! Started logfile: J0555+3948_X_2017_03_23_pus_uvs.log on Mon May 13 10:19:06 2019
obs J0555+3948_X_2017_03_23_pus_uva.fits
! Reading UV FITS file: J0555+3948_X_2017_03_23_pus_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.659574 visibilities/baseline/integration-bin.
! Found source: J0555+3948
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 1124 lines of history.
! 
! Reading 16740 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0555+3948_X_2017_03_23_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.503766Jy  sigma=0.013451
! Fit after  self-cal, rms=1.497570Jy  sigma=0.013410
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.7962 mas, bmaj=1.288 mas, bpa=-6.053 degrees
! Estimated noise=989.629 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.64528 Jy
! Component: 100  -  total flux cleaned = 2.28543 Jy
! Total flux subtracted in 100 components = 2.28543 Jy
! Clean residual min=-0.060731 max=0.291542 Jy/beam
! Clean residual mean=-0.000225 rms=0.022267 Jy/beam
! Combined flux in latest and established models = 2.28543 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 2.28543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.546677Jy  sigma=0.004926
! Fit after  self-cal, rms=0.540664Jy  sigma=0.004886
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.325614 Jy
! Component: 100  -  total flux cleaned = 0.499393 Jy
! Total flux subtracted in 100 components = 0.499393 Jy
! Clean residual min=-0.033943 max=0.100286 Jy/beam
! Clean residual mean=-0.000000 rms=0.009368 Jy/beam
! Combined flux in latest and established models = 2.78483 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 2.78483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.244696Jy  sigma=0.002144
! Fit after  self-cal, rms=0.243516Jy  sigma=0.002137
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (-1, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10983 Jy
! Component: 100  -  total flux cleaned = 0.177078 Jy
! Total flux subtracted in 100 components = 0.177078 Jy
! Clean residual min=-0.026532 max=0.035697 Jy/beam
! Clean residual mean=0.000087 rms=0.006194 Jy/beam
! Combined flux in latest and established models = 2.96191 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 24 components and 2.96191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.186409Jy  sigma=0.001550
! Fit after  self-cal, rms=0.185308Jy  sigma=0.001541
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0461407 Jy
! Component: 100  -  total flux cleaned = 0.0711471 Jy
! Total flux subtracted in 100 components = 0.0711471 Jy
! Clean residual min=-0.023846 max=0.021875 Jy/beam
! Clean residual mean=0.000123 rms=0.005334 Jy/beam
! Combined flux in latest and established models = 3.03305 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 30 components and 3.03305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.176561Jy  sigma=0.001430
! Fit after  self-cal, rms=0.176347Jy  sigma=0.001429
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.9889 mas, bmaj=1.548 mas, bpa=-4.208 degrees
! Estimated noise=654.414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111356 Jy
! Component: 100  -  total flux cleaned = 0.00279627 Jy
! Component: 150  -  total flux cleaned = 0.00365544 Jy
! Component: 200  -  total flux cleaned = 0.00364385 Jy
! Total flux subtracted in 200 components = 0.00364385 Jy
! Clean residual min=-0.028166 max=0.023856 Jy/beam
! Clean residual mean=0.000262 rms=0.006190 Jy/beam
! Combined flux in latest and established models = 3.0367 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 37 components and 3.0367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.173585Jy  sigma=0.001398
! Fit after  self-cal, rms=0.173380Jy  sigma=0.001397
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.99     KP        1.00     
!   LA        0.98     MK        0.98     NL        0.97     OV        0.98     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.98     MK        0.98     NL        0.97     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.97     KP        0.99     
!   LA        1.01     MK        0.99     NL        0.98     OV        0.98     
!   PT        1.07     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.00     KP        0.98     
!   LA        1.01     MK        1.00     NL        0.97     OV        1.02     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.96     KP        0.99     
!   LA        1.01     MK        1.02     NL        0.98     OV        0.99     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        0.98     KP        0.99     
!   LA        1.01     MK        1.01     NL        0.98     OV        0.98     
