! Started logfile: J0552-4522_S_2017_02_24_pus_uvs.log on Sat May 4 11:19:42 2019 obs J0552-4522_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0552-4522_S_2017_02_24_pus_uva.fits ! AN table 1: 93 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.271924 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0552-4522 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 4552 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0552-4522_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 538 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 523 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 510 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 731 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911106Jy sigma=0.030411 ! Fit after self-cal, rms=0.870060Jy sigma=0.030233 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.516 mas, bmaj=13.43 mas, bpa=-12.62 degrees ! Estimated noise=2505.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0424668 Jy ! Component: 100 - total flux cleaned = 0.0467455 Jy ! Total flux subtracted in 100 components = 0.0467455 Jy ! Clean residual min=-0.029803 max=0.034404 Jy/beam ! Clean residual mean=0.000563 rms=0.010958 Jy/beam ! Combined flux in latest and established models = 0.0467455 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0467455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230542Jy sigma=0.001496 ! Fit after self-cal, rms=0.230366Jy sigma=0.001493 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=19.29 mas, bpa=-10.28 degrees ! Estimated noise=1372.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281534 Jy ! Component: 100 - total flux cleaned = 0.0321872 Jy ! Component: 150 - total flux cleaned = 0.0318912 Jy ! Component: 200 - total flux cleaned = 0.0313452 Jy ! Total flux subtracted in 200 components = 0.0313452 Jy ! Clean residual min=-0.027343 max=0.044422 Jy/beam ! Clean residual mean=0.003146 rms=0.012260 Jy/beam ! Combined flux in latest and established models = 0.0780907 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 15 components and 0.0780907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216942Jy sigma=0.002225 ! Fit after self-cal, rms=0.216952Jy sigma=0.002225 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.64 HN 1.00* KP 0.71 ! LA 0.66 MK 0.61 NL 0.95 OV 0.69 ! PT 0.74 SC 0.97 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.58 HN 1.00* KP 1.10 ! LA 0.63 MK 0.56 NL 0.97 OV 0.83 ! PT 0.73 SC 0.86 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.66 HN 1.00* KP 0.79 ! LA 0.68 MK 0.54 NL 1.13 OV 0.61 ! PT 0.70 SC 1.16 ! ! ! Correcting IF 4. ! A total of 99 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.48 HN 1.00* KP 1.00* ! LA 18.09 MK 0.81 NL 1.00* OV 1.09 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.216952Jy sigma=0.002225 ! Fit after self-cal, rms=0.123779Jy sigma=0.000732 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=17.44 mas, bpa=-7.988 degrees ! Estimated noise=1450.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019598 Jy ! Component: 100 - total flux cleaned = 0.00224801 Jy ! Component: 150 - total flux cleaned = 0.00231856 Jy ! Component: 200 - total flux cleaned = 0.0023847 Jy ! Total flux subtracted in 200 components = 0.0023847 Jy ! Clean residual min=-0.005040 max=0.004588 Jy/beam ! Clean residual mean=-0.000040 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 0.0804754 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.0804754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123683Jy sigma=0.000732 ! Fit after self-cal, rms=0.123054Jy sigma=0.000724 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123054Jy sigma=0.000724 ! Fit after self-cal, rms=0.116969Jy sigma=0.000710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.68 mas, bmaj=17.41 mas, bpa=-8.62 degrees ! Estimated noise=1437.