! Started logfile: J0555+3948_S_2017_05_27_pus_uvs.log on Fri May 3 10:58:08 2019 obs J0555+3948_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0555+3948_S_2017_05_27_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.85 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 3672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0555+3948_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.794399Jy sigma=0.044710 ! Fit after self-cal, rms=2.791494Jy sigma=0.044694 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.55 mas, bmaj=5.865 mas, bpa=-16.26 degrees ! Estimated noise=1097.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.4587 Jy ! Component: 100 - total flux cleaned = 1.4483 Jy ! Total flux subtracted in 100 components = 1.4483 Jy ! Clean residual min=-0.512037 max=0.690372 Jy/beam ! Clean residual mean=-0.001021 rms=0.156225 Jy/beam ! Combined flux in latest and established models = 1.4483 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.4483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.298388Jy sigma=0.063913 ! Fit after self-cal, rms=2.298383Jy sigma=0.063913 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.285 mas, bmaj=6.604 mas, bpa=-13.87 degrees ! Estimated noise=894.947 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0720466 Jy ! Component: 100 - total flux cleaned = 0.0630218 Jy ! Component: 150 - total flux cleaned = 0.0552229 Jy ! Component: 200 - total flux cleaned = 0.0483905 Jy ! Total flux subtracted in 200 components = 0.0483905 Jy ! Clean residual min=-0.424634 max=0.682115 Jy/beam ! Clean residual mean=-0.001161 rms=0.152763 Jy/beam ! Combined flux in latest and established models = 1.49669 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 1.49669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.146422Jy sigma=0.066720 ! Fit after self-cal, rms=2.146416Jy sigma=0.066720 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.70 HN 0.84 KP 0.71 ! LA 0.69 MK 1.05 NL 0.63 OV 22.90 ! PT 0.75 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.73 HN 0.91 KP 0.67 ! LA 0.66 MK 1.02 NL 0.75 OV 0.79 ! PT 0.71 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.75 HN 0.91 KP 0.68 ! LA 0.69 MK 1.08 NL 0.74 OV 0.70 ! PT 0.70 SC 1.08 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.71 HN 0.91 KP 1.00* ! LA 0.74 MK 1.35 NL 1.00* OV 1.00* ! PT 0.72 SC 1.00* ! ! ! Fit before self-cal, rms=2.146416Jy sigma=0.066720 ! Fit after self-cal, rms=11.828837Jy sigma=0.008374 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.128 mas, bmaj=6.601 mas, bpa=-1.904 degrees ! Estimated noise=990.992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.235915 Jy ! Component: 100 - total flux cleaned = 0.331337 Jy ! Component: 150 - total flux cleaned = 0.328618 Jy ! Component: 200 - total flux cleaned = 0.326198 Jy ! Total flux subtracted in 200 components = 0.326198 Jy ! Clean residual min=-0.092089 max=0.080508 Jy/beam ! Clean residual mean=-0.000309 rms=0.022233 Jy/beam ! Combined flux in latest and established models = 1.82289 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 1.82289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=11.796422Jy sigma=0.008032 ! Fit after self-cal, rms=11.796431Jy sigma=0.008030 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=11.796431Jy sigma=0.008030 ! Fit after self-cal, rms=0.189952Jy sigma=0.002026 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.002 mas, bmaj=6.343 mas, bpa=-3.678 degrees ! Estimated noise=980.143 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0505536 Jy ! Component: 100 - total flux cleaned = 0.0566385 Jy ! Component: 150 - total flux cleaned = 0.0558422 Jy ! Component: 200 - total flux cleaned = 0.0551592 Jy ! Total flux subtracted in 200 components = 0.0551592 Jy ! Clean residual min=-0.019098 max=0.024866 Jy/beam ! Clean residual mean=-0.000085 rms=0.005800 Jy/beam ! Combined flux in latest and established models = 1.87805 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 1.87805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171822Jy sigma=0.001801 ! Fit after self-cal, rms=0.171762Jy sigma=0.001801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.5, -45.