!   PT        1.03     SC        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        1.00     
!   LA        1.02     MK        1.02     NL        0.99     OV        0.99     
!   PT        1.03     SC        1.07     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.99     KP        0.99     
!   LA        1.00     MK        1.00     NL        0.98     OV        1.00     
!   PT        1.04     SC        1.07     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        1.00     
!   LA        1.02     MK        0.99     NL        0.99     OV        0.99     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.03     KP        1.01     
!   LA        1.04     MK        1.01     NL        0.98     OV        0.99     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.99     
!   LA        1.04     MK        0.99     NL        0.99     OV        1.00     
!   PT        1.06     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.02     
!   LA        1.02     MK        0.99     NL        1.00     OV        1.00     
!   PT        1.05     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.173380Jy  sigma=0.001397
! Fit after  self-cal, rms=0.149274Jy  sigma=0.001187
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.9931 mas, bmaj=1.552 mas, bpa=-4.779 degrees
! Estimated noise=656.056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00531012 Jy
! Component: 100  -  total flux cleaned = 0.00736817 Jy
! Component: 150  -  total flux cleaned = 0.00857561 Jy
! Component: 200  -  total flux cleaned = 0.00937805 Jy
! Total flux subtracted in 200 components = 0.00937805 Jy
! Clean residual min=-0.021216 max=0.021754 Jy/beam
! Clean residual mean=-0.000012 rms=0.005249 Jy/beam
! Combined flux in latest and established models = 3.04607 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 42 components and 3.04607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.148045Jy  sigma=0.001176
! Fit after  self-cal, rms=0.148013Jy  sigma=0.001175
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.148013Jy  sigma=0.001175
! Fit after  self-cal, rms=0.110131Jy  sigma=0.000802
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.9892 mas, bmaj=1.556 mas, bpa=-4.567 degrees
! Estimated noise=655.285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0095688 Jy
! Component: 100  -  total flux cleaned = 0.0114306 Jy
! Component: 150  -  total flux cleaned = 0.0125318 Jy
! Component: 200  -  total flux cleaned = 0.013115 Jy
! Total flux subtracted in 200 components = 0.013115 Jy
! Clean residual min=-0.009468 max=0.009116 Jy/beam
! Clean residual mean=0.000011 rms=0.002109 Jy/beam
! Combined flux in latest and established models = 3.05919 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 47 components and 3.05919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.108547Jy  sigma=0.000790
! Fit after  self-cal, rms=0.108407Jy  sigma=0.000789
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296771 Jy
! Component: 100  -  total flux cleaned = 0.0033296 Jy
! Component: 150  -  total flux cleaned = 0.00332693 Jy
! Component: 200  -  total flux cleaned = 0.00362477 Jy
! Total flux subtracted in 200 components = 0.00362477 Jy
! Clean residual min=-0.009044 max=0.008432 Jy/beam
! Clean residual mean=0.000017 rms=0.002073 Jy/beam
! Combined flux in latest and established models = 3.06281 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 50 components and 3.06281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107785Jy  sigma=0.000784
! Fit after  self-cal, rms=0.107725Jy  sigma=0.000784
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107725Jy  sigma=0.000784
! Fit after  self-cal, rms=0.098062Jy  sigma=0.000711
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.9885 mas, bmaj=1.556 mas, bpa=-4.823 degrees
! Estimated noise=655.286 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00667145 Jy
! Component: 100  -  total flux cleaned = 0.00800756 Jy
! Component: 150  -  total flux cleaned = 0.00866499 Jy
! Component: 200  -  total flux cleaned = 0.00910746 Jy
! Total flux subtracted in 200 components = 0.00910746 Jy
! Clean residual min=-0.005031 max=0.007107 Jy/beam
! Clean residual mean=-0.000014 rms=0.001247 Jy/beam
! Combined flux in latest and established models = 3.07192 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 3.07192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097232Jy  sigma=0.000704
! Fit after  self-cal, rms=0.097174Jy  sigma=0.000704
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00386096 Jy
! Component: 100  -  total flux cleaned = 0.00386176 Jy
! Component: 150  -  total flux cleaned = 0.00402802 Jy
! Component: 200  -  total flux cleaned = 0.00402587 Jy