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183026 Jy ! Component: 100 - total flux cleaned = 0.00239164 Jy ! Component: 150 - total flux cleaned = 0.0024184 Jy ! Component: 200 - total flux cleaned = 0.00244266 Jy ! Total flux subtracted in 200 components = 0.00244266 Jy ! Clean residual min=-0.003774 max=0.003314 Jy/beam ! Clean residual mean=0.000036 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.0829181 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0829181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116909Jy sigma=0.000710 ! Fit after self-cal, rms=0.116851Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167397 Jy ! Component: 100 - total flux cleaned = 0.000191237 Jy ! Component: 150 - total flux cleaned = 0.00019343 Jy ! Component: 200 - total flux cleaned = 0.000215796 Jy ! Total flux subtracted in 200 components = 0.000215796 Jy ! Clean residual min=-0.003804 max=0.003344 Jy/beam ! Clean residual mean=0.000040 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.0831339 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.0831339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116833Jy sigma=0.000709 ! Fit after self-cal, rms=0.116846Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116846Jy sigma=0.000709 ! Fit after self-cal, rms=0.116845Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.642 mas, bmaj=16.73 mas, bpa=-8.28 degrees ! Estimated noise=1452.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135368 Jy ! Component: 100 - total flux cleaned = 0.0016318 Jy ! Component: 150 - total flux cleaned = 0.00171966 Jy ! Component: 200 - total flux cleaned = 0.00177979 Jy ! Total flux subtracted in 200 components = 0.00177979 Jy ! Clean residual min=-0.003531 max=0.003172 Jy/beam ! Clean residual mean=0.000041 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.0849137 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0849137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116809Jy sigma=0.000707 ! Fit after self-cal, rms=0.116811Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.30199e-06 Jy ! Component: 100 - total flux cleaned = 3.32715e-05 Jy ! Component: 150 - total flux cleaned = 3.27655e-05 Jy ! Component: 200 - total flux cleaned = 3.23429e-05 Jy ! Total flux subtracted in 200 components = 3.23429e-05 Jy ! Clean residual min=-0.003573 max=0.003168 Jy/beam ! Clean residual mean=0.000041 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.084946 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.084946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116800Jy sigma=0.000707 ! Fit after self-cal, rms=0.116810Jy sigma=0.000707 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116810Jy sigma=0.000707 ! Fit after self-cal, rms=0.117701Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.79 mas, bmaj=44.17 mas, bpa=-3.426 degrees ! Estimated noise=1749.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158668 Jy ! Component: 100 - total flux cleaned = 0.00204048 Jy ! Component: 150 - total flux cleaned = 0.00208848 Jy ! Component: 200 - total flux cleaned = 0.00210233 Jy ! Total flux subtracted in 200 components = 0.00210233 Jy ! Clean residual min=-0.002885 max=0.003437 Jy/beam ! Clean residual mean=0.000066 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.0870483 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 52 components and 0.0870483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117678Jy sigma=0.000707 ! Fit after self-cal, rms=0.117686Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010562 Jy ! Component: 100 - total flux cleaned = 0.000104572 Jy ! Component: 150 - total flux cleaned = 0.000112584 Jy ! Component: 200 - total flux cleaned = 0.000120515 Jy ! Total flux subtracted in 200 components = 0.000120515 Jy ! Clean residual min=-0.002853 max=0.003404 Jy/beam ! Clean residual mean=0.000065 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.0871688 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 55 components and 0.0871688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117686Jy sigma=0.000707 ! Fit after self-cal, rms=0.117694Jy sigma=0.000707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=16.62 mas, bpa=-8.278 degrees ! Estimated noise=1472.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.624 x 16.62 at -8.278 degrees (North through East) ! Clean map min=-0.0068709 max=0.089063 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.493 mas, bmaj=7.896 mas, bpa=-1.527 degrees ! Estimated noise=4207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0640191 Jy ! Component: 100 - total flux cleaned = 0.0826783 Jy ! Component: 150 - total flux cleaned = 0.0868137 Jy ! Component: 200 - total flux cleaned = 0.0883984 Jy ! Total flux subtracted in 200 components = 0.0883984 Jy ! Clean residual min=-0.009934 max=0.009700 Jy/beam ! Clean residual mean=0.000016 rms=0.002521 Jy/beam ! Combined flux in latest and established models = 0.0883984 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0883984 Jy ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=16.62 mas, bpa=-8.278 degrees ! Estimated noise=1472.