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139339 Jy ! Component: 100 - total flux cleaned = 0.0118987 Jy ! Component: 150 - total flux cleaned = 0.0100924 Jy ! Component: 200 - total flux cleaned = 0.00899084 Jy ! Total flux subtracted in 200 components = 0.00899084 Jy ! Clean residual min=-0.018735 max=0.024677 Jy/beam ! Clean residual mean=-0.000072 rms=0.005521 Jy/beam ! Combined flux in latest and established models = 1.88704 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 1.88704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165108Jy sigma=0.001733 ! Fit after self-cal, rms=0.164970Jy sigma=0.001731 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164970Jy sigma=0.001731 ! Fit after self-cal, rms=0.146090Jy sigma=0.001631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=6.333 mas, bpa=-2.873 degrees ! Estimated noise=985.073 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352299 Jy ! Component: 100 - total flux cleaned = 0.0429474 Jy ! Component: 150 - total flux cleaned = 0.0419555 Jy ! Component: 200 - total flux cleaned = 0.0401046 Jy ! Total flux subtracted in 200 components = 0.0401046 Jy ! Clean residual min=-0.014850 max=0.019297 Jy/beam ! Clean residual mean=-0.000053 rms=0.004578 Jy/beam ! Combined flux in latest and established models = 1.92714 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 49 components and 1.92714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135849Jy sigma=0.001498 ! Fit after self-cal, rms=0.135832Jy sigma=0.001498 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000849627 Jy ! Component: 100 - total flux cleaned = -0.000459524 Jy ! Component: 150 - total flux cleaned = -0.000467183 Jy ! Component: 200 - total flux cleaned = -0.000464496 Jy ! Total flux subtracted in 200 components = -0.000464496 Jy ! Clean residual min=-0.015140 max=0.019083 Jy/beam ! Clean residual mean=-0.000054 rms=0.004486 Jy/beam ! Combined flux in latest and established models = 1.92668 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 56 components and 1.92668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133368Jy sigma=0.001475 ! Fit after self-cal, rms=0.133355Jy sigma=0.001474 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133355Jy sigma=0.001474 ! Fit after self-cal, rms=0.122965Jy sigma=0.001409 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.138 mas, bmaj=9.819 mas, bpa=-3.173 degrees ! Estimated noise=1121.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224253 Jy ! Component: 100 - total flux cleaned = 0.0300846 Jy ! Component: 150 - total flux cleaned = 0.030701 Jy ! Component: 200 - total flux cleaned = 0.0302262 Jy ! Total flux subtracted in 200 components = 0.0302262 Jy ! Clean residual min=-0.012819 max=0.013192 Jy/beam ! Clean residual mean=-0.000080 rms=0.003511 Jy/beam ! Combined flux in latest and established models = 1.9569 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 1.9569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119320Jy sigma=0.001352 ! Fit after self-cal, rms=0.119292Jy sigma=0.001352 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0015219 Jy ! Component: 100 - total flux cleaned = -0.00190662 Jy ! Component: 150 - total flux cleaned = -0.00214867 Jy ! Component: 200 - total flux cleaned = -0.00237466 Jy ! Total flux subtracted in 200 components = -0.00237466 Jy ! Clean residual min=-0.012734 max=0.012919 Jy/beam ! Clean residual mean=-0.000084 rms=0.003492 Jy/beam ! Combined flux in latest and established models = 1.95453 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 1.95453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118878Jy sigma=0.001347 ! Fit after self-cal, rms=0.118874Jy sigma=0.001347 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.933 mas, bmaj=6.324 mas, bpa=-2.34 degrees ! Estimated noise=988.678 