! Started logfile: J0554+6857_S_2017_07_16_pus_uvs.log on Thu May 9 11:02:22 2019 obs J0554+6857_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0554+6857_S_2017_07_16_pus_uva.fits ! AN table 1: 174 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.724904 visibilities/baseline/integration-bin. ! Found source: J0554+6857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 22704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0554+6857_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 265 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 250 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1129 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955102Jy sigma=0.008782 ! Fit after self-cal, rms=0.938390Jy sigma=0.008632 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=3.67 mas, bpa=33.93 degrees ! Estimated noise=1036.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.049517 Jy ! Component: 100 - total flux cleaned = 0.0610802 Jy ! Total flux subtracted in 100 components = 0.0610802 Jy ! Clean residual min=-0.004125 max=0.004519 Jy/beam ! Clean residual mean=-0.000013 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.0610802 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0610802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076969Jy sigma=0.000680 ! Fit after self-cal, rms=0.076902Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=4.477 mas, bpa=31.46 degrees ! Estimated noise=593.971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063822 Jy ! Component: 100 - total flux cleaned = 0.00990035 Jy ! Component: 150 - total flux cleaned = 0.0121055 Jy ! Component: 200 - total flux cleaned = 0.0132355 Jy ! Total flux subtracted in 200 components = 0.0132355 Jy ! Clean residual min=-0.002727 max=0.002380 Jy/beam ! Clean residual mean=-0.000009 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0743157 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 44 components and 0.0743157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076369Jy sigma=0.000674 ! Fit after self-cal, rms=0.076343Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.00 KP 1.06 ! LA 1.02 MK 1.07 NL 0.89 OV 1.02 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.04 KP 1.06 ! LA 0.97 MK 1.07 NL 1.01 OV 1.01 ! PT 0.95 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.05 KP 1.01 ! LA 1.02 MK 1.09 NL 0.97 OV 0.94 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 4. ! A total of 171 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.94 KP 1.00* ! LA 0.95 MK 0.85 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.076343Jy sigma=0.000674 ! Fit after self-cal, rms=0.075844Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.503 mas, bmaj=4.508 mas, bpa=30.94 degrees ! Estimated noise=591.923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131445 Jy ! Component: 100 - total flux cleaned = 0.00164847 Jy ! Component: 150 - total flux cleaned = 0.00160114 Jy ! Component: 200 - total flux cleaned = 0.00151195 Jy ! Total flux subtracted in 200 components = 0.00151195 Jy ! Clean residual min=-0.002462 max=0.002275 Jy/beam ! Clean residual mean=-0.000013 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0758277 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.0758277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075801Jy sigma=0.000673 ! Fit after self-cal, rms=0.075832Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075832Jy sigma=0.000673 ! Fit after self-cal, rms=0.076204Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=4.512 mas, bpa=30.68 degrees ! Estimated noise=593.757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116839 Jy ! Component: 100 - total flux cleaned = 0.00142619 Jy ! Component: 150 - total flux cleaned = 0.00140721 Jy ! Component: 200 - total flux cleaned = 0.00139006 Jy ! Total flux subtracted in 200 components = 0.00139006 Jy ! Clean residual min=-0.002266 max=0.002419 Jy/beam ! Clean residual mean=-0.000009 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0772178 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.0772178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076182Jy sigma=0.000671 ! Fit after