! Started logfile: J0555+3948_S_2017_05_01_pus_uvs.log on Wed May 1 18:28:38 2019 obs J0555+3948_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0555+3948_S_2017_05_01_pus_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.844444 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 5928 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0555+3948_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.220509Jy sigma=0.032519 ! Fit after self-cal, rms=2.216306Jy sigma=0.032493 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=4.661 mas, bpa=25.95 degrees ! Estimated noise=1075.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.79188 Jy ! Component: 100 - total flux cleaned = 2.57791 Jy ! Total flux subtracted in 100 components = 2.57791 Jy ! Clean residual min=-0.245387 max=0.359594 Jy/beam ! Clean residual mean=0.000081 rms=0.076540 Jy/beam ! Combined flux in latest and established models = 2.57791 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 2.57791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.120439Jy sigma=0.029357 ! Fit after self-cal, rms=1.120206Jy sigma=0.029357 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=5.501 mas, bpa=29.7 degrees ! Estimated noise=900.718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.46975 Jy ! Component: 100 - total flux cleaned = 0.720563 Jy ! Component: 150 - total flux cleaned = 0.86728 Jy ! Component: 200 - total flux cleaned = 0.955411 Jy ! Total flux subtracted in 200 components = 0.955411 Jy ! Clean residual min=-0.196844 max=0.162593 Jy/beam ! Clean residual mean=0.000044 rms=0.053050 Jy/beam ! Combined flux in latest and established models = 3.53333 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 20 components and 3.53332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.877559Jy sigma=0.024638 ! Fit after self-cal, rms=0.877537Jy sigma=0.024638 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.91 HN 0.98 KP 1.05 ! LA 1.03 MK 0.98 NL 0.98 OV 1.02 ! PT 1.05 SC 0.75 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.95 HN 1.10 KP 0.99 ! LA 0.98 MK 0.92 NL 1.02 OV 0.98 ! PT 1.01 SC 8.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.97 HN 1.00 KP 1.01 ! LA 1.03 MK 1.04 NL 1.04 OV 0.93 ! PT 1.01 SC 0.77 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.97 HN 1.00 KP 1.00* ! LA 1.05 MK 1.25 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.877537Jy sigma=0.024638 ! Fit after self-cal, rms=5.254923Jy sigma=0.007378 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.815 mas, bmaj=5.669 mas, bpa=4.081 degrees ! Estimated noise=1193.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00207947 Jy ! Component: 100 - total flux cleaned = -0.0365442 Jy ! Component: 150 - total flux cleaned = -0.0706744 Jy ! Component: 200 - total flux cleaned = -0.0921055 Jy ! Total flux subtracted in 200 components = -0.0921055 Jy ! Clean residual min=-0.093235 max=0.090705 Jy/beam ! Clean residual mean=0.000230 rms=0.021318 Jy/beam ! Combined flux in latest and established models = 3.44122 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 25 components and 3.44122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.165450Jy sigma=0.006657 ! Fit after self-cal, rms=5.165458Jy sigma=0.006657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.165458Jy sigma=0.006657 ! Fit after self-cal, rms=5.446745Jy sigma=0.003803 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.782 mas, bmaj=5.698 mas, bpa=3.946 degrees ! Estimated noise=1197.