! Total flux subtracted in 200 components = 0.00402587 Jy
! Clean residual min=-0.004932 max=0.005265 Jy/beam
! Clean residual mean=-0.000010 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 3.07595 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 68 components and 3.07595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096449Jy  sigma=0.000698
! Fit after  self-cal, rms=0.096422Jy  sigma=0.000697
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096422Jy  sigma=0.000697
! Fit after  self-cal, rms=0.096378Jy  sigma=0.000696
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=2.241 mas, bmaj=2.562 mas, bpa=1.341 degrees
! Estimated noise=812.114 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00517149 Jy
! Component: 100  -  total flux cleaned = 0.005431 Jy
! Component: 150  -  total flux cleaned = 0.00557179 Jy
! Component: 200  -  total flux cleaned = 0.00569667 Jy
! Total flux subtracted in 200 components = 0.00569667 Jy
! Clean residual min=-0.004115 max=0.003559 Jy/beam
! Clean residual mean=-0.000031 rms=0.001022 Jy/beam
! Combined flux in latest and established models = 3.08164 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 80 components and 3.08164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096310Jy  sigma=0.000695
! Fit after  self-cal, rms=0.096270Jy  sigma=0.000695
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000672981 Jy
! Component: 100  -  total flux cleaned = 0.000597987 Jy
! Component: 150  -  total flux cleaned = 0.000820373 Jy
! Component: 200  -  total flux cleaned = 0.000867486 Jy
! Total flux subtracted in 200 components = 0.000867486 Jy
! Clean residual min=-0.004012 max=0.003402 Jy/beam
! Clean residual mean=-0.000028 rms=0.001001 Jy/beam
! Combined flux in latest and established models = 3.08251 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 88 components and 3.08251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096226Jy  sigma=0.000694
! Fit after  self-cal, rms=0.096195Jy  sigma=0.000694
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.9875 mas, bmaj=1.555 mas, bpa=-4.926 degrees
! Estimated noise=655.207 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9875 x 1.555 at -4.926 degrees (North through East)
! Clean map  min=-0.0036973  max=2.1978 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096195Jy  sigma=0.000694
! Fit after  self-cal, rms=0.090818Jy  sigma=0.000645
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.9872 mas, bmaj=1.556 mas, bpa=-4.969 degrees
! Estimated noise=655.358 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255242 Jy
! Component: 100  -  total flux cleaned = 0.00209363 Jy
! Component: 150  -  total flux cleaned = 0.0015259 Jy
! Component: 200  -  total flux cleaned = 0.00112074 Jy
! Total flux subtracted in 200 components = 0.00112074 Jy
! Clean residual min=-0.004179 max=0.004726 Jy/beam
! Clean residual mean=-0.000024 rms=0.001031 Jy/beam
! Combined flux in latest and established models = 3.08363 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 91 components and 3.08363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090284Jy  sigma=0.000641
! Fit after  self-cal, rms=0.090245Jy  sigma=0.000641
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (-2.2, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00395411 Jy
! Component: 100  -  total flux cleaned = 0.00413827 Jy
! Component: 150  -  total flux cleaned = 0.00429469 Jy
! Component: 200  -  total flux cleaned = 0.00428954 Jy
! Total flux subtracted in 200 components = 0.00428954 Jy
! Clean residual min=-0.003866 max=0.003735 Jy/beam
! Clean residual mean=-0.000016 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 3.08792 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 102 components and 3.08792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089613Jy  sigma=0.000635
! Fit after  self-cal, rms=0.089585Jy  sigma=0.000635
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089585Jy  sigma=0.000635
! Fit after  self-cal, rms=0.089600Jy  sigma=0.000635
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.7948 mas, bmaj=1.297 mas, bpa=-6.811 degrees
! Estimated noise=986.907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.64234 Jy
! Component: 100  -  total flux cleaned = 2.28863 Jy
! Component: 150  -  total flux cleaned = 2.60829 Jy
! Component: 200  -  total flux cleaned = 2.78248 Jy
! Total flux subtracted in 200 components = 2.78248 Jy
! Clean residual min=-0.021255 max=0.088291 Jy/beam
! Clean residual mean=-0.000155 rms=0.007517 Jy/beam
! Combined flux in latest and established models = 2.78248 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 2.78248 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.9867 mas, bmaj=1.556 mas, bpa=-5 degrees