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110076 Jy ! Component: 100 - total flux cleaned = -0.00131656 Jy ! Component: 150 - total flux cleaned = -0.00143383 Jy ! Component: 200 - total flux cleaned = -0.00148524 Jy ! Total flux subtracted in 200 components = -0.00148524 Jy ! Clean residual min=-0.003519 max=0.003103 Jy/beam ! Clean residual mean=0.000042 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.0869132 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.0869132 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.79 mas, bmaj=44.17 mas, bpa=-3.426 degrees ! Estimated noise=1749.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000471636 Jy ! Component: 100 - total flux cleaned = 0.000454139 Jy ! Component: 150 - total flux cleaned = 0.000438548 Jy ! Component: 200 - total flux cleaned = 0.000411667 Jy ! Total flux subtracted in 200 components = 0.000411667 Jy ! Clean residual min=-0.002777 max=0.003384 Jy/beam ! Clean residual mean=0.000065 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.0873249 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.21331e-05 Jy ! Component: 100 - total flux cleaned = -2.29458e-05 Jy ! Component: 150 - total flux cleaned = -3.33883e-05 Jy ! Component: 200 - total flux cleaned = -4.2639e-05 Jy ! Total flux subtracted in 200 components = -4.2639e-05 Jy ! Clean residual min=-0.002806 max=0.003393 Jy/beam ! Clean residual mean=0.000065 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.0872822 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.0872822 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=16.62 mas, bpa=-8.278 degrees ! Estimated noise=1472.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000228355 Jy ! Component: 100 - total flux cleaned = -0.000273389 Jy ! Component: 150 - total flux cleaned = -0.00031393 Jy ! Component: 200 - total flux cleaned = -0.000348214 Jy ! Total flux subtracted in 200 components = -0.000348214 Jy ! Clean residual min=-0.003592 max=0.003098 Jy/beam ! Clean residual mean=0.000041 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.086934 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.086934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117694Jy sigma=0.000708 ! Fit after self-cal, rms=0.117704Jy sigma=0.000707 wmodel J0552-4522_S_2017_02_24_pus_map.mod ! Writing 57 model components to file: J0552-4522_S_2017_02_24_pus_map.mod wobs J0552-4522_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0552-4522_S_2017_02_24_pus_uvs.fits wwins J0552-4522_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J0552-4522_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132557 Jy ! Component: 100 - total flux cleaned = -0.00170871 Jy ! Component: 150 - total flux cleaned = -0.00220698 Jy ! Component: 200 - total flux cleaned = -0.00267181 Jy ! Component: 250 - total flux cleaned = -0.00310767 Jy ! Component: 300 - total flux cleaned = -0.00355895 Jy ! Component: 350 - total flux cleaned = -0.00394635 Jy ! Component: 400 - total flux cleaned = -0.0042053 Jy ! Component: 450 - total flux cleaned = -0.00434681 Jy ! Component: 500 - total flux cleaned = -0.00441478 Jy ! Component: 550 - total flux cleaned = -0.00461062 Jy ! Component: 600 - total flux cleaned = -0.00467291 Jy ! Component: 650 - total flux cleaned = -0.00467287 Jy ! Component: 700 - total flux cleaned = -0.00467323 Jy ! Component: 750 - total flux cleaned = -0.004702 Jy ! Component: 800 - total flux cleaned = -0.00475688 Jy ! Component: 850 - total flux cleaned = -0.0046761 Jy ! Component: 900 - total flux cleaned = -0.00470291 Jy ! Component: 950 - total flux cleaned = -0.00470294 Jy ! Component: 1000 - total flux cleaned = -0.00472723 Jy ! Component: 1050 - total flux cleaned = -0.0047758 Jy ! Component: 1100 - total flux cleaned = -0.00482259 Jy ! Component: 1150 - total flux cleaned = -0.00482258 Jy ! Component: 1200 - total flux cleaned = -0.00489 Jy ! Component: 1250 - total flux cleaned = -0.00486777 Jy ! Component: 1300 - total flux cleaned = -0.00486786 Jy ! Component: 1350 - total flux cleaned = -0.00486822 Jy ! Component: 1400 - total flux cleaned = -0.00484793 Jy ! Component: 1450 - total flux cleaned = -0.00488888 Jy ! Component: 1500 - total flux cleaned = -0.0049089 Jy ! Component: 1550 - total flux cleaned = -0.00496765 Jy ! Component: 1600 - total flux cleaned = -0.00496731 Jy ! Component: 1650 - total flux cleaned = -0.00496733 Jy ! Component: 1700 - total flux cleaned = -0.00504174 Jy ! Component: 1750 - total flux cleaned = -0.00504181 Jy ! Component: 1800 - total flux cleaned = -0.00502364 Jy ! Component: 1850 - total flux cleaned = -0.00505896 Jy ! Component: 1900 - total flux cleaned = -0.00500641 Jy ! Component: 1950 - total flux cleaned = -0.00500662 Jy ! Component: 2000 - total flux cleaned = -0.00495558 Jy ! Component: 2050 - total flux cleaned = -0.00500638 Jy ! Component: 2100 - total flux cleaned = -0.00498958 Jy ! Component: 2150 - total flux cleaned = -0.00498958 Jy ! Component: 2200 - total flux cleaned = -0.00495688 Jy ! Component: 2250 - total flux cleaned = -0.00492459 Jy ! Component: 2300 - total flux cleaned = -0.00489243 Jy ! Component: 2350 - total flux cleaned = -0.00482855 Jy ! Component: 2400 - total flux cleaned = -0.00471776 Jy ! Component: 2450 - total flux cleaned = -0.00467071 Jy ! Component: 2500 - total flux cleaned = -0.00462387 Jy ! Component: 2550 - total flux cleaned = -0.00453086 Jy ! Component: 2600 - total flux cleaned = -0.00450013 Jy ! Component: 2650 - total flux cleaned = -0.00443889 Jy ! Component: 2700 - total flux cleaned = -0.00434746 Jy ! Component: 2750 - total flux cleaned = -0.00427179 Jy ! Component: 2800 - total flux cleaned = -0.00419651 Jy ! Component: 2850 - total flux cleaned = -0.00410651 Jy ! Component: 2900 - total flux cleaned = -0.00404695 Jy ! Component: 2950 - total flux cleaned = -0.00397267 Jy ! Component: 3000 - total flux cleaned = -0.00389873 Jy ! Component: 3050 - total flux cleaned = -0.00379561 Jy ! Component: 3100 - total flux cleaned = -0.00376621 Jy ! Component: 3150 - total flux cleaned = -0.00370758 Jy ! Component: 3200 - total flux cleaned = -0.00362009 Jy ! Component: 3250 - total flux cleaned = -0.00356191 Jy ! Component: 3300 - total flux cleaned = -0.00350404 Jy ! Component: 3350 - total flux cleaned = -0.00344632 Jy ! Component: 3400 - total flux cleaned = -0.00333119 Jy ! Component: 3450 - total flux cleaned = -0.00328811 Jy ! Component: 3500 - total flux cleaned = -0.00321647 Jy ! Component: 3550 - total flux cleaned = -0.0031451 Jy ! Component: 3600 - total flux cleaned = -0.00308811 Jy ! Component: 3650 - total flux cleaned = -0.00298874 Jy ! Component: 3700 - total flux cleaned = -0.00291795 Jy ! Component: 3750 - total flux cleaned = -0.00288973 Jy ! Component: 3800 - total flux cleaned = -0.00284735 Jy ! Component: 3850 - total flux cleaned = -0.00279097 Jy ! Component: 3900 - total flux cleaned = -0.00276282 Jy ! Component: 3950 - total flux cleaned = -0.00270652 Jy ! Component: 4000 - total flux cleaned = -0.00266437 Jy ! Component: 4050 - total flux cleaned = -0.00262222 Jy ! Total flux subtracted in 4096 components = -0.00258 Jy ! Clean residual min=-0.001128 max=0.000762 Jy/beam ! Clean residual mean=0.000000 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.084354 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 300 components and 0.084354 Jy ![Exited script file: muppet] wmap "J0552-4522_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.624 x 16.62 at -8.278 degrees (North through East) ! Clean map min=-0.0063013 max=0.086879 Jy/beam ! Writing clean map to FITS file: J0552-4522_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0868787 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025538 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.881851 0.881851 1.7637 3.5274 7.05481 14.1096 28.2192 56.4385 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.624 x 16.62 at -8.278 degrees (North through East) ! Clean map min=-0.0063013 max=0.086879 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0552-4522_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:19:47 2019