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.933 x 6.324 at -2.34 degrees (North through East) ! Clean map min=-0.029581 max=2.1101 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118874Jy sigma=0.001347 ! Fit after self-cal, rms=0.102142Jy sigma=0.001190 ! Inverting map and beam ! Estimated beam: bmin=3.918 mas, bmaj=6.312 mas, bpa=-2.124 degrees ! Estimated noise=992.929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209795 Jy ! Component: 100 - total flux cleaned = 0.025495 Jy ! Component: 150 - total flux cleaned = 0.0245783 Jy ! Component: 200 - total flux cleaned = 0.024567 Jy ! Total flux subtracted in 200 components = 0.024567 Jy ! Clean residual min=-0.011731 max=0.015943 Jy/beam ! Clean residual mean=-0.000036 rms=0.003418 Jy/beam ! Combined flux in latest and established models = 1.9791 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 1.9791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097371Jy sigma=0.001127 ! Fit after self-cal, rms=0.097366Jy sigma=0.001127 ! Inverting map ! Added new window around map position (-15.5, 37.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781084 Jy ! Component: 100 - total flux cleaned = 0.00754103 Jy ! Component: 150 - total flux cleaned = 0.00520766 Jy ! Component: 200 - total flux cleaned = 0.00492443 Jy ! Total flux subtracted in 200 components = 0.00492443 Jy ! Clean residual min=-0.011260 max=0.014221 Jy/beam ! Clean residual mean=-0.000035 rms=0.003208 Jy/beam ! Combined flux in latest and established models = 1.98402 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 115 components and 1.98402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093361Jy sigma=0.001080 ! Fit after self-cal, rms=0.093286Jy sigma=0.001078 ! Inverting map ! Added new window around map position (17, -86.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329712 Jy ! Component: 100 - total flux cleaned = -0.000881866 Jy ! Component: 150 - total flux cleaned = -0.0034094 Jy ! Component: 200 - total flux cleaned = -0.0048115 Jy ! Total flux subtracted in 200 components = -0.0048115 Jy ! Clean residual min=-0.011241 max=0.012239 Jy/beam ! Clean residual mean=-0.000034 rms=0.003015 Jy/beam ! Combined flux in latest and established models = 1.97921 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 131 components and 1.97921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089943Jy sigma=0.001039 ! Fit after self-cal, rms=0.089857Jy sigma=0.001038 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089857Jy sigma=0.001038 ! Fit after self-cal, rms=0.086599Jy sigma=0.001008 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=5.484 mas, bpa=-4.994 degrees ! Estimated noise=1238.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.64425 Jy ! Component: 100 - total flux cleaned = 2.00281 Jy ! Component: 150 - total flux cleaned = 2.05644 Jy ! Component: 200 - total flux cleaned = 2.05056 Jy ! Total flux subtracted in 200 components = 2.05056 Jy ! Clean residual min=-0.027558 max=0.027466 Jy/beam ! Clean residual mean=-0.000036 rms=0.005516 Jy/beam ! Combined flux in latest and established models = 2.05056 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 2.05056 Jy ! Inverting map and beam ! Estimated beam: bmin=3.899 mas, bmaj=6.302 mas, bpa=-1.94 degrees ! Estimated noise=994.492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0194812 Jy ! Component: 100 - total flux cleaned = -0.0215022 Jy ! Component: 150 - total flux cleaned = -0.019111 Jy ! Component: 200 - total flux cleaned = -0.0183594 Jy ! Total flux subtracted in 200 components = -0.0183594 Jy ! Clean residual min=-0.015506 max=0.016580 Jy/beam ! Clean residual mean=-0.000023 rms=0.003715 Jy/beam ! Combined flux in latest and established models = 2.0322 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 2.0322 Jy ! Inverting map ! Added new window around map position (13.5, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432138 Jy ! Component: 100 - total flux cleaned = 0.00370633 Jy ! Component: 150 - total flux cleaned = 0.00254027 Jy ! Component: 200 - total flux cleaned = 0.000397832 Jy ! Total flux subtracted in 200 components = 0.000397832 Jy ! Clean residual min=-0.013368 max=0.013010 Jy/beam ! Clean residual mean=-0.000020 rms=0.003338 Jy/beam ! Combined flux in latest and established models = 2.0326 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 43 components and 2.0326 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.092 mas, bmaj=9.784 mas, bpa=-2.55 degrees ! Estimated noise=1138.