self-cal, rms=0.076270Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286127 Jy ! Component: 100 - total flux cleaned = 0.000286508 Jy ! Component: 150 - total flux cleaned = 0.000270165 Jy ! Component: 200 - total flux cleaned = 0.000255578 Jy ! Total flux subtracted in 200 components = 0.000255578 Jy ! Clean residual min=-0.002201 max=0.002312 Jy/beam ! Clean residual mean=-0.000010 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0774733 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.0774733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076262Jy sigma=0.000671 ! Fit after self-cal, rms=0.076264Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076264Jy sigma=0.000671 ! Fit after self-cal, rms=0.077498Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.492 mas, bmaj=4.531 mas, bpa=30.74 degrees ! Estimated noise=597.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00085693 Jy ! Component: 100 - total flux cleaned = 0.00107431 Jy ! Component: 150 - total flux cleaned = 0.00115617 Jy ! Component: 200 - total flux cleaned = 0.00122828 Jy ! Total flux subtracted in 200 components = 0.00122828 Jy ! Clean residual min=-0.002167 max=0.002422 Jy/beam ! Clean residual mean=-0.000008 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0787016 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.0787016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077481Jy sigma=0.000670 ! Fit after self-cal, rms=0.077528Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241769 Jy ! Component: 100 - total flux cleaned = 0.00022694 Jy ! Component: 150 - total flux cleaned = 0.000253327 Jy ! Component: 200 - total flux cleaned = 0.000264818 Jy ! Total flux subtracted in 200 components = 0.000264818 Jy ! Clean residual min=-0.002135 max=0.002340 Jy/beam ! Clean residual mean=-0.000008 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0789664 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.0789664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077522Jy sigma=0.000670 ! Fit after self-cal, rms=0.077522Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077522Jy sigma=0.000670 ! Fit after self-cal, rms=0.078294Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.354 mas, bmaj=8.567 mas, bpa=41.8 degrees ! Estimated noise=783.555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000726545 Jy ! Component: 100 - total flux cleaned = 0.00108324 Jy ! Component: 150 - total flux cleaned = 0.00120903 Jy ! Component: 200 - total flux cleaned = 0.00124784 Jy ! Total flux subtracted in 200 components = 0.00124784 Jy ! Clean residual min=-0.002510 max=0.003400 Jy/beam ! Clean residual mean=-0.000012 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.0802142 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.0802142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078289Jy sigma=0.000670 ! Fit after self-cal, rms=0.078310Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.86808e-05 Jy ! Component: 100 - total flux cleaned = 9.13385e-05 Jy ! Component: 150 - total flux cleaned = 8.51236e-05 Jy ! Component: 200 - total flux cleaned = 8.51946e-05 Jy ! Total flux subtracted in 200 components = 8.51946e-05 Jy ! Clean residual min=-0.002535 max=0.003399 Jy/beam ! Clean residual mean=-0.000013 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.0802994 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 113 components and 0.0802994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078310Jy sigma=0.000670 ! Fit after self-cal, rms=0.078310Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=4.54 mas, bpa=30.82 degrees ! Estimated noise=601.398 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.482 x 4.54 at 30.82 degrees (North through East) ! Clean map min=-0.0020248 max=0.062125 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=3.72 mas, bpa=32.27 degrees ! Estimated noise=998.258 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490922 Jy ! Component: 100 - total flux cleaned = 0.0613564 Jy ! Component: 150 - total flux cleaned = 0.0676633 Jy ! Component: 200 - total flux cleaned = 0.0715719 Jy ! Total flux subtracted in 200 components = 0.0715719 Jy ! Clean residual min=-0.002918 max=0.003483 