! Estimated noise=655.513 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13737 Jy
! Component: 100  -  total flux cleaned = 0.207443 Jy
! Component: 150  -  total flux cleaned = 0.246792 Jy
! Component: 200  -  total flux cleaned = 0.270825 Jy
! Total flux subtracted in 200 components = 0.270825 Jy
! Clean residual min=-0.006725 max=0.013695 Jy/beam
! Clean residual mean=-0.000081 rms=0.001763 Jy/beam
! Combined flux in latest and established models = 3.05331 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 43 components and 3.05331 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (-0.6, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158421 Jy
! Component: 100  -  total flux cleaned = 0.0228487 Jy
! Component: 150  -  total flux cleaned = 0.026796 Jy
! Component: 200  -  total flux cleaned = 0.0299339 Jy
! Total flux subtracted in 200 components = 0.0299339 Jy
! Clean residual min=-0.005373 max=0.006531 Jy/beam
! Clean residual mean=-0.000035 rms=0.001285 Jy/beam
! Combined flux in latest and established models = 3.08324 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 48 components and 3.08324 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (-2.4, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00391054 Jy
! Component: 100  -  total flux cleaned = 0.00648635 Jy
! Component: 150  -  total flux cleaned = 0.00781964 Jy
! Component: 200  -  total flux cleaned = 0.00905009 Jy
! Total flux subtracted in 200 components = 0.00905009 Jy
! Clean residual min=-0.004881 max=0.005228 Jy/beam
! Clean residual mean=-0.000021 rms=0.001158 Jy/beam
! Combined flux in latest and established models = 3.09229 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 61 components and 3.09229 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (-2.6, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114076 Jy
! Component: 100  -  total flux cleaned = 0.00136649 Jy
! Component: 150  -  total flux cleaned = 0.00136295 Jy
! Component: 200  -  total flux cleaned = 0.0011619 Jy
! Total flux subtracted in 200 components = 0.0011619 Jy
! Clean residual min=-0.004464 max=0.004937 Jy/beam
! Clean residual mean=-0.000018 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 3.09345 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 77 components and 3.09345 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (3.6, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125266 Jy
! Component: 100  -  total flux cleaned = 0.00104995 Jy
! Component: 150  -  total flux cleaned = 0.00123265 Jy
! Component: 200  -  total flux cleaned = 0.0012347 Jy
! Total flux subtracted in 200 components = 0.0012347 Jy
! Clean residual min=-0.004213 max=0.004341 Jy/beam
! Clean residual mean=-0.000016 rms=0.001015 Jy/beam
! Combined flux in latest and established models = 3.09469 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 89 components and 3.09469 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (1.2, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117595 Jy
! Component: 100  -  total flux cleaned = 0.00135172 Jy
! Component: 150  -  total flux cleaned = 0.00135141 Jy
! Component: 200  -  total flux cleaned = 0.00135575 Jy
! Total flux subtracted in 200 components = 0.00135575 Jy
! Clean residual min=-0.004000 max=0.003818 Jy/beam
! Clean residual mean=-0.000014 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 3.09604 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 98 components and 3.09604 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=2.24 mas, bmaj=2.561 mas, bpa=1.207 degrees
! Estimated noise=813.136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00114157 Jy
! Component: 100  -  total flux cleaned = -0.00156041 Jy
! Component: 150  -  total flux cleaned = -0.00172368 Jy
! Component: 200  -  total flux cleaned = -0.00186163 Jy
! Total flux subtracted in 200 components = -0.00186163 Jy
! Clean residual min=-0.003319 max=0.002782 Jy/beam
! Clean residual mean=-0.000039 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 3.09418 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00020588 Jy
! Component: 100  -  total flux cleaned = -0.000355547 Jy
! Component: 150  -  total flux cleaned = -0.000456408 Jy
! Component: 200  -  total flux cleaned = -0.000455997 Jy
! Total flux subtracted in 200 components = -0.000455997 Jy
! Clean residual min=-0.003252 max=0.002736 Jy/beam
! Clean residual mean=-0.000041 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 3.09373 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 138 components and 3.09373 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.9867 mas, bmaj=1.556 mas, bpa=-5 degrees