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00938534 Jy ! Component: 100 - total flux cleaned = -0.0116886 Jy ! Component: 150 - total flux cleaned = -0.0134399 Jy ! Component: 200 - total flux cleaned = -0.0144987 Jy ! Total flux subtracted in 200 components = -0.0144987 Jy ! Clean residual min=-0.009219 max=0.008848 Jy/beam ! Clean residual mean=-0.000042 rms=0.002571 Jy/beam ! Combined flux in latest and established models = 2.0181 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000495058 Jy ! Component: 100 - total flux cleaned = -0.00142581 Jy ! Component: 150 - total flux cleaned = -0.00229805 Jy ! Component: 200 - total flux cleaned = -0.00292556 Jy ! Total flux subtracted in 200 components = -0.00292556 Jy ! Clean residual min=-0.008664 max=0.008412 Jy/beam ! Clean residual mean=-0.000043 rms=0.002455 Jy/beam ! Combined flux in latest and established models = 2.01518 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 81 components and 2.01518 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.899 mas, bmaj=6.302 mas, bpa=-1.94 degrees ! Estimated noise=994.492 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203965 Jy ! Component: 100 - total flux cleaned = -0.00236925 Jy ! Component: 150 - total flux cleaned = -0.0027869 Jy ! Component: 200 - total flux cleaned = -0.00353622 Jy ! Total flux subtracted in 200 components = -0.00353622 Jy ! Clean residual min=-0.010595 max=0.011425 Jy/beam ! Clean residual mean=-0.000024 rms=0.002931 Jy/beam ! Combined flux in latest and established models = 2.01164 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 93 components and 2.01164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089077Jy sigma=0.001016 ! Fit after self-cal, rms=0.088761Jy sigma=0.001012 wmodel J0555+3948_S_2017_05_27_pus_map.mod ! Writing 93 model components to file: J0555+3948_S_2017_05_27_pus_map.mod wobs J0555+3948_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0555+3948_S_2017_05_27_pus_uvs.fits wwins J0555+3948_S_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J0555+3948_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00529219 Jy ! Component: 100 - total flux cleaned = 0.00946821 Jy ! Component: 150 - total flux cleaned = 0.0129219 Jy ! Component: 200 - total flux cleaned = 0.0166388 Jy ! Component: 250 - total flux cleaned = 0.0198935 Jy ! Component: 300 - total flux cleaned = 0.022192 Jy ! Component: 350 - total flux cleaned = 0.0239259 Jy ! Component: 400 - total flux cleaned = 0.0257935 Jy ! Component: 450 - total flux cleaned = 0.0277899 Jy ! Component: 500 - total flux cleaned = 0.0297445 Jy ! Component: 550 - total flux cleaned = 0.0311815 Jy ! Component: 600 - total flux cleaned = 0.0330685 Jy ! Component: 650 - total flux cleaned = 0.034463 Jy ! Component: 700 - total flux cleaned = 0.0361359 Jy ! Component: 750 - total flux cleaned = 0.0374855 Jy ! Component: 800 - total flux cleaned = 0.038668 Jy ! Component: 850 - total flux cleaned = 0.0399808 Jy ! Component: 900 - total flux cleaned = 0.0414177 Jy ! Component: 950 - total flux cleaned = 0.0431152 Jy ! Component: 1000 - total flux cleaned = 0.0442291 Jy ! Component: 1050 - total flux cleaned = 0.0451934 Jy ! Component: 1100 - total flux cleaned = 0.0466843 Jy ! Component: 1150 - total flux cleaned = 0.0474864 Jy ! Component: 1200 - total flux cleaned = 0.0490699 Jy ! Component: 1250 - total flux cleaned = 0.0492009 Jy ! Component: 1300 - total flux cleaned = 0.0499784 Jy ! Component: 1350 - total flux cleaned = 0.0507432 Jy ! Component: 