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301238 Jy ! Component: 100 - total flux cleaned = -0.0133075 Jy ! Component: 150 - total flux cleaned = -0.0237325 Jy ! Component: 200 - total flux cleaned = -0.0322395 Jy ! Total flux subtracted in 200 components = -0.0322395 Jy ! Clean residual min=-0.055739 max=0.052711 Jy/beam ! Clean residual mean=0.000021 rms=0.011728 Jy/beam ! Combined flux in latest and established models = 3.40898 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 3.40898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.416067Jy sigma=0.003641 ! Fit after self-cal, rms=5.416068Jy sigma=0.003641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00715429 Jy ! Component: 100 - total flux cleaned = -0.0117427 Jy ! Component: 150 - total flux cleaned = -0.0169674 Jy ! Component: 200 - total flux cleaned = -0.0214177 Jy ! Total flux subtracted in 200 components = -0.0214177 Jy ! Clean residual min=-0.052311 max=0.054777 Jy/beam ! Clean residual mean=0.000025 rms=0.011464 Jy/beam ! Combined flux in latest and established models = 3.38756 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 3.38756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.403475Jy sigma=0.003669 ! Fit after self-cal, rms=5.403473Jy sigma=0.003669 ! Inverting map ! Added new window around map position (11, -41). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0368746 Jy ! Component: 100 - total flux cleaned = 0.0354618 Jy ! Component: 150 - total flux cleaned = 0.032966 Jy ! Component: 200 - total flux cleaned = 0.0307147 Jy ! Total flux subtracted in 200 components = 0.0307147 Jy ! Clean residual min=-0.050002 max=0.052059 Jy/beam ! Clean residual mean=0.000055 rms=0.010903 Jy/beam ! Combined flux in latest and established models = 3.41828 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 3.41828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.395308Jy sigma=0.003644 ! Fit after self-cal, rms=5.395282Jy sigma=0.003641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.395282Jy sigma=0.003641 ! Fit after self-cal, rms=0.235384Jy sigma=0.001786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=5.726 mas, bpa=3.173 degrees ! Estimated noise=1199.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0122293 Jy ! Component: 100 - total flux cleaned = -0.0145699 Jy ! Component: 150 - total flux cleaned = -0.0165222 Jy ! Component: 200 - total flux cleaned = -0.0182134 Jy ! Total flux subtracted in 200 components = -0.0182134 Jy ! Clean residual min=-0.033980 max=0.023354 Jy/beam ! Clean residual mean=0.000018 rms=0.006207 Jy/beam ! Combined flux in latest and established models = 3.40006 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 3.40006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225078Jy sigma=0.001684 ! Fit after self-cal, rms=0.225084Jy sigma=0.001684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000798242 Jy ! Component: 100 - total flux cleaned = -0.000798194 Jy ! Component: 150 - total flux cleaned = -0.000104131 Jy ! Component: 200 - total flux cleaned = 0.000545804 Jy ! Total flux subtracted in 200 components = 0.000545804 Jy ! Clean residual min=-0.032693 max=0.022745 Jy/beam ! Clean residual mean=0.000016 rms=0.006022 Jy/beam ! Combined flux in latest and established models = 3.40061 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 3.40061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221345Jy sigma=0.001637 ! Fit after self-cal, rms=0.221340Jy sigma=0.001637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221340Jy sigma=0.001637 ! Fit after self-cal, rms=0.220858Jy sigma=0.001600 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.066 mas, bmaj=9.205 mas, bpa=4.208 degrees ! Estimated noise=1454.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0140011 Jy ! Component: 100 - total flux cleaned = -0.0172569 Jy ! Component: 150 - total flux cleaned = -0.0177645 Jy ! Component: 200 - total flux cleaned = -0.0177589 Jy ! Total flux subtracted in 200 components = -0.0177589 Jy ! Clean residual min=-0.016641 max=0.017476 Jy/beam ! Clean residual mean=0.000022 rms=0.004441 Jy/beam ! Combined flux in latest and established models = 3.38285 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 3.38285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220475Jy sigma=0.001611 ! Fit after self-cal, rms=0.220469Jy sigma=0.001611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.4787e-05 Jy ! Component: 100 - total flux cleaned = -0.000165131 Jy ! Component: 150 - total flux cleaned = -0.000345103 Jy ! Component: 200 - total flux cleaned = -0.000505111 Jy ! Total flux subtracted in 200 components = -0.000505111 Jy ! Clean residual min=-0.016510 max=0.017355 Jy/beam ! Clean residual mean=0.000025 rms=0.004414 Jy/beam ! Combined flux in latest and established models = 3.38234 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 3.38235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220189Jy sigma=0.001611 ! Fit after self-cal, rms=0.220193Jy sigma=0.001611 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=5.761 mas, bpa=2.188 degrees ! Estimated noise=1202.