! Estimated noise=655.513 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000263612 Jy
! Component: 100  -  total flux cleaned = 5.11254e-05 Jy
! Component: 150  -  total flux cleaned = 0.000201473 Jy
! Component: 200  -  total flux cleaned = 0.000347611 Jy
! Total flux subtracted in 200 components = 0.000347611 Jy
! Clean residual min=-0.003708 max=0.003648 Jy/beam
! Clean residual mean=-0.000017 rms=0.000906 Jy/beam
! Combined flux in latest and established models = 3.09407 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 144 components and 3.09407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090242Jy  sigma=0.000633
! Fit after  self-cal, rms=0.090075Jy  sigma=0.000632
wmodel J0555+3948_X_2017_03_23_pus_map.mod
! Writing 144 model components to file: J0555+3948_X_2017_03_23_pus_map.mod
wobs J0555+3948_X_2017_03_23_pus_uvs.fits
! Writing UV FITS file: J0555+3948_X_2017_03_23_pus_uvs.fits
wwins J0555+3948_X_2017_03_23_pus_map.win
! wwins: Wrote 9 windows to J0555+3948_X_2017_03_23_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000571068 Jy
! Component: 100  -  total flux cleaned = -0.000309823 Jy
! Component: 150  -  total flux cleaned = -0.00030982 Jy
! Component: 200  -  total flux cleaned = -0.000251228 Jy
! Component: 250  -  total flux cleaned = -0.000252032 Jy
! Component: 300  -  total flux cleaned = -0.000194512 Jy
! Component: 350  -  total flux cleaned = -8.07684e-05 Jy
! Component: 400  -  total flux cleaned = -2.54101e-05 Jy
! Component: 450  -  total flux cleaned = -2.53271e-05 Jy
! Component: 500  -  total flux cleaned = 0.000135885 Jy
! Component: 550  -  total flux cleaned = 0.000188524 Jy
! Component: 600  -  total flux cleaned = 0.00029284 Jy
! Component: 650  -  total flux cleaned = 0.000395722 Jy
! Component: 700  -  total flux cleaned = 0.000599508 Jy
! Component: 750  -  total flux cleaned = 0.000799901 Jy
! Component: 800  -  total flux cleaned = 0.000849214 Jy
! Component: 850  -  total flux cleaned = 0.00119456 Jy
! Component: 900  -  total flux cleaned = 0.00134183 Jy
! Component: 950  -  total flux cleaned = 0.00158364 Jy
! Component: 1000  -  total flux cleaned = 0.0017752 Jy
! Component: 1050  -  total flux cleaned = 0.00206039 Jy
! Component: 1100  -  total flux cleaned = 0.00210718 Jy
! Component: 1150  -  total flux cleaned = 0.00215391 Jy
! Component: 1200  -  total flux cleaned = 0.00238539 Jy
! Component: 1250  -  total flux cleaned = 0.00261496 Jy
! Component: 1300  -  total flux cleaned = 0.0027056 Jy
! Component: 1350  -  total flux cleaned = 0.00306668 Jy
! Component: 1400  -  total flux cleaned = 0.00315597 Jy
! Component: 1450  -  total flux cleaned = 0.00346708 Jy
! Component: 1500  -  total flux cleaned = 0.00355539 Jy
! Component: 1550  -  total flux cleaned = 0.00373069 Jy
! Component: 1600  -  total flux cleaned = 0.00386074 Jy
! Component: 1650  -  total flux cleaned = 0.00399024 Jy
! Component: 1700  -  total flux cleaned = 0.0040334 Jy
! Component: 1750  -  total flux cleaned = 0.0041615 Jy
! Component: 1800  -  total flux cleaned = 0.00437288 Jy
! Component: 1850  -  total flux cleaned = 0.00437302 Jy
! Component: 1900  -  total flux cleaned = 0.00454 Jy
! Component: 1950  -  total flux cleaned = 0.00453981 Jy
! Component: 2000  -  total flux cleaned = 0.00449854 Jy
! Total flux subtracted in 2048 components = 0.00462123 Jy
! Clean residual min=-0.002426 max=0.002373 Jy/beam
! Clean residual mean=-0.000003 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 3.0987 Jy
keep
! Adding 132 model components to the UV plane model.
! The established model now contains 262 components and 3.0987 Jy
![Exited script file: muppet]
wmap "J0555+3948_X_2017_03_23_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9867 x 1.556 at -5 degrees (North through East)
! Clean map  min=-0.0032622  max=2.1995 Jy/beam
! Writing clean map to FITS file: J0555+3948_X_2017_03_23_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.19949 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.042% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000705434 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0962178 0.0962178 0.192436 0.384871 0.769743 1.53949 3.07897 6.15794 12.3159 24.6318 49.2635 98.5271
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0021 
print "peak=",int(1000*peak_flux)/1000
! peak= 2.199 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9867 x 1.556 at -5 degrees (North through East)
! Clean map  min=-0.0032622  max=2.1995 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0555+3948_X_2017_03_23_pus_uvs.log closed on Mon May 13 10:19:08 2019