 Jy/beam ! Combined flux in latest and established models = 2.82992 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 2.82992 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.9543 mas, bmaj=1.544 mas, bpa=-0.4847 degrees ! Estimated noise=639.619 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170661 Jy ! Component: 100 - total flux cleaned = 0.25765 Jy ! Component: 150 - total flux cleaned = 0.306036 Jy ! Component: 200 - total flux cleaned = 0.334881 Jy ! Total flux subtracted in 200 components = 0.334881 Jy ! Clean residual min=-0.007561 max=0.014776 Jy/beam ! Clean residual mean=-0.000029 rms=0.001835 Jy/beam ! Combined flux in latest and established models = 3.1648 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 42 components and 3.1648 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177027 Jy ! Component: 100 - total flux cleaned = 0.0262474 Jy ! Component: 150 - total flux cleaned = 0.0297683 Jy ! Component: 200 - total flux cleaned = 0.0325468 Jy ! Total flux subtracted in 200 components = 0.0325468 Jy ! Clean residual min=-0.005462 max=0.006807 Jy/beam ! Clean residual mean=-0.000007 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 3.19735 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 3.19735 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Added new window around map position (-0.6, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334788 Jy ! Component: 100 - total flux cleaned = 0.00507329 Jy ! Component: 150 - total flux cleaned = 0.00668194 Jy ! Component: 200 - total flux cleaned = 0.00842632 Jy ! Total flux subtracted in 200 components = 0.00842632 Jy ! Clean residual min=-0.004732 max=0.004657 Jy/beam ! Clean residual mean=-0.000000 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 3.20578 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 3.20578 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=2.244 mas, bmaj=2.576 mas, bpa=5.337 degrees ! Estimated noise=822.104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000977962 Jy ! Component: 100 - total flux cleaned = 0.00135587 Jy ! Component: 150 - total flux cleaned = 0.00186258 Jy ! Component: 200 - total flux cleaned = 0.00229661 Jy ! Total flux subtracted in 200 components = 0.00229661 Jy ! Clean residual min=-0.003270 max=0.003041 Jy/beam ! Clean residual mean=-0.000004 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 3.20807 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000534023 Jy ! Component: 100 - total flux cleaned = 0.000868168 Jy ! Component: 150 - total flux cleaned = 0.0011011 Jy ! Component: 200 - total flux cleaned = 0.00120501 Jy ! Total flux subtracted in 200 components = 0.00120501 Jy ! Clean residual min=-0.003181 max=0.002898 Jy/beam ! Clean residual mean=-0.000006 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 3.20928 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 3.20928 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.9543 mas, bmaj=1.544 mas, bpa=-0.4847 degrees ! Estimated noise=639.619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00048177 Jy ! Component: 100 - total flux cleaned = 0.000367197 Jy ! Component: 150 - total flux cleaned = 0.000758806 Jy ! Component: 200 - total flux cleaned = 0.00131414 Jy ! Total flux subtracted in 200 components = 0.00131414 Jy ! Clean residual min=-0.004712 max=0.004289 Jy/beam ! Clean residual mean=-0.000002 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 3.21059 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 3.21059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083748Jy sigma=0.000651 ! Fit after self-cal, rms=0.083629Jy sigma=0.000650 wmodel J0555+3948_X_2017_03_27_pus_map.mod ! Writing 88 model components to file: J0555+3948_X_2017_03_27_pus_map.mod wobs J0555+3948_X_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0555+3948_X_2017_03_27_pus_uvs.fits wwins J0555+3948_X_2017_03_27_pus_map.win ! wwins: Wrote 6 windows to J0555+3948_X_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000682146 Jy ! Component: 100 - total flux cleaned = -0.000840961 Jy ! Component: 150 - total flux cleaned = -0.00076506 Jy ! Component: 200 - total flux cleaned = -0.000473656 Jy ! Component: 250 - total flux cleaned = -0.000260318 Jy ! Component: 300 - total flux cleaned = 1.81255e-05 Jy ! Component: 350 - total flux cleaned = 0.00029007 Jy ! Component: 400 - total flux cleaned = 0.000556134 Jy ! Component: 450 - total flux cleaned = 0.00075154 Jy ! Component: 500 - total flux cleaned = 0.000879155 Jy ! Component: 550 - total flux cleaned = 0.00106853 Jy ! Component: 600 - total flux cleaned = 0.00113021 Jy ! Component: 650 - total flux cleaned = 0.00137559 Jy ! Component: 700 - total flux cleaned = 0.00179828 Jy ! Component: 750 - total flux cleaned = 0.00185731 Jy ! Component: 800 - total flux cleaned = 0.0022711 Jy ! Component: 850 - total flux cleaned = 0.00244529 Jy ! Component: 900 - total flux cleaned = 0.0025614 Jy ! Component: 950 - total flux cleaned = 0.00290362 Jy ! Component: 1000 - total flux cleaned = 0.00301681 Jy ! Component: 1050 - total flux cleaned = 0.00329718 Jy ! Component: 1100 - total flux cleaned = 0.00357389 Jy ! Component: 1150 - total flux cleaned = 0.00368358 Jy ! Component: 1200 - total flux cleaned = 0.0039013 Jy ! Component: 1250 - total flux cleaned = 0.00427694 Jy ! Component: 1300 - total flux cleaned = 0.00432956 Jy ! Component: 1350 - total flux cleaned = 0.00454097 Jy ! Component: 1400 - total flux cleaned = 0.00469777 Jy ! Component: 1450 - total flux cleaned = 0.00506104 Jy ! Component: 1500 - total flux cleaned = 0.00511245 Jy ! Component: 1550 - total flux cleaned = 0.00536788 Jy ! Component: 1600 - total flux cleaned = 0.00557049 Jy ! Component: 1650 - total flux cleaned = 0.00577159 Jy ! Component: 1700 - total flux cleaned = 0.0059705 Jy ! Component: 1750 - total flux cleaned = 0.00611877 Jy ! Component: 1800 - total flux cleaned = 0.00616762 Jy ! Component: 1850 - total flux cleaned = 0.00646023 Jy ! Component: 1900 - total flux cleaned = 0.00660531 Jy ! Component: 1950 - total flux cleaned = 0.00670142 Jy ! Component: 2000 - total flux cleaned = 0.00670145 Jy ! Total flux subtracted in 2048 components = 0.00689144 Jy ! Clean residual min=-0.002356 max=0.002356 Jy/beam ! Clean residual mean=0.000001 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 3.21748 Jy keep ! Adding 115 model components to the UV plane model. ! The established model now contains 193 components and 3.21748 Jy ![Exited script file: muppet] wmap "J0555+3948_X_2017_03_27_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9543 x 1.544 at -0.4847 degrees (North through East) ! Clean map min=-0.0029439 max=2.2361 Jy/beam ! Writing clean map to FITS file: J0555+3948_X_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.23612 invert ! Inverting map ! Your choice of large map pixels excluded 0.0402% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000782827 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.105025 0.105025 0.21005 0.420099 0.840199 1.6804 3.3608 6.72159 13.4432 26.8864 53.7727 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.236 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9543 x 1.544 at -0.4847 degrees (North through East) ! Clean map min=-0.0029439 max=2.2361 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0555+3948_X_2017_03_27_pus_uvs.log closed on Sat Apr 27 21:59:16 2019