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.788 x 5.761 at 2.188 degrees (North through East) ! Clean map min=-0.030457 max=2.9804 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220193Jy sigma=0.001611 ! Fit after self-cal, rms=0.206184Jy sigma=0.001499 ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=5.764 mas, bpa=1.969 degrees ! Estimated noise=1200.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0111492 Jy ! Component: 100 - total flux cleaned = -0.0129751 Jy ! Component: 150 - total flux cleaned = -0.0145565 Jy ! Component: 200 - total flux cleaned = -0.0123956 Jy ! Total flux subtracted in 200 components = -0.0123956 Jy ! Clean residual min=-0.029632 max=0.020001 Jy/beam ! Clean residual mean=0.000007 rms=0.005369 Jy/beam ! Combined flux in latest and established models = 3.36995 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 3.36995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198017Jy sigma=0.001419 ! Fit after self-cal, rms=0.198020Jy sigma=0.001419 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000676338 Jy ! Component: 100 - total flux cleaned = 0.000666953 Jy ! Component: 150 - total flux cleaned = 0.000674045 Jy ! Component: 200 - total flux cleaned = 0.00128693 Jy ! Total flux subtracted in 200 components = 0.00128693 Jy ! Clean residual min=-0.028447 max=0.019491 Jy/beam ! Clean residual mean=0.000005 rms=0.005198 Jy/beam ! Combined flux in latest and established models = 3.37124 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 3.37124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194371Jy sigma=0.001375 ! Fit after self-cal, rms=0.194376Jy sigma=0.001375 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194376Jy sigma=0.001375 ! Fit after self-cal, rms=0.194336Jy sigma=0.001350 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=4.98 mas, bpa=-4.451 degrees ! Estimated noise=1508.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.29557 Jy ! Component: 100 - total flux cleaned = 2.86356 Jy ! Component: 150 - total flux cleaned = 3.08428 Jy ! Component: 200 - total flux cleaned = 3.19571 Jy ! Total flux subtracted in 200 components = 3.19571 Jy ! Clean residual min=-0.031067 max=0.054863 Jy/beam ! Clean residual mean=0.000022 rms=0.006701 Jy/beam ! Combined flux in latest and established models = 3.19571 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 3.19571 Jy ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=5.791 mas, bpa=1.244 degrees ! Estimated noise=1202.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0739788 Jy ! Component: 100 - total flux cleaned = 0.112755 Jy ! Component: 150 - total flux cleaned = 0.137315 Jy ! Component: 200 - total flux cleaned = 0.150739 Jy ! Total flux subtracted in 200 components = 0.150739 Jy ! Clean residual min=-0.019143 max=0.020966 Jy/beam ! Clean residual mean=-0.000007 rms=0.004292 Jy/beam ! Combined flux in latest and established models = 3.34645 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 3.34645 Jy ! Inverting map ! Added new window around map position (-17.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606008 Jy ! Component: 100 - total flux cleaned = 0.00606017 Jy ! Component: 150 - total flux cleaned = 0.00714527 Jy ! Component: 200 - total flux cleaned = 0.00814602 Jy ! Total flux subtracted in 200 components = 0.00814602 Jy ! Clean residual min=-0.018052 max=0.019333 Jy/beam ! Clean residual mean=-0.000003 rms=0.003998 Jy/beam ! Combined flux in latest and established models = 3.35459 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 50 components and 3.35459 Jy ! Inverting map ! Added new window around map position (17.