1400 - total flux cleaned = 0.0513739 Jy ! Component: 1450 - total flux cleaned = 0.0516244 Jy ! Component: 1500 - total flux cleaned = 0.0519962 Jy ! Component: 1550 - total flux cleaned = 0.0523636 Jy ! Component: 1600 - total flux cleaned = 0.0524845 Jy ! Component: 1650 - total flux cleaned = 0.0533191 Jy ! Component: 1700 - total flux cleaned = 0.0539069 Jy ! Component: 1750 - total flux cleaned = 0.0543713 Jy ! Component: 1800 - total flux cleaned = 0.0547179 Jy ! Component: 1850 - total flux cleaned = 0.0552892 Jy ! Component: 1900 - total flux cleaned = 0.0561926 Jy ! Component: 1950 - total flux cleaned = 0.0565273 Jy ! Component: 2000 - total flux cleaned = 0.0570812 Jy ! Component: 2050 - total flux cleaned = 0.0577389 Jy ! Component: 2100 - total flux cleaned = 0.0584962 Jy ! Component: 2150 - total flux cleaned = 0.0590328 Jy ! Component: 2200 - total flux cleaned = 0.0598846 Jy ! Component: 2250 - total flux cleaned = 0.0601998 Jy ! Component: 2300 - total flux cleaned = 0.0601999 Jy ! Component: 2350 - total flux cleaned = 0.0608242 Jy ! Component: 2400 - total flux cleaned = 0.061748 Jy ! Component: 2450 - total flux cleaned = 0.0614441 Jy ! Component: 2500 - total flux cleaned = 0.0621497 Jy ! Component: 2550 - total flux cleaned = 0.062649 Jy ! Component: 2600 - total flux cleaned = 0.0630437 Jy ! Component: 2650 - total flux cleaned = 0.0632402 Jy ! Component: 2700 - total flux cleaned = 0.0635314 Jy ! Component: 2750 - total flux cleaned = 0.0641085 Jy ! Component: 2800 - total flux cleaned = 0.0642039 Jy ! Component: 2850 - total flux cleaned = 0.0647723 Jy ! Component: 2900 - total flux cleaned = 0.0648648 Jy ! Component: 2950 - total flux cleaned = 0.0655155 Jy ! Component: 3000 - total flux cleaned = 0.0657917 Jy ! Component: 3050 - total flux cleaned = 0.0659754 Jy ! Component: 3100 - total flux cleaned = 0.0664288 Jy ! Component: 3150 - total flux cleaned = 0.0669672 Jy ! Component: 3200 - total flux cleaned = 0.0671457 Jy ! Component: 3250 - total flux cleaned = 0.0672339 Jy ! Component: 3300 - total flux cleaned = 0.0677608 Jy ! Component: 3350 - total flux cleaned = 0.0681073 Jy ! Component: 3400 - total flux cleaned = 0.0681075 Jy ! Component: 3450 - total flux cleaned = 0.0682779 Jy ! Component: 3500 - total flux cleaned = 0.0688717 Jy ! Component: 3550 - total flux cleaned = 0.0686201 Jy ! Component: 3600 - total flux cleaned = 0.0690358 Jy ! Component: 3650 - total flux cleaned = 0.0690365 Jy ! Component: 3700 - total flux cleaned = 0.0692822 Jy ! Component: 3750 - total flux cleaned = 0.0692017 Jy ! Component: 3800 - total flux cleaned = 0.0697663 Jy ! Component: 3850 - total flux cleaned = 0.0699269 Jy ! Component: 3900 - total flux cleaned = 0.0700066 Jy ! Component: 3950 - total flux cleaned = 0.0703218 Jy ! Component: 4000 - total flux cleaned = 0.0703212 Jy ! Component: 4050 - total flux cleaned = 0.0700895 Jy ! Total flux subtracted in 4096 components = 0.0703968 Jy ! Clean residual min=-0.004104 max=0.004001 Jy/beam ! Clean residual mean=-0.000005 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 2.08204 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 366 components and 2.08204 Jy ![Exited script file: muppet] wmap "J0555+3948_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.899 x 6.302 at -1.94 degrees (North through East) ! Clean map min=-0.014023 max=2.1088 Jy/beam ! Writing clean map to FITS file: J0555+3948_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.10885 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00142175 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.202254 0.202254 0.404509 0.809017 1.61803 3.23607 6.47214 12.9443 25.8885 51.7771 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0042 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.899 x 6.302 at -1.94 degrees (North through East) ! Clean map min=-0.014023 max=2.1088 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0555+3948_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:58:13 2019