Jy/beam ! Clean residual mean=-0.000010 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0715719 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0715719 Jy ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=4.54 mas, bpa=30.82 degrees ! Estimated noise=601.398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00369669 Jy ! Component: 100 - total flux cleaned = 0.0058553 Jy ! Component: 150 - total flux cleaned = 0.00701652 Jy ! Component: 200 - total flux cleaned = 0.00751274 Jy ! Total flux subtracted in 200 components = 0.00751274 Jy ! Clean residual min=-0.002132 max=0.002320 Jy/beam ! Clean residual mean=-0.000008 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0790846 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 42 components and 0.0790846 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.354 mas, bmaj=8.567 mas, bpa=41.8 degrees ! Estimated noise=783.555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000948956 Jy ! Component: 100 - total flux cleaned = 0.00111716 Jy ! Component: 150 - total flux cleaned = 0.0011729 Jy ! Component: 200 - total flux cleaned = 0.00120304 Jy ! Total flux subtracted in 200 components = 0.00120304 Jy ! Clean residual min=-0.002462 max=0.003465 Jy/beam ! Clean residual mean=-0.000013 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.0802876 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.75084e-05 Jy ! Component: 100 - total flux cleaned = 5.84775e-05 Jy ! Component: 150 - total flux cleaned = 7.69095e-05 Jy ! Component: 200 - total flux cleaned = 8.45068e-05 Jy ! Total flux subtracted in 200 components = 8.45068e-05 Jy ! Clean residual min=-0.002496 max=0.003440 Jy/beam ! Clean residual mean=-0.000013 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.0803722 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 67 components and 0.0803722 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=4.54 mas, bpa=30.82 degrees ! Estimated noise=601.398 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.39444e-05 Jy ! Component: 100 - total flux cleaned = 6.51955e-05 Jy ! Component: 150 - total flux cleaned = 6.55503e-05 Jy ! Component: 200 - total flux cleaned = 6.61667e-05 Jy ! Total flux subtracted in 200 components = 6.61667e-05 Jy ! Clean residual min=-0.002102 max=0.002392 Jy/beam ! Clean residual mean=-0.000007 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0804383 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.0804383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078309Jy sigma=0.000670 ! Fit after self-cal, rms=0.078303Jy sigma=0.000670 wmodel J0554+6857_S_2017_07_16_pus_map.mod ! Writing 79 model components to file: J0554+6857_S_2017_07_16_pus_map.mod wobs J0554+6857_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0554+6857_S_2017_07_16_pus_uvs.fits wwins J0554+6857_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J0554+6857_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104384 Jy ! Component: 100 - total flux cleaned = 0.00184643 Jy ! Component: 150 - total flux cleaned = 0.00264032 Jy ! Component: 200 - total flux cleaned = 0.00335657 Jy ! Component: 250 - total flux cleaned = 0.00407131 Jy ! Component: 300 - total flux cleaned = 0.00472205 Jy ! Component: 350 - total flux cleaned = 0.00528462 Jy ! Component: 400 - total flux cleaned = 0.00579697 Jy ! Component: 450 - total flux cleaned = 0.00623456 Jy ! Component: 500 - total flux cleaned = 0.00665996 Jy ! Component: 550 - total flux cleaned = 0.00704483 Jy ! Component: 600 - total flux cleaned = 0.00739208 Jy ! Component: 650 - total flux cleaned = 0.00770388 Jy ! Component: 700 - total flux cleaned = 0.00793189 Jy ! Component: 750 - total flux cleaned = 0.00810552 Jy ! Component: 800 - total flux cleaned = 0.00829858 Jy ! Component: 850 - total flux cleaned = 0.00846323 Jy ! Component: 900 - total flux cleaned = 0.00855513 Jy ! Component: 950 - total flux cleaned = 0.00869016 Jy ! Component: 1000 - total flux cleaned = 0.00877827 Jy ! Component: 1050 - total flux cleaned = 0.00884317 Jy ! Component: 1100 - total flux cleaned = 0.00890671 Jy ! Component: 1150 - total flux cleaned = 0.00890711 Jy ! Component: 1200 - total flux cleaned = 0.0089887 Jy ! Component: 1250 - total flux cleaned = 0.00898878 Jy ! Component: 1300 - total flux cleaned = 0.00904746 Jy ! Component: 1350 - total flux cleaned = 0.00898958 Jy ! Component: 1400 - total flux cleaned = 0.0089522 Jy ! Component: 1450 - total flux cleaned = 0.00897078 Jy ! Component: 1500 - total flux cleaned = 0.00887913 Jy ! Component: 1550 - total flux cleaned = 0.00877105 Jy ! Component: 1600 - total flux cleaned = 0.00875328 Jy ! Component: 1650 - total flux cleaned = 0.00871791 Jy ! Component: 1700 - total flux cleaned = 0.0086142 Jy ! Component: 1750 - total flux cleaned = 0.00861419 Jy ! Component: 1800 - total flux cleaned = 0.00854668 Jy ! Component: 1850 - total flux cleaned = 0.00851338 Jy ! Component: 1900 - total flux cleaned = 0.00841552 Jy ! Component: 1950 - total flux cleaned = 0.00839953 Jy ! Component: 2000 - total flux cleaned = 0.00838337 Jy ! Component: 2050 - total flux cleaned = 0.00836758 Jy ! Component: 2100 - total flux cleaned = 0.00836767 Jy ! Component: 2150 - total flux cleaned = 0.00836756 Jy ! Component: 2200 - total flux cleaned = 0.0083822 Jy ! Component: 2250 - total flux cleaned = 0.00835223 Jy ! Component: 2300 - total flux cleaned = 0.00835213 Jy ! Component: 2350 - total flux cleaned = 0.00827902 Jy ! Component: 2400 - total flux cleaned = 0.00827902 Jy ! Component: 2450 - total flux cleaned = 0.0082363 Jy ! Component: 2500 - total flux cleaned = 0.0082366 Jy ! Component: 2550 - total flux cleaned = 0.00825046 Jy ! Component: 2600 - total flux cleaned = 0.00823642 Jy ! Component: 2650 - total flux cleaned = 0.00822279 Jy ! Component: 2700 - total flux cleaned = 0.00819579 Jy ! Component: 2750 - total flux cleaned = 0.00819578 Jy ! Component: 2800 - total flux cleaned = 0.00820894 Jy ! Component: 2850 - total flux cleaned = 0.00819574 Jy ! Component: 2900 - total flux cleaned = 0.00811808 Jy ! Component: 2950 - total flux cleaned = 0.00811831 Jy ! Component: 3000 - total flux cleaned = 0.00809278 Jy ! Component: 3050 - total flux cleaned = 0.00804245 Jy ! Component: 3100 - total flux cleaned = 0.00804249 Jy ! Component: 3150 - total flux cleaned = 0.00796854 Jy ! Component: 3200 - total flux cleaned = 0.0079198 Jy ! Component: 3250 - total flux cleaned = 0.00784724 Jy ! Component: 3300 - total flux cleaned = 0.00779919 Jy ! Component: 3350 - total flux cleaned = 0.00776339 Jy ! Component: 3400 - total flux cleaned = 0.00766902 Jy ! Component: 3450 - total flux cleaned = 0.00758735 Jy ! Component: 3500 - total flux cleaned = 0.00754117 Jy ! Component: 3550 - total flux cleaned = 0.00749532 Jy ! Component: 3600 - total flux cleaned = 0.00748371 Jy ! Component: 3650 - total flux cleaned = 0.00739321 Jy ! Component: 3700 - total flux cleaned = 0.00731484 Jy ! Component: 3750 - total flux cleaned = 0.00729281 Jy ! Component: 3800 - total flux cleaned = 0.00731491 Jy ! Component: 3850 - total flux cleaned = 0.00726032 Jy ! Component: 3900 - total flux cleaned = 0.00728209 Jy ! Component: 3950 - total flux cleaned = 0.00726045 Jy ! Component: 4000 - total flux cleaned = 0.00719628 Jy ! Component: 4050 - total flux cleaned = 0.00715389 Jy ! Total flux subtracted in 4096 components = 0.00713292 Jy ! Clean residual min=-0.000619 max=0.000780 Jy/beam ! Clean residual mean=-0.000002 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.0875712 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 398 components and 0.0875712 Jy ![Exited script file: muppet] wmap "J0554+6857_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.482 x 4.54 at 30.82 degrees (North through East) ! Clean map min=-0.0013806 max=0.062284 Jy/beam ! Writing clean map to FITS file: J0554+6857_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0622839 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192472 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.927074 0.927074 1.85415 3.7083 7.41659 14.8332 29.6664 59.3327 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.482 x 4.54 at 30.82 degrees (North through East) ! Clean map min=-0.0013806 max=0.062284 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0554+6857_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:02:27 2019