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041811 Jy ! Component: 100 - total flux cleaned = 0.00603938 Jy ! Component: 150 - total flux cleaned = 0.00657169 Jy ! Component: 200 - total flux cleaned = 0.00850496 Jy ! Total flux subtracted in 200 components = 0.00850496 Jy ! Clean residual min=-0.016299 max=0.015117 Jy/beam ! Clean residual mean=-0.000002 rms=0.003721 Jy/beam ! Combined flux in latest and established models = 3.3631 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 3.3631 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.072 mas, bmaj=9.23 mas, bpa=3.253 degrees ! Estimated noise=1447.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00952649 Jy ! Component: 100 - total flux cleaned = 0.0114009 Jy ! Component: 150 - total flux cleaned = 0.0124425 Jy ! Component: 200 - total flux cleaned = 0.013397 Jy ! Total flux subtracted in 200 components = 0.013397 Jy ! Clean residual min=-0.013899 max=0.014216 Jy/beam ! Clean residual mean=-0.000015 rms=0.003721 Jy/beam ! Combined flux in latest and established models = 3.3765 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000883182 Jy ! Component: 100 - total flux cleaned = 0.00129917 Jy ! Component: 150 - total flux cleaned = 0.0018853 Jy ! Component: 200 - total flux cleaned = 0.00225733 Jy ! Total flux subtracted in 200 components = 0.00225733 Jy ! Clean residual min=-0.013619 max=0.013676 Jy/beam ! Clean residual mean=-0.000015 rms=0.003676 Jy/beam ! Combined flux in latest and established models = 3.37875 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 3.37875 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=5.791 mas, bpa=1.244 degrees ! Estimated noise=1202.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015593 Jy ! Component: 100 - total flux cleaned = 0.00069669 Jy ! Component: 150 - total flux cleaned = 0.000299485 Jy ! Component: 200 - total flux cleaned = -0.000464475 Jy ! Total flux subtracted in 200 components = -0.000464475 Jy ! Clean residual min=-0.017121 max=0.014103 Jy/beam ! Clean residual mean=-0.000003 rms=0.003540 Jy/beam ! Combined flux in latest and established models = 3.37829 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 110 components and 3.37829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165008Jy sigma=0.001009 ! Fit after self-cal, rms=0.164756Jy sigma=0.001006 wmodel J0555+3948_S_2017_05_01_pus_map.mod ! Writing 110 model components to file: J0555+3948_S_2017_05_01_pus_map.mod wobs J0555+3948_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0555+3948_S_2017_05_01_pus_uvs.fits wwins J0555+3948_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J0555+3948_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00399908 Jy ! Component: 100 - total flux cleaned = -0.00718611 Jy ! Component: 150 - total flux cleaned = -0.009962 Jy ! Component: 200 - total flux cleaned = -0.012869 Jy ! Component: 250 - total flux cleaned = -0.0147437 Jy ! Component: 300 - total flux cleaned = -0.0158793 Jy ! Component: 350 - total flux cleaned = -0.0161023 Jy ! Component: 400 - total flux cleaned = -0.0163181 Jy ! Component: 450 - total flux cleaned = -0.0163171 Jy ! Component: 500 - total flux cleaned = -0.0167354 Jy ! Component: 550 - total flux cleaned = -0.0169383 Jy ! Component: 600 - total flux cleaned = -0.0173373 Jy ! Component: 650 - total flux cleaned = -0.0171344 Jy ! Component: 700 - total flux cleaned = -0.0175198 Jy ! Component: 750 - total flux cleaned = -0.0175177 Jy ! Component: 800 - total flux cleaned = -0.0173249 Jy ! Component: 850 - total flux cleaned = -0.0173245 Jy ! Component: 900 - total flux cleaned = -0.0175103 Jy ! Component: 950 - total flux cleaned = -0.0178724 Jy ! Component: 1000 - total flux cleaned = -0.0175106 Jy ! Component: 1050 - total flux cleaned = -0.0168032 Jy ! Component: 1100 - total flux cleaned = -0.0171515 Jy ! Component: 1150 - total flux cleaned = -0.0166354 Jy ! Component: 1200 - total flux cleaned = -0.0171508 Jy ! Component: 1250 - total flux cleaned = -0.0171516 Jy ! Component: 1300 - total flux cleaned = -0.0171486 Jy ! Component: 1350 - total flux cleaned = -0.0171516 Jy ! Component: 1400 - total flux cleaned = -0.0176435 Jy ! Component: 1450 - total flux cleaned = -0.0173214 Jy ! Component: 1500 - total flux cleaned = -0.0174813 Jy ! Component: 1550 - total flux cleaned = -0.0174821 Jy ! Component: 1600 - total flux cleaned = -0.0174799 Jy ! Component: 1650 - total flux cleaned = -0.0176363 Jy ! Component: 1700 - total flux cleaned = -0.0174804 Jy ! Component: 1750 - total flux cleaned = -0.0176336 Jy ! Component: 1800 - total flux cleaned = -0.0183895 Jy ! Component: 1850 - total flux cleaned = -0.0182391 Jy ! Component: 1900 - total flux cleaned = -0.0179416 Jy ! Component: 1950 - total flux cleaned = -0.0177943 Jy ! Component: 2000 - total flux cleaned = -0.0179425 Jy ! Component: 2050 - total flux cleaned = -0.0176552 Jy ! Component: 2100 - total flux cleaned = -0.0182303 Jy ! Component: 2150 - total flux cleaned = -0.0182307 Jy ! Component: 2200 - total flux cleaned = -0.017947 Jy ! Component: 2250 - total flux cleaned = -0.0183663 Jy ! Component: 2300 - total flux cleaned = -0.0182267 Jy ! Component: 2350 - total flux cleaned = -0.017952 Jy ! Component: 2400 - total flux cleaned = -0.0187672 Jy ! Component: 2450 - total flux cleaned = -0.0178246 Jy ! Component: 2500 - total flux cleaned = -0.0180945 Jy ! Component: 2550 - total flux cleaned = -0.0176967 Jy ! Component: 2600 - total flux cleaned = -0.0180922 Jy ! Component: 2650 - total flux cleaned = -0.0187452 Jy ! Component: 2700 - total flux cleaned = -0.0187444 Jy ! Component: 2750 - total flux cleaned = -0.0183599 Jy ! Component: 2800 - total flux cleaned = -0.018358 Jy ! Component: 2850 - total flux cleaned = -0.0186108 Jy ! Component: 2900 - total flux cleaned = -0.0183614 Jy ! Component: 2950 - total flux cleaned = -0.0186114 Jy ! Component: 3000 - total flux cleaned = -0.0187349 Jy ! Component: 3050 - total flux cleaned = -0.018612 Jy ! Component: 3100 - total flux cleaned = -0.0188561 Jy ! Component: 3150 - total flux cleaned = -0.0190974 Jy ! Component: 3200 - total flux cleaned = -0.019695 Jy ! Component: 3250 - total flux cleaned = -0.0199323 Jy ! Component: 3300 - total flux cleaned = -0.0200507 Jy ! Component: 3350 - total flux cleaned = -0.0204012 Jy ! Component: 3400 - total flux cleaned = -0.0205188 Jy ! Component: 3450 - total flux cleaned = -0.0213273 Jy ! Component: 3500 - total flux cleaned = -0.0206401 Jy ! Component: 3550 - total flux cleaned = -0.021437 Jy ! Component: 3600 - total flux cleaned = -0.0218888 Jy ! Component: 3650 - total flux cleaned = -0.0218882 Jy ! Component: 3700 - total flux cleaned = -0.0222213 Jy ! Component: 3750 - total flux cleaned = -0.0224425 Jy ! Component: 3800 - total flux cleaned = -0.0228817 Jy ! Component: 3850 - total flux cleaned = -0.0229911 Jy ! Component: 3900 - total flux cleaned = -0.0232094 Jy ! Component: 3950 - total flux cleaned = -0.0233178 Jy ! Component: 4000 - total flux cleaned = -0.0241721 Jy ! Component: 4050 - total flux cleaned = -0.0239608 Jy ! Total flux subtracted in 4096 components = -0.0243829 Jy ! Clean residual min=-0.005774 max=0.005609 Jy/beam ! Clean residual mean=0.000002 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 3.35391 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 438 components and 3.3539 Jy ![Exited script file: muppet] wmap "J0555+3948_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.797 x 5.791 at 1.244 degrees (North through East) ! Clean map min=-0.01473 max=2.9809 Jy/beam ! Writing clean map to FITS file: J0555+3948_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.98094 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00197002 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.198262 0.198262 0.396524 0.793047 1.58609 3.17219 6.34438 12.6888 25.3775 50.755 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0059 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.98 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.797 x 5.791 at 1.244 degrees (North through East) ! Clean map min=-0.01473 max=2.9809 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0555+3948_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:28:44 2019